Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Classical Flutter Analysis of X-57 Aircraft Mod II, III, and IV Configurations

To support airworthiness assessment of the X-57 electric propulsion demonstrator aircraft, the National Aeronautics and Space Administration (NASA) completed classical flutter analysis of the Mod II, Mod III, and Mod IV aircraft configurations. Aeroelastic analysis was primarily performed using the ZAERO analysis code developed by Zona Technology. Supplemental computational fluid dynamics (CFD) flutter analysis for the Mod III and Mod IV configurations was performed using NASA’s FUN3D software to verify the aeroelastic behavior at deployed flaps conditions. The NASTRAN finite element models (FEMs) used for aeroelastic analysis were developed by NASA. The final Mod II FEM utilized shell elements for the wing and fuselage, and beam elements for the tail and wing control surfaces. For Mod III and Mod IV aircraft models, shell element wing FEMs developed throughout the Mod III/IV wing design cycle were utilized. The fuselage and empennage FEM components were shared between the Mod II, III, and IV aircraft models. ZAERO analyses predicted flutter boundaries were >60% beyond the X-57 flight-test envelope never exceed airspeed (V NE ) for all configurations. Aeroelastic Reynolds-averaged Navier–Stokes (RANS) CFD simulations using FUN3D of the Mod III/IV configurations predicted flap mode instability did not occur until at least speeds of 60% higher than the Mod III/IV maximum flap deployment airspeed (V FE ).

Keerti K. Bhamidipati↗

Introduction to the NATO AVT-298 Task Group and Development of the SWiFT Configuration

Reynolds number effects are a key development risk for blended wing body aircraft, particularly at high lift take-off and landing conditions. The full scale aerodynamics of these configurations are thought not to be well represented in industry standard low Reynolds number test facilities and the capability to predict Reynolds number effects using computational fluid dynamics or otherwise is not proven. The NATO AVT-298 research task group was established to investigate these issues and this paper sets out the background, motivations and the collaborative approach as well as the development of a new research configuration to serve as a focus for the research. The ‘SWiFT’ configuration, was developed to exhibit flow physics of interest to the AVT-298 research task group and to be suitable for an experimental campaign. The group collaboratively developed the research configuration to be relevant for related blended-wing-body aircraft programmes using computational fluid dynamics and wing design methods and considering the practicalities of testing. This research targets an improvement in our capability to design, optimise and mature future blended wing body aircraft.

SWiFT↗

The Configuration Space Toolkit (C-Space Toolkit or CSTK) Ver. 2.5 beta

The C-Space Toolkit provides a software library that makes it easier to program motion planning, simulation, robotics, and virtual reality codes using the Configuration Space abstraction. Key functionality (1) enables the user to special create representations of movable and stationary rigid geometric objects, and (2) perform fast distance, interference (clash) detection, collision detection, closest-feature pairs, and contact queries in terms of object configuration. Not only can queries be computed at any given point in configuration space, but they can be done exactly over linear-translational path segments and approximately for rotational path segments. Interference detection and distance computations can be done with respect to the Minkowski sum of the original geometry and a piece of convex geometry. The Toolkit takes as raw model input (1) collections of convex polygons that form the boundaries of models and (2) convex polyhedra, cones, cylinders, and discs that are models and model components. Configurations are given in terms of homogeneous transforms. A simple OpenGL-based system for displaying and animating the geometric objects is included in the implementation. This version, 2.5 Beta, incorporates feature additions and enhancements, improvements in algorithms, improved robustness, bug fixes and cleaned-up source code, better compliance with standards and recent programming convention, changes to the build process for the software, support for more recent hardware and software platforms, and improvements to documentation and source-code comments.

Chen, Pang-Chieh↗

Actively controlling coolant-cooled cold plate configuration

Cooling apparatuses are provided to facilitate active control of thermal and fluid dynamic performance of a coolant-cooled cold plate. The cooling apparatus includes the cold plate and a controller. The cold plate couples to one or more electronic components to be cooled, and includes an adjustable physical configuration. The controller dynamically varies the adjustable physical configuration of the cold plate based on a monitored variable associated with the cold plate or the electronic component(s) being cooled by the cold plate. By dynamically varying the physical configuration, the thermal and fluid dynamic performance of the cold plate are adjusted to, for example, optimally cool the electronic component(s), and at the same time, reduce cooling power consumption used in cooling the electronic component(s). The physical configuration can be adjusted by providing one or more adjustable plates within the cold plate, the positioning of which may be adjusted based on the monitored variable.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Analysis of Radiant Cooling System Configurations Integrated with Cooling Tower for Different Indian Climatic Zones

Radiant cooling system has proven to be a low energy consumption system for building cooling needs. This study describes the use of cooling tower in radiant cooling system to improve the overall system efficiency. A comprehensive simulation feasibility study of the application of cooling tower in radiant cooling system was performed for the fifteen cities in different climatic zones of India. It was found that in summer, the wet bulb temperature (WBT) of the different climatic zones except warm-humid is suitable for the integration of cooling tower with radiant cooling system. In these climates, cooling tower can provide on average 24 C to 27 C water In order to achieve the energy saving potential, three different configurations of radiant cooling system have been compared in terms of energy consumption. The different configurations of the radiant cooling system integrated with cooling tower are: (1) provide chilled water to the floor, wall and ceiling mounted tubular installation. (2) provide chilled water to the wall and ceiling mounted tabular installation. In this arrangement a separate chiller has also been used to provide chilled water at 16 C to the floor mounted tubular installation. (3) provide chilled water to the wall mounted tabular installation and a separate chiller is used to provide chilled water at 16 C to the floor and ceiling mounted tabular installation. A dedicated outdoor air system is also coupled for dehumidification and ventilation in all three configurations. A conventional all-air system was simulated as a baseline to compare these configurations for assessing the energy saving potential.

Mathur, Jyotirmay↗

Configuration of a software defined network

The present disclosure pertains to systems and method for configuration of communication flows in a software defined network (“SDN”). In one embodiment, a system is operable to configure a communication flow between a first host and a second host. A mode selection subsystem is configured to cause a plurality of network devices in a network connecting the first communication host and the second communication host to transition between an open mode and an SDN operating mode. In the open mode, the network devices may discover a communication path between the first host and the second host. An analysis subsystem may receive information from the plurality of network devices information about the discovered path, and a topology discovery subsystem may be configured to create a communication flow corresponding to the discovered path. The communication flow may allow communication between the first host and the second host in the SDN operating mode.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtual model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.

42 ENGINEERING↗

Concealed configuration mixing and shape coexistence in the platinum nuclei

The role of configuration mixing in the Pt region is investigated. The nature of the ground state changes smoothly, being spherical around mass A{approx} 174 and A{approx} 192 and deformed around the mid-shell N= 104 region. Interacting Boson Model with configuration mixing calculations are presented for deformations and isotope shifts. The assumption of the existence of two configurations with very different deformation provides a simple framework to explain the observed isotope shifts systematics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Global optimization of multicomponent distillation configurations: 2. Enumeration based global minimization algorithm

We present a general Global Minimization Algorithm (GMA) to identify basic or thermally coupled distillation configurations that require the least vapor duty under minimum reflux conditions for separating any ideal or near-ideal multicomponent mixture into a desired number of product streams. In this algorithm, global optimality is guaranteed by modeling the system using Underwood equations and reformulating the resulting constraints to bilinear inequalities. The speed of convergence to the globally optimal solution is increased by using appropriate feasibility and optimality based variable-range reduction techniques and by developing valid inequalities. As a result, the GMA can be coupled with already developed techniques that enumerate basic and thermally coupled distillation configurations, to provide for the first time, a global optimization based rank-list of distillation configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Anomalous Electron Configuration Among 3d Transition Metal Atoms

Physical properties of materials are mainly determined by valence electron configurations, where different valence shells would induce divergent phenomena. In compounds containing Sc 2+ , 3d electron occupancy is expected, same as other transition metal atoms like Ti 3+ . But this situation still awaits experimental verification. In this work, we selected ScS to measure the valence electron density and orbital population of Sc2+ through delicate quantitative convergent-beam electron diffraction. Though the [Ar]3d 1 configuration is confirmed in ionic Sc 2+ , the unintuitive occupation of 4s orbital is concluded with the absence of 3d orbital features around Sc-atom sites and nearly bare population of t2g orbital. It should be the first time to report this special electron configuration in a transition metal compound, in which 4s rather than 3d orbital is preferred. Our findings reveal the distinct behavior of Sc, and probable ways to modulate material properties by controlling electron orbitals.

36 MATERIALS SCIENCE↗

Theoretical energy level spectra and transition data for 4p{sup 6}4d, 4p{sup 6}4f and 4p{sup 5}4d{sup 2} configurations of W{sup 37+} ion

The ab initio quasirelativistic Hartree-Fock method developed specifically for the calculation of spectral parameters of heavy atoms and highly charged ions was applied to determine atomic data for tungsten ions. The correlation effects were included by adopting the configuration interaction method. The Breit-Pauli approximation for quasirelativistic Hartree-Fock radial orbitals was employed to take into account relativistic effects. The energy level spectra, radiative lifetimes, Lande factors g were calculated for the 4p{sup 6}4d, 4p{sup 6}4f and 4p{sup 5}4d{sup 2} configurations of W{sup 37+} ion. The atomic data, namely, the transition wavelengths, spontaneous emission rates and oscillator strengths for the electric dipole, electric quadrupole and magnetic dipole transitions among and within the levels of these configurations are tabulated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Theoretical energy level spectra and transition data for 4p{sup 6}4d{sup 2}, 4p{sup 6}4d4f, and 4p{sup 5}4d{sup 3} configurations of W{sup 36+}

The ab initio quasirelativistic Hartree–Fock method developed specifically for the calculation of spectral parameters of heavy atoms and highly charged ions is used to derive transition data for a multicharged tungsten ion. The configuration interaction method is applied to include electron correlation effects. The relativistic effects are taken into account in the Breit–Pauli approximation for quasirelativistic Hartree–Fock radial orbitals. The energy level spectra, radiative lifetimes and Lande g-factors are calculated for the 4p{sup 6}4d{sup 2}, 4p{sup 6}4d4f, and 4p{sup 5}4d{sup 3} configurations of the ion W{sup 36+}. The transition wavelengths, spontaneous transition probabilities, oscillator strengths, and line strengths for the electric dipole, electric quadrupole, electric octupole, and magnetic dipole transitions among the levels of these configurations are tabulated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Relativistic configuration-interaction calculations of electric dipole n=2−n=3 transitions for medium-charge Li-like ions

In this work, the multi-configuration Dirac–Fock and relativistic configuration-interaction methods have been used to calculate the transition wavelengths, electric dipole transition probabilities, line strengths, and absorption oscillator strengths for the 2s–3p, 2p–3s, and 2p–3d transitions in Li-like ions with nuclear charge Z=7–30. Our calculated values are in good agreement with previous experimental and theoretical results. We took the contributions from Breit interaction, finite nuclear mass corrections, and quantum electrodynamics corrections to the initial and final levels into account, and also found that the contributions from Breit interaction, self-energy, and vacuum polarization grow fast with increasing nuclear charge for a fixed configuration. The ratio of the velocity to length form of the transition rate (A{sub v}/A{sub l}) was used to estimate the accuracy of our calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A configurational force for adaptive re-meshing of gradient-enhanced poromechanics problems with history-dependent variables

Here, we introduce a mesh-adaption framework that employs a multi-physical configurational force and Lie algebra to capture multiphysical responses of fluid-infiltrating geological materials while maintaining the efficiency of the computational models. To resolve sharp gradients of both displacement and pore pressure, we introduce an energy-estimate-free re-meshing criterion by extending the configurational force theory to consider the energy dissipation due to the fluid diffusion and the gradient-dependent plastic flow. To establish new equilibria after remeshing, the local tensorial history-dependent variables at the integration points are first decomposed into spectral forms. Then, the principal values and directions are projected onto smooth fields interpolated by the basis function of the finite element space via the Lie-algebra mapping. Our numerical results indicate that this Lie algebra operator in general leads to a new trial state closer to the equilibrium than the ones obtained from the tensor component mapping approach. A new configurational force for dissipative fluid-infiltrating porous materials that exhibit gradient-dependent plastic flow is introduced such that the remeshing may accommodate the need to resolve the sharp pressure gradient as well as the strain localization. The predicted responses are found to be not influenced by the mesh size due to the micromorphic regularization, while the adaptive meshing enables us to capture the width of deformation bands without the necessity of employing fine mesh everywhere in the domain.

42 ENGINEERING↗

Adsorption of Water Monomer and Clusters on Platinum(111) Terrace and Related Steps and Kinks I. Configurations, Energies, and Hydrogen Bonding

Adsorption and rotation of water monomer, dimer, and trimer on the (111) terrace, (221) and (322) stepped, and (763) and (854) kinked surfaces of platinum were studied by density functional theory calculations using the PW91 approximation to the energy functional. On the (111) terrace, water monomer and the donor molecule of the dimer and trimer adsorb at atop sites. The permolecule adsorption energies of the monomer, dimer, and trimer are 0.30, 0.45, and 0.48 eV, respectively. Rotation of monomers, dimers, and trimers on the terrace is facile with energy barriers of 0.02 eV or less. Adsorption on steps and kinks is stronger than on the terrace, as evidenced by monomer adsorption energies of 0.46 to 0.55 eV. On the (221) stepped surface the zigzag extended configuration is most stable with a per-molecule adsorption energy of 0.57 eV. On the (322) stepped surface the dimer, two configurations of the trimer, and the zigzag configuration have similar adsorption energies of 0.55 ± 0.02 eV. Hydrogen bonding is strongest in the dimer and trimer adsorbed on the terrace, with respective energies of 0.30 and 0.27 eV, and accounts for their increased adsorption energies relative to the monomer. Hydrogen bonding is weak to moderate for adsorption at steps, with energies of 0.04 to 0.15 eV, as the much stronger water-metal interactions inhibit adsorption geometries favorable to hydrogen bonding. Correlations of hydrogen bond angles and energies with hydrogen bond lengths are presented. On the basis of these DFT/PW91 results, a model for water cluster formation on the Pt(111) surface can be formulated where kink sites nucleate chains along the top of step edges, consistent with the experimental findings of Morgenstern et al., Phys. Rev. Lett., 77 (1996) 703.

08 HYDROGEN↗

Target Configuration Effect on Microstructures and Properties of Vertically Aligned Nanocomposites

Vertically aligned nanocomposites (VANs) are unique thin films with vertical nanostructures embedded in a matrix material, allowing for the integration of two distinct materials. These nanocomposites offer novel combined physical properties, such as nanocomposite-based multiferroics and strongly coupled physical properties, such as magneto-optic coupling. Much work has been conducted in exploring different two-phase combinations and various processing conditions to achieve novel tunable properties that cannot be obtained by any single-phase material alone. Here, in this work, the target configuration effects are explored for the growth of LaFeO 3 –CoNi 2 O 4 VANs. Both mixed and pie-shaped targets are utilized to compare the target configuration effects on the phase separation, morphology tuning, and their resulting physical properties, including optical and magnetic properties. This work suggests that the target configuration is another important parameter for achieving the desired VAN morphology and can be used to design different two-phase VANs with tailorable properties.

36 MATERIALS SCIENCE↗

Modifying Frank–Kasper Mesophases by Modulating Chain Configuration in PDMS- b -PTFEA Copolymers

The common spherical mesophases observed from chemically distinct compounds have promoted extensive studies of packing structures in soft-matter self-assemblies. In this report we present a new approach for controlling sphere-packing phases by modulating homologous copolymer chain configurations. To this end, three sets of sample pairs, compositionally asymmetric polydimethylsiloxane-b-poly(2,2,2-trifluoroethyl acrylate) (PDMS-b-PTFEA) diblock copolymers (diBCPs) and their homologues containing the corresponding triblock copolymer (triBCP), are synthesized via atom transfer radical polymerization and designed with the consistent volume fractions of the core-forming PTFEA block, f PTFEA = 0.20, 0.18, and 0.15. We identify the formation of C15 and hexagonally close-packed (HCP) phases in the triBCP-containing PDMS-b-PTFEAs, whereas the sigma and C14 phases are formed in their diBCP analogues, respectively. These phase shifts into C15 and HCP, due to molecular configuration differences, reveal a significant yet unrealized role of chain configurations and the associated chain size effects in determining the stable sphere-packing phases in BCP systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the Molecular Configuration of Perylene Diimide Acceptors on Charge Transfer and Device Performance

Three perylene diimides (PDI)-based small molecules, T2-SePDI2, T3B-SePDI3, and T4B-SePDI4, with different molecular configurations are synthesized. Due to a large steric hindrance, the molecular configuration of T3B-SePDI3 is the most distorted, followed by T4BSePDI4, while T2-SePDI2 shows the smallest steric hindrance. Inverted bulk heterojunction solar cells based on T3B-SePDI3 and PBDB-T show the highest power conversion efficiency (PCE) of 5.82% with an open-circuit voltage of 0.98 V, a high short-circuit current density of 10.52 mA/cm2, and a fill factor of 56.31%. The PCEs of the T2-SePDI2- and T4B-SePDI4- based devices are 4.10% and 5.10%, respectively. Furthermore, the results demonstrate that the molecular configuration of the PDI-based small molecule acceptor is critical and that increasing the steric hindrance is helpful in suppressing aggregation and improving device performance.

14 SOLAR ENERGY↗