Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Cations Enhance Hydride Transfer to Noncatalytic Metals in Concentrated Alkaline Electrolytes

Alkali metal cations are known to influence the kinetics of the hydrogen evolution reaction (HER), acting as either promoters or inhibitors to the rate-determining step depending on the metal surface, local pH, and cation concentration. Despite the importance of concentrated electrolytes for commercial electrochemical cells, the impact of cations on the HER in concentrated alkaline environments (>1 M) and in mixed cation systems remains poorly understood. Here, this study quantifies the HER kinetics at polycrystalline metal surfaces (Pt, Au, Cu, and Fe) and the equilibrium solvation environment in pure and mixed alkali metal hydroxide electrolytes at concentrations up to 3.0 M. Kinetic analyses of Au, Cu, and Fe revealed a positive cation-concentration-effect that was primarily driven by changes to the charge transfer coefficient. Multinuclear NMR spectroscopy examined the solvation of H 2 O/OH – species and the alkali cations as a function of (mixed) alkali cation concentration(s), and demonstrated rapid exchange between solvent, hydroxide, and solvated cations. Together, these findings support models where HER kinetics on noncatalytic metal surfaces in strongly alkaline conditions are primarily governed by the average polarization and polarizability of the metal/solution interface and that increasing cation activity continues to increase the transfer coefficient at metal-hydroxide concentrations up to 3.0 M. Electrolytes and additives which can outcompete weakly hydrated cations and disrupt the interfacial water structure are expected to suppress parasitic HER at electrodes for energy storage and electroplating.

Cations↗

Multiscale Morphology of Nanoporous Copper Made from Intermetallic Phases

Many application-relevant properties of nanoporous metals critically depend on their multiscale architecture. For example, the intrinsically high step-edge density of curved surfaces at the nanoscale provides highly reactive sites for catalysis, whereas the macroscale pore and grain morphology determines the macroscopic properties, such as mass transport, electrical conductivity, or mechanical properties. Here, in this work, we systematically study the effects of alloy composition and dealloying conditions on the multiscale morphology of nanoporous copper (np-Cu) made from various commercial Zn–Cu precursor alloys. Using a combination of X-ray diffraction, electron backscatter diffraction, and focused ion beam cross-sectional analysis, our results reveal that the macroscopic grain structure of the starting alloy surprisingly survives the dealloying process, despite a change in crystal structure from body-centered cubic (Zn–Cu starting alloy) to face-centered cubic (Cu). The nanoscale structure can be controlled by the acid used for dealloying with HCl leading to a larger and more faceted ligament morphology compared to that of H 3 PO 4 . Finally, anhydrous ethanol dehydrogenation was used as a probe reaction to test the effect of the nanoscale ligament morphology on the apparent activation energy of the reaction.

36 MATERIALS SCIENCE↗

Growth Rate of Calcite Steps as a Function of Aqueous Calcium-to-Carbonate Ratio: Independent Attachment and Detachment of Calcium and Carbonate Ions

Growth rates of monolayer-height steps on the {1014} calcite surface have been measured as a function of the aqueous calcium-to-carbonate ratio. The maximum growth rates of the two common crystallographic orientations were found to deviate from the ideal stoichiometric ratio of 1:1, and dissolution features were observed under supersaturated solutions containing high calcium-to-carbonate ratios. To explain these phenomena, a theory is applied that treats the rates of attachment and detachment of aqueous calcium and carbonate ions separately. The resultant attachment rate constants are 1-3 orders of magnitude smaller than the water exchange rate of the constituent aqueous ions, suggesting that ligand-exchange processes may directly drive attachment. The broader implication is that the saturation state alone is not adequate to fully describe the rates of the multiple, independent reactions that occur on mineral surfaces under these conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of syngas hydrogenation to methanol on the polar Zn-terminated ZnO(0001) surface

Methanol synthesis from syngas (CO/CO2/H2) hydrogenation on the perfect Zn–terminated polar ZnO(0001) surface have been investigated using periodic density functional theory calculations. Our results show that direct CO2 hydrogenation to methanol on the perfect ZnO(0001) surface is unlikely because in the presence of surface atomic H and O the highly stable formate (HCOO) and carbonate (CO3) readily produced from CO2 with low barriers 0.11 and 0.09 eV will eventually accumulate and block the active sites of the ZnO(0001) surface. In contrast, methanol synthesis from CO hydrogenation is thermodynamically and kinetically feasible on the perfect ZnO(0001) surface. CO can be consecutively hydrogenated into formyl (HCO), formaldehyde (H2CO), methoxy (H3CO) intermediates, leading to the final formation of methanol (H3COH). The reaction route via hydroxymethyl (H2COH) intermediate, a previously proposed species on the defected O–terminated ZnO( ) surface, is kinetically inhibited on the perfect ZnO(0001) surface. The rate-determining step in the consecutive CO hydrogenation route is the hydrogenation of H3CO to H3COH. We also note that this last hydrogenation step is pronouncedly facilitated in the presence of water by lowering the activation barrier from 1.02 to 0.55 eV. This work was supported by the U.S. Department of Energy Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences and Geosciences, and performed at EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at Pacific Northwest National Laboratory (PNNL). Computational resources were provided at EMSL and the National Energy Research Scientific Computing Center at Lawrence Berkeley National Laboratory. J. Li and Y.-F. Zhao were also financially supported by the National Natural Science Foundation of China (Nos. 20933003 and 91026003) and the National Basic Research Program of China (No. 2011CB932400). Y.-F. Zhao acknowledges the fellowship from PNNL.

10 SYNTHETIC FUELS↗

Formation of carbon–nitrogen bonds in carbon monoxide electrolysis

The electroreduction of CO 2 is a promising technology for carbon utilization. Although electrolysis of CO 2 or CO 2 -derived CO can generate important industrial multicarbon feedstocks such as ethylene, ethanol, n-propanol and acetate, most efforts have been devoted to promoting C–C bond formation. Here, we demonstrate that C–N bonds can be formed through co-electrolysis of CO and NH 3 with acetamide selectivity of nearly 40% at industrially relevant reaction rates. Full-solvent quantum mechanical calculations show that acetamide forms through nucleophilic addition of NH 3 to a surface-bound ketene intermediate, a step that is in competition with OH – addition, which leads to acetate. Here, the C–N formation mechanism was successfully extended to a series of amide products through amine nucleophilic attack on the ketene intermediate. This strategy enables us to form carbon–heteroatom bonds through the electroreduction of CO, expanding the scope of products available from CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO oxidation over ruthenium: identification of the catalytically active phases at near-atmospheric pressures

CO oxidation was carried out over Ru(0001) and RuO2(110) thin film grown on Ru(0001) at various O2/CO ratios near atmospheric pressures. Reaction kinetics, coupled with in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) and post-reaction Auger electron spectroscopy (AES) measurements were used to identify the catalytically relevant phases at different reaction conditions. Under stoichiometric and reducing conditions at all reaction temperatures, as well as net-oxidizing reaction conditions below {approx}475 K, a reduced metallic phase with chemisorbed oxygen is the thermodynamically stable and catalytically active phase. On this surface CO oxidation occurs at surface defect sites, for example step edges. Only at net-oxidizing reaction conditions and above {approx}475 K is the RuO2 thin film grown on metallic Ru stable and active. However, RuO2 is not active itself without the existence of the metal substrate, suggesting the importance of a strong metal-substrate interaction (SMSI).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics study on low-energy sputtering properties of MgO surfaces

In an effort to understand microscopic processes occurring between MgO protective layers and impinging plasma ions in a discharge cell of plasma-display panel, sputtering properties of MgO(100) surface by He, Ne, and Xe atoms are studied with molecular dynamics simulations. Interatomic potentials between constituent atoms are fitted to first-principles data sets for representative configurations. Various incident directions of ions are considered with kinetic energies under 100 eV. It is found that sputtering yields for the Ne atom are largest among tested noble gases. The angle dependence of sputtering yields indicates that (111)-oriented MgO films are much more vulnerable to ion attacks than (100)-oriented layers. A surface model including the monolayer step is also studied and it is found that the yields increase substantially for grazing-angle incidence.

36 MATERIALS SCIENCE↗

UNIPIC code for simulations of high power microwave devices

In this paper, UNIPIC code, a new member in the family of fully electromagnetic particle-in-cell (PIC) codes for simulations of high power microwave (HPM) generation, is introduced. In the UNIPIC code, the electromagnetic fields are updated using the second-order, finite-difference time-domain (FDTD) method, and the particles are moved using the relativistic Newton-Lorentz force equation. The convolutional perfectly matched layer method is used to truncate the open boundaries of HPM devices. To model curved surfaces and avoid the time step reduction in the conformal-path FDTD method, CP weakly conditional-stable FDTD (WCS FDTD) method which combines the WCS FDTD and CP-FDTD methods, is implemented. UNIPIC is two-and-a-half dimensional, is written in the object-oriented C++ language, and can be run on a variety of platforms including WINDOWS, LINUX, and UNIX. Users can use the graphical user's interface to create the geometric structures of the simulated HPM devices, or input the old structures created before. Numerical experiments on some typical HPM devices by using the UNIPIC code are given. The results are compared to those obtained from some well-known PIC codes, which agree well with each other.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct formation of InAs quantum dots grown on InP (001) by solid-source molecular beam epitaxy

We have developed a growth process that leads to the direct formation of self-assembled InAs quantum dots on InP(001) by solid-source molecular beam epitaxy avoiding the previous formation of quantum wires usually obtained by this technique. The process consists of a periodically alternated deposition of In and As correlated with InAs(4x2){r_reversible}(2x4) surface reconstruction changes. Based on the results obtained by in situ characterization techniques, we propose that the quantum dots formation is possible due to the nucleation of In droplets over the InAs(4x2) surface during the In deposition step and their subsequent crystallization under the As step.

36 MATERIALS SCIENCE↗

Vibrational optical activity of chiral carbon nanoclusters treated by a generalized π-electron method

Cross sections of inelastic light scattering accompanied by vibronic excitation in large conjugated carbon structures is assessed at the π-electron level. Intensities of Raman and vibrational Raman optical activity (VROA) spectra of fullerenes are computed, relying on a single electron per atom. When considering only first neighbor terms in the Hamiltonian (a tight-binding (TB) type or Hückel-model), Raman intensities are captured remarkably well, based on comparison with frequency-dependent linear response of the self-consistent field (SCF) method. Resorting to π-electron levels when computing spectral intensities brings a beneficial reduction in computational cost as compared to linear response SCF. At difference with total intensities, the first neighbor TB model is found inadequate for giving the left and right circularly polarized components of the scattered light, especially when the molecular surface is highly curved. To step beyond first neighbor approximation, an effective π-electron Hamiltonian, including interaction of all sites is derived from the all-electron Fockian, in the spirit of the Bloch-equation. Chiroptical cross-sections computed by this novel π-electron method improve upon first-neighbor TB considerably, with no increase in computational cost. Computed VROA spectra of chiral fullerenes, such as C{sub 76} and C{sub 28}, are reported for the first time, both by conventional linear response SCF and effective π-electron models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualization of defects in single-crystal and thin-film PdCoO 2 using aberration-corrected scanning transmission electron microscopy

Single-crystal delafossite PdCoO 2 is known to have an extremely low intrinsic impurity concentration of ~0.001%, demonstrating extraordinarily high conductivity with a mean free path of ~20 μm at low temperatures. However, when grown as thin films, the resistivity at room temperature increases by a factor of 3–80 times, depending on the film thickness. Using scanning transmission electron microscopy, we identify different classes of defects for the single crystal vs epitaxial thin film. The dominant defect for single-crystal PdCoO 2 is found to be ribbonlike defects. For the thin films, we identify different types of defects arising in epitaxial thin films mainly due to substrate termination that disrupt the lateral connectivity of the conducting planes. Further, our results are consistent with the high conductivity of single crystals and increased electrical resistivity of the thin films compared to that of single crystals, suggesting that selecting a proper substrate, improving surface quality, and reducing the step density are the keys to enhance the film quality for utilizing PdCoO 2 as a platform for future applications.

36 MATERIALS SCIENCE↗

High active nitrogen flux growth of GaN by plasma assisted molecular beam epitaxy

In the present study, the authors report on a modified Riber radio frequency (RF) nitrogen plasma source that provides active nitrogen fluxes more than 30 times higher than those commonly used for plasma assisted molecular beam epitaxy (PAMBE) growth of gallium nitride (GaN) and thus a significantly higher growth rate than has been previously reported. GaN films were grown using N{sub 2} gas flow rates between 5 and 25 sccm while varying the plasma source's RF forward power from 200 to 600 W. The highest growth rate, and therefore the highest active nitrogen flux, achieved was ∼7.6 μm/h. For optimized growth conditions, the surfaces displayed a clear step-terrace structure with an average RMS roughness (3 × 3 μm) on the order of 1 nm. Secondary ion mass spectroscopy impurity analysis demonstrates oxygen and hydrogen incorporation of 1 × 10{sup 16} and ∼5 × 10{sup 17}, respectively. In addition, the authors have achieved PAMBE growth of GaN at a substrate temperature more than 150 °C greater than our standard Ga rich GaN growth regime and ∼100 °C greater than any previously reported PAMBE growth of GaN. This growth temperature corresponds to GaN decomposition in vacuum of more than 20 nm/min; a regime previously unattainable with conventional nitrogen plasma sources. Arrhenius analysis of the decomposition rate shows that samples with a flux ratio below stoichiometry have an activation energy greater than decomposition of GaN in vacuum while samples grown at or above stoichiometry have decreased activation energy. The activation energy of decomposition for GaN in vacuum was previously determined to be ∼3.1 eV. For a Ga/N flux ratio of ∼1.5, this activation energy was found to be ∼2.8 eV, while for a Ga/N flux ratio of ∼0.5, it was found to be ∼7.9 eV.

36 MATERIALS SCIENCE↗

Superconducting Nd 1- x Eu x NiO 2 thin films using in situ synthesis

We report on superconductivity in Nd 1-x Eu x NiO 2 using Eu as a 4f dopant of the parent NdNiO 2 infinite-layer compound. We use an all–in situ molecular beam epitaxy reduction process to achieve the superconducting phase, providing an alternate method to the ex situ CaH 2 reduction process to induce superconductivity in the infinite-layer nickelates. The Nd 1-x Eu x NiO 2 samples exhibit a step-terrace structure on their surfaces, have a T c onset of 21 K at x = 0.25, and have a large upper critical field that may be related to Eu 4f doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical Behaviors of Fe75Mo5P10C7.5B2.5 Bulk Metallic Glass under Torsional Loadings

Pure- and cyclic-torsional studies were conducted on a Fe{sub 75}Mo{sub 5}P{sub 10}C{sub 7.5}B{sub 2.5} (atomic percent, at.%) bulk-metallic glass at room temperature for an understanding of its damage and fracture mechanisms. Under pure-torsional loading, the metallic glass exhibited very little plastic strain before fracture. The fracture initiated along the maximum tensile-stress plane, which is about 45{sup o} to the axial direction. The shear-fracture strength ({approx}510 MPa) is much lower than the compressive-fracture strength ({approx}3280 MPa), which suggests that different deformation mechanisms be present under various loading modes. Instead of an apparent vein-type structure, the fracture morphologies revealed a crack-initiation site, a mirror region, a mist region, and a hackle region. Under cyclic-torsional loading, fatigue cracks initiated from casting defects, and propagate generally along the maximum tensile-stress plane. A slight cyclic-hardening behavior was observed in initial loading steps. The fatigue-fracture surface consists of three main regions: the fatigue crack-initiation, crack-propagation, and final-fast-fracture areas. The striations resulting from the blunting and re-sharpening of the fatigue crack tip were observed in the crack-propagation region. Based on these results, the damage and fracture mechanisms of the metallic glass induced by torsional loadings are elucidated.

36 MATERIALS SCIENCE↗

Methods for both coating a substrate with aluminum oxide and infusing the substrate with elemental aluminum

Methods of aluminizing the surface of a metal substrate. The methods of the present invention do not require establishment of a vacuum or a reducing atmosphere, as is typically necessary. Accordingly, aluminization can occur in the presence of oxygen, which greatly simplifies and reduces processing costs by allowing deposition of the aluminum coating to be performed, for example, in air. Embodiments of the present invention can be characterized by applying a slurry that includes a binder and powder granules containing aluminum to the metal substrate surface. Then, in a combined step, a portion of the aluminum is diffused into the substrate and a portion of the aluminum is oxidized by heating the slurry to a temperature greater than the melting point of the aluminum in an oxygen-containing atmosphere.

36 MATERIALS SCIENCE↗

Localized atmospheric laser chemical vapor deposition

An atmospheric, Laser-based Chemical Vapor Deposition (LCVD) technique provides highly localized deposition of material to mitigate damage sites on an optical component. The same laser beam can be used to deposit material as well as for in-situ annealing of the deposited material. The net result of the LCVD process is in-filling and planarization of a treated site, which produces optically more damage resistant surfaces. Several deposition and annealing steps can be interleaved during a single cycle for more precise control on amount of deposited material as well as for increasing the damage threshold for the deposited material.

36 MATERIALS SCIENCE↗

Process and catalyst for production of mixed alcohols from synthesis gas

A preferred embodiment of the process involves a generate a catalyst that comprises molybdenum carbide nickel material. Steps may involve heating a surface that comprises molybdenum oxide and a nickel salt while passing thereover a gaseous mixture that comprises a reductant and a carburizer. In certain embodiments, the reductant and the carburizer may both be carbon monoxide, or both be a saturated hydrocarbon. In others, the reductant may be carbon monoxide and the carburizer may be a saturated hydrocarbon.

Sethi, Vijay K.↗

Visual, Optical and Replica Inspections: Surface Preparation of 650 MHz NB Cavity for PIP-II Linac

Surface preparation of niobium superconducting RF cavities is a critical step for achieving good RF performance under the superconducting state. Surface defect, roughness, and contamination affect the accelerating gradient and quality factor of the cavities. We report surface inspection methods used to control the surface processing of 650 MHz cavities designated for the pre-production and prototype cryomodules for PIP-II linac. The cavity surface was routinely inspected visually, with an optical camera, and by microscopic scanning of surface replicas. This article covers details on the surface inspection methods and surface polishing process used to repair the surface.

43 PARTICLE ACCELERATORS↗