Search NASA⌕ Search

SEARCH · Search NASA

Results for “reference systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reference Materials for Laser and Xenon Flash Thermal Diffusivity Systems

This report presents the status of current standard reference materials for thermal diffusivity testing. In most thermal properties testing systems, it is common to use standard reference materials to show the reproducibility of the tests and certify the instrument is producing results within expected uncertainty range. The definition of reference materials or standards vary depending on the quality control protocols of the project. For thermal diffusivity, although there were standards available by the National Bureau of Standards (NBS) 40 years ago, there has been no recent NIST standard reference material (SRM). There are only a few sources that produce and provide traceable reference standards for thermal diffusivity. The certificate typically expires in 5 years and only applies to the specific lot of materials. Other reference materials are provided by the testing systems manufacturers. They are mostly well-known reference materials or materials used by the equipment manufacturers with historic data. However, most these reference materials no longer carry valid certificates. Various reference materials will be discussed along with the industry practice when only secondary standards are available.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Interoperable Services to Mitigate Lunar Position, Navigation, and Timing Challenges

Across the Earth, both civilian and government endeavors enjoy a built-in reliance on a position, navigation, and timing (PNT) infrastructure to which they are largely blind. Whether walking, driving, flying, or orbiting, Earth-centric PNT systems that have evolved over decades provide a core functionality to which we have grown accustomed for these pursuits. As NASA joins with other government space agencies and commercial partners to return humans to the Moon in a sustained manner within the current decade, expectations for PNT knowledge and timeliness at the Moon rival those on Earth. The need exists to develop a viable lunar-centric PNT infrastructure to support the planned human and robotic exploits. Navigating within the influence of the Moon presents its own set of challenges. Identification, understanding, and use of a unified reference frame and time system on which navigation is based becomes a fundamental need at the Moon. In addition to the unified foundational elements, measurement liability, dynamic conditions that require Earth-independent autonomous operations, and standards for PNT signals and message-based data exchange each represent distinct challenges to navigation in a burgeoning operational lunar environment. The PNT services planned as part of the lunar communications and navigation relay architecture known as LunaNet aid in surmounting the challenges. LunaNet interoperability specifications stipulate standards for signal parameters, messages, and lunar reference systems for PNT services. Within LunaNet’s defined interoperability resides the concept of a Reference Signal to provide communication signals specifically structured to enable measurement of pseudorange, Doppler, and time transfer by the recipient. One such signal type, the Augmented Forward Signal (AFS), functions as the mainstay for LunaNet PNT, while also serving the data needs for ubiquitous broadcast of network access and rapid unscheduled dissemination of alerts and messages. The presence of a geometrically distributed network of orbiting nodes transmitting the AFS forms the basis for the Lunar Augmented Navigation System (LANS), that delivers both radio navigation and data to multiple users in the lunar environment simultaneously. After reviewing the challenges associated with lunar navigation, this paper will describe the concepts and rationale behind the LunaNet PNT services. By borrowing techniques from Earth-centric Global Navigation Satellite Services (GNSS), the Tracking and Data Relay Satellite System, and the Consultative Committee for Space Data Standards, PNT from LunaNet aids to overcome challenges faced for accurate lunar navigation.

LunaNet↗
NASA NTRSDate not supplied

Interoperable Services to Mitigate Lunar Position, Navigation, and Timing Challenges

Across the Earth, both civilian and government endeavors enjoy a built-in reliance on a position, navigation, and timing (PNT) infrastructure to which they are largely blind. Whether walking, driving, flying, or orbiting, Earth-centric PNT systems that have evolved over decades provide a core functionality to which we have grown accustomed for these pursuits. As NASA joins with other government space agencies and commercial partners to return humans to the Moon in a sustained manner within the current decade, expectations for PNT knowledge and timeliness at the Moon rival those on Earth. The need exists to develop a viable lunar-centric PNT infrastructure to support the planned human and robotic exploits. Navigating within the influence of the Moon presents its own set of challenges. Identification, understanding, and use of a unified reference frame and time system on which navigation is based becomes a fundamental need at the Moon. In addition to the unified foundational elements, measurement liability, dynamic conditions that require Earth-independent autonomous operations, and standards for PNT signals and message-based data exchange each represent distinct challenges to navigation in a burgeoning operational lunar environment. The PNT services planned as part of the lunar communications and navigation relay architecture known as LunaNet aid in surmounting the challenges. LunaNet interoperability specifications stipulate standards for signal parameters, messages, and lunar reference systems for PNT services. Within LunaNet’s defined interoperability resides the concept of a Reference Signal to provide communication signals specifically structured to enable measurement of pseudorange, Doppler, and time transfer by the recipient. One such signal type, the Augmented Forward Signal (AFS), functions as the mainstay for LunaNet PNT, while also serving the data needs for ubiquitous broadcast of network access and rapid unscheduled dissemination of alerts and messages. The presence of a geometrically distributed network of orbiting nodes transmitting the AFS forms the basis for the Lunar Augmented Navigation System (LANS), that delivers both radio navigation and data to multiple users in the lunar environment simultaneously. After reviewing the challenges associated with lunar navigation, this paper will describe the concepts and rationale behind the LunaNet PNT services. By borrowing techniques from Earth-centric Global Navigation Satellite Services (GNSS), the Tracking and Data Relay Satellite System, and the Consultative Committee for Space Data Standards, PNT from LunaNet aids to overcome challenges faced for accurate lunar navigation.

Navigation↗
NASA NTRS1975

Adaptive spacecraft attitude control utilizing eigenaxis rotations

Conventional and adaptive attitude control of spacecraft which use control moment gyros (CMG's) as torque sources are discussed. Control laws predicated on the assumption of a linear system are used since the spacecraft equations of motion are formulated in an 'eigenaxis system' so that they are essentially linear during 'slow' maneuvers even if large angles are involved. The overall control schemes are 'optimal' in several senses. Eigenaxis rotations and a weighted pseudo-inverse CMG steering law are used and, in the adaptive case, a Model Reference Adaptive System (MRAS) controller based on Liapunov's Second Method is adopted. To substantiate the theory, digital simulation results obtained using physical parameters of a Large Space Telescope type spacecraft are presented. These results indicate that an adaptive control law is often desirable.

Cochran, J. E., Jr.↗
NASA NTRS1990

SP-100 nuclear space power systems with application to space commercialization

The technology of the SP-100 space nuclear power system program is compared to that of more familiar solar-power systems. The SP-100 program develops, validates, and demonstrates the technology for space nuclear power systems in the range of 10 to 1000 kilowatts electric for use in future military and civilian space missions. Mission applications, including earth orbiting platforms and lunar/Mars surface power, are enhanced or made possible by SP-100 technology. Attention is given to the SP-100 reference flight system design, the SP-100 nuclear reactor and nuclear-reactor shield, the platform-mounted, tethered, and free-flying reactors, and installation, operation, and disposal options, as well as lunar-Mars surface applications. The SP-100 is presented as one of the nuclear energy sources needed for long-life, compact, lightweight, continuous high power independent of solar orientation, specific orbits, or missions.

Smith, J. M.↗
NASA NTRSDate not supplied

Habitability Potential of Martian Hydrothermal Systems Constrained from Exploration of a Magma-Sediment Hydrothermal System in the Colorado Plateau

Mars has a crust predominately composed of basalt, which displays wide-spread processes including volcanic hydrothermal systems and reference within. There is an abundance of evidence of previous low temperature hydrous alteration; however, finding evidence of high-temperature hydrothermal activity has been challenging. Therefore, we are investigating a mafic dike and the surrounding metamorphic contact zone to constrain how to find such systems on Mars and their habitability potential on Earth and by extension Mars. DC Dike (DCD) is in the Colorado Plateau, in south-central Utah, and intruded the Entrada formation Sandstone between 3.8 and 4.6 Ma. We chose Mars analog instrumentation to make our results directly applicable to those on Mars: Visible-Near Infrared reflectance spectroscopy (VNIR), X-Ray Diffraction (XRD), and Scanning Electron Microscope (SEM). 21 samples were analyzed with an Ore Express VNIR with wavelengths from 350-2500 nm. Bulk mineralogy is determined by using a Panalytical XRD including for clay fraction and soil separation analysis. Finally, samples are prepped as thin sections and will be analyzed using a SEM. All these techniques will be used to constrain: the mineralogy of the system, how the hydrothermal system cooled, the habitability of the cooling system, and how DCD relates to similar dikes in the area and on Mars. All of these results will then be compared to similar systems Mars, and if they too could have been habitable environments.

R. A. Slank↗
NASA NTRS1979

Digital adaptive control laws for VTOL aircraft

Honeywell has designed a digital self-adaptive flight control system for flight test in the VALT Research Aircraft (a modified CH-47). The final design resulted from a comparison of two different adaptive concepts: one based on explicit parameter estimates from a real-time maximum likelihood estimation algorithm and the other based on an implicit model reference adaptive system. The two designs are compared on the basis of performance and complexity.

Hartmann, G. L.↗
NASA NTRS1986

CSTAR star catalogue development

The Continuous Stellar Tracking Attitude Reference (CSTAR) system is an in-house project for the Space Station to provide high accuracy, drift free attitude and angular rate information for the GN&C system. Constraints exist on the star catalogue incorporated in the system. These constraints include the following: mass memory allocated for catalogue storage, star tracker imaging sensitivity, the minimum resolvable separation angle between stars, the width of the field of view of the star tracker, and the desired number of stars to be tracked in a field of view. The Smithsonian Astrophysical Observatory (SAO) catalogue is the basis reference for this study. As it stands, the SAO does not meet the requirements of any of the above constraints. Star selection algorithms have been devised for catalogue optimization. Star distribution statistics have been obtained to aid in the development of these rules. VAX based software has been developed to implement the star selection algorithms. The software is modular and provides a design tool to tailor the catalogue to available star tracker technology. The SAO catalogue has been optimized for the requirements of the present CSTAR system.

Uhde-Lacovara, J. A.↗
NASA NTRS1974

An occultation satellite system for determining pressure levels in the atmosphere

A two-satellite microwave occultation system is described that will fix, as an absolute function of altitude, the pressure-temperature profile generated by a passive infrared sounder. The 300 mb pressure level is determined to within 24 m rms, assuming the temperture errors produced by the infrared sensor are not greater than 2 K rms. Error caused by water vapor in the radio path is corrected by climatological adjustments. A ground test of the proposed system is described. A microwave signal propagating between two mountain tops was found to be subject to periods of intense fading. Computer analysis of the raypath between the transmitting and receiving stations indicates that multipath and defocusing were responsible for this fading. It is unlikely that an operational pressure-reference-level system will be subject to the deep fades observed in the ground test, because the phenomena are associated with lower altitudes than the closest approach altitude of an occultation-system raypath.

Morrison, A. R.↗
NASA NTRS2011

System and method for tuning adjusting the central frequency of a laser while maintaining frequency stabilization to an external reference

A method and system for stabilizing a laser to a frequency reference with an adjustable offset. The method locks a sideband signal generated by passing an incoming laser beam through the phase modulator to a frequency reference, and adjusts a carrier frequency relative to the locked sideband signal by changing a phase modulation frequency input to the phase modulator. The sideband signal can be a single sideband (SSB), dual sideband (DSB), or an electronic sideband (ESB) signal. Two separate electro-optic modulators can produce the DSB signal. The two electro-optic modulators can be a broadband modulator and a resonant modulator. With a DSB signal, the method can introduce two sinusoidal phase modulations at the phase modulator. With ESB signals, the method can further drive the optical phase modulator with an electrical signal with nominal frequency OMEGA(sub 1) that is phase modulated at a frequency OMEGA(sub 2)

Livas, Jeffrey↗
NASA NTRS2013

Cloud Absorption Radiometer Autonomous Navigation System - CANS

CAR (cloud absorption radiometer) acquires spatial reference data from host aircraft navigation systems. This poses various problems during CAR data reduction, including navigation data format, accuracy of position data, accuracy of airframe inertial data, and navigation data rate. Incorporating its own navigation system, which included GPS (Global Positioning System), roll axis inertia and rates, and three axis acceleration, CANS expedites data reduction and increases the accuracy of the CAR end data product. CANS provides a self-contained navigation system for the CAR, using inertial reference and GPS positional information. The intent of the software application was to correct the sensor with respect to aircraft roll in real time based upon inputs from a precision navigation sensor. In addition, the navigation information (including GPS position), attitude data, and sensor position details are all streamed to a remote system for recording and later analysis. CANS comprises a commercially available inertial navigation system with integral GPS capability (Attitude Heading Reference System AHRS) integrated into the CAR support structure and data system. The unit is attached to the bottom of the tripod support structure. The related GPS antenna is located on the P-3 radome immediately above the CAR. The AHRS unit provides a RS-232 data stream containing global position and inertial attitude and velocity data to the CAR, which is recorded concurrently with the CAR data. This independence from aircraft navigation input provides for position and inertial state data that accounts for very small changes in aircraft attitude and position, sensed at the CAR location as opposed to aircraft state sensors typically installed close to the aircraft center of gravity. More accurate positional data enables quicker CAR data reduction with better resolution. The CANS software operates in two modes: initialization/calibration and operational. In the initialization/calibration mode, the software aligns the precision navigation sensors and initializes the communications interfaces with the sensor and the remote computing system. It also monitors the navigation data state for quality and ensures that the system maintains the required fidelity for attitude and positional information. In the operational mode, the software runs at 12.5 Hz and gathers the required navigation/attitude data, computes the required sensor correction values, and then commands the sensor to the required roll correction. In this manner, the sensor will stay very near to vertical at all times, greatly improving the resulting collected data and imagery. CANS greatly improves quality of resulting imagery and data collected. In addition, the software component of the system outputs a concisely formatted, high-speed data stream that can be used for further science data processing. This precision, time-stamped data also can benefit other instruments on the same aircraft platform by providing extra information from the mission flight.

Kahle, Duncan↗
NASA NTRS2006

A Reference Architecture for Space Information Management

We describe a reference architecture for space information management systems that elegantly overcomes the rigid design of common information systems in many domains. The reference architecture consists of a set of flexible, reusable, independent models and software components that function in unison, but remain separately managed entities. The main guiding principle of the reference architecture is to separate the various models of information (e.g., data, metadata, etc.) from implemented system code, allowing each to evolve independently. System modularity, systems interoperability, and dynamic evolution of information system components are the primary benefits of the design of the architecture. The architecture requires the use of information models that are substantially more advanced than those used by the vast majority of information systems. These models are more expressive and can be more easily modularized, distributed and maintained than simpler models e.g., configuration files and data dictionaries. Our current work focuses on formalizing the architecture within a CCSDS Green Book and evaluating the architecture within the context of the C3I initiative.

information systems↗
NASA NTRS1981

Manned geosynchronous mission requirements and systems analysis study extension. Volume 1: Executive summary

A study was performed to determine the types of manned missions that will likely be performed in the late 1980's or early 1990's timeframe, to define MOTV configurations which satisfy these missions requirements, and to develop a program plan for its development. Twenty generic missions were originally defined for MOTV but, to simplify the selection process, five of these missions were selected as typical and used as Design Reference Missions. Systems and subsystems requirements were re-examined and sensitivity analyses performed to determine optimum point designs. Turnaround modes were considered to determine the most effective combination of ground based and spaced based activities. A preferred concept for the crew capsule and for the mission mode was developed.

Source record↗
NASA NTRS1992

Fuel cell technology for lunar surface operations

Hydrogen-oxygen fuel cells have been shown, in several NASA and contractor studies, to be an enabling technology for providing electrical power for lunar bases, outposts, and vehicles. The fuel cell, in conjunction with similar electrolysis cells, comprises a closed regenerative energy storage system, commonly referred to as a regenerative fuel cell (RFC). For stationary applications, energy densities of 1,000 watt-hours per kilograms an order of magnitude over the best rechargeable batteries, have been projected. In this RFC, the coupled fuel cell and electrolyzer act as an ultra-light battery. Electrical energy from solar arrays 'charges' the system by electrolyzing water into hydrogen and oxygen. When an electrical load is applied, the fuel cell reacts the hydrogen and oxygen to 'discharge' usable power. Several concepts for utilizing RFC's, with varying degrees of integration, have been proposed, including both primary and backup roles. For mobile power needs, such as rovers, an effective configuration may be to have only the fuel cell located on the vehicle, and to use a central electrolysis 'gas station'. Two fuel cell technologies are prime candidates for lunar power system concepts: alkaline electrolyte and proton exchange membrane. Alkaline fuel cells have been developed to a mature production power unit in NASA's Space Shuttle Orbiter. Recent advances in materials offer to significantly improve durability to the level needed for extended lunar operations. Proton exchange membrane fuel cells are receiving considerable support for hydrospace and terrestrial transportation applications. This technology promises durability, simplicity, and flexibility.

Deronck, Henry J.↗
NASA NTRS1971

Study of automatic flare and decrab guidance and control system for the space shuttle

The automatic landing of an unpowered space shuttle vehicle was studied along with the design of the guidance and flight controls, selection of the ground reference component of the landing system (signals in space), and evaluation of the performance of the overall system. The study was carried out by means of an all-digital simulation which incorporated wind shears, gusts and error models for the hardware components. The performance of the landing system operating in winds and turbulence and with hardware errors was determined by Monte Carlo techniques. It was found that the interactions of turbulence and vehicle characteristics were the limiting factors on system performance. The touchdown errors due to the measurement errors of the ground reference system were less significant. The guidance designed was predictive in the longitudinal direction and fixed path in the lateral direction.

Cockayne, W.↗
NASA NTRS1972

Experimental evaluation of a volts-per-hertz reference circuit for the isotope Brayton system

In Brayton-cycle power systems, the speed decreases rapidly with overload. If the voltage decreases linearly with speed (frequency), the power decreases as the square of the voltage. This makes the system more tolerant of overloads. A volts-per-hertz reference circuit, consisting of a volts-per-hertz sensor and a voltage limiter, was designed and fabricated. This reference circuit was incorporated in an existing voltage regulator to control a turbine-driven alternator. Test results show that the control does function to reduce voltage at speeds below the rated speed and that it performed successfully during transients.

Wimmer, H. L.↗
NASA NTRS1971

Electrochemical studies in aluminum chloride melts

A melt purification system was developed which produces a final melt far superior electrochemically than those previously reported. A residual current of less than 2 microamps/sq mn at a sweep rate of 0.5 V/sec was used as the criteria for a pure melt. The use of a second purified bulk melt and a heated pipette permitted the rapid exchange of working electrode compartments while retaining the same reference electrode system. The major portion of the work was carried out in the 1:1 AlCl3:NaCl melt at 175 and 200 C. Several measurements were made in the 2:1 melt and a few on the silver systems in intermediate compositions. Programs for PDP-8I and PDP-12 digital computers and the required electronic circuitry systems were developed to carry out various electrochemical measurements in the melt. A pair of 50 yard transmission lines were used to connect the computer to the experiment. Ensemble averaging and digital, least squares smoothing are used within the programs to improve the signal-to-noise ratio by at least an order of magnitude. Some of the computerized electrochemcial techniques used to examine the different systems were pulse polarography, double pulse polarography, staircase voltammetry, kinetic double potential step chronoamperometry and double potential step chronocoulometry.

Osteryoung, R. A.↗