Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Identification of B-K near edge x-ray absorption fine structure peaks of boron nitride thin films prepared by sputtering deposition

Four {pi}{sup *} resonance peaks were observed in the B-K near edge x-ray absorption fine structure spectra of boron nitride thin films prepared by magnetron sputtering. In the past, these peaks have been explained as the K-absorption of boron atoms, which are present in environment containing nitrogen vacancies, the number of which is 1-3 corresponding to the three peaks at higher photon energy. However, the authors found that there was a strong correlation between the intensities of these three peaks and that of O-K absorption after wide range scanning and simultaneous measurement of nitrogen and oxygen K-absorptions of the BN films. Therefore, the authors conclude that these three peaks at the higher energy side correspond to boron atoms bound to one-to-three oxygen atoms instead of three nitrogen atoms surrounding the boron atom in the h-BN structure. The result of the first-principles calculation with a simple cluster model supported the validity of this explanation.

36 MATERIALS SCIENCE↗

Room-temperature optical absorption in the InAs/GaAs quantum-dot superlattice under an electric field

Electroluminescence and absorption spectra of a ten-layer InAs/GaAs quantum dot (QD) superlattice built in a two-section laser with sections of equal length is experimentally studied at room temperature. The thickness of the GaAs spacer layer between InAs QD layers, determined by transmission electron microscopy, is {approx}6 nm. In contrast to tunnel-coupled QDs, QD superlattices amplify the optical polarization intensity and waveguide absorption of the TM mode in comparison with the TE mode. It is found that variations in the multimodal periodic spectrum of differential absorption of the QD superlattice structure are strongly linearly dependent on the applied electric field. Differential absorption spectra exhibit the Wannier-Stark effect in the InAs/GaAs QD superlattice, in which, in the presence of an external electric field, coupling of wave functions of miniband electron states is suppressed and a series of discrete levels called the Wannier-Stark ladder states are formed.

36 MATERIALS SCIENCE↗

Absorptivity of semiconductors used in the production of solar cell panels

The dependence of the absorptivity of semiconductors on the thickness of the absorbing layer is studied for crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS), and copper gallium diselenide (CuGaSe{sub 2}, CGS). The calculations are performed with consideration for the spectral distribution of AM1.5 standard solar radiation and the absorption coefficients of the materials. It is shown that, in the region of wavelengths {lambda} = {lambda}{sub g} = hc/E{sub g}, almost total absorption of the photons in AM1.5 solar radiation is attained in c-Si at the thickness d = 7-8 mm, in a-Si at d = 30-60 {mu}m, in CdTe at d = 20-30 {mu}m, and in CIS and CGS at d = 3-4 {mu}m. The results differ from previously reported data for these materials (especially for c-Si). In previous publications, the thickness needed for the semiconductor to absorb solar radiation completely was identified with the effective light penetration depth at a certain wavelength in the region of fundamental absorption for the semiconductor.

36 MATERIALS SCIENCE↗

Simulation of the absorption of a femtosecond laser pulse in crystalline silicon

The effect of the nonlinearity of the absorptivity and absorption coefficient on the process of the intense photoexcitation of silicon is studied on the basis of a model of the two-photon excitation of a semiconductor with consideration for external emission. Correlation between the results of simulation of the absorption of a femtosecond laser pulse in single-crystal silicon and experimental data under conditions of the femtosecond excitation of surface plasmon polaritons makes it possible to refine the mechanism of changes in the absorptivity and to make an inference regarding the necessity of considering these changes when assessing the conditions of the laser treatment of semiconductors. Avenues for further improvement of the theoretical model are discussed.

36 MATERIALS SCIENCE↗

A narrow window of Rabi frequency for competition between electromagnetically induced transparency and Raman absorption

This investigation clarifies the transition phenomenon between the electromagnetically induced transparency (EIT) and Raman absorption in a ladder-type system of Doppler-broadened cesium vapor. A competition window of this transition was found to be as narrow as 2 MHz defined by the probe Rabi frequency. For a weak probe, the spectrum of EIT associated with quantum interference suggests that the effect of the Doppler velocity on the spectrum is negligible. When the Rabi frequency of the probe becomes comparable with the effective decay rate, an electromagnetically induced absorption (EIA) dip emerges at the center of the power broadened EIT peak. While the Rabi frequency of the probe exceeds the effective decay rate, decoherence that is generated by the intensified probe field occurs and Raman absorption dominates the interaction process, yielding a pure absorption spectrum; the Doppler velocity plays an important role in the interaction. A theory that is based on density matrix simulation, with or without the Doppler effect, can qualitatively fit the experimental data. In this work, the coherence of atom-photon interactions is created or destroyed using the probe Rabi frequency as a decoherence source.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Candidate for an Intrinsic Dusty Absorber with a Metal-rich Damped Lyα Absorption Line System in the Quasar J170542.91+354340.2

We present a detailed analysis of the unusual damped Lyα absorption line system (DLA) toward the quasar SDSS J170542.91+354340.2 at a redshift of 2, previously reported by Noterdaeme et al. as one of the very few CO absorbers known to date at high z. This DLA is exceptional in that: (1) its extinction curve is similar to peculiar Milky Way sightlines penetrating star formation regions; (2) its absorption components are redshifted at a speed of several hundred km s{sup −1} compared to broad Balmer emission lines; (3) its gas-phase metallicity is super-solar as evaluated from more than 30 absorption lines; (4) detection of residual flux in the DLA trough and variability of C IV absorption is possible. Based on these facts, we argue that this dusty DLA is a good candidate for an intrinsic quasar 2175 Å absorber, and can originate from star formation regions of the quasar’s host galaxy. We discuss in detail the gas and dust properties, and the dust depletion. Follow-up observations, such as spectropolarimetry and optical/infrared spectroscopy, will help to confirm the system’s intrinsic nature and to explore how dust grains behave in the extreme environments proximate to quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ x-ray absorption spectroscopic study of the Li[Ni[subscript 1/3]Co[subscript 1/3]Mn[subscript 1/3]]O[subscript 2]

The layered LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} system has recently drawn considerable interest for use as a cathode material for rechargeable lithium batteries. In order to investigate the charge-compensation mechanism and structural perturbations occurring in the system during cycling, in situ x-ray absorption spectroscopy (XAS) measurements were performed utilizing a novel electrochemical in situ cell specifically designed for long term x-ray experiments. The cell was cycled at a moderate rate through a typical Li-ion battery operating voltage range (2.9-4.7 V). The electrode contained 2.025 mg of LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} on a 25-{micro}m Al foil and had an area of 0.79 cm{sup 2}. The x-ray absorption spectroscopy (XAS) measurements were performed at the Ni, Co, and the Mn edges at different states of charge (SOC) during cycling, revealing details about the response of the cathode to Li insertion and extraction processes. Changes of bond distance and coordination number of Ni, Co, and Mn absorbers as a function of the state of charge of the material were obtained from the extended x-ray-absorption fine structure (EXAFS) region of the spectra. The x-ray absorption near-edge structure (XANES) region was studied in order to characterize the oxidation states of the 3d transition metals during cycling (Li extraction/insertion). We found that oxidation states of transition metals in LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} are Ni{sup 2+}, Co{sup 3+}, and Mn{sup 4+}, whereas during charging Ni{sup 2+} is oxidized to Ni{sup 4+} through an intermediate stage of Ni{sup 3+}, Co{sup 3+} is oxidized almost to Co{sup 4+} and, utilizing Faraday's calculation and XAS results, the Co was found to be at Co{sup 3.92+} at the end of the charge, while Mn was found to be electrochemically inactive and remains as Mn{sup 4+}. The EXAFS data that were collected continuously during cycling revealed details about the response of the cathode to Li insertion and extraction. These measurements on the LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} cathode confirmed that the material retains its symmetry and good structural short-range order leading to superior cycling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probing the effect of electron acceptor structure and morphology on charge separation in ZnO/P3HT hybrid photovoltaics using steady-state transient photoinduced absorption.

Hybrid cells based on ZnO/P3HT heterojunctions have the advantage of better device stability, but suffer poor photovoltaic performance compared to all-organic cells which use PCBM as the electron acceptor. The photovoltaic effect in these hybrid systems is accomplished via photoinduced charge separation at the interface between the absorbing polymer (P3HT) and the electron acceptor (ZnO). Efforts to improve device performance in these hybrid systems have centered on reducing the required diffusion length for P3HT excitons by creating bulk heterojunctions from either ZnO nanoparticles and P3HT or using ZnO precursors which convert in situ to form ZnO networks inside a polymer matrix. In this study, we use transient photoinduced absorption to access the lifetimes of P3HT polarons and excitons in bulk heterojunctions constructed using P3HT and ZnO nanoparticles or ZnO precursors and compare to those in planar ZnO/P3HT devices. Steady-state photoinduced absorption spectra of ZnO/P3HT show characteristic of sub-bandgap transitions associated with the formation of long-lived (msec lifetimes) radical cations (polarons) in P3HT. Similar short-lived polarons (psec lifetimes) are observed by picosecond transient photoinduced absorption in addition to infrared absorption due to excitons. Here we examine the lifetimes of both the excitons and polarons in ZnO:P3HT bulk heterojunctions using both picosecond and millisecond techniques in an effort to understand the effect of the structure and morphology of the electron acceptor on charge separation. We will also compare the relative photoexitation lifetimes, hence charge separation efficiency, for the planar and bulk heterojunction hybrid system to an all-organic P3HT:PCBM system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-absorption and Phonon Pulse Shape Discrimination in Scintillating Bolometers

In this work, we show that self-absorption of photons in scintillating bolometers can differentiate phonon pulse shapes between α (or nuclear recoil) and β/γ signals. This enables phonon pulse shape discrimination for particle identification. We establish a detector signal model that includes self-absorption and compare the simulated phonon pulse shapes with previously reported experimental results. The model predicts increase in pulse shape difference at higher self-absorption. Based on this result, we propose a new design of scintillating bolometers using 4π light reflectors for maximized self-absorption and only a single phonon readout, instead of light detectors that are typically employed for particle discrimination in scintillating bolometers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electrospun Synthesis of Reduced Graphene Oxide (RGO)/NiZn Ferrite Nanocomposites for Excellent Microwave Absorption Properties

In this work, NiZn ferrite nanofibers were fabricated via electrospinning technique, followed by physical conversion into reduced graphene oxide (RGO)/NiZn ferrite nanocomposites. The whole graphene nanosheets were uniformly decorated with these magnetic nanocrystals without aggregation. The obtained ternary composite was characterized by various instruments for the chemical composition and microstructure. The results show that RGO/NiZn ferrite nanocomposites have remarkable improvements in both permittivity and permeability, which can be attributed to the combination of the good conductivity of light-weight graphene and high magnetocrystalline anisotropy of NiZn ferrites, thus significantly improving microwave absorption properties. With a matching thickness of only 2.0 mm, the reflection loss of superior sample of RGO/Ni{sub 0.7}Zn{sub 0.3}Fe{sub 2}O{sub 4} hybrid can reach − 37.71 dB at 12.5 GHz, and a reflection loss exceeding 10 dB absorption bandwidth can achieve 3.68 GHz. This indicates that the RGO/NiZn ferrite composite is an excellent and promising microwave absorbent with good absorption property, thin thickness, and wide absorption bandwidth.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancement of responsivity and speed in waveguide Ge/Si avalanche photodiode with separate vertical Ge absorption, lateral Si charge and multiplication configuration

Waveguide-coupled Ge/Si separate absorption, charge and multiplication avalanche photodiodes (SACM APDs) have shown significant potential as high-sensitivity, low-noise, and high-speed photo-detection for optical communications. Here we present a nanoscale single-mode waveguide-integrated vertical Ge absorption, lateral Si charge and single multiplication configuration for a waveguide Ge/Si SACM APD. This device can achieve 90% absorption at 1550 nm wavelengths with a 10 μm-long Ge layer. The device exhibits a seven times reduction in device length compared to conventional waveguide structures and a 29% increase compared to multi-mode interference coupling. Meanwhile, a 3-dB bandwidth can achieve 47 GHz, which is five times higher than the conventional vertical Ge absorption, lateral Si charge and multiplication devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Quasi-static uniaxial compressive experiments were conducted on aluminum foams with a wide range of relative densities (0.134-0.472). The compressive properties and energy absorption capacity were systematically characterized and compared in a more suitable way. The compressive stress instead of compressive strain achieved during energy absorption process was taken into consideration. The results show that aluminum foam is not a kind of energy absorption materials with a stationary plateau region at the plastic deformation stage. There exists a strain hardening phenomenon which makes the stress–strain curve incline at this stage. For every aluminum foam with certain relative density, there exists an optimal stress. Under its optimal stress condition, the foam can absorb the maximum energy compared to foams with whatever different relative densities. The optimal stress and corresponding maximum energy absorption capacity increase with the increase in the foam’s relative density.

36 MATERIALS SCIENCE↗

Maximum wave power absorption by slender bodies of arbitrary cross sections in oblique seas

Published results for the maximum wave power absorption by slender bodies subjected to vertical defor-mations are extended. To this end, a more general form of the Kochin function is derived for floating or submerged slender bodies of arbitrary (asymmetric) cross sections undergoing vertical or horizontal deformations. The Kochin function allows a determination of the theoretical maximum wave power absorption in oblique seas. It is shown that in beam seas, two-dimensional limits can be recovered when the slender body length tends to infinity. This establishes a formal continuity in behavior from atten-uators (head seas) to terminators (beam seas). The wavelike vertical and horizontal deformations of a flexible body, as well as the hinge motions of an articulated raft are also considered in oblique seas. In the former case, results suggest an equivalence between the maximum absorption width of bodies with symmetric cross sections and two degrees of freedom, and that of bodies with optimal cross sections and one degree of freedom. Altogether, the potential for significant wave power absorption from horizontal motions is also demonstrated.

16 TIDAL AND WAVE POWER↗

A microchannel shell-and-tube absorber for ammonia-water absorption

A shell-and-tube absorber with microscale geometric features that yields significant volumetric heat duties is investigated. A vertically-oriented baffled shell-and-tube heat exchanger with a tightly packed tube bundle is designed to serve as the absorber for a 10.5 kW nominal cooling capacity absorption chiller. The heat and mass transfer in this absorber is investigated experimentally at operating conditions spanning a wide range of working fluid and coupling fluid flow rates and ambient temperatures. An experimental facility is fabricated to closely simulate the operating conditions in an absorption refrigeration system. Absorption heat duties in the range of 5-15 kW are measured. In addition to operating the absorber in the baseline co-current flow configuration with premixed inlet, fluid ports are provided to enable operation in counter-current flow, where the dilute solution enters from the top and vapor enters from the bottom. The performance of these two flow configurations is compared. A preliminary heat and mass transfer model is developed to quantify the local temperatures, concentrations, and mass flow rates of the solution and vapor streams along the length of the absorber. The model predictions for total heat duty agree with the experimental results within 10% for almost all the data points, with an AAD of ~3.4%. Finally, the results of this study, along with the modeling framework, can guide further development of highly compact and efficient absorbers absorption systems.

42 ENGINEERING↗

Origin of the background absorption in carbon nanotubes: Phonon-assisted excitonic continuum

Excitonic effects in 1D semiconductors can be qualitatively different from those in higher dimensions. In particular, the Sommerfeld factor, the ratio of the above-band-edge excitonic continuum absorption to free electron-hole pair generation, has been shown to be less than 1 (suppressed) in 1D systems while it is larger than 1 (enhanced) in 2D and 3D systems. Strong continuum suppression indeed exists in semiconducting single-wall carbon nanotubes, a prototypical 1D semiconductor. However, absorption spectra for carbon nanotubes are typically fit with a combination of Lorentzians and a polynomial background baseline with little physical meaning. We performed absorption measurements in aligned single-chirality (6,5) carbon nanotube films. The obtained spectra were fit with our theoretical model obtained by solving the Boltzmann scattering equation involving fifty-nine different types of transitions among three different types of quasiparticles. Specifically, we took into account microscopic interactions between photons, phonons, and excitons, including their dispersions, which unambiguously demonstrated that the background absorption is due to phonon-assisted transitions from the semiconductor vacuum to finite-momentum continuum states of excitons. The excellent agreement we obtained between experiment and theory suggests that our numerical technique can be seamlessly extended to compute strongly out-of-equilibrium many-body dynamics and time-resolved spectra in low-dimensional materials.

36 MATERIALS SCIENCE↗

Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water

The one-dimensional water absorption into cement-based materials, possibly the simplest case of unsaturated water flow playing a fundamental role in predicting mass transport and durability, is still far from being completely understood due to several puzzling anomalies. Considering the water sensitivity of C-S-H gels (swell upon wetting and contract upon drying), a modified Richards equation (MRE) is proposed to quantify the anomalous water absorption into cement-based materials of changing porosity. Consistent experimental tests on a cement mortar and calculations indicate that the MRE with time-decaying water permeability can quantitatively capture the long-term absorption with two linear stages and a nonlinear transition stage between them. The water sensitivity is validated to be responsible for the anomalous deviation of water absorption from the classical square root of time law. It also partially contributes to the anomalous dependence of sorptivity on the temperature-dependent surface tension and viscosity of water and many organic liquids.

36 MATERIALS SCIENCE↗

Fuel-rich n-heptane oxidation: A shock tube and laser absorption study

The chemical kinetics of n-heptane (n-C 7 H 16 ) – an important reference compound for real fuels – oxidation are well studied at stoichiometric and lean conditions. However, there is only limited information on the n-heptane chemical kinetics in fuel-rich combustion. In order to verify the accuracy of chemical kinetic models at these conditions, the oxidation of rich n-heptane mixtures has been investigated. Combustion of n-C 7 H16/O2/Ar mixtures at equivalence ratios, φ, of 2.0 and 3.0 behind reflected shock waves has been studied at temperatures ranging from 1066 to 1502 K and at pressures ranging from 1.4 to 6.2 atm. Reaction progress was monitored by recording pressure and absorption time-histories of ethylene (C 2 H 4 ) and n-heptane at a location 2 cm from the endwall of a 14-cm inner diameter shock tube. Ethylene and n-heptane absorption time-histories were measured, respectively, using absorption spectroscopy at 10.532 μm from a tunable CO 2 laser and at around 3.4 μm from a continuous wave distributed feedback interband cascade laser (ICL). The measured absorption time-histories were compared with modeled predictions from the Lawrence Livermore National Lab (LLNL) detailed n-heptane reaction mechanism. Overall, to the best of our knowledge, current data are the first time-resolved n-heptane and ethylene concentration measurements conducted in a shock tube at these conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analyte-induced spectral filtering in femtosecond transient absorption spectroscopy

Here, we discuss the influence of spectral filtering by samples in femtosecond transient absorption measurements. Commercial instruments for transient absorption spectroscopy (TA) have become increasingly available to scientists in recent years and TA is becoming an established technique to measure the dynamics of photoexcited systems. Furthermore, we show that absorption of the excitation pulse by the sample can severely alter the spectrum and consequently the temporal pulse shape. This “spectral self-filtering” effect can lead to systematic errors and misinterpretation of data, most notably in concentration dependent measurements. Finally, the combination of narrow absorption peaks in the sample with ultrafast broadband excitation pulses is especially prone to this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗