Search NASA⌕ Search

SEARCH · Search NASA

Results for “turbulence model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Pixel-Resolved Long-Context Learning for Turbulence at Exascale: Resolving Small-scale Eddies Toward the Viscous Limit

Turbulence plays a crucial role in multiphysics applications, including aerodynamics, fusion, and combustion. Accurately capturing turbulence's multiscale characteristics is essential for reliable predictions of multiphysics interactions, but remains a grand challenge even for exascale supercomputers and advanced deep learning models. The extreme-resolution data required to represent turbulence, ranging from billions to trillions of grid points, pose prohibitive computational costs for models based on architectures like vision transformers. To address this challenge, we introduce a multiscale hierarchical Turbulence Transformer that reduces sequence length from billions to a few millions and a novel RingX sequence parallelism approach that enables scalable long-context learning. We perform scaling and science runs on the Frontier supercomputer. Our approach demonstrates excellent performance up to 1.1 EFLOPS on 32,768 AMD GPUs, with a scaling efficiency of 94\%. To our knowledge, this is the first AI model for turbulence that can capture small-scale eddies down to the dissipative range in three-dimensional turbulence at high Reynolds numbers.

Yin, Junqi [ORNL] (ORCID:0000000338435520)↗

A Parameterization of Turbulent Dissipation and Pressure Damping Time Scales in Stably Stratified Inversions, and its Effects on Low Clouds in Global Simulations

Abstract It is difficult for coarse‐resolution global models of the atmosphere to accurately simulate the observed distribution of low clouds. In particular, it is difficult for moist turbulence closure models to simulate sufficiently bright near‐coastal stratocumulus (Sc) without simulating overly bright marine shallow cumuli (Cu). To parameterize bright Sc, a turbulence parameterization must damp the turbulent fluxes of heat and moisture above cloud top in order to prevent excessive entrainment of dry air into cloud top. To parameterize dim shallow Cu, the subgrid variances of temperature and moisture must remain large, in order to permit partial cloudiness. However, damping the fluxes but not the variances just above cloud top is difficult if a parameterization uses a single “master” time scale to damp both. In nature, the above‐cloud fluxes are damped by pressure fluctuations, whereas scalar variances are damped by a different process, namely, turbulent dissipation. In a stably stratified inversion above cloud, pressure damping is large but turbulent dissipation is small. To avoid this problem, a multitime scale parameterization for damping has been developed. The damping parameterization has been implemented in a global model and evaluated. The parameterization is capable of dimming shallow Cu while producing adequately bright Sc.

54 ENVIRONMENTAL SCIENCES↗

Multi-scale transport in the DIII-D ITER baseline scenario with direct electron heating and projection to ITER

Multi-scale fluctuations measured by turbulence diagnostics spanning long and short wavelength spatial scales impact energy confinement and the scale-lengths of plasma kinetic profiles in the DIII-D ITER baseline scenario with direct electron heating. Contrasting discharge phases with ECH + neutral beam injection (NBI) and NBI only at similar rotation reveal higher energy confinement and lower fluctuations when only NBI heating is used. Modeling of the core transport with TGYRO using the TGLF turbulent transport model and NEO neoclassical transport reproduces the experimental profile changes upon application of direct electron heating and indicates that multi-scale transport mechanisms are responsible for changes in the temperature and density profiles. Intermediate and high-k fluctuations appear responsible for the enhanced electron thermal flux, and intermediate-k electron modes produce an inward particle pinch that increases the inverse density scale length. Projection to ITER is performed with TGLF and indicates a density profile that has a finite scale length due to intermediate-k electron modes at low collisionality and increases the fusion gain. For a range of E×B shear, the dominant mechanism that increases fusion performance is suppression of outward low-k particle flux and increased density peaking.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dataset for "FLEXPART-WRF simulations to assess dust transport in the convective boundary layer at the Southern Great Plains site"

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth’s radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud-relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large-eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large-eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART-WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi-single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. These results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗

Observational Investigation of the Effect of Turbulence on Microphysics and Precipitation in Warm Marine Boundary Layer Clouds

Abstract Turbulence is omnipresent in the marine boundary layer (MBL) and several mechanisms have been proposed regarding its role on MBL cloud microphysics. In particular, past modeling studies suggested that increasing turbulence broaden the droplet size distribution (DSD) and leads to precipitation initiation, this suggested relationship has not been evaluated yet using long‐term observations. Here, comprehensive retrievals from long‐term ground‐based observations are used to explore the impact of turbulence on microphysics and precipitation in drizzling MBL clouds. Our analysis supports that broader DSD and larger droplets are observed with strong turbulence, but interestingly, the precipitation is reduced instead of being enhanced. This suppression mechanism is mainly due to the entrainment and mixing process in which the entrained dry air evaporates cloud water. This study provides observational evidence to show the complex effect of turbulence on MBL cloud properties and implies the potential influence of turbulence on the clouds lifetime.

54 ENVIRONMENTAL SCIENCES↗

Understanding changes in cloud simulations from E3SM version 1 to version 2

Abstract. This study documents clouds simulated by the Energy Exascale Earth System Model (E3SM) version 2 (E3SMv2) and attempts to understand what causes the model behavior change in clouds relative to E3SMv1. This is done by analyzing the last 30-year (1985–2014) data from the 165-year historical simulations using E3SMv1 and v2 and four sensitivity tests to isolate the impact of changes in model parameter choices in its turbulence, shallow convection, and cloud macrophysics parameterization (Cloud Layers Unified By Binormals, CLUBB); microphysical parameterization (MG2); and deep-convection scheme (ZM), as well as model physics changes in convective triggering. It is shown that E3SMv2 significantly improves the simulation of subtropical coastal stratocumulus clouds and clouds with optical depth larger than 3.6 over the stratocumulus-to-cumulus transition regimes, where the shortwave cloud radiative effect (SWCRE) is also improved, and the Southern Ocean (SO) while seeing an overall slight degradation in low clouds over other tropical and subtropical oceans. The better performance in E3SMv1 over those regions is partially due to error compensation between its simulated optically thin and intermediate low clouds for which E3SMv2 actually improves simulation of optically intermediate low clouds. Sensitivity tests indicate that the changes in low clouds are primarily due to the tuning done in CLUBB. The impact of the ZM tuning is mainly on optically intermediate and thick high clouds, contributing to an improved SWCRE and longwave cloud radiative effect (LWCRE). The impact of the MG2 tuning and the new convective trigger is primarily on the high latitudes and the SO. They have a relatively smaller impact on clouds than CLUBB tuning and ZM tuning do. This study offers additional insights into clouds simulated in E3SMv2 by utilizing multiple data sets and the Cloud Feedback Model Intercomparison Project (CFMIP) Observation Simulator Package (COSP) diagnostic tool as well as sensitivity tests. The improved understanding will benefit future E3SM developments.

58 GEOSCIENCES↗

Representation of atmosphere-induced heterogeneity in land–atmosphere interactions in E3SM–MMFv2

In the Energy Exascale Earth System Model (E3SM) Multi-scale Modeling Framework (MMF), where parameterizations of convection and turbulence are replaced by a 2-D cloud-resolving model (CRM), there are multiple options to represent land–atmosphere interactions. Here, we propose three different coupling strategies, namely the (1) coupling of a single land surface model to the global grid (MMF), (2) coupling a single land copy directly to the embedded CRM (SFLX2CRM), and (3) coupling a single copy of land model to each column of the CRM grid (MAML). In the MAML (Multi-Atmosphere Multi-Land) framework, a land model is coupled to CRM at the CRM-grid scale by coupling an individual copy of a land model to each CRM grid. Therefore, we can represent intra-CRM heterogeneity in the land–atmosphere interaction processes. There are 5-year global simulations run using these three coupling strategies, and we find some regional differences but overall small changes with respect to whether a land model is coupled to CRM or a global atmosphere. In MAML, the spatial heterogeneity within CRM induces stronger turbulence, which leads to the changes in soil moisture, surface heat fluxes, and precipitation. However, the differences in the MAML from the other two cases are rather weak, suggesting that the impact of using MAML does not justify the increase in cost.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural uncertainty assessment for fire-engulfed objects in crosswind: Establishing credibility for a multiphysics wall-modeled large-eddy simulation paradigm

A structural uncertainty validation study for a large-scale, fire-engulfed, elevated object subjected to crosswind is presented to establish the credibility of a high-fidelity, low-Mach, turbulent reacting flow wall-modeled large-eddy simulation (WMLES) approach that includes multiphysics coupling to participating media radiation and conjugate heat transfer. To establish that WMLES can accurately predict surface quantities including drag and pressure coefficient in the low-Mach crosswind regime, a foundational elevated isothermal cylinder validation case is presented at a similar gap-to-diameter ratio of 0.25, spanning the subcritical to supercritical drag regime (Re 𝐷 = 1.1 × 10 5 and 4.3 × 10 5 , respectively). Here, this study exercised both static and dynamic coefficient LES (Smagorinsky and 𝑘 sgs ) with both local and exchange-based velocity sampling. Results showcase that the drag crisis (or the sudden drop in drag coefficient at increased Re 𝐷 ) is well captured when using an exchange-based dynamic coefficient WMLES methodology, while noting lack of mesh convergence and overall drag and pressure coefficient predictively when using a static coefficient, local velocity sampling WMLES. For the 𝒪⁡(10) m JP-8 liquid pool fire crosswind validation study presented, two experimental crosswind configurations (2 m/s and 9.5 m/s) are showcased for a fire-engulfed mock fuselage roughly 4 m in diameter. Using the best model-form practices identified in the isothermal study, dynamic coefficient 𝑘 sgs exchange-based WMLES fire validation findings demonstrate accurate peak irradiation and skin temperature predictions as a function of crosswind magnitude. Excessive yaw in the low-crosswind fuselage configuration, consistent with experimental findings, captured a significant predicted asymmetry in flame attachment and heat flux toward the downwind cylindrical cap—indicative of axial vortex structures transporting the flame along the upper and lower fuselage leeward surface. All fire mesh resolution simulations captured the experimental finding that as crosswind increased, predicted flame shape and peak irradiation magnitude onto the fuselage transitioned from a windward to a leeward cylinder location due to the migration of the upper- to lower-shear fuel/air mixing layer thereby demonstrating the novelty, significance, and credibility of this high-fidelity WMLES reacting flow framework.

Domino, Stefan Paul [Sandia National Laboratories ↗

Dampening of the Precipitation Response to Aerosol Pollution From Turbulence in Cumulus Clouds

Using aircraft observations and a cloud model with particle‐based microphysics, it is shown that the enhancement of drop collision‐coalescence from turbulence in clouds not only leads to earlier onset of rain in warm cumulus clouds as past studies have suggested, but also significantly dampens the precipitation susceptibility to aerosol loading. Enhanced drop coalescence from turbulence substantially increases the production of drizzle embryos just above cloud base, which in turn act as seeds that accelerate rain drop growth at mid and upper cloud levels even in highly polluted conditions. In contrast, pollution aerosols strongly inhibit rainfall when the commonly assumed gravitational‐only collision kernel is used and turbulent coalescence is neglected. Overall, turbulence‐enhanced drop coalescence strongly influences the response of warm cumulus clouds and precipitation to aerosol loading, suggesting that the effects of turbulent coalescence should be included in Earth system model representations of aerosol‐cloud‐precipitation interactions and aerosol indirect radiative forcing.

Chandrakar, Kamal Kant [NSF National Center for At↗

In situ recording of Mars soundscape

Abstract Before the Perseverance rover landing, the acoustic environment of Mars was unknown. Models predicted that: (1) atmospheric turbulence changes at centimetre scales or smaller at the point where molecular viscosity converts kinetic energy into heat 1 , (2) the speed of sound varies at the surface with frequency 2,3 and (3) high-frequency waves are strongly attenuated with distance in CO 2 (refs. 2–4 ). However, theoretical models were uncertain because of a lack of experimental data at low pressure and the difficulty to characterize turbulence or attenuation in a closed environment. Here, using Perseverance microphone recordings, we present the first characterization of the acoustic environment on Mars and pressure fluctuations in the audible range and beyond, from 20 Hz to 50 kHz. We find that atmospheric sounds extend measurements of pressure variations down to 1,000 times smaller scales than ever observed before, showing a dissipative regime extending over five orders of magnitude in energy. Using point sources of sound (Ingenuity rotorcraft, laser-induced sparks), we highlight two distinct values for the speed of sound that are about 10 m s −1 apart below and above 240 Hz, a unique characteristic of low-pressure CO 2 -dominated atmosphere. We also provide the acoustic attenuation with distance above 2 kHz, allowing us to explain the large contribution of the CO 2 vibrational relaxation in the audible range. These results establish a ground truth for the modelling of acoustic processes, which is critical for studies in atmospheres such as those of Mars and Venus.

79 ASTRONOMY AND ASTROPHYSICS↗

Revisiting a Drag Partition Model For Canopy-Like Roughness Elements

Turbulent flows over a large surface area (S) covered by n obstacles experience an overall drag due to the presence of the ground and the protruding obstacles into the flow. The drag partition between the roughness obstacles and the ground is analyzed using an analytical model proposed by Raupach (Boundary-Layer Meteorol 60:375-395, 1992) and is hereafter referred to as R92. The R92 is based on the premise that the wake behind an isolated roughness element can be described by a shelter area A and a shelter volume V. The individual sizes of A and V without any interference from other obstacles can be determined from scaling analysis for the spread of wakes. To upscale from an individual roughness element to n/S elements where wakes may interact, R92 adopted a background stress re-normalizing instead of reducing A or V with each element addition. This work demonstrates that R92’s approach results in a linear background stress reduction in A and V only when the ratio of n/S is small, due to a low probability of wake interactions. This probabilistic nature suggests that up-scaling from individual to multiple roughness elements can be re-formulated using stochastic averaging methods proposed here. The two approaches are shown to recover R92 under plausible conditions. An alternative scaling for the shelter volume is also proposed here using thermodynamic arguments of work and dissipation though the final outcome remains similar to R92. Comparisons between R92 and available data spanning more than two decades after R92 on blocks and vegetation-like roughness elements confirm the practical utility of R92. The agreement between R92 and this updated databases of experiments and simulations confirm the potential use of R92 in large-scale models provided that the relevant parameters accommodate certain features of the roughness element type (cube versus vegetation-like) and, to a lesser extent, their configuration throughout S. Last, a comparison between R92 and models based on first-order closure principles with constant mixing length suggests that R92 can outperform such models when evaluated across a wide range of roughness densities.

canopy turbulence↗

Next-Generation Simulations of the Remarkable Deaths Of Massive Stars [Slides]

3D models of stellar convection are necessary for accurate description of state of model near collapse. Convection is occurring at many scales with the large dominant mode near collapse. 3D instabilities can affect flow properties and mass entrainment. Mach number profiles show favorable conditions for explosion. 3D rotating progenitor models are ALSO necessary. The redistribution of AM diverges from the MESA model, with implications for remnant. There is turbulent transport of AM in convective shell regions. Multi-D models can provide input for successful CCSN models. Larger non-radial kinetic energy exists when using multi-D progenitor input. The 3D CCSN model showed prompt convection and asymmetric shock runaway. Explosion properties suggest robust impact on multi-messenger signals.

79 ASTRONOMY AND ASTROPHYSICS↗

Unstable turbulent channel flow response to spanwise-heterogeneous heat fluxes: Prandtl's secondary flow of the third kind

Turbulent secondary flows are defined as Prandtl's secondary flow of the first or second kind, the former produced by stretching and/or tilting of vorticity, the latter produced via spatial heterogeneity of Reynolds stresses. Both mechanisms are instantaneously active within inertia-dominated wall turbulence; Reynolds stress spatial heterogeneity is required for Reynolds-averaged secondary flows. Spanwise-variable surface roughness can induce turbulent stress spatial heterogeneity in the spanwise–wall-normal plane and provide sustenance for streamwise-aligned mean secondary flows. Herein, we demonstrate that turbulent secondary flows can also be sustained by spanwise variability in the surface heat flux in unstably stratified turbulent channels, defined hereafter as Prandtl's secondary flow of the third kind. Support for this mechanism is established with scaling arguments, while large-eddy simulation is used to model inertia-dominated channel turbulence responding to a lower boundary with uniform aerodynamic/hydrodynamic roughness but spanwise-variable surface heat flux. Transport equations for streamwise vorticity and turbulent kinetic energy, k, outline the conditions needed for third-kind production: shear and buoyancy production over the elevated heat flux regions necessitates lateral entrainment of low- k fluid, inducing mean counter-rotating secondary cells aligned such that upwelling and downwelling occur over the high and low heat flux regions, respectively. Buoyancy-driven production of k alters aggregate flow response and thus is a distinctly different mechanism responsible for sustenance of secondary flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observationally driven Resource Assessment with CoupLEd models (ORACLE)

This project seeks to carry out a multifaceted analysis combining buoy observations, machine learning, turbulence, satellite data and high-resolution modeling. Our analyses will investigate air–sea interaction physics governing the variation of the winds with height and influence of clouds, uncertainty in coupled ocean-wave-atmosphere mesoscale models to capture certain key atmospheric phenomenon observed over the U.S. West Coast, impact of climate change, and the fidelity with which resource characterization models describe the range of observed offshore wind conditions. This project will focus its efforts on characterizing and assessing the atmospheric and oceanographic conditions along the U.S. West Coast.

Wind, Energy↗

Simulated Dust Transport in the Convective Boundary Layer

Soil dusts are an important source of aerosol in agricultural regions and can affect the Earth's radiation budget through the modification of cloud properties, and in particular, through their ability to act as ice nucleating particles. In order to impact cloud properties, agricultural soil dusts need to be transported from the point of emission to cloud–relevant altitudes. Vertical transport within the planetary boundary layer is strongly controlled by turbulence and is challenging to represent accurately in regional and global models. Large–eddy simulations (LES) are run at resolutions capable of resolving most of the turbulent energy directly and can thus better simulate vertical transport. In this study, we leverage the LES ARM Symbiotic Simulation and Observation (LASSO) large–eddy simulations to simulate vertical transport of agricultural dust within the turbulent boundary layer using a modified version of the stochastic dispersion model FLEXPART–WRF. We find that the modified model is better capable of simulating particle transport due to turbulence, and that particle size was the greatest factor in determining particle lifetime. Individual meteorology and particle density had intermediate effects upon particle transport, while release height had little effect upon simulation results. Finally, we utilize a quasi–single column model (QSCM) approach to determine how our results compare to a parameterized treatment of turbulence. The QSCM simulations led to greater tracer transport out of the boundary layer, with ramifications for any studies utilizing a Lagrangian stochastic model to understand tracer dispersion. Furthermore, these results highlight the importance of accurately simulating turbulence for understanding particle transport.

54 ENVIRONMENTAL SCIENCES↗

Closures for multicomponent reacting flows based on dispersion analysis

This work presents algebraic closure models associated with advective transport and nonlinear reactions in a Reynolds-averaged Navier-Stokes context for a system of species subject to binary reactions and transport by advection and diffusion. Expanding upon analysis originally developed for non-reactive transport in the context of Taylor dispersion of scalars, this work extends the modified gradient diffusion model explicated by Peters [N. Peters, Turbulent Combustion, Cambridge Monographs on Mechanics (Cambridge University Press, Cambridge, 2000)] and based on work by Corrsin [S. Corrsin, The reactant concentration spectrum in turbulent mixing with a first-order reaction, J. Fluid Mech. 11, 407 (1961)] beyond single-component transport phenomena and involving nonlinear reactions. The presented model forms, from this weakly nonlinear extension of the original dispersion theory, lead to an analytic expression for the eddy diffusivity matrix that explicitly captures the influence of the reaction kinetics on the closure operators. Furthermore, we demonstrate that the derived model form directly translates between flow topologies through a priori and a posteriori testing of a binary species system subject to homogeneous isotropic turbulence. Using two- and three-dimensional direct numerical simulations involving laminar and turbulent flows, it is shown that this framework improves prediction of mean quantities compared to previous results. Lastly, the presented model form, collapses to the earlier gradient diffusion and its modified version derived by Corrsin in the limits of nonreactive species and linear reactions, respectively.

42 ENGINEERING↗

Numerical analysis of particle dispersion and deposition in coal combustion using large-eddy simulation

High-fidelity modeling provides a useful approach to investigate the particle dispersion and deposition mechanism in pulverized coal combustion. To be able to analyze these detailed mechanisms, this work couples detailed multiphysics models for poly-dispersed turbulent, particle-laden flow, particle and gas phase reaction chemistry, convective, conductive and radiative heat transfer, ash formation and deposition with a Large-Eddy Simulation (LES) approach to numerically simulate coal combustion in a downfired self-sustained oxy-fuel combustor (OFC). It is necessary to explicitly capture all but the highest frequency dynamics of the turbulence and its coupling with each of the other physical phenomena using LES. Effects of subgrid-scale unresolved turbulence on the particle motions are also analyzed by a novel Stokes number analysis. Due to the inherent relation ship between coal combustion and ash deposition, this study integrates the improved ash deposition model into the numerical simulation. Overall simulation results are compared with experimentally measured data from the OFC. The simulation and measured data for the averaged gas temperature and deposition rates agree with 5% and 28%. This study shows that high-fidelity LES coupled with other detailed multiphysics models running on a exascale computing facility can provide a good representation of complex coal combustion and deposition in a laboratory-scale furnace.

multiphysics model↗

Equilibrium reconstruction of DIII-D plasmas using predictive modeling of the pressure profile

New workflows have been developed for predictive modeling of magnetohydrodynamic (MHD) equilibrium in tokamak plasmas. The goal of this work is to predict the MHD equilibrium in tokamak discharges without having measurements of the kinetic profiles. The workflows include a cold start tool, which constructs all the profiles and power flows needed by transport codes; a Grad–Shafranov equilibrium solver; and various codes for the sources and sinks. For validation purposes, a database of DIII-D tokamak discharges has been constructed that is comprised of scans in the plasma current, toroidal magnetic field, and triangularity. Initial efforts focused on developing a workflow utilizing an empirically derived pressure model tuned to DIII-D discharges with monotonic safety factor profiles. This workflow shows good agreement with experimental kinetic equilibrium calculations, but is limited in that it is a single fluid (equal ion and electron temperatures) model and lacks H-mode pedestal predictions. The best agreement with the H-mode database is obtained using a theory-based workflow utilizing pressure profile predictions from a coupled TGLF turbulent transport and EPED pedestal models together with external magnetics and Motional Stark Effect (MSE) data to construct the equilibrium. Here, we obtain an average root mean square error of 5.1% in the safety factor profile when comparing the predicted and experimental kinetic equilibrium. We also find good agreement with the plasma stored energy, internal inductance, and pressure profiles. Including MSE data in the theory-based workflow results in noticeably improved agreement with the q-profiles in high triangularity discharges in comparison with the results obtained with magnetic data only. The predictive equilibrium workflow is expected to have wide applications in experimental planning, between-shot analysis, and reactor studies.

Kinsey, J. E. (ORCID:0000000193347473)↗