Search NASA⌕ Search

SEARCH · Search NASA

Results for “spatial analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Pre-Stall Behavior of a Transonic Axial Compressor Stage via Time-Accurate Numerical Simulation

CFD calculations using high-performance parallel computing were conducted to simulate the pre-stall flow of a transonic compressor stage, NASA compressor Stage 35. The simulations were run with a full-annulus grid that models the 3D, viscous, unsteady blade row interaction without the need for an artificial inlet distortion to induce stall. The simulation demonstrates the development of the rotating stall from the growth of instabilities. Pressure-rise performance and pressure traces are compared with published experimental data before the study of flow evolution prior to the rotating stall. Spatial FFT analysis of the flow indicates a rotating long-length disturbance of one rotor circumference, which is followed by a spike-type breakdown. The analysis also links the long-length wave disturbance with the initiation of the spike inception. The spike instabilities occur when the trajectory of the tip clearance flow becomes perpendicular to the axial direction. When approaching stall, the passage shock changes from a single oblique shock to a dual-shock, which distorts the perpendicular trajectory of the tip clearance vortex but shows no evidence of flow separation that may contribute to stall.

Chen, Jen-Ping↗

Estimating Climatological Bias Errors for the Global Precipitation Climatology Project (GPCP)

A procedure is described to estimate bias errors for mean precipitation by using multiple estimates from different algorithms, satellite sources, and merged products. The Global Precipitation Climatology Project (GPCP) monthly product is used as a base precipitation estimate, with other input products included when they are within +/- 50% of the GPCP estimates on a zonal-mean basis (ocean and land separately). The standard deviation s of the included products is then taken to be the estimated systematic, or bias, error. The results allow one to examine monthly climatologies and the annual climatology, producing maps of estimated bias errors, zonal-mean errors, and estimated errors over large areas such as ocean and land for both the tropics and the globe. For ocean areas, where there is the largest question as to absolute magnitude of precipitation, the analysis shows spatial variations in the estimated bias errors, indicating areas where one should have more or less confidence in the mean precipitation estimates. In the tropics, relative bias error estimates (s/m, where m is the mean precipitation) over the eastern Pacific Ocean are as large as 20%, as compared with 10%-15% in the western Pacific part of the ITCZ. An examination of latitudinal differences over ocean clearly shows an increase in estimated bias error at higher latitudes, reaching up to 50%. Over land, the error estimates also locate regions of potential problems in the tropics and larger cold-season errors at high latitudes that are due to snow. An empirical technique to area average the gridded errors (s) is described that allows one to make error estimates for arbitrary areas and for the tropics and the globe (land and ocean separately, and combined). Over the tropics this calculation leads to a relative error estimate for tropical land and ocean combined of 7%, which is considered to be an upper bound because of the lack of sign-of-the-error canceling when integrating over different areas with a different number of input products. For the globe the calculated relative error estimate from this study is about 9%, which is also probably a slight overestimate. These tropical and global estimated bias errors provide one estimate of the current state of knowledge of the planet's mean precipitation.

Global Precipitation Climatology Project (GPCP)↗

REQUIEM-2D Methodology: Spatially Resolved Stellar Populations of Massive Lensed Quiescent Galaxies from Hubble Space Telescope 2D Grism Spectroscopy

We present a novel Bayesian methodology to jointly model photometry and deep Hubble Space Telescope 2D grism spectroscopy of high-redshift galaxies. Our requiem2d code measures both unresolved and resolved stellar populations, ages, and star formation histories (SFHs) for the ongoing REsolving QUIEscent Magnified (REQUIEM) Galaxies Survey, which targets strong gravitationally lensed quiescent galaxies at z ∼ 2. We test the accuracy of requiem2d using a simulated sample of massive galaxies at z ∼ 2 from the Illustris cosmological simulation and find that we recover the general trends in SFH and median stellar ages. We further present a pilot study for the REQUIEM Galaxies Survey: MRG-S0851, a quintuply imaged, massive (log M ⁎ / M ʘ = 11.02 ± 0.04) red galaxy at z = 1.883 ± 0.001. With an estimated gravitational magnification of µ = 5.7 - 0.2 + 0.4, we sample the stellar populations on 0.6 kpc physical size bins. The global mass-weighted median age is constrained to be 1.8 - 0.2 + 0.3 Gyr, and our spatially resolved analysis reveals that MRG-S0851 has a flat age gradient in the inner 3 kpc core after taking into account the subtle effects of dust and metallicity on age measurements, favoring an early formation scenario. The analysis for the full REQUIEM-2D sample will be presented in a forthcoming paper with a beta release of the requiem2d code.

Strong gravitational lensing↗

Aerothermodynamic Measurements in Hypersonic Non-Equilibrium Flows

High enthalpy arc-jets are unique facilities particularly suited for simulating complex flows in the aerospace field, such as the aerothermodynamics of a re-entry vehicle. Arc-jets are often used to evaluate important design factors such as heat shield materials and vehicle design. Characterization of these facilities is important, as studies often match specific in-flight environments during experiments. Due to the complex environment produced by an arc-jet, with effects such as thermodynamic and chemical non-equilibrium occurring in the flow, characterization experiments are significantly more difficult than in traditional blow-down wind tunnels. The current work aims to characterize an arc-jet facility in terms of flow temperature, velocity and unsteadiness, in a spatially-resolved analysis. To achieve this goal, a non-intrusive imaging technique called “planar laser-induced fluorescence” was performed in the NASA Langley Hypersonic Materials Environ-mental Test System arc-jet facility. The experimental data was analyzed to produce the quantitative measurements in multiple regions of the flow around a blunt body sample. A quasi-1D low fidelity solver was created to numerically simulate the flow to investigate non-equilibrium effects occur-ring outside the imaging region in the arc-jet nozzle. Unsteadiness in the test section was minimized by analyzing a subset of data assessing the gas injection location. Radial velocity, rotational temperature and translational temperature measurements are provided that can be used to validate future high-fidelity computational studies. The temperature measurements revealed rotational non-equilibrium potentially occurring in the flow. This work provides a methodology for characterizing arc-jet facilities, identifying and correcting sources of systematic error, and estimating the uncertainty associated with the quantitative measurements.

laser induced fluorescence↗

4.46 Ga Zircons Anchor Chronology of Lunar Magma Ocean

The crystallisation ages of lunar samples provide critical constraints on the minimum formation age of the Moon and its early evolution. Zircon crystals from Apollo 17 lunar impact melt breccia 72255 preserve ancient domains with a concordant average uranium-lead radiometric date of 4460 ± 31 Ma (Zhang et al., 2021), the oldest lunar zircon yet reported. To assess the possible mobility of radiogenic lead in zircon, which may lead to redistribution and clustering of Pb atoms that may cause a U-Pb age bias (Valley et al., 2014), we investigated a zircon grain from Zhang et al. (2021) by atom probe tomography (APT). The atomic spatial resolution analysis of individual mineral grains demonstrates the absence of nanoscale clustering of lead, which supports a 4.46 Ga ancient formation age for lunar zircon in sample 72255. This age pushes back the age of the first preserved lunar crust by ∼40 Myr and provides a minimum formation age for the Moon within 110 Myr after the formation of the solar system.

atom probe tomography↗

The dynamics of unsteady detonation with diffusion

Here we consider an unsteady detonation with diffusion included. This introduces an interaction between the reaction length scales and diffusion length scales. Detailed kinetics introduce multiple length scales as shown though the spatial eigenvalue analysis of hydrogen-oxygen system; the smallest length scale is {approx} 10{sup 7} m and the largest {approx} 10{sup -2} m; away from equilibrium, the breadth can be larger. In this paper, we consider a simpler set of model equations, similar to the inviscid reactive compressible fluid equations, but include diffusion (in the form of thermal/energy, momentum, and mass diffusion). We will seek to reveal how the complex dynamics already discovered in one-step systems in the inviscid limit changes with the addition of diffusion.

66↗

Discrete Event Modeling and Massively Parallel Execution of Epidemic Outbreak Phenomena

In complex phenomena such as epidemiological outbreaks, the intensity of inherent feedback effects and the significant role of transients in the dynamics make simulation the only effective method for proactive, reactive or post-facto analysis. The spatial scale, runtime speed, and behavioral detail needed in detailed simulations of epidemic outbreaks make it necessary to use large-scale parallel processing. Here, an optimistic parallel execution of a new discrete event formulation of a reaction-diffusion simulation model of epidemic propagation is presented to facilitate in dramatically increasing the fidelity and speed by which epidemiological simulations can be performed. Rollback support needed during optimistic parallel execution is achieved by combining reverse computation with a small amount of incremental state saving. Parallel speedup of over 5,500 and other runtime performance metrics of the system are observed with weak-scaling execution on a small (8,192-core) Blue Gene / P system, while scalability with a weak-scaling speedup of over 10,000 is demonstrated on 65,536 cores of a large Cray XT5 system. Scenarios representing large population sizes exceeding several hundreds of millions of individuals in the largest cases are successfully exercised to verify model scalability.

99 GENERAL AND MISCELLANEOUS↗

CONSTRUCTING A NETWORK FUNDAMENTAL DIAGRAM: A SYNTHETIC ORIGIN-DESTINATION APPROACH

The Network Fundamental Diagram (NFD) is increasingly used in traffic monitoring and control. One obstacle to a wider application of NFDs in network control is the difficulty of obtaining data from all vehicles traveling in the network to construct an accurate NFD. One solution is to estimate the NFD using data from only a fraction of vehicles (i.e., probe vehicles), where the probe vehicle market penetration rate (MPR) needs to be estimated. A previous study conducted by the authors demonstrated that a distance or time weighted harmonic mean was needed to estimate the flow- and density-based MPRs, respectively using a pairing k-mean clustering approach. This paper proposes another approach that utilizes probe vehicle and observed link volume data to estimate the MPR. A heuristic model is proposed to identify the optimum locations from which to collect link traffic volume data for use in the MPR estimation. The estimated MPR can then be used to construct the NFD. Results show that these models can accurately estimate the NFD with limited probe vehicle and link traffic volume data. Accordingly, the models can be used in the field to estimate the NFD using readily available loop detector and probe vehicle data. The ideal locations for traffic volume data collection can also be proactively chosen to generate optimum estimation results. Since the models proposed here show no significant gains with an increased magnitude of collected data after a certain threshold, they will be helpful, particularly when large-scale data collection is not affordable or realistic.

Spatial Analysis, Market Penetration Rate, NFD, Sy↗

Adaptive Classification of Landscape Process and Function: An Integration of Geoinformatics and Self-Organizing Maps

The advanced geospatial information extraction and analysis capabilities of a Geographic Information System (GISs) and Artificial Neural Networks (ANNs), particularly Self-Organizing Maps (SOMs), provide a topology-preserving means for reducing and understanding complex data relationships in the landscape. The Adaptive Landscape Classification Procedure (ALCP) is presented as an adaptive and evolutionary capability where varying types of data can be assimilated to address different management needs such as hydrologic response, erosion potential, habitat structure, instrumentation placement, and various forecast or what-if scenarios. This paper defines how the evaluation and analysis of spatial and/or temporal patterns in the landscape can provide insight into complex ecological, hydrological, climatic, and other natural and anthropogenic-influenced processes. Establishing relationships among high-dimensional datasets through neurocomputing based pattern recognition methods can help 1) resolve large volumes of data into a structured and meaningful form; 2) provide an approach for inferring landscape processes in areas that have limited data available but exhibit similar landscape characteristics; and 3) discover the value of individual variables or groups of variables that contribute to specific processes in the landscape. Classification of hydrologic patterns in the landscape is demonstrated.

58 GEOSCIENCES↗

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

The spatial characteristics of the data were evaluated. A program was developed to reduce the spatial distortions resulting from variable viewing distance, and geometrically adjusted data sets were generated. The potential need for some level of radiometric adjustment was evidenced by an along track band of high reflectance across different cover types in the Varian imagery. A multiple regression analysis was employed to explore the viewing angle effect on measured reflectance. Areas in the data set which appeared to have no across track stratification of cover type were identified. A program was developed which computed the average reflectance by column for each channel, over all of the scan lines in the designated areas. A regression analysis was then run using the first, second, and third degree polynomials, for each channel. An atmospheric effect as a component of the viewing angle source of variance is discussed. Cover type maps were completed and training and test field selection was initiated.

Hoffer, R. M.↗

Angiographic analysis of heart geometry.

Basic steps in the acquisition and reconstruction of cardiac dimensions obtained from angiocardiograms for spatial reconstruction and analysis are described, and example applications include a reconstruction of the human left ventricle and a study of the motion of the free wall of the right ventricle in a dog. Computer analysis of the spatial motion of implanted tantalum markers is discussed along with corrections for distortion and magnification incurred in the process. Graphics display of three-dimensional ventricle models is examined, and future improvements in angiocardiographic studies are considered.

Sandler, H.↗

An analysis of temperature effect in a finite journal bearing with spatial tilt and viscous dissipation

The analysis presented herein deals with the evaluation of the pressure, velocity, and temperature profiles in a finite-length plane journal bearing. The geometry of the case under study consists of a spatially tilted shaft. The two-dimensional Reynolds equation accounts for the variation of the clearance gap h with x and z and is used to model the pressure field. The latter is solved for a variety of shaft tilt angles and then used to calculate the two-dimensional flow field. Finally, the flow field is used in the energy equation to solve for the film temperature profile, when the effect of viscous dissipation is taken into account.

Braun, M. J.↗

BATSE software for the analysis of the gamma ray burst spatial distribution

The Burst and Transient Source Experiment (BATSE) on the Gamma Ray Observatory (GRO) is designed to study astronomical gamma ray sources and to provide better positional, spectral, and time resolution about these objects than has previously been possible from one experiment. The procedure to be used in the analysis of the gamma ray burst spatial distribution is presented. Data is input from BATSE via the Gamma Ray Burst Catalog (listing individual burst positions, flux values, and associated errors) and the Sky Sensitivity Map (which summarizes observational selection effects in table format). A FORTRAN program generates Monte Carlo burst catalogs, which are models to be compared to the actual distribution. The Monte Carlo models are then filtered through the Sky Sensitivity Map so that they suffer from the same selection effects as the actual catalog data. Additionally, each burst position is converted into a probability distribution to mimic BATSE positional sensitivity. The Burst Catalog, Monte Carlo burst catalog, and Sky Sensitivity Map are then passed onto an IDL program that compares the catalogs for statistical significance. The Sky Sensitivity Map is used to estimate how often each sky area is observed above the minimum flux level in question. Each burst found in this sky area is then weighted according to the frequency with which this sky area is observed. The catalogs are then compared via tests of homogeneity (based on their radial distributions) and isotropy (based upon their angular distributions). The results of the statistical comparisons along with graphs and charts of the summaries, are output from the IDL program for study.

Hakkila, Jon↗

Spatiotemporal and Statistical Mapping of Transition Metal Equilibria in Alkaline Media

Transition metal dissolution and redeposition (D/R) kinetics in alkaline media play a critical role in various chemical and electrochemical processes. Competitive reaction kinetics between different transition metals can modulate individual metal behavior in these processes. To date, these phenomena have remained largely unmeasured, and even when captured, they are difficult to statistically characterize due to their dynamic nature, simultaneous occurrence, and spatially heterogeneous nature. Here, in this study, we develop a statistical analysis framework based on in situ and operando X-ray fluorescence microscopy (XFM) to investigate the relative D/R kinetics of multiple transition metals in alkaline media. By employing statistical analysis, we quantify the spatial distribution of D/R species and assess the rate at which the system reaches equilibrium under varying reaction conditions. We show that pH does not simply change the rate of dissolution and redeposition, but reorganizes the cross-element kinetic correlations among Ni, Fe, and Mn and accelerates the spatial equilibration of D/R events, as quantified through correlation analysis, reaction-rate estimation, probability function distributions, and texture-based monitoring statistics. Additionally, we demonstrate how modifying the solvent environment can influence D/R kinetics, providing a pathway for tuning materials synthesis and process optimization. Our study offers valuable insights into the complex interplay between different transition metals and provides a reliable statistical framework for spatial analysis of diverse imaging data sets, enabling deeper extraction of latent information across multiple modalities.

36 MATERIALS SCIENCE↗

Exposure time for space-borne IR spatial interferometer

A mathematical analysis is performed to determine the relationship between the signal-to-noise ratio and the exposure time for an orbiting IR heterodyne spatial interferometer. The analysis includes consideration of the transformation of the interferogram to obtain the source angular intensity distribution so that the signal-to-noise ratio pertains to the angular distribution rather than to the interferogram. The analysis is applied to a number of known IR sources. The results presented show that an interferometer with a 30-m baseline using half-meter telescopes should be able to image a source such as IRC + 30219 with a signal-to-noise ratio of 10 in a total exposure time of less than an hour.

Wolfe, R. H., Jr.↗

cluster trials v. 1.0

This software contains a set of python modules – input, search, cluster, analysis; these modules read input files containing spatial coordinates and associated attributes which can be used to perform nearest neighbor search (spatial indexing via kdtree), cluster analysis/identification, and calculation of spatial statistics for analysis.

Mitchell, John↗