Range safety data for Saturn SA-10
Saturn SA-10 range safety data, and reliability analysis of S-IV-8 and S-IV-10 stages
RANGE SAFETY↗
SEARCH · Search NASA
Results for “reliability data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Punch-magnet delay eliminated by modification of circuit
Reduction of retardation by diode-resistor networks of the current-decay time of a punch magnet by connection of a Zener diode in series with the damping network increases the reliability of data on paper tape.
Cohn, C. E.↗
Construction of convolutional codes for sequential decoding
Convolutional encoding and sequential decoding of digital data for reliable transmission
Costello, D. J., Jr.↗
Millimeter wave propagation measurements using the ATS 5 satellite
The ATS 5 millimeter wave propagation experiment determines long- and short-term attenuation statistics of operational millimeter wavelength earthspace links as functions of defined meteorological conditions. A preliminary analysis of results with 15 GHz downlink and 32 GHz uplink frequency bands indicates that both frequency bands exhibit an excellent potential for utilization in reliable high data rate earth-space communications systems.
Ippolito, L. J.↗
Performance results for a hybrid coding system.
Results of computer simulation studies of the hybrid pull-up bootstrap decoding algorithm, using a constraint length 24, nonsystematic, rate 1/2 convolutional code for the symmetric channel with both binary and eight-level quantized outputs. Computational performance was used to measure the effect of several decoder parameters and determine practical operating constraints. Results reveal that the track length may be reduced to 500 information bits with small degradation in performance. The optimum number of tracks per block was found to be in the range from 7 to 11. An effective technique was devised to efficiently allocate computational effort and identify reliably decoded data sections. Long simulations indicate that a practical bootstrap decoding configuration has a computational performance about 1.0 dB better than sequential decoding and an output bit error rate about .0000025 near the R sub comp point.
Hoffman, L. B.↗
Aluminium. II - A review of deformation properties of high purity aluminium and dilute aluminium alloys.
The elastic and plastic deformation behavior of high-purity aluminum and of dilute aluminum alloys is reviewed. Reliable property data, including elastic moduli, elastic coefficients, tensile, creep, fatigue, hardness, and impact are presented. Single crystal tensile results are discussed. Rather comprehensive reference lists, containing publications of the past 20 years, are included for each of the above categories. Defect structures and mechanisms responsible for mechanical behavior are presented. Strengthening techniques (alloys, cold work, irradiation, quenching, composites) and recovery are briefly reviewed.
Reed, R. P.↗
Assessment of and standardization for quantitative nondestructive test
Present capabilities and limitations of nondestructive testing (NDT) as applied to aerospace structures during design, development, production, and operational phases are assessed. It will help determine what useful structural quantitative and qualitative data may be provided from raw materials to vehicle refurbishment. This assessment considers metal alloys systems and bonded composites presently applied in active NASA programs or strong contenders for future use. Quantitative and qualitative data has been summarized from recent literature, and in-house information, and presented along with a description of those structures or standards where the information was obtained. Examples, in tabular form, of NDT technique capabilities and limitations have been provided. NDT techniques discussed and assessed were radiography, ultrasonics, penetrants, thermal, acoustic, and electromagnetic. Quantitative data is sparse; therefore, obtaining statistically reliable flaw detection data must be strongly emphasized. The new requirements for reusable space vehicles have resulted in highly efficient design concepts operating in severe environments. This increases the need for quantitative NDT evaluation of selected structural components, the end item structure, and during refurbishment operations.
Neuschaefer, R. W.↗
Dynamics of playa lakes in the Texas High Plains
The author has identified the following significant results. ERTS-1 MSS imagery has been found useful for taking a regional wet census of the tens of thousands of lake basins on the Southern High Plains, Texas and New Mexico. Once the ground truth which has been correlated with the MSS imagery, is correlated with CCT data, and reliable computer classifications are determined, a lake census from CCT printouts will be possible. Correlation of satellite imagery products with water fluctuations and water budget is also underway.
Reeves, C. C., Jr.↗
Design of a modular digital computer system, DRL 4
The design is reported of an advanced modular computer system designated the Automatically Reconfigurable Modular Multiprocessor System, which anticipates requirements for higher computing capacity and reliability for future spaceborne computers. Subjects discussed include: an overview of the architecture, mission analysis, synchronous and nonsynchronous scheduling control, reliability, and data transmission.
Source record↗
Power spectral density analysis of the electromyogram from a work task performed in a full pressure suit
Surface electromyograms (EMG) taken from three upper torso muscles during a push-pull task were analyzed by a power spectral density technique to determine the utility of the spectral analysis for identifying changes in the EMG caused by muscular fatigue. The results confirmed the value of the frequency analysis for identifying fatigue producing muscular performance. Data revealed reliable differences between muscles in fatigue induced responses to various locations in the reach envelope at which the subjects were required to perform the push-pull exercise, and the differential sensitivity of individual muscles to the various reach positions; i.e., certain reach positions imposed more fatigue related shifts in EMG power than did others. It was found that a pressurized space suit changed the pattern of normal shirtsleeve muscle fatigue responses in all three of the muscles.
Lafevers, E. V.↗
A thermal vacuum-UV solar simulator test system for assessing microbiological viability
Microorganisms were exposed to a simulated space environment in order to assess the photobiological effect of broad spectrum, nonionizing solar electromagnetic radiation in terms of viability. A thermal vacuum chamber capable of maintaining a vacuum of 0.000133n/sq m and an ultraviolet rich solar simulator were the main ingredients of the test system. Results to date indicate the system to be capable of providing reliable microbiological data.
Ross, D. S.↗
Performance of coded MFSK in a Rician fading channel
The performance of convolutional codes in conjunction with noncoherent multiple frequency shift-keyed (MFSK) modulation and Viterbi maximum likelihood decoding on a Rician fading channel is examined in detail. While the primary motivation underlying this work has been concerned with system performance on the planetary entry channel, it is expected that the results are of considerably wider interest. Particular attention is given to modeling the channel in terms of a few meaningful parameters which can be correlated closely with the results of theoretical propagation studies. Fairly general upper bounds on bit error probability performance in the presence of fading are derived and compared with simulation results using both unquantized and quantized receiver outputs. The effects of receiver quantization and channel memory are investigated and it is concluded that the coded noncoherent MFSK system offers an attractive alternative to coherent BPSK in providing reliable low data rate communications in fading channels typical of planetary entry missions.
Modestino, J. W.↗
Microprocessor-based cardiopulmonary monitoring system
The system uses a dedicated microprocessor for transducer control and data acquisition and analysis. No data will be stored in this system, but the data will be transmitted to the onboard data system. The data system will require approximately 12 inches of rack space and will consume only 100 watts of power. An experiment specific control panel, through a series of lighted buttons, will guide the operator through the test series providing a smaller margin of error. The experimental validity of the system was verified, and the reproducibility of data and reliability of the system checked. In addition, ease of training, ease of operator interaction, and crew acceptance were evaluated in actual flight conditions.
Source record↗
Trace element contents of selected antarctic meteorites, 1
Data are reported for volatile/mobile Ag, As, Au, Bi, Cd, Co, Cs, Cu, Ga, In, Rb, Sb, Se, Te, T1 and Zn in exterior and/or interior samples of four Antarctic meteorites: 77005 (unique achondrite); 77257 (unreilite); 77278 (L3); 77299 (H3). Exterior samples reflect contamination and/or leaching by weathering but trace element (ppm-ppt) contents in interior samples seem reasonable for representatives of these rare meteoritic types. The 77005 achondrite seems related to shergottites; other samples extend compositional ranges previously known for their types. With suitable precautions, Antarctic meteorite finds yield trace element data as reliable as those obtained from previously known falls.
Biswas, S.↗
Remote sensing analysis of water quality and the entrapment zone in the San Francisco Bay and delta
The author has identified the following significant results. Data from an ocean color scanner flown on a U-2 aircraft at 65,000 ft and from LANDSAT MSS were enhanced to identify biologically active areas of San Francisco Bay, and to determine the salinity, turbidity, chlorophylls, and suspended solids. The best fit regression models for mapping water quality parameters were based on bands 3, 5, 7, and 10. Comparision of the results indicate that chlorophyll concentrations can best be estimated by the OCS or MSS data. Salinity can best be estimated by OCS data; turbidity can best be estimated by LANDSAT data. Neither OCS nor MSS data provide reliable basis for estimating suspended solids. Aerial photography of the highest quality taken with either conventional color or infrared-sensitive color films was unable to locate the biologically active areas.
Colwell, R. N.↗
Trace element contents of selected Antarctic meteorites. I - Weathering effects and ALH A77005, A77257, A77278 and A 77299
Data is examined for volatile/mobile Ag, As, Au, Bi, Cd, Co, Cs, Cu, Ga, In, Rb, Sb, Se, Te, Tl and Zn in exterior and/or interior samples of four Antarctic meteorites from the Allan Hills (ALH): A77005 (unique achondrite); A77257 (ureilite); A77278 (L3); A77299 (H3). Exterior samples reflect contamination and/or leaching by weathering but trace element (ppm-ppt) contents in interior samples seem reasonable for representatives of these rare meteoritic types. The A77005 achondrite is shown to be related to shergottites; other samples extend compositional ranges previously known for their groups or types. With suitable precautions, Antarctic meteorite finds yield trace element data as reliable as those obtained from previously known falls.
Biswas, S.↗
Synthetic battery cycling
The use of interactive computer graphics is suggested as an aid in battery system development. Mathematical representations of simplistic but fully representative functions of many electrochemical concepts of current practical interest will permit battery level charge and discharge phenomena to be analyzed in a qualitative manner prior to the assembly and testing of actual hardware. This technique is a useful addition to the variety of tools available to the battery system designer as he bridges the gap between interesting single cell life test data and reliable energy storage subsystems.
Thaller, L. H.↗
Synthetic battery cycling
The trend in energy storage is toward systems with high-voltage and high-power outputs. These conditions accentuate the cumulative effects of small differences in characteristics from cell to cell in any large multicell battery. These considerations are of particular concern with a number of emerging electrochemical concepts where convenient overcharge reactions do not exist. The use of interactive computer graphics is suggested as an aid in battery system development. Mathematical representations of simplistic but fully representative functions of many electrochemical concepts of current practical interest will permit battery-level charge and discharge phenomena to be analyzed in a qualitative manner prior to the assembly and testing of actual hardware. This technique will be a useful addition to the variety of tools available to the battery system designer as he bridges the gap between interesting single-cell life test data and reliable energy storage subsystems.
Thaller, L. H.↗