Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Validity condition for the local sheath impedance boundary condition and a nonlocal generalization

ICRF sheaths can cause unwanted interactions of high-power RF waves with material surfaces in magnetic fusion devices. In previous work, a local RF sheath impedance boundary condition (BC) was derived for use in ICRF codes together with a microscale (i.e., Debye or sheath width scale) model for obtaining the sheath impedance used in that BC. This local RF sheath BC matches the normal component of current and electrostatic potential across the sheath-plasma interface. Collapsing the matching conditions at the sheath-plasma interface to a BC depends on the assumption of scale separation, which can be violated when conditions along the local radius of curvature of the surface vary sufficiently rapidly. The validity condition is explored in this contribution, with special attention to the case where the magnetic field approaches being tangent to the surface. When the local sheath BC no longer applies, a non-local sheath BC is developed under the assumption of a more relaxed scale separation assumption. It is shown that the non-local sheath BC reduces to the previous local sheath BC under appropriate conditions. Furthermore, a surface-integrated sheath admittance parameter describes the 2D physics in the new BC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response Surface Methodology: An Extensive Potential to Optimize in vivo Photodynamic Therapy Conditions

Purpose: Photodynamic therapy (PDT) is based on the interaction of a photosensitizing (PS) agent, light, and oxygen. Few new PS agents are being developed to the in vivo stage, partly because of the difficulty in finding the right treatment conditions. Response surface methodology, an empirical modeling approach based on data resulting from a set of designed experiments, was suggested as a rational solution with which to select in vivo PDT conditions by using a new peptide-conjugated PS targeting agent, neuropilin-1. Methods and Materials: A Doehlert experimental design was selected to model effects and interactions of the PS dose, fluence, and fluence rate on the growth of U87 human malignant glioma cell xenografts in nude mice, using a fixed drug-light interval. All experimental results were computed by Nemrod-W software and Matlab. Results: Intrinsic diameter growth rate, a tumor growth parameter independent of the initial volume of the tumor, was selected as the response variable and was compared to tumor growth delay and relative tumor volumes. With only 13 experimental conditions tested, an optimal PDT condition was selected (PS agent dose, 2.80 mg/kg; fluence, 120 J/cm{sup 2}; fluence rate, 85 mW/cm{sup 2}). Treatment of glioma-bearing mice with the peptide-conjugated PS agent, followed by the optimized PDT condition showed a statistically significant improvement in delaying tumor growth compared with animals who received the PDT with the nonconjugated PS agent. Conclusions: Response surface methodology appears to be a useful experimental approach for rapid testing of different treatment conditions and determination of optimal values of PDT factors for any PS agent.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Solid of Revolution Time Study using COG11.1 and MCNP6.1

The performance of two continuous energy Monte Carlo transport codes, COG11.1 and MCNP6.1, has been compared for the {sup 239}Pu Jezebel Benchmark using cross sections based on the ENDF/B-VII.1 evaluated nuclear data library. The purpose of this study is to determine the length of time it takes each code to complete a series of criticality calculations, using two different methods to model a solid of revolution. A solid of revolution is essential in many fields of engineering and mathematics, and has been a standard feature in computer-aided design and manufacturing since the 1970's. In the field of criticality safety, a solid of revolution can be used to reproduce and simplify complex engineering drawings and systems that would otherwise require excessive use of geometric primitives and computational resources to achieve a comparable level of fidelity. There are two basic methods to model a solid of revolution: Method 1 (COG) specifies a set of x-y pairs or polar coordinates and rotate the curve about the x-axis. Method 2 (COG and MCNP) creates a set of end-to-end conical frustums and/or cylinders. Method 1 is only available in COG and can be implemented using one surface and sector specification. Method 2 can be implemented in both COG and MCNP. This time study was initially conceived as a result of criticality safety analysis performed for a complex system with a high degree of rotational symmetry. Each COG input deck typically took 1-2 days to run in serial mode. COG input decks were then converted to MCNP format and run on the same computer cluster. Instead of expected 1-2 day runtimes, it took MCNP6.1 more than one week to complete each run. Since MCNP typically runs faster than many codes, these lengthy runtimes were considered unusual. This study attempts to investigate the runtime discrepancy between the two codes. The methods and benchmark in this time study were selected to provide a consistent, generalized approach to modeling an arbitrary solid of revolution. While there are many different ways to model the {sup 239}Pu Jezebel Benchmark, the focus of this study is on investigating the practical difference between the two basic methods to model a surface of revolution. Throughout this study, the only code that maintains reasonably low runtimes is COG11.1 (Method 1). Based on the observed performance of each code and method, it is likely that the divergent runtimes are the result of tracking particles across planes that lie between conical frustums, as opposed to defining the object boundary as a single surface. Slight fluctuations in graphed results were also observed, due to random sampling and CPU loading. This was confirmed by re-running input decks and comparing average runtimes to a preliminary curve fit. From the perspective of a criticality safety analyst, the results of this study are expected to contribute towards understanding one of the practical trade-offs between codes and methods as they apply to real-world analysis. Ultimately, it's about choosing the right tool for the job.

97 MATHEMATICS AND COMPUTING↗

WHONDRS 48 Hour Diel Cycling Study at the Nisqually River, WA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of glacial freeze/thaw cycle-induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Nisqually River, WA, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. Note that the included hydrograph has a separate DOI that should also be cited. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the Columbia River in Washington, USA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of the upstream Priest Rapids Dam-induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Columbia River, WA, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the Jordan River, Israel

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of groundwater pumping induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Jordan River, Israel. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the Erpe River, Germany

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of wastewater treatment plant effluent induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the Erpe River, Germany. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in September 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS 48 Hour Diel Cycling Study at the East Fork Poplar Creek in Tennessee, USA

This dataset is from a sampling campaign completed over the course of 48 hours to investigate the effects of wastewater treatment plant effluent induced water level variation on aqueous chemistry, dissolved organic matter chemistry, and metabolic potential of microbial communities at the East Fork Poplar Creek, TN, USA. Filtered surface water (SW) and pore water (PP) samples were collected every three hours in August 2018. This dataset is one of seven companion datasets that were part of the WHONDRS 48 Hour Diel Cycling Study of freshwater rivers. All seven datasets are available on ESS-DIVE; they can be found by searching for WHONDRS 48 Hour.This package contains a variety of chemical and hydrologic variables. All data types are provided in a standard format. Basic geochemistry analyses (e.g., non-purgeable organic carbon concentration, cations, anions, SpC, pH) were conducted, standardized photos were taken, surface water hydrographs were collated from existing instrumentation, and extensive metadata were captured. Aqueous chemistry variables include USGS codes in the first portion of the variable name (e.g., 00940_Cl_mg_per_L). These codes allow for interoperability with USGS water quality data. In addition, samples were delivered to the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) for high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The data package contains instructions to process the FTICR data based on the user’s specific needs, and sample-level summary indices derived from the FTICR data will be added to the data package. Beyond the data in this data package, metagenomic data are being generated on associated microbial communities. When these data are available, the data package will be updated with information on accessing them. Please contact WHONDRS@pnnl.gov for more information. Please use the data package’s DOI to cite the data package. We ask that you email us at WHONDRS@pnnl.gov to let us know that you're using the data and acknowledge WHONDRS and the U.S. Department of Energy's Subsurface Biogeochemical Research program—which generously provides funding to WHONDRS—in your publications, proposals, presentations, etc. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. Note that the included hydrograph has a separate DOI that should also be cited. There is no obligation to include WHONDRS members as co-authors.

54 ENVIRONMENTAL SCIENCES↗

Numerical Simulation of M9 Megathrust Earthquakes in the Cascadia Subduction Zone

We estimate ground motions in the Pacific Northwest urban areas during M9 subduction scenario earthquakes on the Cascadia megathrust by simulating wave propagation from an ensemble of kinematic source descriptions. Velocities and densities in our computational mesh are defined by integrating the regional Cascadia Community Velocity Model (CVM) v1.6 (Stephenson et al. P-and S-wave velocity models incorporating the Cascadia subduction zone for 3D earthquake ground motion simulations—update for open-file report 2007–1348, US Geological Survey, 2017) including the ocean water layer with a local velocity model of the Georgia basin (Molnar, Predicting earthquake ground shaking due to 1D soil layering and 3D basin structure in SW British Columbia, Canada, 2011), including additional near-surface velocity information. We generate six source realizations, each consisting of a background slip distribution with correlation lengths, rise times and rupture velocities consistent with data from previous megathrust earthquakes (e.g., 2011 M 9 Tohoku or 2010 M 8.8 Maule). We then superimpose M ~ 8 subevents, characterized by short rise times and high stress drops on the background slip model to mimic high-frequency strong ground motion generation areas in the deeper portion of the rupture (Frankel, Bull Seismol Soc Am 107(1):372–386, 2017). The wave propagation is simulated using the discontinuous mesh (DM) version of the AWP finite difference code. We simulate frequencies up to 1.25 Hz, using a spatial discretization of 100 m in the fine grid, resulting in surface grid dimensions of 6540 × 10,728 mesh points. At depths below 8 km, the grid step increases to 300 m. We obtain stable and accurate results for the DM method throughout the simulation time of 7.5 min as verified against a solution obtained with a uniform 100 m grid spacing. Peak ground velocities (PGVs) range between 0.57 and 1.0 m/s in downtown Seattle and between 0.25 and 0.54 m/s in downtown Vancouver, while spectral accelerations at 2 s range between 1.7 and 3.6 m/s 2 and 1.0 and 1.3 m/s 2 , respectively. These long-period ground motions are not significantly reduced if plastic Drucker-Prager yielding in shallow cohesionless sediments is taken into account. Effects of rupture directivity are significant at periods of ~ 10 s, but almost absent at shorter periods. We find that increasing the depth extent of the subducting slab from the truncation at 60 km in the Cascadia CVM version 1.6 to ~ 100 km increases the PGVs by 15% in Seattle and by 40% in Vancouver.

finite difference method↗

A simple method for the measurement of reflective foil emissivity

Reflective metal foil is widely used to reduce radiative heat transfer within the roof space of buildings. Such foils are typically mass-produced by vapor-deposition of a thin metallic coating onto a variety of substrates, ranging from plastic-coated reinforced paper to 'bubble-wrap'. Although the emissivity of such surfaces is almost negligible in the thermal infrared, typically less than 0.03, an insufficiently thick metal coating, or organic contamination of the surface, can significantly increase this value. To ensure that the quality of the installed insulation is satisfactory, Australian building code AS/NZS 4201.5:1994 requires a practical agreed method for measurement of the emissivity, and the standard ASTM-E408 is implied. Unfortunately this standard is not a 'primary method' and requires the use of specified expensive apparatus and calibrated reference materials. At NMIA we have developed a simple primary technique, based on an apparatus to thermally modulate the sample and record the apparent modulation in infra-red radiance with commercially available radiation thermometers. The method achieves an absolute accuracy in the emissivity of approximately 0.004 (k=2). This paper theoretically analyses the equivalence between the thermal emissivity measured in this manner, the effective thermal emissivity in application, and the apparent emissivity measured in accordance with ASTM-E408.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

[Presentation Slides] Code-to-Code Benchmark Study for Thermal Stress Modeling and Preliminary Analysis of the High-temperature Single Heat-Pipe Experiment

In the heat-pipe-cooled microreactor, heat pipes remove heat from the reactor core as a passive heat-transfer device, so the fluid circulation is not required for cooling, which can substantially simplify the overall reactor design. However, given the extremely high temperatures in the core region and potentially large temperature gradients across the structure materials, thermal stresses need to be well-analyzed to ensure structural integrity during normal operations and accident scenarios. This presentation slides discuss finite element method-based thermal-stress analysis for the high-temperature single heat-pipe test article in the Single Primary Heat Extraction and Removal Emulator (SPHERE) facility at Idaho National Laboratory (INL), using two commercial software packages, Abaqus and Star-CCM+. A code-to-code benchmark study was performed to crosscheck the model setup and capability of each code and to gain preliminary insights into the potential thermal stress concerns from the current experimental setup. It is observed the significant thermal stresses happen at the inner surface of the heat pipe hole surrounded by electric heaters where the largest temperature gradients appear. The temperature fields have good agreements between Abaqus and Star-CCM+, while the induced thermal stresses show modest deviations probably due to differences of meshing engines used in these two codes. It is found that the local maximum thermal stresses may reach close to the ultimate tensile strength and yield strength of structural material depending on the heater power. Ultimately, the coupled thermal-structural analysis will help guide the current experimental plan and ensure the facility safety for future experimental study.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Power flow in magnetically insulated transmission lines with ion backscatter effects

Ion backscattering off of surfaces in magnetically insulated transmission lines (MITLs) is often ignored in kinetic simulations of MITL power flow. Backscattering reduces ion current losses and the surface impact heating, which dictates the rate at which surface-adsorbed contaminants are liberated into the anode–cathode gap. Backscatter probabilities are difficult to implement in a kinetic code because there are limited data for incident ion energies less than a few keV. This paper presents an analytic model based on the Rutherford scattering formula that reproduces the measured backscatter probabilities at high incident energies and transitions to the highly reflective behavior expected at low incident energies. The backscatter model is implemented in power flow simulations, which are validated with current loss experiments conducted on the 0.4 TW Mykonos accelerator at Sandia National Laboratories. This simulation setup is then used in a high-current Z-machine shot. In conclusion, backscatter effects are found to be unimportant in the low-current Mykonos regime but significantly reduce current losses at the Z-machine scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a CO 2 Chemical Sensor for Downhole CO 2 Monitoring in Carbon Sequestration

Geologic storage of carbon dioxide (CO 2 ) has been proposed as a viable means for reducing anthropogenic CO 2 emissions. The means for geological sequestration of CO 2 is injection of supercritical CO 2 underground, which requires the CO 2 to remain either supercritical, or in solution in the water/brine present in the underground formation. However, there are aspects of geologic sequestration that need further study, particularly in regards to safety. To date, none of the geologic sequestration locations have been tested for storage integrity under the changing stress conditions that apply to the sequestration of very large amounts of CO 2 . Establishing environmental safety and addressing public concerns require widespread monitoring of the process in the deep subsurface. In addition, studies of subsurface carbon sequestration such as flow simulations, models of underground reactions and transports require a comprehensive monitoring process to accurately characterize and understand the storage process. Real-time information about underground CO 2 movement and concentration change is highly helpful for: (1) better understanding the uncertainties present in CO 2 geologic storage; (2) improvement of simulation models; and (3) evaluation of the feasibility of geologic CO 2 storage. Current methods to monitor underground CO 2 storage include seismic, geoelectric, isotope and tracer methods, and fluid sampling analysis. However, these methods commonly resulted low resolution, high cost, and the inability to monitor continuously over the long time scales of the CO 2 storage process. A preferred way of monitoring in-situ underground CO 2 migration is to continuous measure CO 2 concentration change in brine during the carbon storage process. An approach to obtain the real time information on CO 2 concentration change in formation solution is highly demanded in carbon storage to understand the CO 2 migration subsurface and to answer the public safety problem. The objective of the study is to develop a downhole CO 2 sensor that can in-situ, continuously monitor CO 2 concentration change in deep saline. The sensor is a Severinghaus-type CO 2 sensor with small size, which renders it can be embedded in monitoring well casing or integrated with pressure/temperature transducers, enabling the development of “smart” wells. The studies included: (1) prepare and characterize metal-oxide electrodes. Test the electrodes response to pH change. Investigate different ions and brine concentration effects on the electrode’s performance. Study the stability of the electrode in brine solution; (2) fabricate a downhole CO 2 sensor with the metal-oxide electrodes prepared in the laboratory. Test the performance of the CO 2 sensor in brine solutions. Study high pressure effects on the performance of the sensor; (3) design and conduct CO 2 /brine coreflooding experiments with the CO2 sensor. Monitor CO 2 movement along the core and test the performance of the sensor in coreflooding tests. Develop a data acquisition system that can digitize the sensor’s output voltage. Our completed research has resulted in deep understanding of downhole CO 2 sensor development and CO 2 monitoring in CO 2 storage process. The developed downhole CO 2 sensor included a metal-oxide electrode, a gas-permeable membrane, a porous steel cup, and a bicarbonate-based internal electrolyte solution. Iridium oxide-based electrode was prepared and used for preparation the CO 2 sensor. The prepared iridium oxide-based electrode displayed a linearly response to pH change. Different factors such as different ions and ions concentration, temperature, and pressure effects on the electrode performance on pH response were investigated. The results indicated that the electrode exhibited a good performance even in high salt concentration of produced water. To improve the electrode performance under high pressure, IrO 2 nanoparticles with the particle size in the range of 1-2 nm were prepared and electrodeposited on stainless steel substrate by cyclic voltammetry. It was observed that the thin film of iridium oxide was formed on the substrate surface and such iridium oxide-based electrode displayed excellent performance under high pressure for longer term. A downhole CO 2 sensor with the iridium oxide-based electrode was prepared. The working principle of the CO 2 sensor is based on the measurement of the pH change of the internal electrolyte solution caused by the hydrolysis of CO 2 and then determination of the CO 2 concentration in water. The prepared downhole CO 2 sensor had the size of diameter of 0.7 in. and length of 1.5 in. The sensor was tested under the pressures of 500 psi, 2,000 psi, and 3,000 psi. A linear correlation was observed between the sensor potential change and dissolved CO 2 concentration in water. The response time of the CO 2 sensor was in the range of 60-100 minutes. Further tests indicated that the CO 2 sensor exhibited good reproducibility under high pressure. A CO 2 /brine coreflooding system was constructed to simulate the real-world CO 2 storage process. The prepared downhole CO 2 sensor was loaded in the system to monitor CO 2 movement during CO 2 /brine coreflooding test. The results indicated that the sensor could detect CO 2 movement in the tests. Further studies showed that the sensor could be recovered by brine flooding after CO 2 /brine flushed the core. The results of the coreflooding tests demonstrated that the sensor had potential application for CO 2 monitoring in carbon sequestration. A data acquisition system for the downhoe CO 2 sensor was developed and coded. The system converted the sensor output signal into digital data and transported the data from downhole to wellhead surface. The data acquisition system was tested and evaluated in the laboratory with the prepared sensor for data collection.

36 MATERIALS SCIENCE↗

Implementation of a generalized actuator disk wind turbine model into the weather research and forecasting model for large-eddy simulation applications

A generalized actuator disk (GAD) wind turbine parameterization designed for large-eddy simulation (LES) applications was implemented into the Weather Research and Forecasting (WRF) model. WRF-LES with the GAD model enables numerical investigation of the effects of an operating wind turbine on and interactions with a broad range of atmospheric boundary layer phenomena. Numerical simulations using WRF-LES with the GAD model were compared with measurements obtained from the Turbine Wake and Inflow Characterization Study (TWICS-2011), the goal of which was to measure both the inflow to and wake from a 2.3-MW wind turbine. Data from a meteorological tower and two light-detection and ranging (lidar) systems, one vertically profiling and another operated over a variety of scanning modes, were utilized to obtain forcing for the simulations, and to evaluate characteristics of the simulated wakes. Simulations produced wakes with physically consistent rotation and velocity deficits. Two surface heat flux values of 20 W m –2 and 100 W m –2 were used to examine the sensitivity of the simulated wakes to convective instability. Simulations using the smaller heat flux values showed good agreement with wake deficits observed during TWICS-2011, whereas those using the larger value showed enhanced spreading and more-rapid attenuation. This study demonstrates the utility of actuator models implemented within atmospheric LES to address a range of atmospheric science and engineering applications. In conclusion, validated implementation of the GAD in a numerical weather prediction code such as WRF will enable a wide range of studies related to the interaction of wind turbines with the atmosphere and surface.

17 WIND ENERGY↗

HANFORD DOUBLE SHELL TANK THERMAL AND SEISMIC PROJECT SEISMIC ANALYSIS OF HANFORD DOUBLE SHELL TANKS

M&D Professional Services, Inc. (M&D) is under subcontract to Pacific Northwest National Laboratories (PNNL) to perform seismic analysis of the Hanford Site Double-Shell Tanks (DSTs) in support of a project entitled Double-Shell Tank (DST) Integrity Project - DST Thermal and Seismic Analyses. The original scope of the project was to complete an up-to-date comprehensive analysis of record of the DST System at Hanford in support of Tri-Party Agreement Milestone M-48-14. The work described herein was performed in support of the seismic analysis of the DSTs. The thermal and operating loads analysis of the DSTs is documented in Rinker et al. (2004). Although Milestone M-48-14 has been met, Revision I is being issued to address external review comments with emphasis on changes in the modeling of anchor bolts connecting the concrete dome and the steel primary tank. The work statement provided to M&D (PNNL 2003) required that a nonlinear soil structure interaction (SSI) analysis be performed on the DSTs. The analysis is required to include the effects of sliding interfaces and fluid sloshing (fluid-structure interaction). SSI analysis has traditionally been treated by frequency domain computer codes such as SHAKE (Schnabel, et al. 1972) and SASSI (Lysmer et al. 1999a). Such frequency domain programs are limited to the analysis of linear systems. Because of the contact surfaces, the response of the DSTs to a seismic event is inherently nonlinear and consequently outside the range of applicability of the linear frequency domain programs. That is, the nonlinear response of the DSTs to seismic excitation requires the use of a time domain code. The capabilities and limitations of the commercial time domain codes ANSYS{reg_sign} and MSC Dytran{reg_sign} for performing seismic SSI analysis of the DSTs and the methodology required to perform the detailed seismic analysis of the DSTs has been addressed in Rinker et al (2006a). On the basis of the results reported in Rinker et al. (2006a), it is concluded that time-domain SSI analysis using ANSYS{reg_sign} is justified for predicting the global response of the DSTs. The most significant difference between the current revision (Revision 1) of this report and the original issue (Revision 0) is the treatment of the anchor bolts that tie the steel dome of the primary tank to the concrete tank dome.

36 MATERIALS SCIENCE↗

Qualification of Numerical and Semi-Analytical Modeling Codes for Thermal Design of HLW Repository - 18455

Disposal in a geological repository is a viable option for safely isolating high-level radioactive waste. Thermal processes induced by decay heat from the radioactive waste may impact the integrity of the engineered barrier system, and may lead to fluid flow and transport; and the associated migration of radionuclides. This study looks at an analysis of thermal conduction for the emplacement of high-level waste in a repository located in bedded salt. The simulations used analytical and numerical methods to study conductive heat transport in a repository. This study concentrated on heat flow in a central waste package with contributions from adjacent waste packages and drifts. Of particular importance to this work is comparison of predictions of peak temperature at the drift wall and at the waste package surface using different solution methods. Simulation results of analytical and numerical modeling methods are compared. The results show that predictions of the codes were comparable under identical initial and boundary conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CONSTRUCTION OF AN EARTH MODEL: ANALYSIS OF EXOPLANET LIGHT CURVES AND MAPPING THE NEXT EARTH WITH THE NEW WORLDS OBSERVER

The orbital light curve of a terrestrial exoplanet will likely contain valuable information about the surface and atmospheric features of the planet, both in its overall shape and hourly variations. We have constructed an empirically based code capable of simulating observations of the Earth from any orientation, at any time of year with continuously updated cloud and snow coverage with a New Worlds Observatory. By simulating these observations over a full orbital revolution at a distance of 10 pc we determine that the detection of an obliquity or seasonal terrain change is possible at low inclinations. In agreement with other studies, a 4 m New Worlds Observer can accurately determine the rotation rate of the planet at a success rate from {approx}30% to 80% with only 5 days of observations depending on the signal to noise of the observations. We also attempt simple inversions of these diurnal light curves to sketch a map of the reflecting planet's surface features. This mapping technique is only successful with highly favorable systems and in particular requires that the cloud coverage must be lower than the Earth's average. Our test case of a 2 M {sub +} planet at 7 pc distance with low exo-zodiacal light and 25% cloud coverage produced crude, but successful results. Additionally, with these highly favorable systems NWO may be able to discern the presence of liquid surface water (or other smooth surfaces) though it requires a complex detection available only at crescent phases in high inclination systems.

99 GENERAL AND MISCELLANEOUS↗

SU-E-T-796: Variation of Surface Photon Energy Spectra On Bone Heterogeneity and Beam Obliquity Between Flattened and Unflattened Beam

Purpose: This study investigates the spectra of surface photon energy and energy fluence in the bone heterogeneity and beam obliquity using flattened and unflattened photon beams. The spectra were calculated in a bone and water phantom using Monte Carlo simulation (the EGSnrc code). Methods: Spectra of energy, energy fluence and mean energy of the 6 MV flattened and unflattened photon beams (field size = 10 × 10 cm{sup 2}) produced by a Varian TrueBEAM linear accelerator were calculated at the surfaces of a bone and water phantom using Monte Carlo simulations. The spectral calculations were repeated with the beam angles turned from 0° to 15°, 30° and 45° in the phantoms. Results: It is found that the unflattened photon beams contained more photons in the low-energy range of 0 – 2 MeV than the flattened beams with a flattening filter. Compared to the water phantom, both the flattened and unflattened beams had slightly less photons in the energy range < 0.4 MeV when a bone layer of 1 cm is present under the phantom surface. This shows that the presence of the bone decreased the low-energy photons backscattered to the phantom surface. When the photon beams were rotated from 0° to 45°, the number of photon and mean photon energy increased with the beam angle. This is because both the flattened and unflattened beams became more hardened when the beam angle increased. With the bone heterogeneity, the mean energies of both photon beams increased correspondingly. This is due to the absorption of low-energy photons by the bone, resulting in more significant beam hardening. Conclusion: The photon spectral information is important in studies on the patient’s surface dose enhancement when using unflattened photon beams in radiotherapy.

60 APPLIED LIFE SCIENCES↗