Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Amphiphilic Baskets for Supramolecular Nanoarchitectures at Interfaces: Inverted Monolayer Formation on Water

Interfacial chemistry of molecular baskets remains poorly understood despite their promise for supramolecular applications of detection and sequestration of toxic molecules including those of illicit drugs, organophosphorus compounds, and anticancer agents. We present a fundamental investigation of the interfacial behavior of three amphiphilic supramolecular baskets (ASB 4, 8, and 12), having increasingly longer yet linear alkyl chains at the top of their bowl-shaped cavity. The studies were completed at the air−water interface to elucidate surface activity, interfacial stability, self-assembly, and monolayer organization that drive inverted monolayer formation, in which the molecular arms orient toward the aqueous phase in a configuration opposite to that typically observed for lipids. Herein, surface pressure−area isotherms of ASB 4, 8, 12, deposited on a water surface, were performed in tandem with nonequilibrium relaxation experiments to quantify surface activity, thermodynamic stability, and monolayer compressibility of the baskets’ monolayer assembly. Brewster angle microscopy enabled direct visualization of morphological evolution, aggregation, and packing at the interface. We show that systematic extension of the hydrocarbon arms, from four to 12 methylene groups, progressively modifies intermolecular packing, drives distinct two-dimensional aggregation pathways, and increases number densities at the air−water interface. Atomistic molecular dynamics simulations corroborate many of these experimentally observed trends and provide mechanistic detail on the cooperative roles of basket topology and interfacial concentration in regulating the hydration structure and dynamics within the cavities generated by surface-adsorbing baskets, consistent with observed variations in surface activity and packing. Our results establish how the topology of these unique supramolecules and their concentration govern interfacial organization and offer a rational framework for designing amphiphiles with predictable behavior at soft interfaces.

Hydrocarbons↗

Nitrogen termination of single crystal (100) diamond surface by radio frequency N{sub 2} plasma process: An in-situ x-ray photoemission spectroscopy and secondary electron emission studies

In this letter, we report the electronic and chemical properties of nitrogen terminated (N-terminated) single crystal (100) diamond surface, which is a promising candidate for shallow NV{sup −} centers. N-termination is realized by an indirect RF nitrogen plasma process without inducing a large density of surface defects. Thermal stability and electronic property of N-terminated diamond surface are systematically investigated under well-controlled conditions by in-situ x-ray photoelectron spectroscopy and secondary electron emission. An increase in the low energy cut-off of the secondary electron energy distribution curve (EDC), with respect to a bare diamond surface, indicates a positive electron affinity of the N-terminated diamond. Exposure to atomic hydrogen results in reorganization of N-terminated diamond to H-terminated diamond, which exhibited a negative electron affinity surface. The change in intensity and spectral features of the secondary electron EDC of the N-terminated diamond is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stabilization of tearing modes by oscillating the resonant surface

The effects of the plasma current modulation on the linear instability of the tearing mode are numerically investigated. It is found that the tearing mode can be stabilized if the frequency of the modulation is suitable and the oscillation amplitude of the resonant surface position is large enough. The power needed for the lower-hybrid-current-drive to stabilize the tearing mode by oscillating the position of the resonant surface is comparable to the power consumption of the conventional method of tearing mode stabilization by using the electron-cyclotron-current-drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Subnanometer Thick Native sp 2 Carbon on Oxidized Diamond Surfaces

Oxygen-terminated diamond has a wide breadth of applications, which include stabilizing near-surface color centers, semiconductor devices, and biological sensors. Despite the vast literature on characterizing functionalization groups on diamond, the chemical composition of the shallowest portion of the surface (<1 nm) is challenging to probe with conventional techniques like XPS and FTIR. In this work, we demonstrate the use of angleresolved XPS to probe the first ten nanometers of both oxygen and hydrogen terminated (100) single-crystalline diamond grown via chemical vapor deposition (CVD). With the use of consistent peakfitting methods, the peak identities and relative peak binding energies were identified for sp 2 carbon, ether, hydroxyl, carbonyl, and C−H groups for both of these diamond surface terminations. For the oxygen-terminated sample, we also quantified the thickness of the sp 2 carbon layer situated on top of the bulk sp 3 diamond bonded carbon to be 0.3 ± 0.1 nm, based on the analysis of the Auger electron spectra and D-parameter calculations. These results indicate that the majority of the oxygen is bonded to the sp 2 carbon layer on the diamond, and not directly to the sp 3 diamond bonded carbon.

Carbon↗

Functioning Mechanism of AlF 3 Coating on the Li- and Mn-Rich Cathode Materials

We report systematic studies of the microstructural changes of uncoated and AlF3-coated Li-rich Mn-rich (LMR) cathode materials (Li1.2Ni0.15Co0.10Mn0.55O2) before and after cycling using a combination of aberration-corrected scanning/transmission electron microscopy (S/TEM) and electron energy loss spectroscopy (EELS). TEM coupled with EELS provides detailed information about the crystallographic and electronic structure changes that occur after cycling, thus revealing the fundamental improvement mechanism of surface coating. The results demonstrate that the surface coating reduces oxidation of the electrolyte at high voltage, suppressing the accumulation of a thick solid electrolyte interface (SEI) layer on electrode particle surface. Surface coating significantly enhances the stability of the surface structure and protects the electrode from severe etching/corrosion by the acidic species in the electrolyte, reducing the formation of etched surfaces and corrosion pits. Moreover, surface coating alleviates the undesirable voltage fade by mitigating layered to spinel-like phase transformation in the bulk region of the material. These fundamental findings may also be widely applied to explain the functioning mechanisms of other surface coatings used in a broad range of electrode materials.

Zheng, Jianming↗

Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials

Residual impurities such as lithium carbonate and hydroxide are a major concern for accelerating parasitic reactions at the cathode electrolyte interface of lithium-ion batteries. Removal of these lithium-bearing species becomes a necessity for high-performance nickel-rich cathode materials. Instead of directly removing these impurities through washing steps, a wet impregnation process is employed to convert these detrimental surface impurities into beneficial surface coating on nickel-rich cathode materials. Specifically, the pristine cathode material is treated with Al(H 2 PO 4 ) 3 solution to convert undesired compounds into Li 3 PO 4 and AlPO 4 , both of which are considered positive surface coating materials for high-voltage cathodes. It is found that the introduced modification greatly suppresses the interfacial impedance hike and improves the capacity retention of the cathode material after repeating charging/discharging. It is believed that these benefits are realized through the modification of the surface chemistry of the cathode material, which helps to slow down the parasitic reactions and reduce the damage to the cathode material.

25 ENERGY STORAGE↗

Electronic Structure Calculations for improving Catalyst Design for Use in the Hybrid Sulfur Cycle

The hybrid sulfur cycle is a promising means for efficient production of large quantities of hydrogen with a small carbon footprint. Furthermore, there is a demonstrated need to design catalysts that are sulfur tolerant and have stability at high temperatures and reduced activation energies. Theoretical calculations can serve as a blueprint for fulfilling these needs by providing fundamental mechanistic insights to guide future experimental studies. Density functional theory was used to calculate the energetics of Pt-Au systems. Adsorption energetics for the unary and binary structures were investigated to provide mechanistic insights for improved catalyst design. Results conclude that adsorption of the SO 2 molecule is further stabilized on the Pt surface with a Pt-0 dative bond compared to Au. Energetics suggest that the adsorbates are more stabilized in the Pt surface due to a stabilization of the S p bands in the electronic structure. Examination of the density of states support the postulation that SO 2 is more weakly bound to Au, thereby leading to better catalytic performance compared to Pt. These results are encouraging and we expect there to be a weakening effect of ligand adsorption on the Pt/Au surfaces when an electric field is applied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonstoichiometry, Structure, and Properties of BiFeO 3 Films

In this work, we explore the effect of growth conditions on the cation and anion chemistry, electrical leakage, conduction mechanisms, and ferroelectric and dielectric behavior of BiFeO 3 . Although it is possible to produce single-phase, coherently strained films in all cases, small variations in the pulsed-laser deposition growth process, specifically the laser repetition rate and target composition, result in films with chemistries ranging from 10% Bi-deficiency to 4% Bi-excess and films possessing Bi gradients as large a 6% across the film thickness. Corresponding variations and gradients in the O chemistry are also observed. As a result of the varying film chemistry, marked differences in surface and domain morphology are observed wherein Bi-deficiency stabilizes atomically smooth surfaces and ordered stripe domains. Subsequent investigation of the current-voltage response reveals large differences in leakage current density arising from changes in both the overall stoichiometry and gradients. In turn, the film stoichiometry drives variations in the dominant conduction mechanism including examples of Schottky, Poole-Frenkel, and modified Poole-Frenkel emission depending on the film chemistry. Lastly, slightly Bi-excess films are found to exhibit the best low-frequency ferroelectric and dielectric response while increasing Bi-deficiency worsens the low-frequency ferroelectric performance and reduces the dielectric permittivity.

36 MATERIALS SCIENCE↗

Visible photoelectrochemical water splitting into H 2 and O 2 in a dye-sensitized photoelectrosynthesis cell

A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO 2 /TiO 2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly. The assembly, [(4,4’-(PO 3 H 2 ) 2 bpy) 2 Ru(4-Mebpy-4’-bimpy)Ru(tpy)(OH 2 )] 4+ ([RuaII-RubII-OH 2 ] 4+ , combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO 2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al 2 O 3 or TiO 2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO 2 /TiO 2 |-[Ru a II -Ru b II -OH 2 ] 4+ (Al 2 O 3 or TiO 2 ) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H 2 and O 2 . The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO 2 /TiO 2 core/shell compared with nanoITO/TiO 2 with the same assembly results in photocurrent enhancements of ~5. In conclusion, systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm 2 with 445-nm, ~90-mW/cm 2 illumination in a phosphate buffer at pH 7.

36 MATERIALS SCIENCE↗

Photoelectrochemical Stability and Alteration Products of n-Type Single-Crystal ZnO Photoanodes

The photoelectrochemical stability and surface-alteration characteristics of doped and undoped n-type ZnO single-crystal photoanode electrodes were investigated. The single-crystal ZnO photoanode properties were analyzed using current-voltage measurements plus spectral and time-dependent quantum-yield methods. These measurements revealed a distinct anodic peak and an accompanying cathodic surface degradation process at negative potentials. The features of this peak depended on time and the NaOH concentration in the electrolyte, but were independent of the presence of electrode illumination. Current measurements performed at the peak indicate that charging and discharging effects are apparently taking place at the semiconductor/electrolyte interface. This result is consistent with the significant reactive degradation that takes place on the ZnO single crystal photoanode surface and that ultimately leads to the reduction of the ZnO surface to Zn metal. The resulting Zn-metal reaction products create unusual, dendrite-like, surface alteration structural features that were analyzed using x-ray diffraction, energy-dispersive analysis, and scanning electron microscopy. ZnO doping methods were found to be effective in increasing the n-type character of the crystals. Higher doping levels result in smaller depletion widths and lower quantum yields, since the minority carrier diffusion lengths are very short in these materials.

Paulauskas, I. E.↗

Investigating Future Arctic Sea Ice Loss and Near–Surface Wind Speed Changes Related to Surface Roughness Using the Community Earth System Model

The Arctic is undergoing a pronounced and rapid transformation in response to changing greenhouse gasses, including reduction in sea ice extent and thickness. There are also projected increases in near-surface Arctic wind. This study addresses how the winds trends may be driven by changing surface roughness and/or stability in different Arctic regions and seasons, something that has not yet been thoroughly investigated. We analyze 50 experiments from the Community Earth System Model Version 2 (CESM2) Large Ensemble and five experiments using CESM2 with an artificially decreased sea ice roughness to match that of the open ocean. We find that with a smoother surface there are higher mean wind speeds and slower mean ice speeds in the autumn, winter, and spring. The artificially reduced surface roughness also strongly impacts the wind speed trends in autumn and winter, and we find that atmospheric stability changes are also important contributors to driving wind trends in both experiments. In contrast to the clear impacts on winds, the sea ice mean state and trends are statistically indistinguishable, suggesting that near-surface winds are not major drivers of Arctic sea ice loss. Two major results of this work are: (a) the near-surface wind trends are driven by changes in both surface roughness and near-surface atmospheric stability that are themselves changing from sea ice loss, and (b) the sea ice mean state and trends are driven by the overall warming trend due to increasing greenhouse gas emissions and not significantly impacted by coupled feedbacks with the surface winds.

54 ENVIRONMENTAL SCIENCES↗

Ultraporous, Water Stable, and Breathing Breathing Zirconium-Based Metal-Organic Frameworks with ftw Topology

‘Breathing’ metal–organic frameworks (MOFs) are an emerging class of soft porous crystals (SPCs) with potential for high working capacity for gas storage applications. However, most breathing MOFs have low stability and/or low surface area. Here we report a water-stable, high surface area, breathing MOF of ftw topology, NU-1105. While Zr6-oxo clusters as nodes introduce water stability in NU-1105, its high surface area and breathing character stem from its pyrene-based tetracarboxylate (Py-FP) linkers, in which the fluorene units (F) in the FP ‘arms’ play a key role in promoting breathing behavior. During gas sorption studies, the ‘closed pore’ (cp) ? ‘open pore’ (op) transition of NU-1105 occurs at a propane pressure of ~3 bar. At 1 bar, NU-1105 is in its cp form and adsorbs less propane than it would in its op form, highlighting improved working capacity. In-situ powder X-ray diffraction during propane sorption was used to track the cp ? op transition, and molecular modeling was used to elucidate the structure of the op and cp forms of NU-1105. According to TD-DFT calculations, the proposed conformations of the Py-FP linkers in the op and cp forms are consistent with the measured excitation and emission spectra of the op and cp forms of NU-1105. Similar structural transitions are also observed in the porphyrinic MOF NU-1104 depending on the identity of the porphyrin core; we observed breathing behavior if the constituent Por-PTP linker is non-metallated.

Breathing, Metal Organic Frameworks↗

Determining the Role of Synthesis and Reaction Conditions on the Exposed Surface and Shape of ..beta..-Mo2C Catalysts

The production of drop-in quality biofuels typically can be achieved through catalytic fast pyrolysis (CFP) of biomass, followed by hydrodeoxygenation (HDO) of the vapor-phase product to reduce the oxygen content and stabilize the bio-oil product. To favor selectivity toward desired deoxygenation products, bifunctional catalysts with both acidic and hydrogenation sites are often employed. Due to both its oxophilicity and its ability to promote hydrogenation reactions, molybdenum carbide catalysts have shown promise for promoting the HDO of CFP vapors. However, the surface structure and composition of carbide catalyst particles are not well understood, precluding the establishment of fundamental structure-function relationships needed for the rational development of molybdedum carbide for HDO, as well as other reactions. For orthorhombic ..beta..-Mo2C, the (100) facet is largely studied for computational surface-reaction analyses, possibly due to its similarities with the close-packed (111) facet of noble-metal catalysts. However, it has previously been postulated through ab initio thermodynamic studies that the (111), (110), and (011) facets are most stable, though there is no consensus. Furthermore, while a majority of previous surface stability analyses of ..beta..-Mo2C focus on bulk terminations, the highly carburizing synthesis conditions and the use of ..beta..-Mo2C in carbon-containing reaction applications could introduce non-stoichiometric coverages of surface carbon. As such, this study uses ab initio thermodynamics calculations to assess the relative surface stability of the low-index facets of ..beta..-Mo2C, including consideration of varying the coverage of surface carbon. From this information, Wulff constructions are utilized to predict the synthesis and reaction condition-dependent shape and surface carbon composition of ..beta..-Mo2C catalyst particles.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

Stabilization of the Metastable Lead Iodide Perovskite Phase via Surface Functionalization

Metastable structural polymorphs can have superior properties and applications to their thermodynamically stable phases, but the rational synthesis of metastable phases is a challenge. Here in this paper, a new strategy for stabilizing metastable phases using surface functionalization is demonstrated using the example of formamidinium lead iodide (FAPbI 3 ) perovskite, which is metastable at room temperature (RT) but holds great promises in solar and light-emitting applications. We show that, through surface ligand functionalization during direct solution growth at RT, pure FAPbI 3 in the cubic perovskite phase can be stabilized in nanostructures and thin films at RT without cation or anion alloying. Surface characterizations reveal that long-chain alkyl or aromatic ammonium (LA) cations bind to the surface of perovskite structure. Calculations show that such functionalization reduces the surface energy and plays a dominant role in stabilizing the metastable perovskite phase. Excellent photophysics and optically pumped lasing from the stabilized single-crystal FAPbI 3 nanoplates with low thresholds were demonstrated. High-performance solar cells can be fabricated with such directly synthesized stabilized phase-pure FAPbI3 with a lower bandgap. Our results offer new insights on the surface chemistry of perovskite materials and provide a new strategy for stabilizing metastable perovskites and metastable polymorphs of solid materials in general.

14 SOLAR ENERGY↗

Effects of ion sputtering on plutonium surfaces

Scanning tunneling microscopy has been performed on an electro-polished gallium-stabilized delta-phase plutonium sample under ultra-high vacuum conditions. The images obtained were used to measure surface roughness as ion sputtering and annealing was applied to the plutonium sample. It was demonstrated that sputter/anneal cycles progressively increased the surface roughness of the plutonium. Furthermore, Auger and scanning tunneling spectroscopy measurements revealed an initially unstable and dynamically changing surface that became increasingly stable as sputter/anneal cycles were applied. The stabilized surface region contained within the sputter crater was observed to be unchanged for up to 17 months after the final sputter anneal cycle.

36 MATERIALS SCIENCE↗

Dependence of the Electron Beam Energy and Types of Surface to Determine EBSD Indexing Reliability in Yttria-Stabilized Zirconia

Electron backscatter diffraction (EBSD) is a powerful technique for the surface microstructure analysis. EBSD analysis of cubic yttria-stabilized zirconia (YSZ) in two and three dimensions (2-D, 3-D) is demonstrated using sequential slicing from a focused ion beam (FIB) followed by EBSD mapping to represent 3-D reconstructed high density grain structure with random orientation. The statistics related to accuracy of EBSD band detection shows that probability of accurate grain orientation detection increased significantly when the electron beam energy is increased from 10 kV to 30 kV. As a result of better sampling with increased interaction volume, a disparity between local and average grain orientation angle also exhibited the dependence of the electron beam energy to determine the accuracy of grain orientation. To study the accuracy and quality of EBSD band detection as a function of surface roughness and over layer formation, rapid EBSD measurement tests are performed on (a) YSZ surfaces ion-polished at ion beam energies of 65 nA at 30 kV and 1 nA at 30 kV and (b) carbon coated versus uncoated YSZ surfaces. The EBSD results at both 10 kV and 30 kV electron beam energies indicate that EBSD band detection accuracy is negatively affected by surface roughness and amorphous over layer formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Project Title: Fundamental Studies of Surface-Functionalized Mesoporous Carbons for Thermodynamic Stabilization and Reversibility of Metal Hydrides

The objective of this project is to understand the hydride/active-framework interactions that will allow designed functionalities to make use of unstable complex hydrides (those with ΔH° too small or even negative) for hydrogen storage. The desired interactions of the metal hydride (MH) nanoparticles (NPs) with the functional porous carbon (FPC) hosts will be achieved by controlling the electron donating properties of nanoporous carbons through known and controllable doping of the templates with heteroatom nitrogen.

08 HYDROGEN↗

Pit Stability Predictions of Additively Manufactured SS316 Surfaces Using Finite Element Analysis

Stainless steels are susceptible to localized forms of corrosion attack, such as pitting. The size and lifetime of a nucleated pit can vary, depending on a critical potential or current density criterion, which determines if the pit repassivates or continues growing. This work uses finite element method (FEM) modeling to compare the critical pit radii predicted by thermodynamic and kinetic repassivation criteria. Experimental electrochemical boundary conditions are used to capture the active pit kinetics. Geometric and environmental parameters, such as the pit shape and size (analogous to additively manufactured lack-of-fusion pores), solution concentration, and water layer thickness were considered to assess their impact on the pit repassivation criterion. The critical pit radius (the transition point from stable growth to repassivation) predicted for a hemispherical pit was larger when using the repassivation potential (E rp ) criteria, as opposed to the current density criteria (pit stability product). Including both the pit stability product and E rp into its calculations, the analytical maximum pit model predicted a critical radius two times more conservative than the FEA approach, under the conditions studied herein. The complex pits representing lack-of-fusion pores were shown to have minimal impact on the critical radius in atmospheric conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗