Search NASA⌕ Search

SEARCH · Search NASA

Results for “triangularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Simple Cassegrain scanning system for infrared astronomy

To meet the need for a reliable, fast imaging system capable of being taken rapidly on and off the telescope, a simple, inexpensive, and compact Cassegrain reimaging system for scanning IR images was constructed. Using commercially available components without requiring close mechanical tolerances, the design solves the problem of beam stability pointed out by Koornneef and van Overbeeke (1976). For the moving-iron galvanometer scanner, it is noted that at the imaging frequency of 0.5 Hz, hysteresis in image plane motion was found to be less than 0.2 arc sec for a 64-arc sec scan, and the deviation from linearity with a triangular wave input was found to be less than 0.3 arc sec. This system and a scanning secondary were used to image Venus at 11.5 microns, and compared with the scanning secondary, the reimaging system did not appear to contribute any additional noise, considerably improved mechanical reliability, and eliminated cross-scan motion

Apt, J.↗
NASA NTRS1980

Compliance and stress intensity coefficients for short bar specimens with chevron notches

For the determination of fracture toughness especially with brittle materials, a short bar specimen with rectangular cross section and chevron notch can be used. As the crack propagates from the tip of the triangular notch, the load increases to a maximum then decreases. To obtain the relation between the fracture toughness and maximum load, calculations of Srawley and Gross for specimens with a straight-through crack were applied to the specimens with chevron notches. For the specimens with a straight-through crack, an analytical expression was obtained. This expression was used for the calculation of the fracture toughness versus maximum load relation under the assumption that the change of the compliance with crack length for the specimen with a chevron notch is the same as for a specimen with a straight-through crack.

Munz, D.↗
NASA NTRS1982

High-Frequency Gated Oscillator

New gated oscillator generates bursts of high-frequency sine waves, square waves, and triangular waves in response to control signals. Each burst starts at zero phase, with tight tolerances on signal amplitude and frequency. Frequencies in megahertz range are made possible by using high-speed comparators and high-speed flip-flop as fast-response threshold detector.

Berard, C. A.↗
NASA NTRS1980

Motion about the stable libration points in the linearized, restricted three-body problem

The motion of a point particle in the neighborhood of a triangular libration point (L sub 4 or L sub 5) in the linearized, restricted problem of three bodies in the plane is described. The derivation of the equations of motion is standard. From these equations, three invariants of the motion are obtained; the Jacobi integral is expressed linearly in terms of two of these. The trajectories for varied initial conditions are drawn, and a complete geometric description of the particle motion is given in elementary terms. Each trajectory has an exterior boundary curve; its equation is found. An approximation to this boundary curve was known; the two curves are compared graphically. For certain initial conditions, there is an interior region from which the trajectory is excluded; the equation of the boundary of this region is given.

Mittleman, D.↗
NASA NTRS1980

Grid generation for two-dimensional finite element flowfield computation

The finite element method for fluid dynamics was used to develop a two dimensional mesh generation scheme. The method consists of shearing and conformal maps with upper and lower surfaces handled independently to allow sharp leading edges. The method also generates meshes of triangular or quadrilateral elements.

Tatum, K. E.↗
NASA NTRS1979

A higher order panel method for linearized supersonic flow

The basic integral equations of linearized supersonic theory for an advanced supersonic panel method are derived. Methods using only linear varying source strength over each panel or only quadratic doublet strength over each panel gave good agreement with analytic solutions over cones and zero thickness cambered wings. For three dimensional bodies and wings of general shape, combined source and doublet panels with interior boundary conditions to eliminate the internal perturbations lead to a stable method providing good agreement experiment. A panel system with all edges contiguous resulted from dividing the basic four point non-planar panel into eight triangular subpanels, and the doublet strength was made continuous at all edges by a quadratic distribution over each subpanel. Superinclined panels were developed and tested on s simple nacelle and on an airplane model having engine inlets, with excellent results.

Ehlers, F. E.↗
NASA NTRS1981

Numerical algorithms for finite element computations on arrays of microprocessors

The development of a multicolored successive over relaxation (SOR) program for the finite element machine is discussed. The multicolored SOR method uses a generalization of the classical Red/Black grid point ordering for the SOR method. These multicolored orderings have the advantage of allowing the SOR method to be implemented as a Jacobi method, which is ideal for arrays of processors, but still enjoy the greater rate of convergence of the SOR method. The program solves a general second order self adjoint elliptic problem on a square region with Dirichlet boundary conditions, discretized by quadratic elements on triangular regions. For this general problem and discretization, six colors are necessary for the multicolored method to operate efficiently. The specific problem that was solved using the six color program was Poisson's equation; for Poisson's equation, three colors are necessary but six may be used. In general, the number of colors needed is a function of the differential equation, the region and boundary conditions, and the particular finite element used for the discretization.

Ortega, J. M.↗
NASA NTRS1980

Graphite composite truss welding and cap section forming subsystems. Volume 1: Executive summary

A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fiber cloth, impregnated with a polysulfone resin and coated with TI02 pigmented P-1700 resin into strips for the on-orbit fabrication of triangular truss segments. Ultrasonic welding in vacuum showed no identifiable effects on weld strength or resin flow characteristics. An existing bench model cap roll forming machine was modified and used to roll form caps for the prototype test truss and for column test specimens in order to test local buckling and torsional instability characteristics.

Source record↗
NASA NTRS1980

Graphite composite truss welding and cap section forming subsystems. Volume 2: Program results

The technology required to develop a beam builder which automatically fabricates long, continuous, lightweight, triangular truss members in space from graphite/thermoplastics composite materials is described. Objectives are: (1) continue the development of forming and welding methods for graphite/thermoplastic (GR/TP) composite material; (2) continue GR/TP materials technology development; and (3) fabricate and structurally test a lightweight truss segment.

Source record↗
NASA NTRS1980

Structural attachments for large space structures

The feasibility of fabricating beams in space and using them as components of a large, crew assembled structure, was investigated. Two projects were undertaken: (1) design and development of a ground version of an automated beam builder capable of producing triangular cross section aluminum beams; and (2) design and fabrication of lap joints to connect the beams orthogonally and centroidal end caps to connect beams end to end at any desired angle. The first project produced a beam building machine which fabricates aluminum beams suitable for neutral buoyancy evaluation. The second project produced concepts for the lap joint and end cap. However, neither of these joint concepts was suitable for use by a pressure suited crew member in a zero gravity environment. It is concluded that before the beams can be evaluated the joint designs need to be completed and sufficient joints produced to allow assembly of a complex structure.

Pruett, E. C.↗
NASA NTRS1981

Reduced order feedback control equations for linear time and frequency domain analysis

An algorithm was developed which can be used to obtain the equations. In a more general context, the algorithm computes a real nonsingular similarity transformation matrix which reduces a real nonsymmetric matrix to block diagonal form, each block of which is a real quasi upper triangular matrix. The algorithm works with both defective and derogatory matrices and when and if it fails, the resultant output can be used as a guide for the reformulation of the mathematical equations that lead up to the ill conditioned matrix which could not be block diagonalized.

Frisch, H. P.↗
NASA NTRS1981

On estimating the effects of clock instability with flicker noise characteristics

A scheme for flicker noise generation is given. The second approach is that of successive segmentation: A clock fluctuation is represented by 2N piecewise linear segments and then converted into a summation of N+1 triangular pulse train functions. The statistics of the clock instability are then formulated in terms of two sample variances at N+1 specified averaging times. The summation converges very rapidly that a value of N 6 is seldom necessary. An application to radio interferometric geodesy shows excellent agreement between the two approaches. Limitations to and the relative merits of the two approaches are discussed.

Wu, S. C.↗
NASA NTRS1980

UDU/T/ covariance factorization for Kalman filtering

There has been strong motivation to produce numerically stable formulations of the Kalman filter algorithms because it has long been known that the original discrete-time Kalman formulas are numerically unreliable. Numerical instability can be avoided by propagating certain factors of the estimate error covariance matrix rather than the covariance matrix itself. This paper documents filter algorithms that correspond to the covariance factorization P = UDU(T), where U is a unit upper triangular matrix and D is diagonal. Emphasis is on computational efficiency and numerical stability, since these properties are of key importance in real-time filter applications. The history of square-root and U-D covariance filters is reviewed. Simple examples are given to illustrate the numerical inadequacy of the Kalman covariance filter algorithms; these examples show how factorization techniques can give improved computational reliability.

Thornton, C. L.↗
NASA NTRS1981

Spectral transmission measurements in the nu sub 6 fundamental of /C-12/H3D at 8.65 microns

Spectral transmission measurements were performed at 300 K in the 8.65-micron fundamental band of monodeuterated methane, a trace constituent in the atmosphere of Jupiter. A theoretical curve is obtained from line-by-line computation of the spectral transmission utilizing a triangular slit function with full width at half-maximum. The agreement between theoretical and experimental spectral transmission curves suggests that deuteration does not affect the collision-broadened half-widths significantly in the two extreme cases of broadening being considered.

Varanasi, P.↗
NASA NTRS1980

Modular space structures

The Extendable Tetrahedral Truss orbiting antenna concept, comprising the use of prefabricated, automatically deployable lattice structures and their subsequent assembly into larger structures suitable for microwave antenna use, is described. It is assumed that the Space Shuttle Orbiter payload bay will be able to accommodate only modular portions of the structural system required, and that the Space Shuttle crew will furnish the manual labor entailed by orbital assembly. It is concluded that a deployable beam module system may be a more elegant design solution than the alternative triangular-module system.

Vaughan, D. H.↗
NASA NTRS1981

Sensation of rotation about a vertical axis with a fixed visual field in different illuminations and in the dark

The effects of the oculogyro illusion of the relative motion of a spot fixed with respect to the subject during subject rotation and of a fixed striped peripheral visual field under different levels of illumination on perceptions of rotation about a vertical axis are investigated. Subjects were seated in a rotatable flight trainer cockpit with visual fields consisting of darkness, a dim peripheral field, and a bright peripheral field, all fixed with respect to the subject, and subject perceptual thresholds, frequency responses and sensations of displacement and velocity were measured during trainer rotation at constant and varying angular accelerations. The perception of angular acceleration is found to exhibit a significantly lower threshold and a reduced latency time in the illuminated visual fields which was independent of the level of illumination. Subjective frequency responses showed a higher gain in the illuminated presentations, while subjective displacements during triangular velocity stimuli exhibited no difference for the different visual cues. Finally, magnitude estimations of the after-rotation associated with deceleration from a constant velocity showed a greater rising speed, larger velocity and longer duration under illumination. Results show that, for low accelerations, the visual input enhances sensitivity to self-motion, an effect explained by the oculogyral illusion.

Huang, J.↗
NASA NTRS1981

A continuous-vorticity panel method for lifting surfaces

A continuous-vorticity panel method is developed and utilized to predict the steady aerodynamic loads on lifting surfaces having sharp-edge separation. Triangular panels with linearly varying vorticity are used. The velocity field generated by an individual element is obtained in closed form. An optimization scheme is constructed for finding the vorticity at the nodes of the elements. The method is not restricted by aspect ratios, angles of attack, planforms, or camber. Rectangular and delta wings are presented as numerical examples. The numerical results are in good agreement with the experimental data for incompressible flows.

Yen, A.↗
NASA NTRS1982

Solar-Heated Office Building -- Dallas, Texas

Solar heating system designed to supply 87 percent of space heating and 100 percent of potable hot-water needs of large office building in Dallas, Texas. Unique feature of array serves as roofing over office lobby and gives building attractive triangular appearance. Report includes basic system drawings, test data, operating procedures, and maintenance instructions.

Source record↗