Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Simulation studies for surfaces and materials strength

Optimum energies and structures were estimated for single step ledges formed on the diamond (111) surface. Binding energies of carbon atoms adsorbed on a (2x1) reconstructed Si(100) surface were calculated as a function of sub-monolayer coverages. Calculations were conducted to analyze the strain dependence of the binding energy of a carbon adatom deposited on a (2x1) dimerized Si(100) surface. Details and results of these studies are given as appendices.

Halicioglu, Timur↗

Multilayer Composite Pressure Vessels

A method has been devised to enable the fabrication of lightweight pressure vessels from multilayer composite materials. This method is related to, but not the same as, the method described in gMaking a Metal- Lined Composite-Overwrapped Pressure Vessel h (MFS-31814), NASA Tech Briefs, Vol. 29, No. 3 (March 2005), page 59. The method is flexible in that it poses no major impediment to changes in tank design and is applicable to a wide range of tank sizes. The figure depicts a finished tank fabricated by this method, showing layers added at various stages of the fabrication process. In the first step of the process, a mandrel that defines the size and shape of the interior of the tank is machined from a polyurethane foam or other suitable lightweight tooling material. The mandrel is outfitted with metallic end fittings on a shaft. Each end fitting includes an outer flange that has a small step to accommodate a thin layer of graphite/epoxy or other suitable composite material. The outer surface of the mandrel (but not the fittings) is covered with a suitable release material. The composite material is filament- wound so as to cover the entire surface of the mandrel from the step on one end fitting to the step on the other end fitting. The composite material is then cured in place. The entire workpiece is cut in half in a plane perpendicular to the axis of symmetry at its mid-length point, yielding two composite-material half shells, each containing half of the foam mandrel. The halves of the mandrel are removed from within the composite shells, then the shells are reassembled and bonded together with a belly band of cured composite material. The resulting composite shell becomes a mandrel for the subsequent steps of the fabrication process and remains inside the final tank. The outer surface of the composite shell is covered with a layer of material designed to be impermeable by the pressurized fluid to be contained in the tank. A second step on the outer flange of each end fitting accommodates this layer. Depending on the application, this layer could be, for example, a layer of rubber, a polymer film, or an electrodeposited layer of metal. If the fluid to be contained in the tank is a gas, then the best permeation barrier is electrodeposited metal (typically copper or nickel), which can be effective at a thickness of as little as 0.005 in (.0.13 mm). The electrodeposited metal becomes molecularly bonded to the second step on each metallic end fitting. The permeation-barrier layer is covered with many layers of filament-wound composite material, which could be the same as, or different from, the composite material of the inner shell. Finally, the filament-wound composite material is cured in an ov

DeLay, Tom↗

An observation of the Gulf Stream surface front structure by ship, aircraft, and satellite.

Evaluation of observations of surface temperature and salinity along the western edge of the Gulf Stream made from a ship and of concurrent temperature observations obtained by instrumented aircraft at six altitudes. The major feature along a five-kilometer line normal to the Stream's edge is a temperature gradient of about 0.75 C/kilometer within which are embedded two abrupt temperature increases of about 1.5 C. Temperature variations were compensated by salinity variations, yielding nearly constant density through the frontal zone; a sharp lateral current shear was associated with the thermohaline mixing region between the steps. The attenuation of surface temperature measured by the airborne radiometer was compared with a theoretical model. The analysis supports the view that a two-part correction technique is required: one part for bulk-skin temperature differences, and another for atmospheric attenuation of sea surface emission due to the mass and temperature of interfering gases.

Maul, G. A.↗

Compressible foam electrode

A foam electrode comprising surface treatment by the steps of: 1) impregnating soft compressible polymeric foams with a conductive coating via sequential infiltration synthesis and 2) functionalizing the chemically altered voids with an ultrathin redox coating to enhance capacitive deionization (CDI). The redox coating will allow treated foam to absorb ions under the application of a bias, and mechanical compression/decompression. The CDI apparatus uses the void volume of the foam in the uncompressed state to flow liquids through it while the compressed state is used to enhance desalination by limiting the diffusion pathways for the ions to find an adsorption surface.

Young, Matthias John↗

Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

A key problem in producing mid-infrared optoelectronic and low-power electronic devices in the GaSb material system is the lack of substrates with appropriate surfaces for epitaxial growth. Chemical mechanical polishing (CMP) of GaSb results in surface damage accompanied by tenacious oxides that do not easily desorb. To overcome this, we have developed a process using gas cluster ion beams (GCIB) to remove surface damage and produce engineered surface oxides. In this paper, we present surface modification results on GaSb substrates using O2-, CF4/O2-, and HBr-GCIB processes. X-ray photoelectron spectroscopy of GCIB produced surface layers showed the presence of mixed Ga- and Sb-oxides, with mostly Ga-oxides at the interface, desorbing at temperatures ranging 530°C to 560°C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that GCIB surfaces yielded smooth defect free substrate to epi transitions as compared to CMP surfaces. Furthermore, HBr-GCIB surfaces exhibited neither dislocation layers nor discernable interfaces, indicating complete oxide desorbtion prior to epigrowth on a clean single crystal template. Atomic force microscopy of GCIB epilayers exhibited smooth surfaces with characteristic step-terrace formations comprising monatomic steps and wide terraces. The HBr-GCIB process can be easily adapted to a large scale manufacturing process for epi-ready GaSb.

36 MATERIALS SCIENCE↗

Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

A key problem in producing mid-infrared optoelectronic and low-power electronic devices in the GaSb material system is the lack of substrates with appropriate surfaces for epitaxial growth. Chemical mechanical polishing (CMP) of GaSb results in surface damage accompanied by tenacious oxides that do not easily desorb. To overcome this, we have developed a process using gas cluster ion beams (GCIB) to remove surface damage and produce engineered surface oxides. In this paper, we present surface modification results on GaSb substrates using O2-, CF4/O2-, and HBr-GCIB processes. X-ray photoelectron spectroscopy of GCIB produced surface layers showed the presence of mixed Ga- and Sb-oxides, with mostly Ga-oxides at the interface, desorbing at temperatures ranging 530°C to 560°C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that GCIB surfaces yielded smooth defect free substrate to epi transitions as compared to CMP surfaces. Furthermore, HBr-GCIB surfaces exhibited neither dislocation layers nor discernable interfaces, indicating complete oxide desorbtion prior to epigrowth on a clean single crystal template. Atomic force microscopy of GCIB epilayers exhibited smooth surfaces with characteristic step-terrace formations comprising monatomic steps and wide terraces. The HBr-GCIB process can be easily adapted to a large scale manufacturing process for epi-ready GaSb.

36 MATERIALS SCIENCE↗

Repairing sealing surfaces on aluminum castings

Approach using stylus nickel plating instead of copper and cadmium plating has simplified repair procedure. Damaged sealing surfaces are stylus nickelplated in one step. Superficial scratches and porous areas are removed more easily from repaired surface by simply lapping sealing areas to required finish. Although method is aimed for aerospace components, it may be easily incorporated into conventional aluminumcasting technology. One-step repair can be considered for cast-aluminum automobile and aircraft engines to reduce time and costs.

Hanna, T. L.↗

Interfacial charge transfer driven by surface termination-controlled Ti 2 C MXene for enhanced hydrogen storage in magnesium

Two-dimensional transition metal carbides and nitrides (MXenes) with layered structure and high conductivity have been effectively utilized in various energy materials, including as a catalytic support of MgH 2 for hydrogen storage. However, the terminal groups formed on the surface during the etching step tend to deactivate reactive Mg metal and add dead mass, thereby deteriorating the catalytic role of MXene in hydrogen sorption of Mg. For this work, we exploited a molten-salt derived MXene with easily modifiable –Cl terminations, compared to conventional –O, –OH and –F groups, and synthesized a composite of Mg and delaminated Ti 2 CCl x MXene to improve the hydrogen storage performance of Mg through charge transfer. This strategy enables the formation of an intimate interface between Mg and MXene, facilitating charge transfer and thereby boosting the catalytic effect. The resulting composite demonstrates significantly enhanced hydrogen sorption kinetics by modulating Mg–H bond strength. This novel approach of modifying surface terminations leverages the unique properties of MXene as a superior support for active materials, offering broader applications in energy materials.

2D material↗

Single-atom Zr promoter boosts oxygen activation on ceria-supported Pt catalysts

Activation of surface lattice oxygen and chemisorbed oxygen on catalyst surfaces constitutes a pivotal step in heterogeneous oxidative catalysis. Herein, we report a strategy for enhancing oxygen activation by rational design of catalysts with single-atom promoters. Single-site Zr species in CeO 2 (Zr 1 -CeO 2 ) are synthesized using the atom-trapping method. The Zr 1 -CeO 2 -supported Pt catalyst exhibits enhanced catalytic performance over the CeO 2 -supported Pt catalyst in the oxidation of CO, C 3 H 8 , and C 3 H 6 , achieving significantly lower T 50 values (temperature required to reach 50% conversion). This enhanced catalytic activity is attributed to the formation of an asymmetric Zr 1 -O-Pt 1 structure, which favors the activation of the adjacent surface lattice oxygen and chemisorbed molecular oxygen. This work exemplifies that incorporating single-site atoms into oxide support facilitates oxygen activation, providing new insights into the role of atomically dispersed promoters in heterogeneous catalysis.

Science & Technology - Other Topics↗

Projections onto the Pareto surface in multicriteria radiation therapy optimization

Purpose: To eliminate or reduce the error to Pareto optimality that arises in Pareto surface navigation when the Pareto surface is approximated by a small number of plans. Methods: The authors propose to project the navigated plan onto the Pareto surface as a postprocessing step to the navigation. The projection attempts to find a Pareto optimal plan that is at least as good as or better than the initial navigated plan with respect to all objective functions. An augmented form of projection is also suggested where dose–volume histogram constraints are used to prevent that the projection causes a violation of some clinical goal. The projections were evaluated with respect to planning for intensity modulated radiation therapy delivered by step-and-shoot and sliding window and spot-scanned intensity modulated proton therapy. Retrospective plans were generated for a prostate and a head and neck case. Results: The projections led to improved dose conformity and better sparing of organs at risk (OARs) for all three delivery techniques and both patient cases. The mean dose to OARs decreased by 3.1 Gy on average for the unconstrained form of the projection and by 2.0 Gy on average when dose–volume histogram constraints were used. No consistent improvements in target homogeneity were observed. Conclusions: There are situations when Pareto navigation leaves room for improvement in OAR sparing and dose conformity, for example, if the approximation of the Pareto surface is coarse or the problem formulation has too permissive constraints. A projection onto the Pareto surface can identify an inaccurate Pareto surface representation and, if necessary, improve the quality of the navigated plan.

60 APPLIED LIFE SCIENCES↗

Gridded Sub-daily Climate Forcings for North America Based on Daymet and GSWP3 (Daymet-GSWP3)

To support high spatial and temporal resolution land surface modeling, this dataset provides 3-hourly time step historic weather forcing at 1-km spatial resolution for the entire North America. The latest Daymet V4 data provides gridded historic daily weather observations at 1-km spatial resolution from 1980 to 2014. Using sub-daily temporal information from the Global Soil Wetness Project Phase 3 (GSWP3), Daymet was further temporally downscaled to 3-hourly time steps and provided in the format required for land surface model simulations. The process of temporal downscaling preserves the relative magnitude in each sub-daily time step from GSWP3 while maintaining the total and average values from Daymet for each day. This results in a blended 1980-2014 Daymet-GSWP3 dataset. Available variables include surface air temperature, precipitation, specific humidity, shortwave and longwave radiation, wind speed, and pressure. These data can be used as a high-resolution meteorological forcing dataset to support high-resolution land surface modeling where accurate meteorological forcing datasets built from historic observations and/or reanalysis datasets are desirable.

54 ENVIRONMENTAL SCIENCES↗

Gridded Sub-daily Climate Forcings for North America Based on Daymet and GSWP3 (Daymet-GSWP3)

To support high spatial and temporal resolution land surface modeling, this dataset provides 3-hourly time step historic weather forcing at 1-km spatial resolution for the entire North America. The latest Daymet V4 data provides gridded historic daily weather observations at 1-km spatial resolution from 1980 to 2014. Using sub-daily temporal information from the Global Soil Wetness Project Phase 3 (GSWP3), Daymet was further temporally downscaled to 3-hourly time steps and provided in the format required for land surface model simulations. The process of temporal downscaling preserves the relative magnitude in each sub-daily time step from GSWP3 while maintaining the total and average values from Daymet for each day. This results in a blended 1980-2014 Daymet-GSWP3 dataset. Available variables include surface air temperature, precipitation, specific humidity, shortwave and longwave radiation, wind speed, and pressure. These data can be used as a high-resolution meteorological forcing dataset to support high-resolution land surface modeling where accurate meteorological forcing datasets built from historic observations and/or reanalysis datasets are desirable.

54 ENVIRONMENTAL SCIENCES↗

Implementing and Evaluating Variable Soil Thickness in the Community Land Model, Version 4.5 (CLM4.5)

One of the recognized weaknesses of land surface models as used in weather and climate models is the assumption of constant soil thickness because of the lack of global estimates of bedrock depth. As such, using a 30-arc-s global dataset for the thickness of relatively porous, unconsolidated sediments over bedrock, spatial variation in soil thickness is included here in version 4.5 of the Community Land Model (CLM4.5). The number of soil layers for each grid cell is determined from the average soil depth for each 0.9° latitude × 1.25° longitude grid cell. The greatest changes in the simulation with variable soil thickness are to baseflow, with the annual minimum generally occurring earlier. Smaller changes are seen in latent heat flux and surface runoff primarily as a result of an increase in the annual cycle amplitude. These changes are related to soil moisture changes that are most substantial in locations with shallow bedrock. Total water storage (TWS) anomalies are not strongly affected over most river basins since most basins contain mostly deep soils, but TWS anomalies are substantially different for a river basin with more mountainous terrain. Additionally, the annual cycle in soil temperature is partially affected by including realistic soil thicknesses resulting from changes in the vertical profile of heat capacity and thermal conductivity. However, the largest changes to soil temperature are introduced by the soil moisture changes in the variable soil thickness simulation. This implementation of variable soil thickness represents a step forward in land surface model development.

54 ENVIRONMENTAL SCIENCES↗

Strategies Toward Automation of Overset Structured Surface Grid Generation

An outline of a strategy for automation of overset structured surface grid generation on complex geometries is described. The starting point of the process consists of an unstructured surface triangulation representation of the geometry derived from a native CAD, STEP, or IGES definition, and a set of discretized surface curves that captures all geometric features of interest. The procedure for surface grid generation is decomposed into an algebraic meshing step, a hyperbolic meshing step, and a gap-filling step. This paper will focus primarily on the high-level plan with details on the algebraic step. The algorithmic procedure for the algebraic step involves analyzing the topology of the network of surface curves, distributing grid points appropriately on these curves, identifying domains bounded by four curves that can be meshed algebraically, concatenating the resulting grids into fewer patches, and extending appropriate boundaries of the concatenated grids to provide proper overlap. Results are presented for grids created on various aerospace vehicle components.

overset↗

NASA's Artemis Human Landing Systems

The Human Landing System (HLS) is the mode of transportation that will take astronauts to the lunar surface in NASA's Artemis lunar exploration program. On early missions, the astronauts will live inside the pressurized crew cabin portion of the lander for up to a week. The HLS program, based at Marshall Space Flight Center in Huntsville, Alabama, is working closely with commercial partners to build innovative and technically advanced lunar landers, leveraging decades of human spaceflight experience and the speed of the commercial sector. In addition to the NextSTEP-2 Broad Agency Announcement Appendix H Option A contract that includes one uncrewed and one crewed demonstration mission to the lunar surface, the HLS program is taking steps to establish a regular cadence of crewed missions to the surface of the Moon. This paper will discuss the HLS program’s latest development activities.

Lisa Watson-Morgan↗

NASA’s Artemis Human Landing Systems

The Human Landing System (HLS) is the mode of transportation that will take astronauts to the lunar surface in NASA's Artemis lunar exploration program. On early missions, the astronauts will live inside the pressurized crew cabin portion of the lander for up to a week. The HLS program, based at NASA’s Marshall Space Flight Center in Huntsville, Alabama, is working closely with commercial partners to build innovative and technically advanced lunar landers, leveraging decades of human spaceflight experience and the speed of the commercial sector. In addition to the NextSTEP-2 Broad Agency Announcement Appendix H Option A contract that includes one uncrewed and one crewed demonstration mission to the lunar surface, the HLS program is taking steps to establish a regular cadence of crewed missions to the surface of the Moon. This paper will discuss the HLS program’s latest development activities.

Lisa Watson-Morgan↗

Combining Laser Ablation/Liquid Phase Collection Surface Sampling and High-Performance Liquid Chromatography Electrospray Ionization Mass Spectrometry

This paper describes the coupling of ambient pressure transmission geometry laser ablation with a liquid phase sample collection method for surface sampling and ionization with subsequent mass spectral analysis. A commercially available autosampler was adapted to produce a liquid droplet at the end of the syringe injection needle while in close proximity to the surface to collect the sample plume produced by laser ablation. The sample collection was followed by either flow injection or a high performance liquid chromatography (HPLC) separation of the extracted components and detection with electrospray ionization mass spectrometry (ESI-MS). To illustrate the analytical utility of this coupling, thin films of a commercial ink sample containing rhodamine 6G and of mixed isobaric rhodamine B and 6G dyes on glass microscope slides were analyzed. The flow injection and HPLC/ESI-MS analysis revealed successful laser ablation, capture and, with HPLC, the separation of the two compounds. The ablated circular area was about 70 m in diameter for these experiments. The spatial sampling resolution afforded by the laser ablation, as well as the ability to use sample processing methods like HPLC between the sample collection and ionization steps, makes this combined surface sampling/ionization technique a highly versatile analytical tool.

Laser Ablation↗