Search NASA⌕ Search

SEARCH · Search NASA

Results for “preparation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Colloidal Synthesis of Bulk-Bandgap Lead Selenide Nanocrystals

Lead selenide quantum dots (QDs) are low-bandgap IV-VI semiconducting nanomaterials that have been studied for a variety of applications. Their preparation using colloidal methods can create small spherical to larger cubic nanocrystals, with an upper limit of ~17 nm reported to date. Here we describe methods for preparing cubic PbSe nanocrystals over a 20–40 nm size range using a twostep procedure. Specifically, ~10 nm PbSe QDs are generated using the rapid injection method, the products from which are overcoated with additional lead and selenium precursors. The use of two lead reagents were studied; lead oleate resulted in a maximum of 20 nm cubes, while more reactive lead hexyldecanoate resulted in much larger nanomaterials with bulk bandgaps. However, PbSe samples prepared with lead hexyldecanoate also contained agglomerates. Special care must be taken when characterizing larger strained nanomaterials with X-ray powder diffraction, for which the Scherrer equation is inadequate. A more rigorous approach using the Williamson–Hall method provides characterizations that are consistent with electron microscopy analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical investigations on indium oxide nano-particles prepared through precipitation method

Visible light emitting indium oxide nanoparticles were synthesized by precipitation method. Sodium hydroxide dissolved in ethanol was used as a precipitating agent to obtain indium hydroxide precipitates. Precipitates, thus formed were calcined at 600 deg. C for 1 h to obtain indium oxide nanoparticles. The structure of the particles as determined from the X-Ray diffraction pattern was found to be body centered cubic. The phase transformation of the prepared nanoparticles was analyzed using thermogravimetry. Surface morphology of the prepared nanoparticles was analyzed using high resolution-scanning electron microscopy and transmission electron microscopy. The results of the analysis show cube-like aggregates of size around 50 nm. It was found that the nanoparticles have a strong emission at 427 nm and a weak emission at 530 nm. These emissions were due to the presence of singly ionized oxygen vacancies and the nature of the defect was confirmed through Electron paramagnetic resonance analysis.

36 MATERIALS SCIENCE↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Fe/Mo Ordering and Magnetic Properties of Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} (x = 0.9, 1.0, 1.1 and 1.2) Double Perovskites Prepared by Sonochemical Method

Characterization, Fe/Mo ordering and magnetic properties of Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} (x = 0.9, 1.0, 1.1 and 1.2) (CFMO) double perovskite have been studied. Sonochemical methodology is adopted to synthesize Ca{sub 2}Fe{sub x}Mo{sub 2−x}O{sub 6} double perovskite at low temperature (950 {sup ∘} C) under Ar/H{sub 2} atmosphere. Single-phase monoclinic structure by space group P2{sub 1}/n, lattice parameters (a, b and c) and unit cell volume (V ) have been confirmed from X-ray diffraction (XRD) patterns. Average grain sizes of 145 nm with a variation of porosity were observed from scanning electron microscopy (SEM) pictures. Elemental analysis using energy-dispersive X-ray spectroscopy (EDS) confirmed the presence of elements Ca, Fe, Mo and O with no trace of foreign elements, and the compound is found to be pure. Fourier transform infrared spectroscopy (FTIR) data confirmed perovskite formation by identifying three characteristic absorption bands in the wave number range 400–1000 cm{sup − 1} for Mo-O and Fe-O vibrations. Magnetic properties like M{sub s}, M{sub r} and H{sub c} were studied for CFMO series using vibrating sample magnetometer (VSM). Saturation magnetization is found to vary with Fe composition (x).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation Structure and Magnetic Properties of Mn-Doped ZnO Nanoparticles Prepared by Hydrothermal Method

In this research, manganese-doped ZnO (Zn{sub 0.99-x}Mn{sub x}O) nanoparticles were synthesized by hydrothermal method using the chemicals. The samples were annealed at 500 and 600 °C to figure out the optimum annealing temperature characterized by differential thermal analysis (DTA) method. Simultaneously with DTA analysis, the possible weight loss was observed by thermal gravimetric (TG) method and categorized the lost chemicals with varying temperature regions. The crystal structure with lattice parameters and the phases were determined by X-ray diffraction method. Microstrain (ε), stress (σ), the dislocation density (δ), the locality of the atoms and their displacements (u), and the bond length (L) values were calculated by making use of lattice parameters. The particle morphologies were monitored by scanning electron microscope (SEM) technique and the elemental compositions of the samples were investigated and found that all peaks belong to Zn, Mn, and O elements. The magnetic properties of the samples were revealed using Quantum design PPMS measurement system and correlated with structural properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and phase transition of BiFeO{sub 3} cubic micro-particles prepared by hydrothermal method

Graphical abstract: Bismuth ferrite (BiFeO{sub 3}) cubic micro-particles with smooth surfaces were synthesized. BiFeO{sub 3} has a hexagonal perovskite structure with a space group R3c below 370 °C and rhombohedral perovskite structure with a space group R3m below 755 °C, undergoes a phase transition in the temperature range of 755–817 °C to a cubic structure, then decompose to liquid and Fe{sub 2}O{sub 3} above 939 °C. Highlights: ► BiFeO{sub 3} micro-particles with smooth surface were synthesized by hydrothermal method. ► BiFeO{sub 3} enjoys hexagonal structure with well element ratio and chemical valence. ► BiFeO{sub 3} transition from rhombohedral phase to cubic phase lasts 60 °C. -- Abstract: Single-phase bismuth ferrite (BiFeO{sub 3}) powders were synthesized with a hydrothermal method by controlling the experimental conditions carefully. The powder structure, morphology and composition were characterized by using X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscope, Raman measurement and X-ray photoelectron spectroscopy. The particles change from irregular agglomerations to regular cubes with increasing KOH concentration. The large BiFeO{sub 3} cubic particles enjoy much smooth surfaces with well-matched element ratio (Bi:Fe:O = 1:1:3) and chemical valence (Bi{sup 3+}, Fe{sup 3+} and O{sup 2−}). The high temperature XRD and differential scanning calorimetry show that BiFeO{sub 3} powders have a hexagonal perovskite structure with a space group R3c below 370 °C and a rhombohedral structure with a space group R3m below 755 °C. BiFeO{sub 3} undergoes a phase transition in the temperature range of 755–817 °C from rhombohedral structure to a cubic phase, then decomposes to liquid and Fe{sub 2}O{sub 3} above 939 °C.

36 MATERIALS SCIENCE↗

Electrospun nanocomposite fibrous polymer electrolyte for secondary lithium battery applications

Hybrid nanocomposite [poly(vinylidene fluoride -co- hexafluoropropylene) (PVdF-co-HFP)/magnesium aluminate (MgAl{sub 2}O{sub 4})] fibrous polymer membranes were prepared by electrospinning method. The prepared pure and nanocomposite fibrous polymer electrolyte membranes were soaked into the liquid electrolyte 1M LiPF{sub 6} in EC: DEC (1:1,v/v). XRD and SEM are used to study the structural and morphological studies of nanocomposite electrospun fibrous polymer membranes. The nanocomposite fibrous polymer electrolyte membrane with 5 wt.% of MgAl{sub 2}O{sub 4} exhibits high ionic conductivity of 2.80 × 10{sup −3} S/cm at room temperature. The charge-discharge capacity of Li/LiCoO{sub 2} coin cells composed of the newly prepared nanocomposite [(16 wt.%) PVdF-co-HFP+(5 wt.%) MgAl{sub 2}O{sub 4}] fibrous polymer electrolyte membrane was also studied and compared with commercial Celgard separator.

36 MATERIALS SCIENCE↗

Photocatalytic behaviour of CdS/ZnS nanocomposite for dye degradation in presence of visible light

In the present work ZnS-CdS composite was prepared by hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD) to confirm formation of nano particles, Scanning electron microscopy (SEM) images exhibit nanoscale dimensions of as synthesized individual phases. UV/VIS spectra were recorded for evaluation of photophysical properties. The composite was explored as photocatalysts to study dye degradation using methylene blue in aqueous slurry under irradiation of 663 nm wavelength and congo red under irradiation of 493 nm wavelength. Under the same conditions the photocatalytic activity of the individual phases ZnS and CdS were also examined. The ZnS-CdS composite is found in enhancing the rate of photo degradation of toxic dyes as compare to ZnS and CdS individually in presence of visible light. This ZnS based metal sulphide/oxide semiconductor nanocomposites are high potential material for Photo-degradation of toxic dyes, and act as good photocatalyst in visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of precursor concentration on the structural and optical properties of ZnO nanorods prepared by hydrothermal method

Zinc oxide (ZnO) nanorods has attractive properties for nanoscale optoelectronic applications, such as optical sensors, ultraviolet laser diodes, and photodetectors. ZnO nanorods, can be fabricated by simple and low cost chemical approach, such as hydrothermal method. In this method, the morphology, microstructure, optical and electrical properties of ZnO nanorods are highly determined by process parameters such as solvent, deposition time, deposition temperature as well as annealing condition. In this paper we report the fabrication of ZnO nanorods that were grown on transparent conducting indium tin oxide coated glass substrates. Initially, ZnO seed layers were deposited on heated substrates with temperature of 450 °C using ultrasonic spray pyrolysis method with frequency of 1.7 MHz and then grown by hydrothermal method with three different precursor concentrations, namely 0.02 M, 0.06 M, and 0.1 M. The surface morphology and structure were investigated by field emission scanning electron microscope (FESEM) and x-ray diffraction (XRD), while the optical properties were observed by photoluminescence (PL) and and UV VIS reflectance spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel silicon crystals and method for their preparation

Plate shaped silicon crystals and their preparation by pouring a silicon melt into a suitable mold and then allowing it to solidify in a temperature gradient were investigated. The production of energy by direct conversion of solar energy into electrical energy by means of solar cells takes on increasing importance. While this type of energy production is already the prevailing form today in the realm of satellite technology, its terrestrial application has thus far encountered strict limitations owing to the high price of such solar cells. Of the greatest interest in this connection are silicon cells. A substantial reduction in the semiconductor material costs and the costs involved in the further processing to make solar cells are prerequisites for a rational market growth for solar energy.

Authier, B.↗

Method for the preparation of inorganic single crystal and polycrystalline electronic materials

Large area, semiconductor crystals selected from group 3-5 compounds and alloys are provided for semiconductor device fabrication by the use of a selective etching operation which completely removes the substrate on which the desired crystal was deposited. The substrate, selected from the same group as the single crystal, has a higher solution rate than the epitaxial single crystal which is essentially unaffected by the etching solution. The preparation of gallium phosphide single crystals using a gallium arsenide substrate and a concentrated nitric acid etching solution is described.

Groves, W. O.↗

Simple, rapid method for the preparation of isotopically labeled formaldehyde

Isotopically labeled formaldehyde (*C.sup..sctn.H.sub.2O) is prepared from labeled methyl iodide (*C.sup..sctn.H.sub.3I) by reaction with an oxygen nucleophile having a pendant leaving group. The mild and efficient reaction conditions result in good yields of *C.sup..sctn.H.sub.2O with little or no *C isotopic dilution. The simple, efficient production of .sup.11CH.sub.2O is described. The use of the .sup.11CH.sub.2O for the formation of positron emission tomography tracer compounds is described. The reaction can be incorporated into automated equipment available to radiochemistry laboratories. The isotopically labeled formaldehyde can be used in a variety of reactions to provide radiotracer compounds for imaging studies as well as for scintillation counting and autoradiography.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Process for fabricating PBI hollow fiber asymmetric membranes for gas separation and liquid separation

The invention provides methods for preparing an asymmetric hollow fiber, the asymmetric hollow fibers prepared by such methods, and uses of the asymmetric hollow fibers. One method involves passing a polymeric solution through an outer annular orifice of a tube-in-orifice spinneret, passing a bore fluid though an inner tube of the spinneret, dropping the polymeric solution and bore fluid through an atmosphere over a dropping distance, and quenching the polymeric solution and bore fluid in a bath to form an asymmetric hollow fiber.

36 MATERIALS SCIENCE↗

Durable hydrophobic coating composition for metallic surfaces and method for the preparation of the composition

A durable hydrophobic coating composition containing fluorinated silanes for metallic surfaces, such as stainless steel surfaces. The composition includes at least one fluorine-containing silane compound, at least one phosphorus-containing silane compound, and at least one hydrolysable compound. This coating is suitable for condenser tubes, among other applications, to promote dropwise condensation.

36 MATERIALS SCIENCE↗