Search NASA⌕ Search

SEARCH · Search NASA

Results for “time resolution data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Feasibility of Using Fourier Neural Operators for 3D Elastic Seismic Simulations

Seismic simulations in three-dimensional (3D) Earth models are important in many of the seismological applications related to our lab’s mission, however, accurate high-fidelity simulations are computationally costly. We investigated the capabilities of the newly developed Fourier Neural Operator (FNO) to solve the 3D elastic wave equations for seismic simulations. We generated simulation data for training the FNO model, and analyzed its performance on various test cases, such as the performance with different number of training data, different resolutions, and on more canonical structures. We found the FNO model can reproduce 3D seismic simulations with high accuracy and ~169 times faster on a small spatial grid size of 16 x 16 x16. When applied on higher resolution data, we found that transfer learning with fine-tuning on a small amount of data achieves reasonable results. This feasibility study showed promising results for using FNO’s for 3D seismic simulations and represents the foundation of further research to develop this into a more mature approach for different seismological applications. The potential impact of this project will provide techniques for large-scale or real-time applications of solving PEDs in support of national lab’s programs.

58 GEOSCIENCES↗

Time-resolved pump-probe experiments beyond the jitter limitations at FLASH

Using a noninvasive, electro-optically based electron bunch arrival time measurement at FLASH (free electron laser in Hamburg) the temporal resolution of two-color pump-probe experiments has been significantly improved. The system determines the relative arrival time of the extended ultraviolet pulse of FLASH and an amplified Ti:sapphire femtosecond-laser pulse at the interaction region better than 90 fs rms. In a benchmarking pump-probe experiment using two-color above threshold ionization of noble gases, an enhancement in the timing resolution by a factor of 4 compared to the uncorrected data is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Capturing Ring Opening in Photoexcited Enolic Acetylacetone upon Hydrogen Bond Dissociation by Ultrafast Electron Diffraction

Photoinduced biological and chemical reactions are often based on key structural transformations of a molecule driven across multiple electronic states. Acetylacetone (AcAc) is a prototypical system for complex chemical pathways involving several conical intersections (CI) and singlet–triplet intersystem crossings (ISC) characterized by distinct geometries. In the gas phase, AcAc is predominantly in a planar ring-like enolic form stabilized by a strong intramolecular O–H···O hydrogen bond. Following excitation into the S 2 (ππ*) state at 266 nm, acetylacetone undergoes rapid internal conversion followed by intersystem crossing. Such relaxation pathways are associated with structural changes including ring opening, deplanarization, and bond elongation. In this work, ultrafast electron diffraction (UED) at the SLAC MeV-UED setup is employed as a direct structural probe with a time resolution of 160 fs. Together with trajectory surface hopping simulations, analysis of the UED data provides a new perspective on the early time nuclear dynamics in acetylacetone. Specifically, AcAc is observed to undergo ring opening, deplanarization, and bond elongation all within the first 700 fs after photoexcitation. The monitored dynamics is associated mainly with the nuclear motion on the S 1 potential energy surface, formed after very rapid transfer from S 2 to S 1 , allowing AcAc to reach the conical intersection to intersystem crossing. Such time scales of nuclear motion are contrasted with the time scales of electronic transitions in AcAc that were previously characterized with spectroscopic methods, specifically internal conversion (<100 fs) and intersystem crossing (∼1.5 ps).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic particle activity at 5-min and 10-s time resolution in the magnetotail and its relation to auroral activity

The paper examines several energetic particle bursts associated with substorm events in the magnetotail using data from the Imp 7 and 8 spacecraft experiments. Individual proton and electron bursts observed by the spacecraft do not always coincide nor does magnetotail activity correlate strongly with auroral activity on time scales less than 1 hr. The pitch angle distributions were determined with a time resolution of 10 s by combining magnetic field and particle measurements on Imp 8; during intense particle bursts the 0.3-MeV protons exhibit unidirectional or bidirectional anisotropies along the magnetic field. The data suggest the presence of small localized acceleration regions in the magnetotail observable when magnetically connected to the spacecraft; little evidence is found for a single neutral line extending across the width of the magnetotail.

Carbary, J. F.↗

Calorimeter calibration and performance for the Mu2e experiment

The Mu2e experiment at Fermilab will search for the charged lepton flavour-violating conversion of a muon into an electron, aiming to reach a sensitivity of $R_{\mu e} \sim 10^{-17}$, an improvement of four orders of magnitude over previous limits. To reach this goal, Mu2e will use an intense pulsed muon beam and a detector system composed of a high-precision straw tube tracker and a pure CsI crystal calorimeter. The calorimeter plays a crucial role in the experiment, as it provides particle identification capabilities that are necessary for background suppression. To perform its tasks, the detector must achieve an energy resolution better than 10% and a timing resolution below 500 ps for 100 MeV electrons. Cosmic-ray data and laser pulses are used to equalize the response of each channel, to calibrate the energy scale and to monitor the system's stability over time. This poster reports on the calibration and analysis techniques developed to ensure that the calorimeter requirements for precise energy and time measurements are met. Results for the calorimeter performance obtained during the commissioning phase will be discussed, and an overview of the current status in the Mu2e experimental hall will be presented.

Salamino, Sabrina [Frascati]↗

The Magnetospheric Multiscale Magnetometers

The success of the Magnetospheric Multiscale mission depends on the accurate measurement of the magnetic field on all four spacecraft. To ensure this success, two independently designed and built fluxgate magnetometers were developed, avoiding single-point failures. The magnetometers were dubbed the digital fluxgate (DFG), which uses an ASIC implementation and was supplied by the Space Research Institute of the Austrian Academy of Sciences and the analogue magnetometer (AFG) with a more traditional circuit board design supplied by the University of California, Los Angeles. A stringent magnetic cleanliness program was executed under the supervision of the Johns Hopkins University,s Applied Physics Laboratory. To achieve mission objectives, the calibration determined on the ground will be refined in space to ensure all eight magnetometers are precisely inter-calibrated. Near real-time data plays a key role in the transmission of high-resolution observations stored onboard so rapid processing of the low-resolution data is required. This article describes these instruments, the magnetic cleanliness program, and the instrument pre-launch calibrations, the planned in-flight calibration program, and the information flow that provides the data on the rapid time scale needed for mission success.

Magnetosphere↗

Satellite Data Product and Data Dissemination Updates for the SPoRT Sea Surface Temperature Composite Product

The SPoRT SST composite is a reliable and robust high-resolution product generated twice per day in near real time. It incorporates highest quality data satellite data from infrared imagers and global analysis from NESDIS and UKMO. Recent updates to the product include the inclusion of VIIRS data to extend the life of the product beyond the MODIS era. It is used by a number of users in their DSS.

sea surface temperature↗

WebGIobe - A cloud-based geospatial analysis framework for interacting with climate data

While climate models have evolved over time to produce high fidelity and high resolution climate forecasts, visualization and analysis of the output of the model simulations has been limited, typically constrained to single dimensional charts for visualization and basic aggregate statistics for analytics. Same is true for the large troves of observational data available from meteorological stations all over the world. For richer understanding of climate and the impact of climate change, one needs computational tools that allow researchers, policymakers, and general public, to interact with the climate data. In this paper, we describe, webGlobe, a browser based GIS framework for interacting with climate data, and other datasets available in similar format. webGlobe is a unique resource that allows unprecedented access to climate data through a browser. The framework also allows for deploying machine learning based analytical applications on the climate data without putting computational burden on the client. Instead, webGlobe uses a client-server framework, where the server, deployed on a cloud infrastructure, allows for dynamic allocation of resources for running compute-intensive applications. The capabilities of the framework will be discussed in context of a use case: identifying extreme events from real and simulated climate data using a Gaussian process based change detection algorithm.

Sharma, Arun↗

Equivalent source modeling of the main field using MAGSAT data

The software was considerably enhanced to accommodate a more comprehensive examination of data available for field modeling using the equivalent sources method by (1) implementing a dynamic core allocation capability into the software system for the automatic dimensioning of the normal matrix; (2) implementing a time dependent model for the dipoles; (3) incorporating the capability to input specialized data formats in a fashion similar to models in spherical harmonics; and (4) implementing the optional ability to simultaneously estimate observatory anomaly biases where annual means data is utilized. The time dependence capability was demonstrated by estimating a component model of 21 deg resolution using the 14 day MAGSAT data set of Goddard's MGST (12/80). The equivalent source model reproduced both the constant and the secular variation found in MGST (12/80).

Source record↗

A grouped binary time code for telemetry and space applications

A computer oriented time code designed for users with various time resolution requirements is presented. It is intended as a time code for spacecraft and ground applications where direct code compatibility with automatic data processing equipment is of primary consideration. The principal features of this time code are: byte oriented format, selectable resolution options (from seconds to nanoseconds); and long ambiguity period. The time code is compatible with the new data handling and management concepts such as the NASA End-to-End Data System and the Telemetry Data Packetization format.

Chi, A. R.↗

Demonstration of an AI-driven workflow for autonomous high-resolution scanning microscopy

Abstract Modern scanning microscopes can image materials with up to sub-atomic spatial and sub-picosecond time resolutions, but these capabilities come with large volumes of data, which can be difficult to store and analyze. We report the Fast Autonomous Scanning Toolkit (FAST) that addresses this challenge by combining a neural network, route optimization, and efficient hardware controls to enable a self-driving experiment that actively identifies and measures a sparse but representative data subset in lieu of the full dataset. FAST requires no prior information about the sample, is computationally efficient, and uses generic hardware controls with minimal experiment-specific wrapping. We test FAST in simulations and a dark-field X-ray microscopy experiment of a WSe 2 film. Our studies show that a FAST scan of <25% is sufficient to accurately image and analyze the sample. FAST is easy to adapt for any scanning microscope; its broad adoption will empower general multi-level studies of materials evolution with respect to time, temperature, or other parameters.

47 OTHER INSTRUMENTATION↗

On the interpretation of observed data from C-dE/dx detectors

The paper describes a Cerenkov detector system designed to obtain abundances and energy spectra of cosmic ray nuclei above charge 12 and above 350 MeV/nucleon. The detector system consists of three pulse ionization chambers, a Lucite Cerenkov counter and a plastic scintillation-counter hodoscope. The data analysis follows from the standard dE/dx-C technique. It is shown that by using the relativistic ionization rise, the resolution and pulse height corresponding to charged particles of Beta ? 1 in Cerenkov detectors can be determined. Least-squares-fit procedures are used to obtain area and time variations of detector response from flight data and to extract elemental abundances from data with charge resolution of roughly 0.3 charge units.

Benegas, J. C.↗

Reconciling Satellite-Derived Atmospheric Properties with Fine-Resolution Land Imagery: Insights for Atmospheric Correction

This paper investigates to what extent satellite measurements of atmospheric properties can be reconciled with fine-resolution land imagery, in order to improve the estimates of surface reflectance through physically based atmospheric correction. The analysis deals with mountainous area (Landsat scene of Peruvian Amazon/Andes, 72 E and 13 S), where the atmosphere is highly variable. Data from satellite sensors were used for characterization of the key atmospheric constituents: total water vapor (TWV), aerosol optical depth (AOD), and total ozone. Constituent time series revealed the season-dependent mean state of the atmosphere and its variability. Discrepancies between AOD from the Advanced Along-Track Scanning Radiometer (AATSR) and Moderate Resolution Imaging Spectroradiometer (MODIS) highlighted substantial uncertainty of atmospheric aerosol properties. The distribution of TWV and AOD over a Landsat scene was found to be exponentially related to ground elevation (mean R(sup 2) of 0.82 and 0.29, respectively). In consequence, the atmosphere-induced and seasonally varying bias of the top-of-atmosphere signal was also elevation dependent (e.g., mean Normalized Difference Vegetation Index bias at 500 m was 0.06 and at 4000 m was 0.01). We demonstrate that satellite measurements of key atmospheric constituents can be downscaled and gap filled with the proposed "background + anomalies" approach, to allow for a better compatibility with fine-resolution land surface imagery. Older images (i.e., predating the MODIS/ATSR era), without coincident atmospheric data, can be corrected using climatologies derived from time series of satellite retrievals. Averaging such climatologies over space compromises the quality of correction result to a much greater degree than averaging them over time. We conclude that the quality of both recent and older fine-resolution land surface imagery can be improved with satellite-based atmospheric data acquired to date.

Zelazowski, Przemyslaw↗

Streamline-Based Time-Lapse-Seismic-Data Integration Incorporating Pressure and Saturation Effects

In this paper, we present an efficient history-matching technique that simultaneously integrates 4D repeat seismic surveys with well-production data. This approach is particularly well-suited for the calibration of the reservoir properties of high-resolution geologic models because the seismic data are a really dense but sparse in time, whereas the production data are finely sampled in time but spatially averaged. The joint history matching is performed by use of streamline-based sensitivities derived from either finite-difference or streamline-based flow simulation. For the most part, earlier approaches have focused on the role of saturation changes, but the effects of pressure have largely been ignored. Here, we present a streamline-based semianalytic approach for computing model-parameter sensitivities, accounting for both pressure and saturation effects. The novelty of the method lies in the semianalytic sensitivity computations, making it computationally efficient for high-resolution geologic models. The approach is implemented by use of a finite-difference simulator incorporating the detailed physics. Its efficacy is demonstrated by use of both synthetic and field applications. Lastly, for both the synthetic and the field cases, the advantages of incorporating the time-lapse variations are clear, seen through the improved estimation of the permeability distribution, the pressure profile, the evolution of the fluid saturation, and the swept volumes.

58 GEOSCIENCES↗

Satellite-Based View of the Aerosol Spatial and Temporal Variability in the Cordoba Region (Argentina) Using over Ten Years of High-Resolution Data

Space-based observations offer a unique opportunity to investigate the atmosphere and its changes over decadal time scales, particularly in regions lacking in situ and/or ground based observations. In this study, we investigate temporal and spatial variability of atmospheric particulate matter (aerosol) over the urban area of Córdoba (central Argentina) using over ten years (2003–2015) of high-resolution (1 km) satellite-based retrievals of aerosol optical depth (AOD). This fine resolution is achieved exploiting the capabilities of a recently developed inversion algorithm (Multiangle implementation of atmospheric correction, MAIAC) applied to the MODIS sensor datasets of the NASA-Terra and -Aqua platforms. Results of this investigation show a clear seasonality of AOD over the investigated area. This is found to be shaped by an intricate superposition of aerosol sources, acting over different spatial scales and affecting the region with different yearly cycles. During late winter and spring (August-October), local as well as near- and long-range transported biomass burning (BB) aerosols enhance the Córdoba aerosol load, and AOD levels reach their maximum values (>0.35 at 0.47 µm). The fine AOD spatial resolution allowed to disclose that, in this period, AOD maxima are found in the rural/agricultural area around the city, reaching up to the city boundaries pinpointing that fires of local and near-range origin play a major role in the AOD enhancement. A reverse spatial AOD gradient is found from December to March, the urban area showing AODs 40–80% higher than in the city surroundings. In fact, during summer, the columnar aerosol load over the Córdoba region is dominated by local (urban and industrial) sources, likely coupled to secondary processes driven by enhanced radiation and mixing effects within a deeper planetary boundary layer (PBL). With the support of modelled AOD data from the Modern-Era Retrospective Analysis for Research and Application (MERRA), we further investigated into the chemical nature of AOD. The results suggest that mineral dust is also an important aerosol component in Córdoba, with maximum impact from November to February. The use of a long-term dataset finally allowed a preliminary assessment of AOD trends over the Córdoba region. For those months in which local sources and secondary processes were found to dominate the AOD (December to March), we found a positive AOD trend in the Córdoba outskirts, mainly in the areas with maximum urbanization/population growth over the investigated decade. Conversely, a negative AOD trend (up to −0.1 per decade) is observed all over the rural area of Córdoba during the BB season, this being attributed to a decrease of fires both at the local and the continental scale.

aerosols↗

Data acquisition system with pulse height capability for the TOFED time-of-flight neutron spectrometer

A new time-of-flight neutron spectrometer TOFED has been constructed for installation at Experimental Advanced Superconducting Tokamak. A data acquisition system combining measurements of flight time and energy from the interaction of neutrons with the TOFED scintillators has been developed. The data acquisition system can provide a digitizing resolution better than 1.5% (to be compared with the >10% resolution of the recoil particle energy in the plastic scintillators) and a time resolution <1 ns. At the same time, it is compatible with high count rate event recording, which is an essential feature to investigate phenomena occurring on time scales faster than the slowing down time (≈100 ms) of the beam ions in the plasma. Implications of these results on the TOFED capability to resolve fast ion signatures in the neutron spectrum from EAST plasmas are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A validated thermal and biological model for predicting algal productivity in large scale outdoor cultivation systems

Proper assessment of the sustainability of algal products requires an understanding of algal growth rate with regional and temporal resolution. This study developed a bulk growth model that utilizes geospatial data, reactor geometry inputs, and a maximum of six strain-specific parameters to predict algal productivity with temporal and regional resolution. The model requires local weather data to calculate the time-resolved culture temperature which is combined with a biological model based on maximum theoretical carbon fixation to predict the time-resolved algal concentration. Validation of the model against experimental data illustrates an average ac- curacy of 0.27% ± 5.32% when comparing algal concentration at harvest over 45 days of cultivation data for Galdieria sulphuraria 5587.1, and Galdieria sulphuraria Soos grown in photobioreactors (PBRs) in Mesa, AZ (33.4152° N, 111.8315° W). For open raceway ponds (ORPs), an accuracy of 0.9% ± 2.35% was achieved when comparing algal concentration at harvest over 50 days of cultivation data for Chlorella vulgaris, Desmodesmus intermedius, Nannochloropsis oceanica grown in Atlanta, GA (33.7490° N, 84.3880° W) and Mesa, AZ (33.4152° N, 111.8315° W). The validation trials spanned three seasons (winter, spring, and summer) to ensure model ac- curacy throughout the year, and concentration between harvests was modeled with hourly resolution. The validated model is used to assess the productivity at several case-study locations in the United States with Chlorella vulgaris, grown in open raceway ponds and Galdieria sulphuraria grown in vertical flat panel photo- bioreactors. In conclusion, the model has been published as an open-source tool, in an effort to increase the fidelity of future studies that rely on outdoor algae cultivation for feedstock production and allow for time resolved results for future techno-economic and life cycle assessments.

59 BASIC BIOLOGICAL SCIENCES↗

Building Benchmark Data Platform

This project is a three-year, four-laboratory collaboration to collect and curate a handful of high-resolution building systems datasets that have broad applicability to address highest-impact use cases. We will collect and curate high-resolution, well-calibrated time series of building operational and indoor/outdoor environmental data, which are crucial to understanding and optimizing building energy efficiency performance and demand flexibility capabilities as well as benchmarking energy algorithms.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗