Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys

For this research temperature dependent thermophysical properties, including specific heat capacity, lattice thermal expansion, thermal diffusivity and conductivity, have been systematically studied in Ni and eight Ni-containing single-phase face-centered-cubic concentrated solid solution alloys, at elevated temperatures up to 1273 K. The alloys have similar specific heat values of 0.4–0.5 J·g -1 ·K -1 at room temperature, but their temperature dependence varies greatly due to Curie and K-state transitions. The lattice, electronic, and magnetic contributions to the specific heat have been separated based on first-principles methods in NiCo, NiFe, Ni-20Cr and NiCoFeCr. The alloys have similar thermal expansion behavior, with the exception that NiFe and NiCoFe have much lower thermal expansion coefficient in their ferromagnetic state due to magnetostriction effects. Calculations based on the quasi-harmonic approximation accurately predict the temperature dependent lattice parameter of NiCo and NiFe with < 0.2% error, but underestimated that of Ni-20Cr by 1%, compared to the values determined from neutron diffraction. In addition, all the alloys containing Cr have very similar thermal conductivity, which is much lower than that of Ni and the alloys without Cr, due to the large magnetic disorder.

36 MATERIALS SCIENCE↗

Mixtures of CO 2 and poly(fluoroacrylate) based on monomers containing only six or four fluorinated carbons: Phase behavior and solution viscosity

In this study, homopolymerization of fluoroacrylate monomers containing a segment with eight fluorinated carbons, (CH 2 CHCOO(CH 2 ) 2 (CF 2 ) 7 CF 3 ), yield poly(fluoroacrylate) (PFA) with remarkably high solubility in CO 2 , but the corresponding ultimate PFA degradation product perfluorooctanoic acid (PFOA) is bio-accumulative. Based on cloud point loci in the 1–4 wt% PFA in CO 2 concentration range at temperatures of 25, 50, 75, 100 and 125°C, it is shown that C 6 F 13 -based and C 4 F 9 -based PFA, with relatively benign degradation products perfluorohexanoic acid (PFHxA) and perfluorobutanoic acid (PFBA), respectively, retain the same level of CO 2 -solubility as that of C 8 F 17 -based PFA. Further, both C 6 F 13 -based and C 4 F 9 -based PFA can increase the viscosity of single-phase CO 2 -PFA solutions (i.e. thicken CO 2 ) as much as C 8 F 17 -based PFA in the 25–125°C range. Therefore, the design of CO 2 -soluble PFA need not be constrained to monomers containing the C 8 F 17 moiety; fluoroacrylate monomers containing shorter fluoroalkyl segments with only four or six fluorocarbons can be utilized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and Optical Properties of Au–Co Solid Solution and Phase-Separated Thin Films and Nanoparticles

The chemical composition and morphology of Au x Co 1–x thin films and nanoparticles are controlled via a combination of cosputtering, pulsed laser-induced dewetting (PLiD), and annealing, leading to tunable magnetic and optical properties. Regardless of chemical composition, the as-deposited thin films and as-PLiD nanoparticles are found to possess a face-centered cubic (FCC) Au x Co 1–x solid-solution crystal structure. Annealing results in large phase-separated grains of Au and Co in both the thin films and nanostructures for all chemical compositions. The magnetic and optical properties are characterized via vibrating sample magnetometry (VSM), ellipsometry, optical transmission spectroscopy, and electron energy loss spectroscopy (EELS). Despite the exceptionally high magnetic anisotropy inherent to Co, the presence of sufficient Au (72 atom %) in the Au x Co 1–x solid solution results in superparamagnetic thin films. Among the as-PLiD nanoparticle samples, an increased Co composition leads to a departure from traditional ferromagnetism in favor of wasp-waisted hysteresis caused by magnetic vortices. Phase separation resulting from annealing leads to ferromagnetism for all compositions in both the thin films and nanoparticles. The optical properties of Au x Co 1–x nanostructures are also largely influenced by the chemical morphology, where the Au x Co 1–x intermixed solid solution has significantly damped plasmonic performance relative to pure Au and comparable to pure Co. Phase separation greatly enhances the quality factor, optical absorption, and electron energy loss spectroscopy (EELS) signatures. The enhancement of the localized surface plasmon resonances (LSPRs) scales with the reduction in Co composition, despite EELS evidence that excitation of the Co portions of a nanoparticle can provide a similar, and in some instances enhanced, LSPR resonance compared to Au. This behavior, however, is seemingly limited to the LSPR dipole mode, while higher-order modes are greatly damped by a Co aloof position. As a result, this observed magneto-plasmonic functionality and tunability could be applicable in biomedicine, namely, cancer therapeutics.

annealing (metallurgy)↗

Nucleation and phase transformation pathways in electrolyte solutions investigated by in situ microscopy techniques

Identification of crystal nucleation and growth pathways is of fundamental importance for synthesis of functional materials, which requires control over size, orientation, polymorph, and hierarchical structure, often in the presence of additives used to tune the energy landscape defining these pathways. Furthermore we summarize the recent progress in application of in situ TEM and AFM techniques to monitor or even tune the pathway of crystal nucleation and growth.

36 MATERIALS SCIENCE↗

A twist grain boundary phase in aqueous solutions of the nucleic acid tetramer GTAC

At high concentration, long Watson/Crick (WC) double-helixed DNA forms columnar crystal or liquid crystal phases of linear, parallel duplex chains packed on periodic lattices. This can also be a structural motif of short NA oligomers such as the 5’-GTAC-3’ studied here, which makes four-base WC duplexes having hydrophobic blunt ends. End-to-end aggregation then assembles these duplexes into columns and columnar phases are stabilized, in spite of breaks in the double helix every four bases. But the new degrees of freedom introduced by such breaks also enable opportunities for a more diverse palette of self-assembly modes, producing striking self-assemblies of DNA that would not be achievable with contiguous polymers. These include recently reported three-dimensional (3D) periodic low-density nanoscale networks of GCCG, and the twist grain boundary (TGB) phase presented here. In the TGB, columns of GTAC pairs assemble into monolayer sheets in which the duplex columns are mutually parallel. However, unlike in the columnar crystals, these sheets stack in helical fashion into lamellar arrays in which the column axis of each layer is rotated through a 60° angle with respect to the columns in neighboring layers. This assembly of DNA is unique in that it the fills a 3D volume wherein the major grooves of columns in each layer mutually enter and interlock with the major grooves of columns in neighboring layers. This locking is optimized by small adjustments in structure enabled by the breaks in the duplex backbones.

DNA↗

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

Microstructure formation of a hypo-eutectic Al-11Cu (atom percent) alloy during solidification after laser melting has been studied by transmission electron microscopy (TEM). The evolution of the solid-liquid-interface velocity, V SL , during the solidification process has been determined from direct observation by in-situ TEM. This enabled correlating V SL with development of four distinct microstructure zones. Crystal growth mode transitions from planar to cellular, cellular to dendritic, dendritic to cellular, and cellular to planar, have been observed for the accelerating solid-liquid-interface. The transition from coupled two-phase growth to the single-phase growth occurred for V SL = V a = (0.80±0.05) m/s, where V a is the velocity of absolute stability, at the onset of banded morphology grain formation. The in-situ and post-mortem TEM uniquely permitted determination of the non-equilibrium solidus for the rapidly solidifying Al-11Cu alloy. Experimental evidence for solute clustering and chemical ordering tendencies at length scales on the order of ≤ 5nm has been detected in the single-phase regions of the banded grains. The structural features of the single-phase bands have been interpreted as signatures of ‘frozen in’ configurations present in the liquid boundary layer adjacent to the growing crystal, which has a width of about 3nm. Finally, the nano-scale spatiotemporal resolution experimental TEM studies performed here provided quantitative metrics, e.g. the solidification interface velocity dependent solute concentration of the α-Al phase and the near-atomic scale structure in the single-phase bands, that are uniquely suitable for comparison with theory and model predictions for solidification microstructure development in multicomponent alloys after laser melting.

36 MATERIALS SCIENCE↗

Methods and systems for treating liquids using switchable solvents

A method of treating a liquid. The method comprises providing a feed liquid comprising at least one solvent and at least one solute to a first side of a membrane. A single-phase draw solution comprising at least one of an aminium salt, an amidinium salt, and a guanidinium salt is provided to a second side of the membrane. The at least one solvent is osmosed across the membrane and into the single-phase draw solution to form a diluted single-phase draw solution. At least one of CO2, CS2, and COS is removed from the diluted single-phase draw solution to form a first multiple-phase solution comprising a first liquid phase comprising the at least one solvent, and a second liquid phase comprising at least one of an amine compound, an amidine compound, and a guanidine compound. A liquid purification system is also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graph neural networks predict energetic and mechanical properties for models of solid solution metal alloy phases

Here, we developed a PyTorch-based architecture called HydraGNN that implements graph convolutional neural networks (GCNNs) to predict the formation energy and the bulk modulus for models of solid solution alloys for various atomic crystal structures and relaxed volumes. We trained the GCNN surrogate model on a dataset for nickel–niobium (NiNb) generated by the embedded atom model (EAM) empirical interatomic potential for demonstration purposes. The dataset was generated by calculating the formation energy and the bulk modulus as a prototypical elastic property for optimized geometries starting from initial body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal compact packed (HCP) crystal structures, with configurations spanning the possible compositional range for each of the three types of initial crystal structures. Numerical results show that the GCNN model effectively predicts both the formation energy and the bulk modulus as function of the optimized crystal structure, relaxed volume, and configurational entropy of the model structures for solid solution alloys.

36 MATERIALS SCIENCE↗

Fabrication of platinum nanoparticles in aqueous solution and solid phase using amphiphilic PB-b-PEO copolymer nanoreactors

Graphical abstract: TEM image of Pt nanoparticles produced by reducing by NaBH{sub 4} within PB-b-PEO micelles in aqueous media (scale bar 1 nm). - Highlights: • Pt nanoparticles were synthesized within amphiphilic diblock copolymer micelles. • The effects of reducing agents and precursor dose on Pt np size were investigated. • The effect on fabrication of Pt np by reducing in aqueous and solid phases was compared. • The size of nanoparticles was about 1.4 nm for all doses and reducing agents types. - Abstract: Fabrication of Pt nanoparticles using an amphiphilic copolymer template in aqueous solution was achieved via polybutadiene-block-polyethyleneoxide copolymer micelles, which acted as nanoreactors. In addition, Pt nanoparticles were synthesized using hydrogen gas as the reducing agent in solid state for the first time to compare against solution synthesis. The influences of loaded precursor salt amount to micelles and the type of reducing agent on the size of nanoparticles were investigated through transmission electron microscopy. It was found that increasing the ratio of precursor salt to copolymer and using different type of reducing agent, even in solid phase reduction, did not affect the nanoparticle size. The average size of Pt nanoparticles was estimated to be 1.4 ± 0.1 nm. The reason for getting same sized nanoparticles was discussed in the light of nucleation, growth process, stabilization and diffusion of nanoparticles within micelles.

36 MATERIALS SCIENCE↗

Sonochemical preparation of copper sulfides with different phases in aqueous solutions

Highlights: ► Sonochemical preparation of copper sulfides in aqueous solutions is reported. ► CuS and Cu{sub 2}S nanoparticles with crystallite sizes between 7 and 18 nm were obtained. ► Crystallite size can be changed using different complexing agents. ► Thermal behavior was studied by TG and XRD measurements. - Abstract: There is a growing interest in the synthesis of nanostructured copper sulfides due to their ability to form compounds with various stoichiometries. We report a sonochemical route for the preparation of copper sulfides with different compositions in aqueous solutions, using different, general and convenient copper sources such as copper acetate, copper hydroxide or basic copper carbonate and thiourea or thioacetamide as sulfur precursors under ambient air. Phase analysis, purity and morphology of the products were studied by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results revealed that nanoparticles of covellite, CuS, with crystallite sizes between 7 and 18 nm can be obtained by using different precursors and complexing agents and that chalcocite, Cu{sub 2}S, can also be prepared sonochemically.

36 MATERIALS SCIENCE↗

Energetics of CO2– in Aqueous Solution

Gas-phase and aqueous solution properties of neutral and anionic clusters of CO2 with 3, 4, and 8 explicit H2O molecules are calculated at the coupled cluster (CCSD(T)) level plus a self-consistent reaction field. Anionic clusters with the radical electron density localized on the carbon of the CO2 molecule rather than localized on the H2O molecules are more favorable energetically by 10-20 kcal/mol in the gas phase (?Hgas(298 K)) and 20-30 kcal/mol in aqueous solution (?Gaq(298 K)). The most favorable structures are those with the largest number of strong hydrogen bonds between the CO2 - and the explicit H2O molecules. Adiabatic electron affinities were calculated in the gas phase and in aqueous solution for the microsolvated anion. The adiabatic electron affinity of aqueous CO2 - is predicted to be 2.35 ± 0.08 eV and is converged with as few as 3 explicit H2O molecules plus a self-consistent reaction field. The EA of aqueous CO2 is significantly greater than the aqueous solvation free energy of the electron. The vertical attachment energies to CO2 and the vertical detachment energies from CO2 - were calculated. The solvated CO2 - anion is substantially bent to 135°, which requires 1.52 eV. The large energy required for bending in combination with the vertical detachment and attachment energies shows that substantial local solvent reorganization occurs on detachment or attachment of an electron to solvated CO2. The formation of aqueous C2O4 2- from CO2 - was also explored, and dimerization is predicted to occur.

McNeill, Ashley↗

Structural phase transitions in the Ag{sub 2}Nb{sub 4}O{sub 11}-Na{sub 2}Nb{sub 4}O{sub 11} solid solution

The phase transitions between various structural modifications of the natrotantite-structured system xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} have been investigated and a phase diagram constructed as a function of temperature and composition. This shows three separate phase transition types: (1) paraelectric-ferroelectric, (2) rhombohedral-monoclinic and (3) a phase transition within the ferroelectric rhombohedral zone between space groups R3c and R3. The parent structure for the entire series has space group R3{sup Macron }c. Compositions with x>0.75 are rhombohedral at all temperatures whereas compositions with x<0.75 are all monoclinic at room temperature and below. At x=0.75, rhombohedral and monoclinic phases coexist with the phase boundary below room temperature being virtually temperature-independent. The ferroelectric phase boundary extends into the monoclinic phase field. No evidence was found for the R3-R3c phase boundary extending into the monoclinic phase field and it is concluded that a triple point is formed. - Graphical abstract: Phase diagram for xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} solid solution showing changes in crystal symmetry as a function of temperature and composition. The crystal structure is depicted. Highlights: Black-Right-Pointing-Triangle Ferroelectric, rhombohedral Ag{sub 2}Nb{sub 4}O{sub 11} in solid solution with monoclinic Na{sub 2}Nb{sub 4}O{sub 11}. Black-Right-Pointing-Triangle Three phase boundaries were studied as a function of composition and temperature. Black-Right-Pointing-Triangle Both rhombohedral and monoclinic variants exhibit ferroelectricity. The parent phase of the series has space group R3{sup Macron }c.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization of intermetallic phases in a solution-treated Mg–5.0Sm–0.6Zn–0.5Zr (wt%) alloy

Highlights: • Intermetallic phases in a solution-treated Mg–Sm−Zn−Zr alloy were studied using TEM. • Four types of the Zn-/Zr-containing particles were revealed. • New orientation relationships between Zn{sub 2}Zr{sub 3} and Mg matrix were found and discussed. • Intermetallic particles formed during solution can influence alloy's precipitation. - Abstract: Although Zn–Zr intermetallic phases have been frequently reported in solution-treated Mg–RE–Zn–Zr systems (RE presents rare earth), the types, crystal structures and influence on precipitation remain to be systematically investigated. In this work, the intermetallic phases formed during solution treatment in a Mg–Sm–Zn–Zr alloy were studied using transmission electron microscopy. Four types, namely the plate phase, the spindle-like phase, the nano-scale granuliform phase and the rod-like phase were revealed. Except the first one, the other three ones are Zn–Zr phase. In addition, the granuliform phase presents quadrate-shaped or lath-shaped and was identified as Zn{sub 2}Zr{sub 3}. However, these two Zn{sub 2}Zr{sub 3} phases with different shapes follow quite different orientation relationships with Mg matrix. Furthermore, three kinds of rod-like phases were observed: one across the grain boundary but only coherent with one grain, one covered by jagged Mg{sub 3}Sm precipitates and one with no surficial phase. The former twos are Zn{sub 2}Zr{sub 3} while the later one is Zn{sub 2}Zr. Finally, this work indicates that only the plate MgZn{sub 2} phase and the rod-like Zn{sub 2}Zr{sub 3} phase in the grain interior will act as heterogeneous nucleation sites for the Mg{sub 3}Sm precipitates, thus influencing the precipitation.

36 MATERIALS SCIENCE↗

Theoretical study on phase coexistence in ferroelectric solid solutions near the tricritical point

Phase coexistence in ferroelectric solid solutions near the tricritical point has been theoretically analyzed by using the Landau-Devonshire theory. Results revealed that different phases having similar potential wells could coexist in a narrow composition range near the tricritical point in the classical Pb(Zr{sub 1−x}Ti{sub x})O{sub 3} system. The potential barrier between potential wells increases with the decrease of temperature. Coexisting phases or different domains of the same phase can produce adaptive strains to maintain atomic coherency at the interfaces or domain walls. Such compatibility strains have influence on the energy potential as well as the stability of relative phases, leading to the appearance of energetically unfavorable monoclinic phases. Those competing and coexisting phases also construct an easy phase transition path with small energy barrier in between, so that very small stimuli can produce large response in compositions near the morphotropic phase boundary, especially near the tricritical point.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identifying monomer phases and cluster phases in lysozyme solutions by studying the temperature dependence of the short-time dynamics

Recently experiments that combine both small angle neutron scattering (SANS) and Neutron Spin Echo (NSE) have demonstrated that dynamic clusters can form in concentrated lysozyme solutions when there is a right combination of a short-ranged attraction and a long-ranged electrostatic repulsion. In this paper, we study the temperature effect on the dynamic cluster formation and try to pinpoint the transition concentration from a monomer phase to a cluster phase. Interestingly at even a relatively high concentration (10 % mass fraction), despite the significant change of the SANS patterns that are associated with the change of the short-ranged attraction among proteins, the normalized short-time self-diffusion coefficient is not affected. This is interpreted due to the fact that there is no cluster formation at this condition. However, at larger concentrations such as 17.5 % and 22.5 % mass fraction, we show that the average hydrodynamic radius increase significantly and causes a large decrease of the normalized self-diffusion coefficient when the temperature is changed from 25 oC to 5 oC indicating the formation of dynamic clusters in solution.

59 BASIC BIOLOGICAL SCIENCES↗

Solutes at the liquid:liquid phase boundary—Solubility and solvent conformational response alter interfacial microsolvation

A detailed understanding of solvent structure and dynamics at liquid:liquid interfaces is a necessary precursor for control and manipulation of these phase boundaries. Experimentally, amphiphilic solutes are often used to alter transport properties across water:organic interfaces; yet, a fundamental model for the mechanism of this action has not been determined. Our study compares the solvation profiles of ampiphilic solutes that traverse the phase boundary in binary water:n-hexane, and the individual microsolvation processes for interfacial water and hexane molecules therein. Microsolvation is defined as the rare event where one solvent molecule temporarily penetrates the co-solvent phases and is fully solvated therein. The solutes tri-butyl phosphate (TBP), hydrogen di-butyl phosphate, and di-hydrogen mono-butyl phosphate have been examined as they exhibit a systematic increase in aqueous solubility and selectively partition to the interfacial region at the infinite dilution limit. The relationship between adopted configurations of the solute, orientation of the solvent, and the ability of the solute to enhance microsolvation, specifically the ability of n-hexane to penetrate the aqueous phase, is observed within a 20 Å radius of TBP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗