Search NASA⌕ Search

SEARCH · Search NASA

Results for “stochastic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Enhancing capillary trapping effectiveness through proper time scheduling of injection of supercritical CO 2 in heterogeneous formations

The impact of geologic heterogeneity on capillary trapping of supercritical CO 2 (scCO 2 ) has been recognized and appraised through laboratory experimentation and modeling. However, how different injection strategies can be optimized to improve capillary trapping has not received adequate attention. Here, we present a study based on stochastic analysis to show the impact of injection scheduling on capillary trapping of scCO 2 in heterogeneous geological formations. Improvement of trapping efficiency consists of maximizing the trapped volume within a predefined secure zone of the storage formation with the goal of avoiding plume intersection with potential leakage pathways. Using knowledge acquired from physical experiments in intermediate-scale tanks with controlled heterogeneity, we conduct numerical simulations following a stochastic approach to extend the observed outcomes to a series of equally probable permeability scenarios. Our simulations involve the same combination of surrogate fluids that are used in the experiments to mimic viscosity and density contrasts between scCO 2 and brine. To account for uncertainty of formation heterogeneity, several permeability fields with three different variances and two horizontal correlation lengths are generated. The same volume of scCO 2 is emplaced using four different modes of injection scheduling. Results suggest that injection strategies aimed at enhancing capillary trapping of scCO 2 and increasing the probability of constraining the plume within a secure zone are strictly related to the specific heterogeneity of the reservoir. Finally, this preliminary theoretical finding suggests the potential for maximizing secure capillary trapping through the proper selection of injection schedule to fit the formation heterogeneity.

58 GEOSCIENCES↗

Parameter optimization for transitions between memory states in small arrays of Josephson junctions

Coupled arrays of Josephson junctions possess multiple stable zero voltage states. Such states can store information and consequently can be utilized for cryogenic memory applications. Basic memory operations can be implemented by sending a pulse to one of the junctions and studying transitions between the states. In order to be suitable for memory operations, such transitions between the states have to be fast and energy efficient. Here in this article we employed simulated annealing, a stochastic optimization algorithm, to study parameter optimization of array parameters which minimizes times and energies of transitions between specifically chosen states that can be utilized for memory operations (Read, Write, and Reset). Simulation results show that such transitions occur with access times on the order of 10–100 ps and access energies on the order of 10 -19 –5×10 -18 J. Numerical simulations are validated with approximate analytical results.

97 MATHEMATICS AND COMPUTING↗

The role of edge resonant magnetic perturbations in edge-localized-mode suppression and density pump-out in low-collisionality DIII-D plasmas

Two-fluid nonlinear MHD simulations using the TM1 code demonstrate that the formation of magnetic islands at the top and bottom of the H-mode pedestal, together with the strong screening of resonant fields in the gradient region of the pedestal, can account for ELM suppression and density pump-out by n = 2 resonant magnetic perturbations (RMPs) in low-collisionality DIII-D ITER similar shape (ISS) plasmas. Using experimentally relevant transport coefficients, neoclassical resistivity, electron collisionality, and RMP amplitudes, nonlinear MHD simulations reproduce the observed level of density reduction (density pump-out) in DIII-D due to the formation of narrow magnetic islands in the resistive foot of pedestal. For large amplitude RMPs ( B r / B t > 1 × 10 -4 ) simulations predict resonant field penetration and resulting in pressure reduction at the top of the pedestal, consistent with experimental observations at the onset of ELM suppression. The predicted reduction in the height and width of the pedestal by magnetic island enhanced collisional transport provides a quantitative mechanism for the stabilization of the peeling-ballooning mode (PBM). Importantly, these simulations predict strong screening of resonant fields in the steep gradient region of the pedestal due to strong E × B rotation and diamagnetic flows. Yet, if the plasma resistivity is made artificially larger (~ 10X) than neoclassical, the simulations predict magnetic stochasticity throughout the plasma edge and the collapse of the pedestal due to the reduction in the penetration threshold with increasing resistivity. A scaling relation for resonant field penetration at the pedestal top, using several hundred nonlinear simulations, reproduces the density and E × B rotation dependence of the ELM suppression threshold observed in DIII-D. Simulations using ITER model equilibria indicate that the penetration threshold at the top of the ITER pedestal will be lower than in DIII-D due to the anticipated lower perpendicular flow velocities in ITER, resulting in the weaker screening of resonant fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dissipative particle dynamics simulation of dilute polymer solutions—Inertial effects and hydrodynamic interactions

We examine the accuracy of dissipative particle dynamics (DPD) simulations of polymers in dilute solutions with hydrodynamic interaction (HI), at the theta point, modeled by setting the DPD conservative interaction between beads to zero. We compare the first normal-mode relaxation time extracted from the DPD simulations with theoretical predictions from a normal-mode analysis for theta chains. We characterize the influence of bead inertia within the coil by a ratio L{sub m}/R{sub g}, where L{sub m} is the ballistic distance over which bead inertia is lost, and R{sub g} is the radius of gyration of the polymer coil, while the HI strength per bead h* is determined by the ratio of bead hydrodynamic radius (r{sub H}) to the equilibrium spring length. We show how to adjust h* through the spring length and monomer mass, and how to optimize the accuracy of DPD for fixed h* by increasing the friction coefficient (γ ≥ 9) and by incorporating a nonlinear distance dependence into the frictional interaction. Even with this optimization, DPD simulations exhibit deviations of over 20% from the theoretical normal-mode predictions for high HI strength with h* ≥ 0.20, for chains with as many as 100 beads, which is a larger deviation than is found for Stochastic rotation dynamics simulations for similar chains lengths and values of h*.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DYNAMIC AND CLASSICAL PRA: A BWR SBO CASE COMPARISON

As part of the Light-Water Sustainability Program (LWRS), the purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain the safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic (i.e., dynamic system simulators) and probabilistic (stochastic sampling strategies) approaches are combined in a dynamic PRA fashion in order to estimate safety margins. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power are lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and compare this with traditional risk analysis modeling for this type of accident scenario. In the RISMC approach the dataset obtained consists of set of simulation runs (performed by using codes such as RELAP5/3D) where timing and ordering of events is changed accordingly to the stochastic sampling strategy adopted. On the other side, classical PRA methods, which are based on event-tree (FT) and fault-tree (FT) structures, generate minimal cut sets and probability values associated to each ET branch. The comparison of the classical and RISMC approaches is performed not only in terms of overall core damage probability but also considering statistical differences in the actual sequence of events. The outcome of this comparison analysis shows similarities and dissimilarities between the approaches but also highlights the greater amount of information that can be generated by using the RISMC approach.

97 MATHEMATICS AND COMPUTING↗

Large scale Brownian dynamics of confined suspensions of rigid particles

We introduce methods for large-scale Brownian Dynamics (BD) simulation of many rigid particles of arbitrary shape suspended in a fluctuating fluid. Our method adds Brownian motion to the rigid multiblob method [F. Balboa Usabiaga et al., Commun. Appl. Math. Comput. Sci. 11(2), 217–296 (2016)] at a cost comparable to the cost of deterministic simulations. We demonstrate that we can efficiently generate deterministic and random displacements for many particles using preconditioned Krylov iterative methods, if kernel methods to efficiently compute the action of the Rotne-Prager-Yamakawa (RPY) mobility matrix and its “square” root are available for the given boundary conditions. These kernel operations can be computed with near linear scaling for periodic domains using the positively split Ewald method. Here we study particles partially confined by gravity above a no-slip bottom wall using a graphical processing unit implementation of the mobility matrix-vector product, combined with a preconditioned Lanczos iteration for generating Brownian displacements. We address a major challenge in large-scale BD simulations, capturing the stochastic drift term that arises because of the configuration-dependent mobility. Unlike the widely used Fixman midpoint scheme, our methods utilize random finite differences and do not require the solution of resistance problems or the computation of the action of the inverse square root of the RPY mobility matrix. We construct two temporal schemes which are viable for large-scale simulations, an Euler-Maruyama traction scheme and a trapezoidal slip scheme, which minimize the number of mobility problems to be solved per time step while capturing the required stochastic drift terms. We validate and compare these schemes numerically by modeling suspensions of boomerang-shaped particles sedimented near a bottom wall. Using the trapezoidal scheme, we investigate the steady-state active motion in dense suspensions of confined microrollers, whose height above the wall is set by a combination of thermal noise and active flows. We find the existence of two populations of active particles, slower ones closer to the bottom and faster ones above them, and demonstrate that our method provides quantitative accuracy even with relatively coarse resolutions of the particle geometry.

97 MATHEMATICS AND COMPUTING↗

Impacts of stochastic coalescence variability on warm rain initiation using Lagrangian microphysics in box and large-eddy simulations

Various coalescence methods for Lagrangian microphysics schemes are tested in box and large-eddy simulation (LES) models, including the stochastic all-or-nothing super-droplet method (SDM) and a version of SDM (dSDM) that applies a fractional approach similar to the average impact method. In LES, variabilities driven by microphysics and by flow realizations are separated using the “piggybacking” technique. Rain initiation averaged over many realizations of the box model is delayed and rain variability increases as the number of super-drops per collision volume ( N SD ) is decreased using SDM. In contrast, rain initiation time using SDM in LES is insensitive to N SD for 32 ≤ N SD ≤ 512. This is explained through the interaction between LES grid boxes, each acting as a separate collision volume. Variability across the ensemble of LES collision volumes using SDM results in rain quickly initiating in some of the LES grid cells at low N SD and leading to a similar overall timing of rain initiation from the cloud compared to simulations with high N SD . There is a ~20% decrease in the total rain mass and mean rain flux as N SD is increased from 32 to 256, with little additional change as N SD is increased from 256 to 512. The fractional coalescence approach in dSDM leads to reduced microphysical variability and a 15-18 min delay in rain initiation compared to SDM. Finally, an additional LES ensemble with microphysical variability feeding back to the dynamics shows that flow variability dominates the impact of microphysical variability on rain properties. Thus, flow variability must be constrained to isolate impacts of microphysical variability.

54 ENVIRONMENTAL SCIENCES↗

A unified view of hierarchy approach and formula of differentiation

The stochastic differential equation is a powerful tool for describing the dynamics of a dissipative system in which noise characterizes the influence of the environment. For the Ornstein-Uhlenbeck noise, both the formula of differentiation and the hierarchy approach provide efficient numerical simulations, with the stochastic differential equation transformed into a set of coupled, linear ordinary differential equations. We show that while these two deterministic schemes result in different sets of equations, they can be regarded as two representations of an underlying linear-dynamics. Moreover, by manipulating the involved Ornstein-Uhlenbeck noise, we propose a unified algorithm that may reduce to the hierarchy approach or the formula of differentiation in different limits. We further analyze the numerical performance of this algorithm and find that the hierarchy approach appears to be more efficient for our numerical model studies.

Yan, Yun-An (ORCID:000000031943459X)↗

A Discrete Probability Function Method for the Equation of Radiative Transfer

A discrete probability function (DPF) method for the equation of radiative transfer is derived. The DPF is defined as the integral of the probability density function (PDF) over a discrete interval. The derivation allows the evaluation of the PDF of intensities leaving desired radiation paths including turbulence-radiation interactions without the use of computer intensive stochastic methods. The DPF method has a distinct advantage over conventional PDF methods since the creation of a partial differential equation from the equation of transfer is avoided. Further, convergence of all moments of intensity is guaranteed at the basic level of simulation unlike the stochastic method where the number of realizations for convergence of higher order moments increases rapidly. The DPF method is described for a representative path with approximately integral-length scale-sized spatial discretization. The results show good agreement with measurements in a propylene/air flame except for the effects of intermittency resulting from highly correlated realizations. The method can be extended to the treatment of spatial correlations as described in the Appendix. However, information regarding spatial correlations in turbulent flames is needed prior to the execution of this extension.

Sivathanu, Y. R.↗

Reducing uncertainty in personnel dosimetry calculations in the VHTR plant using MAVRIC

This work analyzes the efficacy of the MAVRIC sequence of the Scale 6.1 code package with respect to the accuracy of results and the ability to utilize large-memory, parallel machines. MAVRIC implements the hybrid FW-CADIS methodology to solve neutron and photon transport for shielding applications. Using the discrete ordinates method to solve the Boltzmann transport equation, an importance map is generated which MAVRIC then uses to bias a stochastic Monte Carlo simulation. The MAVRIC sequence is applied to generate neutron and photon dose rate distributions of improved accuracy in a model of a proposed VHTR power plant. Problems like this one, with a size on the order of magnitude of a nuclear power plant, require a prohibitive amount of memory to store complete importance maps. The issue is addressed by refining the mesh in areas around the source through the detector regions, while leaving a coarse mesh elsewhere. Additionally through the use of parallel computing, the angular flux can be expanded in higher quadrature sets, which leads to a better importance map while requiring no extra memory requirements during the Monte Carlo portion of the sequence. The final Monte Carlo simulations can be run concurrently on several machines with results combined after the fact, emulating parallelism that is not yet available in MAVRIC sequence. Using a combination of strategies, the MAVRIC sequence is shown to be able to scale across available computational resources, allowing the user to more quickly obtain Monte Carlo results with lower relative uncertainties in large, deep-penetration shielding problems. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Stochastic Model Predictive Control With Gaussian Wind Direction Preview for Wake Steering

This article addresses the problem of wake steering control for wind farms that explicitly consider the tradeoff between farm-level power generation and yaw duty cycle under variable and uncertain wind conditions. A novel stochastic model predictive control (MPC) algorithm is presented, which utilizes a stochastic model of the freestream wind field components in a receding horizon framework to compute optimal yaw set points that maximize the expected value of the farm power while constraining the yaw actuation. Different configurations of the algorithm are evaluated using a steady-state wind farm simulator. The proposed stochastic MPC algorithm can plan control actions over a future prediction horizon based on probabilistic estimates of the incoming wind magnitude and direction.

17 WIND ENERGY↗

Subordinated Gaussian Processes for Solar Irradiance

Traditionally the power grid has been a one-way street with power flowing from large transmission-connected generators through the distribution network to consumers. This paradigm is changing with the introduction of distributed renewable energy resources (DERs), and with it, the way the grid is managed. There is currently a dearth of high fidelity solar irradiance datasets available to help grid researchers understand how expansion of DERs could affect future power system operations. Realistic simulations of by-the-second solar irradiances are needed to study how DER variability affects the grid. Irradiance data are highly non-stationary and non-Gaussian, and even modern time series models are challenged by their distributional properties. We develop a subordinated non-Gaussian stochastic model whose simulations realistically capture the distribution and dependence structure in measured irradiance. We illustrate our approach on a fine resolution dataset from Hawaii, where our approach outperforms standard nonlinear time series models.

MATHEMATICS AND COMPUTING,SOLAR ENERGY↗

A stochastic model and Monte Carlo algorithm for fluctuation-induced H{sub 2} formation on the surface of interstellar dust grains

A stochastic algorithm for simulation of fluctuation-induced kinetics of H{sub 2} formation on grain surfaces is suggested as a generalization of the technique developed in our recent studies [1] where this method was developed to describe the annihilation of spatially separate electrons and holes in a disordered semiconductor. The stochastic model is based on the spatially inhomogeneous, nonlinear integro-differential Smoluchowski equations with random source term. In this paper we derive the general system of Smoluchowski type equations for the formation of H{sub 2} from two hydrogen atoms on the surface of interstellar dust grains with physisorption and chemisorption sites. We focus in this study on the spatial distribution, and numerically investigate the segregation in the case of a source with a continuous generation in time and randomly distributed in space. The stochastic particle method presented is based on a probabilistic interpretation of the underlying process as a stochastic Markov process of interacting particle system in discrete but randomly progressed time instances. The segregation is analyzed through the correlation analysis of the vector random field of concentrations which appears to be isotropic in space and stationary in time.

79 ASTRONOMY AND ASTROPHYSICS↗

Scaling kinetic Monte-Carlo simulations of grain growth with combined convolutional and graph neural networks

Graph neural networks (GNN) have emerged as a promising machine learning method for microstructure simulations such as grain growth. However, accurate modeling of realistic grain boundary networks requires large simulation cells, which GNN has difficulty scaling up to. To alleviate the computational costs and memory footprint of GNN, we suggest a hybrid architecture combining a convolutional neural network (CNN) based bijective autoencoder to compress the spatial dimensions, and a GNN that evolves the microstructure in the latent space of reduced spatial sizes. Our results demonstrate that the new design significantly reduces computational costs with using fewer message passing layer (from 12 down to 3) compared with GNN alone. The reduction in computational cost becomes more pronounced as the spatial size increases, indicating strong computational scalability. For the largest mesh evaluated (160 3 ), our method reduces memory usage and runtime in inference by 117× and 115×, respectively, compared with GNN-only baseline. More importantly, it shows higher accuracy and stronger spatiotemporal capability than the GNN-only baseline, especially in long-term testing. Such combination of scalability and accuracy is essential for simulating realistic material microstructures over extended time scales. The improvements can be attributed to the bijective autoencoder’s ability to compress information losslessly from spatial domain into a high dimensional feature space, thereby producing more expressive latent features for the GNN to learn from, while also contributing its own spatiotemporal modeling capability. Training data are generated from stochastic grain growth simulations, providing realistic variability for learning robust microstructure evolution. Comprehensive system validation confirms that the model is accurate, robust, and scalable.

36 MATERIALS SCIENCE↗

Dynamic scaling of order parameter fluctuations in model B

Brookhaven National Laboratory has performed a dedicated set of experiments, called the Beam Energy Scan (BES), with the goal of location a possible critical point in the phase diagram of nuclear matter, This point is analogous to the endpoint of the liquid-gas phase transition in water, where the liquid phase corresponds to a phase of hadrons, and the gas phase to a plasma of quarks and gluons. In order to describe the data generated by these experiments we have studied numerical simulations of the stochastic diffusion equation with a conserved charge. Here, we focus on the dynamics in the vicinity of a critical point in the Ising universality class. The model we consider is expected to describe the critical dynamics near a possible QCD critical point if the coupling of the order parameter to the momentum density of the fluid can be neglected. The simulations are performed on a spatial lattice, and the time evolution is performed using a Metropolis algorithm. We determine the dynamical critical exponent z ≃ 3.972(2), which agrees with predictions of the epsilon expansion. We also study non-equilibrium sweeps of the reduced temperature and observe approximate Kibble-Zurek scaling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗