Search NASA⌕ Search

SEARCH · Search NASA

Results for “Closed form solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Characterization of ceramic fuel powder packing fractions to support INFLUX

Triply periodic minimal surface (TPMS)-based structures show marked potential in novel nuclear reactor fuel designs, as their high surface area-to-volume ratio increases the efficiency of heat transfer out of the fuel, enabling safer, more innovative reactor designs. This milestone report addresses the role of dUO 2 powder processing route on the fill behavior of TPMS-based cladding shells to understand and advance the feasibility of manufacturing TPMS-based nuclear fuel forms. dUO 2 powder was processed through either a dry granulation route, varying consolidation pressure, or through milling, varying milling time, milling method and milled size distribution. The lowest tapped bulk densities (TBD), but best powder flowabilities, were obtained when testing unprocessed dUO 2 powder which was prone to self-agglomeration and formed low-density spheroids. The highest TBD and lowest flowabilities were obtained when using powder produced by hammer-milling dUO 2 powder to pass through a 200-mesh sieve, which led to particles with angular morphologies. Powder produced by dry granulation exhibited TBD that varied according to the consolidation pressure used to form the initial pellets and exhibited improved flowabilities when compared to hammer-milled material. Because of the large span of granule sizes formed as well as the irregular shape associated with the granules, a packing fraction of 0.69 was achieved, exceeding the analytical solution for random close packing of mono-sized spheres. TPMS polymer shells were loaded with unprocessed, granulated, and hammer-milled dUO 2 powders, and their qualitative packing behaviors were analyzed using x-ray computed tomography (xCT). TBDs calculated after loading TPMS polymer shells were 10-20% lower when compared to tapped bulk density measurements taken in a glass graduated cylinder, indicating a non-trivial impact on the tapped bulk density of either the TPMS channel size, TPMS channel surface material, powder cohesiveness, or a combination of the two parameters. A metallic zircaloy-4 TPMS shell will be loaded with hammer-milled dUO 2 powder upon receipt of the shell from Oak Ridge National Laboratory (ORNL) and shipped to Idaho National Labs (INL) for subsequent hot isostatic pressing (HIP) densification experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1971

Thermoelastic damping and its effect on flutter of stressed panels situated in a supersonic airflow

The effects of material damping on flutter of stressed rectangular panels are studied within the context of linear thermoelasticity theory. The closed-form expression for the thermoelastic (material) damping coefficient is obtained as a function of frequency, panel temperature and dimensions, and material properties. The solution of the stability boundary value problem is obtained by use of a generalized Galerkin method in the cross stream direction which reduces the governing partial differential equations to a system of ordinary differential equations in the streamwise direction. These equations are then solved exactly. Numerical results are given for the thermoelastic damping coefficients and for the flutter speeds of partially and fully clamped panels subjected to midplane stress.

Shieh, R. C.↗
NASA NTRS1973

The partially closed Griffith crack

A solution is presented for a Griffith crack subjected to an arbitrary polynomial loading function which causes one end of the crack to remain closed. Closed form expressions are presented for the crack opening length and for the stress and displacements in the plane of the crack. The special case of pure bending is presented as an example and for this case the stress intensity factor is computed.

Thresher, R. W.↗
NASA NTRS1974

Steady simple shear flow past a circular cylinder at moderate Reynolds numbers - A numerical solution

The two-dimensional steady flow of an incompressible viscous fluid past a circular cylinder, placed symmetrically in a simple shear field, has been studied for both the stationary and the freely rotating case by solving numerically the Navier-Stokes equations for values of the Reynolds number R in the range from 0.047 to 70. At R = 0.047, the results obtained are in substantial agreement with the analytic small-R perturbation solution given by Robertson and Acrivos (1970). Inertia effects were found, however, to play a significant role even at R = 1, and hence the calculated flow pattern for R greater than or equal to 1 differs significantly from that of the creeping-flow solution. Specifically, for the freely rotating case, the region of closed streamlines decreases rapidly in extent with increasing R, two symmetrically placed wakes are formed on either side of the cylinder, and the dimensionless rotational speed of the freely suspended cylinder decreases as the reciprocal of the square root of R.

Kossack, C. A.↗
NASA NTRS1985

Exact spacecraft detumbling and reorientation maneuvers with gimbaled thrusters and reaction wheels

The equations of rotational motion for a spacecraft equipped with external jets and internal reaction wheels are shown to be feedback-equivalent to those of a linear system in attitude parameter space. Reorientation maneuvers are thereby formulated as linear optimal control problems with least mean square acceleration in attitude parameter space, solved in closed form and implementable either with internal or external torque commands, the choice depending on power and throttling requirements. For prior detumbling, an alternative solution with least mean square torque by angular momentum feedback is also given, that is implementable with gimbaled pairs of thrusters at constant throttle. Such a detumbling maneuver may then be followed by an acceleration-commanded rest-to-rest maneuver by means of the reaction wheels.

Dwyer, T. A. W., III↗
DOE OSTI2022

Experimental Determination of the Relationship Between Organic Aerosol Viscosity and Ice Nucleation at Upper Free Tropospheric Conditions

Abstract This work presents measurements of the ice nucleating ability of secondary organic material recorded between −40 and −70°C and relative humidity with respect to ice (RH ice ) between 150% and 220%. For a subset of systems, temperature and humidity dependence of particle viscosity as well as dry glass transition temperature were characterized using the dual tandem differential mobility analyzer method. Eleven unique monoterpene, sesquiterpene and aromatic precursors were used to generate secondary organic material (SOM) using either an oxidation flow reactor (OFR) or an environmental chamber (EC). For the SOM for which viscosity was measured, the particle glass transition temperatures varied between 6 and 23°C ( n = 8). Measurements were performed to verify that increased relative humidity did not plasticize the particles below −10°C at residence times similar to those in the ice nucleation instrument. No heterogeneous ice nucleation was observed at the ∼0.5% onset threshold for any of the materials generated. The ice nucleation occurs by the freezing of SOM solution droplets consistent with homogeneous freezing indicating that they form an aqueous solution, or the SOM particles required water saturation to freeze, indicating that they were hydrophobic. Experiments exploring the influence of functional groups and mass loading did not reveal any obvious influence of particle chemistry or generation conditions on the results. Close structural matches between known organic ice nucleating particles as precursor or formed products did not yield materials that promoted freezing. These experiments suggest that heterogeneous ice formation of glassy secondary organic materials is likely uncommon under upper free tropospheric conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1958

Application of the Method of Coordinate Perturbation to Unsteady Duct Flow

The method of coordinate perturbation is applied to the unsteady flow of a compressible fluid in ducts of variable cross section. Solutions, in the form of perturbation series, are obtained for unsteady flows in ducts for which the logarithmic derivative of area variation with respect to the space coordinate is a function of the 'smallness' parameter of the perturbation series. This technique is applied to the problem of the interaction of a disturbance and a shock wave in a diffuser flow. It is found that, for a special choice of the function describing the disturbance, the path of the shock wave can be expressed in closed form to first order. The method is then applied to the determination of the flow field behind a shock wave moving on a prescribed path in the x,t-plane. Perturbation series solutions for quite general paths are developed. The perturbation series solutions are compared with the more exact solutions obtained by the application of the method of characteristics. The approximate solutions are shown to be in reasonably accurate agreement with the solutions obtained by the method of characteristics.

Himmel, Seymour C.↗
DOE OSTI2023

Irradiation-enhanced Interactions at UO 2 /Al 2 O 3 /Al Interfaces

Combustion synthesis is used to prepare thin UO 2 films on aluminum alloy substrates. This simple preparation method involves electrospraying uranyl nitrate + acetylacetone + 2-methoxyethanol solution on the substrate, followed by a short annealing at 350 or 550 °C. The irradiation of films with a 40 Ar 2+ ion beam (energy of 1.7 MeV and fluences of 7.7 × 10 16 and 1.3 × 10 17 ions/cm 2 ) is conducted to investigate irradiation-induced restructuring processes. High-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) investigations show that the annealing temperature significantly influences the crystallinity and stability of materials during irradiation. A small amount of Mg in the alloy substrate diffuses into the amorphous Al 2 O 3 interfacial layer between the film and the substrate. Local thermal spikes from the incoming ions facilitate the irradiation-induced mixing of immiscible Al 2 O 3 and UO 2 for the materials prepared at 350 °C. This mass diffusion produces relatively large cavities at the interface. Selective diffusion of a more significant amount of Mg for the materials prepared at 550 °C suppresses the mixing of the Al 2 O 3 interlayer with the film but forms Mg y U 1–y O 2±x solid solutions during irradiation. Local thermal heating triggers the precipitation of a discontinuous crystalline MgO layer close to the film surface. As a result, the enhanced and selective diffusion of Mg into the film makes the materials prepared at 550 °C more robust and mechanically stable than those prepared at 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Spatial Resolution Estimation of LANDSAT-4 Thematic Mapper Data

The problem of estimating the overall point-spread function (PSF) of multispectral scanner systems was studied using real scene data and known geometric structures in the scene. A direct solution to an approximate form of the PSF was made along with a method using the derivative of an estimated edge response. Both results agreed closely. The TM scanner system specifications are given in line-spread function width and these values are listed with the experimental results in terms of meters. The estimated values are very reasonable, considering the number of factors which could be influencing the result. The atmosphere will have a blurring effect on the overall PSF as well as on cubic convolution resampling effects and possible electronic effects not accounted for in the specification. Also, the specific definition of the LSF specification is not known nor is the actual altitude at the instant the data were acquired. Thus the nominal overall PSF half-amplitude width of 39 m is reasonable; however, a greater sample of scene objects should be evaluated to furthur verify this result.

Mcgillem, C. D.↗
NASA NTRS1986

Electrochemical Process Makes Fine Needles

Electrochemical process makes fine tungsten needles for use as microscopic probes or field-emission cathodes. Etching vessel filled with dense, inert lower liquid covered by less-dense, caustic etching solution. Newly formed needle breaks off upper part of wire in etchant and falls into can in inert liquid below. Improved process does not require close monitoring and left unattended for an indefinite time.

Watkins, J. L.↗
NASA NTRS1992

Gravitational influences on the behavior of confined diffusion flames

Closed form, mathematical representations for the shapes of laminar diffusion flames stabilized on two-dimensional slot burners are derived for arbitrary gravitational levels. The solution technique employs the Schvab-Zeldovich conserved species variable. Effects of gravity on the velocity field are incorporated through the momentum equation; these effects, in turn, influence the species field. The results reduce smoothly to the classical Burke-Schumann solution as gravity approaches zero. It is shown that both flame height and width increase with decreasing gravity levels. Several interesting cases are considered explicitly; these include effects of negative and extremely high values of gravity. In the latter case, it is shown that the flame collapses onto the burner surface. The analysis finds application in the modeling of steady and unsteady gas and solid propellant diffusion flames.

Hegde, U.↗
NASA NTRS1992

Effect of the geomagnetic field on the diffusion of meteor trains

A solution to the problem of the diffusion of a meteor train in the geomagnetic field from an initial line density may be written in closed form in terms of effective diffusion coefficients depending on direction, enabling detailed calculations across the entire range of angle of train to field and relevant heights. While the effective diffusion coefficient in the plane of train and field then remains close to the zero field ambipolar value right up to 90 deg, the effective coefficient in the direction of the normal to plane of train and field drops steadily to its theta = 0 value at theta = 90 deg. At 95 km this corresponds to a change of almost 5 km, in 'diffusion height', that is, the height of an underdense meteor calculated on the basis of the exponential decay of its radar echo. We have estimated the consequent changes in the expected distribution of diffusion heights for various orientations of radar antenna and find the dependence on azimuth is very marked. The effect of the field is relatively minor for a south pointing beam but very strong if the beam is pointing north.

Jones, William↗
NASA NTRS1993

State-constrained booster trajectory solutions via finite elements and shooting

This paper presents an extension of a FEM formulation based on variational principles. A general formulation for handling internal boundary conditions and discontinuities in the state equations is presented, and the general formulation is modified for optimal control problems subject to state-variable inequality constraints. Solutions which only touch the state constraint and solutions which have a boundary arc of finite length are considered. Suitable shape and test functions are chosen for a FEM discretization. All element quadrature (equivalent to one-point Gaussian quadrature over each element) may be done in closed form. The final form of the algebraic equations is then derived. A simple state-constrained problem is solved. Then, for a practical application of the use of the FEM formulation, a launch vehicle subject to a dynamic pressure constraint (a first-order state inequality constraint) is solved. The results presented for the launch-vehicle trajectory have some interesting features, including a touch-point solution.

Bless, Robert R.↗
DOE OSTI2023

Domain crossover in the reductase subunit of NADPH-dependent assimilatory sulfite reductase

NADPH-dependent assimilatory sulfite reductase (SiR) from Escherichia coli performs a six-electron reduction of sulfite to the bioavailable sulfide. SiR is composed of a flavoprotein (SiRFP) reductase subunit and a hemoprotein (SiRHP) oxidase subunit. There is no known high-resolution structure of SiR or SiRFP, thus we do not yet fully understand how the subunits interact to perform their chemistry. Here, we used small-angle neutron scattering to understand the impact of conformationally restricting the highly mobile SiRFP octamer into an electron accepting (closed) or electron donating (open) conformation, showing that SiR remains active, flexible, and asymmetric even with these conformational restrictions. From these scattering data, we then model the first solution structure of SiRFP. Further, computational modeling of the N-terminal 52 amino acids that are responsible for SiRFP oligomerization suggests an eight-helical bundle tethers together the SiRFP subunits to form the SiR core. Finally, mass spectrometry analysis of the closed SiRFP variant show that SiRFP is capable of inter-molecular domain crossover, in which the electron donating domain from one polypeptide is able to interact directly with the electron accepting domain of another polypeptide. This structural characterization suggests that SiR performs its high-volume electron transfer through both inter- and intramolecular pathways between SiRFP domains and, thus, cis or trans transfer from reductase to oxidase subunits. Such highly redundant potential for electron transfer makes this system a potential target for designing synthetic enzymes.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2002

High-Fidelity Micromechanics Model Developed for the Response of Multiphase Materials

A new high-fidelity micromechanics model has been developed under funding from the NASA Glenn Research Center for predicting the response of multiphase materials with arbitrary periodic microstructures. The model's analytical framework is based on the homogenization technique, but the method of solution for the local displacement and stress fields borrows concepts previously employed in constructing the higher order theory for functionally graded materials. The resulting closed-form macroscopic and microscopic constitutive equations, valid for both uniaxial and multiaxial loading of periodic materials with elastic and inelastic constitutive phases, can be incorporated into a structural analysis computer code. Consequently, this model now provides an alternative, accurate method.

Aboudi, Jacob↗
NASA NTRS2007

Analytical Approach for Estimating Preliminary Mass of ARES I Crew Launch Vehicle Upper Stage Structural Components

In January 2004, President Bush gave the National Aeronautics and Space Administration (NASA) a vision for Space Exploration by setting our sight on a bold new path to go back to the Moon, then to Mars and beyond. In response to this vision, NASA started the Constellation Program, which is a new exploration launch vehicle program. The primary mission for the Constellation Program is to carry out a series of human expeditions ranging from Low Earth Orbit to the surface of Mars and beyond for the purposes of conducting human exploration of space, as specified by the Vision for Space Exploration (VSE). The intent is that the information and technology developed by this program will provide the foundation for broader exploration activities as our operational experience grows. The ARES I Crew Launch Vehicle (CLV) has been designated as the launch vehicle that will be developed as a "first step" to facilitate the aforementioned human expeditions. The CLV Project is broken into four major elements: First Stage, Upper Stage Engine, Upper Stage (US), and the Crew Exploration Vehicle (CEV). NASA's Marshall Space Flight Center (MSFC) is responsible for the design of the CLV and has the prime responsibility to design the upper stage of the vehicle. The US is the second propulsive stage of the CLV and provides CEV insertion into low Earth orbit (LEO) after separation from the First Stage of the Crew Launch Vehicle. The fully integrated Upper Stage is a mix of modified existing heritage hardware (J-2X Engine) and new development (primary structure, subsystems, and avionics). The Upper Stage assembly is a structurally stabilized cylindrical structure, which is powered by a single J-2X engine which is developed as a separate Element of the CLV. The primary structure includes the load bearing liquid hydrogen (LH2) and liquid oxygen (LOX) propellant tanks, a Forward Skirt, the Intertank structure, the Aft Skirt and the Thrust Structure. A Systems Tunnel, which carries fluid and electrical power functions to other Elements of the CLV, is included as secondary structure. The MSFC has an overall responsibility for the integrated US element as well as structural design an thermal control of the fuel tanks, intertank, interstage, avionics, main propulsion system, Reaction Control System (RCS) for both the Upper Stage and the First Stage. MSFC's Spacecraft and Vehicle Department, Structural and Analysis Design Division is developing a set of predicted mass of these elements. This paper details the methodology, criterion and tools used for the preliminary mass predictions of the upper stage structural assembly components. In general, weight of the cylindrical barrel sections are estimated using the commercial code Hypersizer, whereas, weight of the domes are developed using classical solutions. HyperSizer is software that performs automated structural analysis and sizing optimization based on aerospace methods for strength, stability, and stiffness. Analysis methods range from closed form, traditional hand calculations repeated every day in industry to more advanced panel buckling algorithms. Margin-of-safety reporting for every potential failure provides the engineer with a powerful insight into the structural problem. Optimization capabilities include finding minimum weight panel or beam concepts, material selections, cross sectional dimensions, thicknesses, and lay-ups from a library of 40 different stiffened and sandwich designs and a database of composite, metallic, honeycomb, and foam materials. Multiple different concepts (orthogrid, isogrid, and skin stiffener) were run for multiple loading combinations of ascent design load with and with out tank pressure as well as proof pressure condition. Subsequently, selected optimized concept obtained from Hypersizer runs was translated into a computer aid design (CAD) model to account for the wall thickness tolerance, weld land etc for developing the most probable weight of the components. The flow diram summarizes the analysis steps used in developing these predicted mass.

Aggarwal, Pravin↗
DOE OSTI2022

SMALE: Enhancing Scalability of Machine Learning Algorithms on Extreme-Scale Computing Platforms

Deployment and execution of machine learning tasks on extreme-scale computing platforms face several significant technical challenges: 1) High computing cost incurred by dense networks – The computing workload of deep networks with densely-connected topology increases rapidly with the network size, imposing a non-scalable computing model of extreme-scale computing platforms; 2) Non-optimized workload distribution – Many advanced deep learning algorithms, e.g., sparsification and irregular net-work topology, produce very unbalanced workload distribution on extreme-scale computing platforms. The computation efficiency is greatly hindered by the incurred data and computation redundancies as well as long tails of the node with extensive workload; 3) Constraints in data movement and I/O bottle-neck – Inter-node data movement in extreme-scale computing platforms are associated with high energy and latency costs, and subject to the constraints of I/O bandwidth; and 4) Generalization of algorithm realization and acceleration on computing platforms – The large varieties of machine learning algorithms and structures of extreme-scale computing platforms make the derivation of a generalized algorithm realization and acceleration method very challenging, which, however, is the requirement by domain scientists and interested users. We call the above challenges Smale’s Problems in Machine Learning and Understanding for High-Performance Computing Scientific Discovery. The objective of our three-year research project is to develop a holistic innovation set at structure, assembly, and acceleration layers of machine learning algorithms to address the above challenges in algorithm deployment and execution. Three tasks are particularly performed, including: At the algorithm structure level, we investigate the techniques that can structurally sparsify on the topology of deep networks for computing workload reduction. We also study clustering and pruning techniques that can optimize the workload distributions over the extreme-scale computing platforms; At the algorithm assembly level, we derive a unified learning framework for unsupervised transfer learning and dynamic growing capabilities. Novel training methods are also exploited to enhance the training efficiency of the proposed framework; At the algorithm acceleration level, we will develop a series of techniques that can accelerate the computation of sparse matrix operations, which are one of the core executions in deep learning and optimize memory access of the concerned platforms. Our proposed techniques attack the fundamental problems in machine learning algorithms running on extreme-scale computing platforms by vertically integrating the solutions at three closely entangled layers, paving the long-term scaling path of machine learning applications under DOE context. Three tasks corresponding to the above respective research orientations are performed during the three-year project period with our collaborators at ORNL. The outcome of the proposed project is anticipated to form a holistic solution set of novel algorithms and network topologies, efficient training techniques, and fast acceleration methods to promote the computing scalability of the machine learning applications of particular interest to DOE.

97 MATHEMATICS AND COMPUTING↗