Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural equation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Parameter estimation of large flexible aerospace structures with application to the control of the Maypole Deployable Reflector

Systems such as the Maypole deployable reflector have a distributed parameter nature. The flexible column and hoop structure and the circular antenna of 30-100 meter diameter which it supports are described by partial, rather than ordinary, differential equations. Progress completed in reduced order modelling andd controller design and digital parameter estimation and control is summarized. Topics covered include depolyment and on-orbit operation; quasi-static (steady state) operation; dynamic distributed parameter system; autoregressive moving average identification; frequency domain procedures; direct or implicit active control; adaptive observers; parameter estimation using a linear reinforcement learning factor; feedback control; and reduced order modeling for nonlinear systems.

Balas, M. J.↗

Embedded shear layer computations for increased drag reduction

One of the most promising methods of minimizing drag is the reduction of skin friction by injection of low momentum fluid into the near-wall region of turbulent boundary layer flows. This method could be made more effective by limiting the spread rate of the resulting mixing region. In order to achieve a better understanding of how this goal might be achieved, numerical investigations of the relevant fluid dynamic processes governing these regions have been conducted. A compact finite-difference algorithm has been applied to the complete form of the governing conservation equations for a two-dimensional laminar mixing layer. The ability of this computational approach to model successfully the formation and interaction of the large scale vortical structures which dominate such flow fields is verified in the present study. Parameters which affect the spread rate of the mixing region are also identified. In addition, the relative importance of viscous and momentum transport effects in the vortex interactions is determined.

Gatski, T. B.↗

Viscoplastic constitutive relationships with dependence on thermomechanical history

Experimental evidence of thermomechanical history dependence in the cyclic hardening behavior of some common high-temperature structural alloys is presented with special emphasis on dynamic metallurgical changes. The inadequacy of formulating nonisothermal constitutive equations solely on the basis of isothermal testing is discussed. A representation of thermoviscoplasticity is proposed that qualitatively accounts for the observed hereditary behavior. This is achieved by formulating the scalar evolutionary equation in an established viscoplasticity theory to reflect thermomechanical path dependence. To assess the importance of accounting for thermomechanical history dependence in practical structural analyses, two qualitative models are specified: (1) formulated as if based entirely on isothermal information; (2) to reflect thermomechanical path dependence using the proposed thermoviscoplastic representation. Predictions of the two models are compared and the impact the calculated differences in deformation behavior may have on subsequent lifetime predictions is discussed.

Robinson, D. N.↗

Inverse problems in the modeling of vibrations of flexible beams

The formulation and solution of inverse problems for the estimation of parameters which describe damping and other dynamic properties in distributed models for the vibration of flexible structures is considered. Motivated by a slewing beam experiment, the identification of a nonlinear velocity dependent term which models air drag damping in the Euler-Bernoulli equation is investigated. Galerkin techniques are used to generate finite dimensional approximations. Convergence estimates and numerical results are given. The modeling of, and related inverse problems for the dynamics of a high pressure hose line feeding a gas thruster actuator at the tip of a cantilevered beam are then considered. Approximation and convergence are discussed and numerical results involving experimental data are presented.

Banks, H. T.↗

Computations of vortical supersonic flows over a blunt-nose-cylinder at high angles of attack

Three-dimensional, viscous, and separated flows over a blunt-nose-cylinder at 20, 32, and 44-deg attack angles were computed. The approaching freestream was at a Mach number of 1.6 and a unit Reynolds number of 2 x 10 to the 6th/ft with a total temperature of 585 R. The cylinder used for the computations had a length-to-diameter ratio of 6.67 with a base diameter of 3 in. The flowfield was dominated by large-scale and multiple vortices generated by crossflow separation. The effect of turbulence on the flow structure of one case was modeled algebraically with modifications to correct the length and velocity scales in the regions of separation. The mass averaged Navier-Stokes equations were solved by an approximately factored, upwind-biased, implicit, finite volume scheme. The initialization of the flows was enhanced by a mesh sequencing strategy applied to the diagonalized form of the discretized equations. The convergence to steady-state was accelerated by a multigrid algorithm and using the block inversions for the discretized equations. Calculations were compared with experimental results.

Baysal, O.↗

Numerical investigation of chemically reacting flows in ramjet dump combustors

The time-dependent Navier-Stokes equations, including second-order turbulence model, are numerically integrated by using four-stage Runge-Kutta scheme to predict the steady-state supersonic flow structures in ramjet dump combustors. The formulation is derived for reacting flows with finite-rate chemistry. In the present study, it is firstly attempted to assess the accuracy of existing high-order turbulence model in supersonic flows. The comparison shows reasonable agreement between calculated and measured data in terms of velocity distributions. It is indicated that a modified constant C-mu for calculating turbulent eddy viscosity is needed in the supersonic flow regime and the adaptive meshing is preferred to capture the recirculation zone. In the reacting flow calculation, the results from a test case of hydrogen and air combustion at premixed conditon show that the rearward facing step is able to increase flow residence time and stabilize the flame in supersonic flows.

Hsieh, Kwang-Chung↗

Knowledge representation to support reasoning based on multiple models

Model Based Reasoning is a powerful tool used to design and analyze systems, which are often composed of numerous interactive, interrelated subsystems. Models of the subsystems are written independently and may be used together while they are still under development. Thus the models are not static. They evolve as information becomes obsolete, as improved artifact descriptions are developed, and as system capabilities change. Researchers are using three methods to support knowledge/data base growth, to track the model evolution, and to handle knowledge from diverse domains. First, the representation methodology is based on having pools, or types, of knowledge from which each model is constructed. In addition information is explicit. This includes the interactions between components, the description of the artifact structure, and the constraints and limitations of the models. The third principle we have followed is the separation of the data and knowledge from the inferencing and equation solving mechanisms. This methodology is used in two distinct knowledge-based systems: one for the design of space systems and another for the synthesis of VLSI circuits. It has facilitated the growth and evolution of our models, made accountability of results explicit, and provided credibility for the user community. These capabilities have been implemented and are being used in actual design projects.

Gillam, April↗

Model atmospheres for SN 1987A and the distance to the Large Magellanic Cloud

A code which simultaneously solves the non-LTE equations of statistical equilibrium and the time-independent equation of radiation transport in an expanding atmosphere is applied to analyze the spectrum of SN 1987A. The behavior of a model atmosphere in which the density structure is a power-law function of radius has been studied and compared closely with SN 1987A data. This model atmosphere is used to derive corrections to the expanding photosphere method for determining distances to supernovae. The distance to the Large Magellanic Cloud derived from SN 1987A observations by this 'custom yardstick' is 49 + or - 6 kpc in excellent accord with results for RR Lyrae stars and for Cepheids. This empirical test of the expanding photosphere method provides the basis for hope that it may make a significant contribution to the extragalactic distance scale at cosmologically interesting distances.

Eastman, Ronald G.↗

Probabilistic Simulation of the Human Factor in Structural Reliability

The formal approach described herein computationally simulates the probable ranges of uncertainties for the human factor in probabilistic assessments of structural reliability. Human factors such as marital status, professional status, home life, job satisfaction, work load, and health are studied by using a multifactor interaction equation (MFIE) model to demonstrate the approach. Parametric studies in conjunction with judgment are used to select reasonable values for the participating factors (primitive variables). Subsequently performed probabilistic sensitivity studies assess the suitability of the MFIE as well as the validity of the whole approach. Results show that uncertainties range from 5 to 30 percent for the most optimistic case, assuming 100 percent for no error (perfect performance).

Chamis, Christos C.↗

Research and Development of Rapid Design Systems for Aerospace Structure

This report describes the results of research activities associated with the development of rapid design systems for aerospace structures in support of the Intelligent Synthesis Environment (ISE). The specific subsystems investigated were the interface between model assembly and analysis; and, the high performance NASA GPS equation solver software system in the Windows NT environment on low cost high-performance PCs.

Schaeffer, Harry G.↗

Obliquity Experiments with a Mars General Circulation Model

We have simulated the seasonal variation of the general circulation on Mars for obliquities of 0deg and 60deg. These obliquities represent the minimum and maximum values the planet has experienced during the past 10(exp 7) years (e.g., Laskar and Robutel, 1993, Nature, 361, 608-614). The model we use is the NASA/Ames Mars General Circulation Model (Pollack et al., 1993, J. Geophys. Res. 98, 3149-3181). We vary only the obliquity; all other model parameters are as in Pollack et al. At high obliquity, the model shows dramatic seasonal variations in the polar caps and in the structure and intensity of the circulation. At the solstices the winter cap extends to the equator. Thus, surface temperatures throughout the entire winter hemisphere are fixed at the CO2 frost point. During summer surface temperatures at the poles reach 269K in the north and 295K in the south. The most notable changes to the circulation at solstice compared to our standard runs are a general weakening of the winter westerlies, a Hadley cell of greater latitudinal extent, and the development of very strong, possibly unstable, low-level jets in midlatitudes of the summer hemisphere. Surface stresses associated with these jets are sufficient to raise dust continuously. Thus, dust storms should be frequent features of the high obliquity climate. This result is independent of any desorbed regolith CO2 which would raise mean surface pressures. At zero obliquity the structure of the circulation resembles that of present day equinox conditions modulated by the varying insolation associated with orbital eccentricity. Notable features include equatorial superrotation, asymmetric Hadley cells, and stronger poleward heat fluxes in the northern hemisphere. Since the poles do not receive solar energy at any time of year, permanent caps form which extend to about 70deg in each hemisphere. However, the north permanent cap is growing at a rate 40% faster than the south cap. This is due to the differences in topography, albedo, emissivity, and heat transport in each hemisphere. Thus the zero obliquity climate system appears to be evolving toward a state in which the north cap is the dominant cap.

Harberle, R. M.↗

Modeling of transient heat pipe operation

Mathematical models and associated solution procedures which can be used to design heat pipe cooled structures for use on hypersonic vehicles are being developed. The models should also have the capability to predict off-design performance for a variety of operating conditions. It is expected that the resulting models can be used to predict startup behavior of liquid metal heat pipes to be used in reentry vehicles, hypersonic aircraft, and space nuclear reactors. Work to date related to numerical solutions of governing differential equations for the outer shell and the combination capillary structure and working fluid is summarized. Finite element numerical equations using both implicit, explicit, and combination methods were examined.

Colwell, G. T.↗

Auroral plasma transport processes in the presence of kV potential structures

We have simulated plasma transport processes in the presence of a quasi-two-dimensional current filament, that generated kV potential structure in the auroral region. The simulation consists of a set of one-dimensional flux tube simulations with different imposed time-dependent, field-aligned currents. The model uses the 16 moment system of equations and simultaneously solves coupled continuity and momentum equations and equations describing the transport along the magnetic field lines of parallel and perpendicular thermal energy and heat flows for each species. The lower end of the simulation is at an altitude of 800 km, in the collisional topside ionosphere, while the upper end is at 10 R(sub E) in the magnetosphere. The plasma consists of hot electrons and protons of magnetospheric origin and low-energy electrons, protons, and oxygen ions of ionospheric origin. The dynamical interaction of the individual current filaments with ionospheric and magnetospheric plasma generates a potential structure in the horizontal direction and kilovolt field-aligned potential drops along the field lines. The side-by-side display exhibits the evolution of the implied potential structure in the horizontial direction. In the presence of this potential structure and parallel electric field ionospheric plasma density is depleted and velocity is reduced, while density enhancement and increased velocity is observed in magnetospheric plasma. The ionospheric and magnetospheric electron temperatures increase below 2 R(sub E) due to magnetic mirror force on converging geomagnetic field lines. The primary cross-field motion produced by the horizontal E field (E x B drift) is perpendicular to both of the significant spatial directions and is thus ignorable in this geometry. The effects of other cross-field drift processes are discussed. The simulation thus provides insight into the dynamical evolution of two-dimensional potential structures driven by an imposed finite width, field-aligned current profile.

Ganguli, Supriya B.↗

Nonlinear Aeroelastic Analysis Using a Time-Accurate Navier-Stokes Equations Solver

A method to simulate limit cycle oscillation (LCO) due to control surface freeplay using a modified CFL3D, a time-accurate Navier-Stokes computational fluid dynamics (CFD) analysis code with structural modeling capability, is presented. This approach can be used to analyze aeroelastic response of aircraft with structural behavior characterized by nonlinearity in the force verses displacement curve. A limited validation of the method, using very low Mach number experimental data for a three-degrees-of-freedom (pitch/plunge/flap deflection) airfoil model with flap freeplay, is also presented.

Kuruvila, Geojoe↗

The modeling of piezoceramic patch interactions with shells, plates and beams

General models describing the interactions between a pair of piezoceramic patches and elastic substructures consisting of a cylindrical shell, plate and beam are presented. In each case, the manner in which the patch loads enter both the strong and weak forms of the time-dependent structural equations of motion is described. Through force and moment balancing, these loads are then determined in terms of material properties of the patch and substructure (thickness, elastic properties, Poisson ratios), the geometry of the patch placement, and the voltages into the patches. In the case of the shell, the coupling between banding and inplane deformations, which is due to the curvature, is retained. These models are sufficiently general to allow for potentially different patch voltages which implies that they can be suitably employed when using piezoceramic patches for controlling system dynamics when both extensional and bending vibrations are present.

Banks, H. T.↗

Low dimensional models of the wall region of a turbulent boundary layer, and the possibility of control

A method of identification of coherent structures in a random turbulent flow is outlined with emphasis on the structure best correlated with a random energy-integrable field and application of the proper orthogonal decomposition to the shear flow of the wall region. The wall region of a pipe flow with almost pure glycerine is investigated experimentally, dynamic equations are obtained, and an energy-transfer model is employed. Numerical solutions are obtained, implications for the flow in the wall region are discussed with focus placed on the sets of solutions exhibiting intermittency. The most significant finding of the study is considered to be the suggestion of the etiology of the bursting phenomenon; presuming that abrupt transitions from one fixed point to the other can be identified with a burst, these bursts appear to be produced autonomously by the wall region, but be triggered by pressure signals from the outer layer.

Lumley, John L.↗

A Space Station/Payload Pointing System simulation using TREETOPS

A rigid body model of NASA's Space Station (SS)/Payload Pointing System (PPS) was built and simulated using the multibody, large angle simulation package TREETOPS, whose name refers to the tree-topology class of structures that may be simulated. SS/PPS data from a previous feasibility study utilizing the MultiOptimal Differential Equation language was used as a test case to evaluate the built-in dynamical formulation capabilities of TREETOPS. The simulation results showed close agreement with NASA-Goddard data, demonstrating the validity of the nonlinear, large angle, multi-degree of freedom TREETOPS model.

Ram, Mohan↗

A Mixed Multi-Field Finite Element Formulation for Thermopiezoelectric Composite Shells

Analytical formulations are presented which account for the coupled mechanical, electrical, and thermal response of piezoelectric composite shell structures. A new mixed multi-field laminate theory is developed which combines "single layer" assumptions for the displacements along with layerwise fields for the electric potential and temperature. This laminate theory is formulated using curvilinear coordinates and is based on the principles of linear thermopiezoelectricity. The mechanics have the inherent capability to explicitly model both the active and sensory responses of piezoelectric composite shells in thermal environment. Finite element equations are derived and implemented for an eight-noded shell element. Numerical studies are conducted to investigate both the sensory and active responses of piezoelectric composite shell structures subjected to thermal loads. Results for a cantilevered plate with an attached piezoelectric layer are com- pared with corresponding results from a commercial finite element code and a previously developed program. Additional studies are conducted on a cylindrical shell with an attached piezoelectric layer to demonstrate capabilities to achieve thermal shape control on curved piezoelectric structures.

Lee, Ho-Jun↗