Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Quantitative Review of Olivine Carbonation Kinetics: Reactivity Trends, Mechanistic Insights, and Research Frontiers

Magnesium-dominant olivine (Mg2SiO4) has received considerable attention for geologic and ex situ carbon mineralization due to its reaction potential with CO2 and its abundance in mafic and ultramafic rocks. To enable better predictions and optimization of its carbonation rate, here we compile the results of 15 separate studies into an internally consistent kinetic framework. Time-dependent transformation curves were determined, analyzed, and used to calculate temperature-dependent carbonation rate constants from 50-300 °C. The unified results clearly show that olivine carbonation is optimized at 185-200 °C, and indicate a change in the carbonation reaction mechanism above 90 °C. By comparison with related efforts focused solely on olivine dissolution rates, we demonstrate that the kinetics are controlled by growth of magnesium carbonates. Additional outcomes include the identification of important knowledge gaps and research frontiers for carbon mineralization, including those related to unraveling competitive serpentinization reactions, H2O-saturated supercritical CO2 (wet scCO2) reactivity, and the formation and impacts of secondary surface coatings. In addition to supporting the deployment of carbon storage technologies in a climate-responding world, the findings may help improve understanding of how carbonation and serpentinization processes influence critical geochemical cycles.

Miller, Quin RS↗

Effects of hydrogen atoms on surface conductivity of diamond film

To investigate the effects of surface chemisorbed hydrogen atoms and hydrogen atoms in the subsurface region of diamond on surface conductivity, models of hydrogen atoms chemisorbed on diamond with (100) orientation and various concentrations of hydrogen atoms in the subsurface layer of the diamond were built. By using the first-principles method based on density functional theory, the equilibrium geometries and densities of states of the models were studied. The results showed that the surface chemisorbed hydrogen alone could not induce high surface conductivity. In addition, isolated hydrogen atoms in the subsurface layer of the diamond prefer to exist at the bond centre site of the C-C bond. However, such a structure would induce deep localized states, which could not improve the surface conductivity. When the hydrogen concentration increases, the C-H-C-H structure and C-3H{sub bc}-C structure in the subsurface region are more stable than other configurations. The former is not beneficial to the increase of the surface conductivity. However, the latter would induce strong surface states near the Fermi level, which would give rise to high surface conductivity. Thus, a high concentration of subsurface hydrogen atoms in diamond would make significant contributions to surface conductivity.

36 MATERIALS SCIENCE↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 4a Raw Data

Calculated formation energy of (0001 ̅) c-plane GaN surfaces. The density-functional theory (DFT) calculations were performed with the generalized gradient approximation, using the plane-wave pseudopotential quantum-ESPRESSO package. Ultrasoft pseudopotentials were used to describe the interaction between valence electrons and ionic cores, where Ga 3d electrons were explicitly treated as valence electrons. The wave functions and electronic density were expanded in a plane-wave basis set truncated at a cutoff energy of 30 Ry and 240 Ry, respectively. The surface was modeled using a repeated slab geometry using a (2×2) unit cell with a thickness of seven GaN bilayers, where the Ga-terminated bottom side was passivated by pseudo-hydrogen with charge of 1.25e. In addition, the (1010) surface was modeled using 8 GaN atomic layers with a lateral dimension of 9.57 Å x 10.38 Å. A vacuum width of at least 15.0 Å was introduced between consecutive slabs, and a k-point mesh of 5x5x1 and 2x2x1 was used to sample the surface Brillouin zone for the polar and non-polar surfaces, respectively. Calculated formation energy of (0001 ̅) c-plane GaN surfaces with different oxygen configuration within the anion and cation-rich limits: ideal GaN surfaces of c-plane and m-plane; configurations with 100% replacement of nitrogen by oxygen on the surface c-plane and m-plane; 100% replacement of nitrogen by oxygen in the subsurface bilayer c-plane and m-plane; and configurations with 50% replacement of nitrogen of the surface and subsurface bilayers by oxygens c-plane and m-plane. In both cases, the ideal surface is chosen as the reference.

photocathode↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 4b Raw Data

Calculated formation energy of (1010 ̅) m-plane GaN surfaces. The density-functional theory (DFT) calculations were performed with the generalized gradient approximation, using the plane-wave pseudopotential quantum-ESPRESSO package. Ultrasoft pseudopotentials were used to describe the interaction between valence electrons and ionic cores, where Ga 3d electrons were explicitly treated as valence electrons. The wave functions and electronic density were expanded in a plane-wave basis set truncated at a cutoff energy of 30 Ry and 240 Ry, respectively. The surface was modeled using a repeated slab geometry using a (2×2) unit cell with a thickness of seven GaN bilayers, where the Ga-terminated bottom side was passivated by pseudo-hydrogen with charge of 1.25e. In addition, the (1010) surface was modeled using 8 GaN atomic layers with a lateral dimension of 9.57 Å x 10.38 Å. A vacuum width of at least 15.0 Å was introduced between consecutive slabs, and a k-point mesh of 5x5x1 and 2x2x1 was used to sample the surface Brillouin zone for the polar and non-polar surfaces, respectively. Calculated formation energy of (1010 ̅) m-plane GaN surfaces with different oxygen configuration within the anion and cation-rich limits: ideal GaN surfaces of c-plane and m-plane; configurations with 100% replacement of nitrogen by oxygen on the surface c-plane and m-plane; 100% replacement of nitrogen by oxygen in the subsurface bilayer c-plane and m-plane; and configurations with 50% replacement of nitrogen of the surface and subsurface bilayers by oxygens c-plane and m-plane. In both cases, the ideal surface is chosen as the reference.

photocathode↗

The Fe 2 O 3 (0001) Surface Under Electroreduction Conditions: A DFT Study of L-Cysteine Adsorption

Local catalyst surface structure and environment can play a significant role towards catalytic activity and selectivity. Surface functionalization using organic additives, such as amino acid chains or peptides, can alter surface properties. Density Functional Theory calculations are used to evaluate the potential dependent surface stability of different terminations of the Fe 2 O 3 (0001) surface. Adsorption of L-Cysteine in different redox states and through different binding modes (carboxylic: O-Fe, amine: N-Fe and thiol: S-Fe) is evaluated. At moderate electrochemical reducing conditions, Fe 2 O 3 (0001) exposes a partially reduced termination with both surface H atoms and undercoordinated Fe atoms in the outermost layer. L-Cysteine adsorption occurs most preferentially through carboxylic acid, O-Fe, binding and does not significantly alter the relative surface stability of different surface terminations. A partially reduced surface with L-Cysteine functionalization will be stable under electroreduction conditions. As a result, stable functionalization of an oxide material through amino acid chains or peptide adsorption may provide an additional design lever to develop improved catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process intensification approach to enhancing heat and mass transfer: Radio frequency (RF) assisted drying of paper and board

Conventional multi-cylinder drying of paper and board typically relies on both conductive drying from steam-heated cylinders and convective drying, where heated air flows over the paper web surface. Conduction primarily contributes to heat transfer, while convection is the main driver of mass transfer. However, conventional drying systems are heavily dependent on steam, usually powered by fossil fuels, and are often energy-inefficient with high levels of waste. Additionally, these surface-driven processes result in a lower percentage of energy absorption compared to the energy supplied, leading to significant energy losses. To improve this long-standing process, an experimental system was developed to investigate a process intensification approach involving the integration of Radio Frequency (RF) heating, a volumetric electromagnetic technology, alongside traditional conduction and convection drying methods. This study also emphasizes the use of sensors to continuously monitor key parameters such as moisture content, supply system temperatures, sample temperatures, air flows, and drying rates in real-time. The effect of RF as an auxiliary energy source in localized environments at varying moisture levels was explored to optimize industrial drying systems, quantify potential improvements, and provide insights for future studies. Experimental results from trials combining RF with convection and with the base case alternating conduction-convection drying processes are presented. It is shown that RF is a viable process intensification approach for paper drying improving the drying rate and energy intensity at higher moisture contents. These findings offer valuable insights for process intensification and contribute to the process development, modeling, and simulation of advanced paper drying techniques.

42 ENGINEERING↗

Experimental electronic structure of the electrically switchable antiferromagnet CuMnAs

Tetragonal CuMnAs is a room temperature antiferromagnet with an electrically reorientable Néel vector and a Dirac semimetal candidate. Direct measurements of the electronic structure of single-crystalline thin films of tetragonal CuMnAs using angle-resolved photoemission spectroscopy (ARPES) are reported, including Fermi surfaces (FS) and energy-wavevector dispersions. After correcting for a chemical potential shift of ≈ – 390 meV (hole doping), there is excellent agreement of FS, orbital character of bands, and Fermi velocities between the experiment and density functional theory calculations. In addition, 2×1 surface reconstructions are found in the low energy electron diffraction (LEED) and ARPES. This work underscores the need to control the chemical potential in tetragonal CuMnAs to enable the exploration and exploitation of the Dirac fermions with tunable masses, which are predicted to be above the chemical potential in the present samples.

36 MATERIALS SCIENCE↗

Additive Technology in Restoring the Worn Spherical Surface of Crusher Cones

Abstract—Restoration of the spherical surface of a steel 35L cone housing by mechanized surfacing in protective gas is proposed. The method employed does not involve heating of the part before or in the course of surfacing. The coating produced has the required thickness and chemical composition, with specified structure. The coating is strongly bound to the restored surface and is free of pores and cracks.

36 MATERIALS SCIENCE↗

Micro-cone targets for producing high energy and low divergence particle beams

The present invention relates to micro-cone targets for producing high energy and low divergence particle beams. In one embodiment, the micro-cone target includes a substantially cone-shaped body including an outer surface, an inner surface, a generally flat and round, open-ended base, and a tip defining an apex. The cone-shaped body tapers along its length from the generally flat and round, open-ended base to the tip defining the apex. In addition, the outer surface and the inner surface connect the base to the tip, and the tip curves inwardly to define an outer surface that is concave, which is bounded by a rim formed at a juncture where the outer surface meets the tip.

47 OTHER INSTRUMENTATION↗

Flexoinduced ferroelectricity in low-dimensional transition metal dichalcogenides

We developed a Landau-type theory for the description of polar phenomena in low-dimensional transition metal dichalcogenides (TMDs), specifically exploring the flexoelectric origin of the polarization induced by a spontaneous bending and by inversion symmetry breaking due to the interactions with substrate. We consider the appearance of the spontaneous out-of-plane polarization due to the flexoelectric coupling with the strain gradient of the spontaneous surface rippling and surface-induced piezoelectricity. Additionally, performed calculations proved that the out-of-plane spontaneous polarization, originating from the flexoelectric effect in a rippled TMD, is bistable and reversible by a nonuniform electric field. In contrast, the spontaneous polarization induced by a misfit strain and symmetry-sensitive surface-induced piezoelectric coupling, cannot be reversed by an external electric field. Special attention is paid to the spectral analysis of the linear dielectric susceptibility and gain factor, which enhancement is critically important for the observation of the polar phenomena in low-dimensional TMDs by the surface-enhanced vibrational spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energetics of CO 2 and H 2 O adsorption on alkaline earth metal doped TiO 2

The process of CO 2 and H 2 O adsorption on the surface of nano-oxide semiconductors is important in the overall performance of artificial photosynthesis and other applications. In this study, we explored the thermodynamics of CO 2 and H 2 O adsorption on TiO 2 as a function of surface chemistry. We applied gas adsorption calorimetry to investigate the energetics of adsorption of those molecules on the surface of anatase nanoparticles. In an attempt to increase TiO 2 surface affinity to CO 2 and H 2 O, TiO 2 was doped with alkaline earth metals (MgO, CaO, SrO, and BaO) by manipulating the chemical synthesis. Adsorption studies using diffuse reflectance infrared spectroscopy at different temperatures indicate that due to the segregation of alkaline earth metals on the surface of TiO 2 nanoparticles, both CO 2 and subsequent H2O adsorption amounts could be increased. CO 2 adsorbs in two different manners, forming carbonates which can be removed at temperatures lower than 700 °C, and a more stable linear adsorption that remains even at 700 °C. Additionally to the surface energetic effects, doping also increased specific surface area, resulting in further improvement in net gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Freeform Hybrid Manufacturing: Binderjet, Structured Light Scanning, Confocal Microscopy, and CNC Machining

This paper describes a hybrid manufacturing approach for silicon carbide (SiC) freeform surfaces using binder jet additive manufacturing (BJAM) to print the preform and machining to obtain the design geometry. Although additive manufacturing (AM) techniques such as BJAM allow for the fabrication of complex geometries, additional machining or grinding is often required to achieve the desired surface finish and shape. Hybrid manufacturing has been shown to provide an effective solution. However, hybrid manufacturing also has its own challenges, depending on the combination of processes. For example, when the subtractive and additive manufacturing steps are performed sequentially on separate systems, it is necessary to define a common coordinate system for part transfer. This can be difficult because AM preforms do not inherently contain features that can serve as datums. Additionally, it is important to confirm that the intended final geometry is contained within the AM preform. The approach described here addresses these challenges by using structured light scanning to create a stock model for machining. Results show that a freeform surface was machined with approximately 70 µm of maximum deviation from that which was planned.

Dvorak, Jake (ORCID:0000000260989944)↗

First Principles Nonadiabatic Excited-State Molecular Dynamics in NWChem

Computational simulation of non-adiabatic molecular dynamics is an indispensable tool for understanding complex photoinduced processes such as internal conversion, energy transfer, charge separation, and spatial localization of excitons, to name a few. Here, we report an implementation of the fewest-switches surface hopping algorithm in the NWChem computational chemistry program. Here the surface hopping method is combined with linear-response time-dependent density functional theory calculations of adiabatic excited state potential energy surfaces. To treat quantum transitions between arbitrary electronic Born{Oppenheimer states, we have implemented both numerical and analytical differentiation schemes for derivative non-adiabatic couplings. A numerical approach for the time-derivative non-adiabatic couplings together with an analytical method for calculating non-adiabatic coupling vectors is an efficient combination for surface hopping approaches. Additionally, electronic decoherence schemes and a state reassigned unavoided crossings algorithm are also implemented to improve the accuracy of the simulated dynamics and to handle trivial unavoided crossings. We apply our code to study the ultrafast decay of photoexcited benzene, including a detailed analysis of the potential energy surface, population decay time scales, and vibrational coordinates coupled to the excitation dynamics. The development presented in this work is a baseline for future implementations of more sophisticated frameworks for simulating of non-adiabatic molecular dynamics in NWChem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗