Search NASA⌕ Search

SEARCH · Search NASA

Results for “Connected Component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Major element composition controls rare earth element solubility during leaching of coal fly ash and coal by-products

Coal combustion ash and pre-combustion coal refuse are currently under consideration as potential sources of rare earth elements. One of the early steps in recovering REEs from coal by-products is often acid leaching, which can result in low pH leachates with complex aqueous chemistry. The aim of this work was to understand the connection between REE solubility, pH, and major elemental components of leachates for coal by-products. To accomplish this, we investigated the effects of solids concentration (i.e., pulp density) and pH adjustment on REE solubility in acid leachates of coal fly ashes from the Powder River Basin (PRB) and Appalachian Basin in the United States, and a coal processing refuse from the Southwestern U.S. For PRB ashes, the concentrations of soluble REEs generally increased with increasing pulp density; however, at pulp density values above 80–100 g/L, the soluble REE concentrations in the leachates were markedly lower. Similarly, the soluble concentrations of other major solutes (Fe, Al, Si) that leached from PRB fly ashes were also non-linear with pulp density. These major elements tended to reach maximum concentration values at 60–70 g/L pulp density. In contrast, for the Appalachian fly ashes and the coal by-product, soluble concentrations of REE and major elements in leachates increased linearly with pulp density. Chemical equilibria calculations of mineral saturation indices indicated that trends in soluble REE concentrations could be explained by saturation conditions for Fe and Al-(hydr)oxides and possibly sulfate minerals, but not lanthanide hydroxides. Furthermore, pH adjustment of the acid leachates showed that REEs and many major solutes were removed from solution at pH values above 4.5, also consistent with Fe- and Al-(hydr)oxide precipitation. These results highlight the importance of understanding the chemical composition of leachates when designing REE recovery processes for low-grade geologic feedstocks and that precipitation of hydr(oxide) or sulfate minerals of major elements rather than discreet formation of REE mineral phases could be used for process optimization.

01 COAL, LIGNITE, AND PEAT↗

Surface-Attached Molecular Catalysts on Visible-Light-Absorbing Semiconductors: Opportunities and Challenges for a Stable Hybrid Water-Splitting Photoanode

Hybrid photoanodes for water-splitting photoelectrochemical cells (WS-PECs) consist of a visible-light-absorbing semiconductor (VLASC) with a molecular water-oxidation catalyst (mWOC) attached, and show great promise for solar fuel generation. In this perspective, we will focus on the less emphasized but crucial subject of stability in these systems. The stability of each component, including the VLASC, the mWOC, and the connection of the two, must individually be considered, as well as how the system functions as a whole. We offer design strategies for each of these parts, as well as some characterization techniques helpful in the study of degradation. Lastly, we propose some future directions for the development of hybrid WS-PEC photoanodes with long-term stability that could be suitable for practical application.

14 SOLAR ENERGY↗

Formamide-Based Prebiotic Synthesis of Nucleobases: A Kinetically Accessible Reaction Route

Synthesis of nucleobases in nonaqueous environments is an alternative way for the emergence of terrestrial life, which could solve the fundamental problem connected to the hydrolytic instability of nucleic acid components in an aqueous environment. In this contribution, we present a plausible reaction route for the prebiotic synthesis of nucleobases in formamide, which does not require participation of the formamide trimer and aminoimidazole-carbonitrile intermediates. The computed activation energy of the proposed pathway is noticeably higher than that of the HCN-based synthetic route, but it is still feasible under the experimental conditions of the Saladino synthesis. We show that, albeit both the pyrimidine and purine ring formation utilizes the undissociated form of formamide, the dehydration product of formamide, HCN, may also play a key role in the mechanism. The rate determining step of the entire reaction path is the cyclization of the diaza-pentanimine precursor. The subsequent formation of the imidazole ring proceeds with a moderate activation energy. Our calculations thus demonstrate that the experimentally suggested reaction path without the involvement of aminoimidazole-carbonitrile intermediates is also a viable alternative for the nonaqueous synthesis of nucleobases.

Chemistry↗

LONG-TERM PHOTOMETRIC BEHAVIOR OF THE ECLIPSING BINARY GW CEPHEI

New CCD photometry over four successive years from 2005 is presented for the eclipsing binary GW Cep, together with reasonable explanations for the light and period variations. All historical light curves, obtained over a 30 yr interval, display striking light changes, and are best modeled by the simultaneous existence of a cool spot and a hot spot on the more massive cool component star. The facts that the system is magnetically active and that the hot spot has consistently existed on the inner hemisphere of the star indicate that the two spots are formed by (1) magnetic dynamo-related activity on the cool star and (2) mass transfer from the primary to the secondary component. Based on 38 light-curve timings from the Wilson-Devinney code and all other minimum epochs, a period study of GW Cep reveals that the orbital period has experienced a sinusoidal variation with a period and semi-amplitude of 32.6 yr and 0.009 days, respectively. In principle, these may be produced either by a light-travel-time effect due to a third body or by an active magnetic cycle of at least one component star. Because we failed to find any connection between luminosity variability and the period change, that change most likely arises from the existence of an unseen third companion star with a minimum mass of 0.22 M {sub sun} gravitationally bound to the eclipsing pair.

79 ASTRONOMY AND ASTROPHYSICS↗

Error analysis of low-fidelity models for wake steering based on field measurements

The observations collected by two scanning lidars deployed on the roof of a 2.8-MW turbine undergoing a series of imposed yaw offsets are analyzed. The wake lateral displacement detected by the rear-facing lidar correlates well with the yaw offset sensed by the forward-facing lidar. We find that the high-frequency part of the yaw offset signal is connected to wake meandering, whereas the low frequency component is a good predictor for wake displacement due to yaw misalignment. Conditionally averaged wake velocity data for different yaw offsets are used as benchmarks for the validation of a linearized Reynolds-averaged Navier-Stokes and an empirical wake model. A mean error as low as 2% and a good prediction of the wake trajectory are achieved, provided that the wake recovery rate matches the observations.

17 WIND ENERGY↗

Radio fossils, relics, and haloes in Abell 3266: cluster archaeology with ASKAP-EMU and the ATCA

ABSTRACT Abell 3266 is a massive and complex merging galaxy cluster that exhibits significant substructure. We present new, highly sensitive radio continuum observations of Abell 3266 performed with the Australian Square Kilometre Array Pathfinder (0.8–1.1 GHz) and the Australia Telescope Compact Array (1.1–3.1 GHz). These deep observations provide new insights into recently reported diffuse non-thermal phenomena associated with the intracluster medium, including a ‘wrong-way’ relic, a fossil plasma source, and an as-yet unclassified central diffuse ridge, which we reveal comprises the brightest part of a large-scale radio halo detected here for the first time. The ‘wrong-way’ relic is highly atypical of its kind: it exhibits many classical signatures of a shock-related radio relic, while at the same time exhibiting strong spectral steepening. While radio relics are generally consistent with a quasi-stationary shock scenario, the ‘wrong-way’ relic is not. We study the spectral properties of the fossil plasma source; it exhibits an ultrasteep and highly curved radio spectrum, indicating an extremely aged electron population. The larger scale radio halo fills much of the cluster centre, and presents a strong connection between the thermal and non-thermal components of the intracluster medium, along with evidence of substructure. Whether the central diffuse ridge is simply a brighter component of the halo, or a mini-halo, remains an open question. Finally, we study the morphological and spectral properties of the multiple complex radio galaxies in this cluster in unprecedented detail, tracing their evolutionary history.

79 ASTRONOMY AND ASTROPHYSICS↗

Lorentz-violating gravitoelectromagnetism

The well-known analogy between a special limit of general relativity and electromagnetism is explored in the context of the Lorentz-violating standard-model extension. An analogy is developed for the minimal standard-model extension that connects a limit of the CPT-even component of the electromagnetic sector to the gravitational sector. We show that components of the post-Newtonian metric can be directly obtained from solutions to the electromagnetic sector. The method is illustrated with specific examples including static and rotating sources. Some unconventional effects that arise for Lorentz-violating electrostatics and magnetostatics have an analog in Lorentz-violating post-Newtonian gravity. In particular, we show that even for static sources, gravitomagnetic fields arise in the presence of Lorentz violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design and Test of Wendelstein 7-X Water-Cooled Divertor Scraper

Heat load calculations have indicated the possible overloading of the ends of the water-cooled divertor facing the pumping gap beyond their technological limit. The intention of the scraper is the interception of some of the plasma fluxes both upstream and downstream before they reach the divertor surface. The scraper is divided into six modules of four plasma facing components (PFCs); each module has four PFCs hydraulically connected in series by two water boxes (inlet and outlet). A full-scale prototype of one module has been manufactured. Development activities have been carried out to connect the water boxes to the cooling pipes of the PFCs by tungsten inert gas internal orbital welding. This prototype was successfully tested in the GLADIS facility with 17 MW/m2 for 500 cycles. The results of these activities have confirmed the possible technological basis for a fabrication of the water-cooled scraper.

Boscary, J.↗

Plasmon Mapping in Metallic Nanostructures and its Application to Single Molecule Surface Enhanced Raman Scattering: Imaging Electromagnetic Hot-Spots and Analyte Location

A major component of this proposal is to elucidate the connection between optical and electron excitation of plasmon modes in metallic nanostructures. These accomplishments are reported: developed a routine protocol for obtaining spatially resolved, low energy EELS spectra, and resonance Rayleigh scattering spectra from the same nanostructures; correlated optical scattering spectra and plasmon maps obtained using STEM/EELS; and imaged electromagnetic hot spots responsible for single-molecule surface-enhanced Raman scattering (SMSERS).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Embedded Sensors and Controls to Improve Component Performance and Reliability - System Dynamics Modeling and Control System Design

This report documents the current status of the modeling, control design, and embedded control research for the magnetic bearing canned rotor pump being used as a demonstration platform for deeply integrating instrumentation and controls (I&C) into nuclear power plant components. This pump is a highly inter-connected thermo/electro/mechanical system that requires an active control system to operate. Magnetic bearings are inherently unstable system and without active, moment by moment control, the rotor would contact fixed surfaces in the pump causing physical damage. This report details the modeling of the pump rotordynamics, fluid forces, electromagnetic properties of the protective cans, active magnetic bearings, power electronics, and interactions between different dynamical models. The system stability of the unforced and controlled rotor are investigated analytically. Additionally, controllers are designed using proportional derivative (PD) control, proportional integral derivative (PID) control, voltage control, and linear quadratic regulator (LQR) control. Finally, a design optimization problem that joins the electrical, mechanical, magnetic, and control system design into one problem to balance the opposing needs of various design criteria using the embedded system approach is presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modeling of Induction Motors and Variable Speed Drives for Multi-Domain System Simulations Using Modelica and the OpenIPSL Library

This paper introduces an innovative method for characterizing, implementing, and validating both three-phase and single-phase induction motor models, accompanied by a variable speed drive model. The primary goal is to investigate interactions between the electrical power grid and other dynamic domains (e.g., thermofluidic) that impact motor/load drive behavior. Our approach involves establishing a mechanical interface based on a physically meaningful equation linking motor torque/speed to the electrical model in the phasor domain. This allows seamless integration of diverse domain subsystems into a unified multi-domain model using Modelica v4.0.0 and the OpenIPSL library v3.0.1, overcoming co-simulation limitations. The proposed model, which requires only one Modelica-compliant tool for simulation, introduces additional dynamics through the mechanical interface, enabling explicit simulation of load disturbances based on constitutive physics. This deepens our understanding of dynamic interactions between the electrical power domain and other subsystems connected through the motor. We detail the modeled components using mathematical equations and textual descriptions, emphasizing the Modelica modeling approach. Simulation examples validate the implementation, demonstrating the multi-domain modeling capabilities of the newly developed components.

Computer Science↗

Rejuvenating Star Formation Activity in an Early-type Dwarf Galaxy, LEDA 1915372, with Accreted H i Gas

We report a rare astrophysical phenomenon, in which an early-type dwarf galaxy (dE), LEDA 1915372, is accreting gas from a nearby star-forming dwarf galaxy, MRK 0689, and is rejuvenating star formation activity at the center. Both LEDA 1915372 and MRK 0689 have similar brightness of M r = -16.99 and -16.78 mag, respectively. They are located in a small group environment, separated by a sky-projected distance of 20.27 kpc (up to 70 kpc in three dimension), and have a relative line-of-sight radial velocity of 6 km s -1 . The observation of 21 cm emission with the Giant Metrewave Radio Telescope provides strong evidence of interaction between the pair of dwarf galaxies in terms of neutral hydrogen (Hi) morphology and kinematics. In particular, the Hi map reveals that the two galaxies are clearly connected by a gas bridge, and the gas components of both LEDA 1915372 and MRK 0689 share a common direction of rotation. We also find that the Hi emission peak deviates from LEDA 1915372 toward its optical blue plume, suggesting a tidal origin of ongoing central star formation. Our findings provide a new path to the formation of blue-cored dEs.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA/General Electric Engine Component Improvement Program

The Engine Component Improvement (ECI) Program has been initiated in connection with projects designed to reduce the impact of the world-wide energy crisis in the area of aviation. The two parts of the ECI program have the overall objective to identify and quantify the sources and causes of CF6 engine performance deterioration, and to reduce the fuel consumption of CF6 engines through the development and the incorporation of various performance improvement concepts. The CF6 high-bypass turbofan engine was selected as a basis for this effort, since it is expected to be a significant fuel user in commercial revenue service for the next 15 to 20 years. The first part of the ECI program represents the initial step in an effort to achieve a goal of five percent reduction in fuel usage for CF6 engines in the 1979-82 time period. The first performance improvement concept selected is an improved efficiency fan blade. Other improvements are related to a short core exhaust system and an improved high pressure turbine.

Albright, A. J.↗

The fine structure of lightning return stroke wave forms

The paper describes and analyzes the structure of the radiation fields produced just prior to and during the development of the first and subsequent return strokes in lightning discharges to ground. Stroke data are summarized, and the waveforms of the fields are found to contain several features which are quite alike for different strokes in the same discharge and also for different discharges. The possibility of large currents in the upward connecting discharges, the existence of a large submicrosecond component in all return strokes, and the cause of the small second peak and of the large subsidiary peaks in first strokes are discussed. The similarity of subsequent stroke fields within a flash suggests that the currents and velocities of different subsequent strokes in the same discharge are often very nearly the same.

Weidman, C. D.↗

Omnivector Probe Measures Airflow

Problems overcome with development of new omnivector anemometer. Includes cylindrical sensing element with eight strain gages. Gages, connected in two Wheatstone bridges, sense two perpendicular components of flow across cylinder. Designed and tested, has fixed-position sensing element capable of simultaneoulsy measuring steady and unsteady velocity head and flow direction of moving fluid over complete 360-degree angle in two-dimensional flow.

Krause, L.↗

Nearly two-dimensional solutions of Euler's equations

Motivated by a stretched version of the Taylor-Green initial-value problem for the Euler and Navier-Stokes equations, nearly two-dimensional incompressible flows are considered involving a single direction of slow spatial variation. A multiple-scale formulation of the problem leads by contour averaging to a system that determines the slow development in space and time. It is shown that the latter system is equivalent to an axisymmetric problem with nonstandard connection between circulation, cylindrical radius, and angular velocity component. Special solutions of the system in the exact axisymmetric case suggest that near-two-dimensionality is lost in finite time.

Childress, Stephen↗

NASA ground terminal communication equipment automated fault isolation expert systems

The prototype expert systems are described that diagnose the Distribution and Switching System I and II (DSS1 and DSS2), Statistical Multiplexers (SM), and Multiplexer and Demultiplexer systems (MDM) at the NASA Ground Terminal (NGT). A system level fault isolation expert system monitors the activities of a selected data stream, verifies that the fault exists in the NGT and identifies the faulty equipment. Equipment level fault isolation expert systems are invoked to isolate the fault to a Line Replaceable Unit (LRU) level. Input and sometimes output data stream activities for the equipment are available. The system level fault isolation expert system compares the equipment input and output status for a data stream and performs loopback tests (if necessary) to isolate the faulty equipment. The equipment level fault isolation system utilizes the process of elimination and/or the maintenance personnel's fault isolation experience stored in its knowledge base. The DSS1, DSS2 and SM fault isolation systems, using the knowledge of the current equipment configuration and the equipment circuitry issues a set of test connections according to the predefined rules. The faulty component or board can be identified by the expert system by analyzing the test results. The MDM fault isolation system correlates the failure symptoms with the faulty component based on maintenance personnel experience. The faulty component can be determined by knowing the failure symptoms. The DSS1, DSS2, SM, and MDM equipment simulators are implemented in PASCAL. The DSS1 fault isolation expert system was converted to C language from VP-Expert and integrated into the NGT automation software for offline switch diagnoses. Potentially, the NGT fault isolation algorithms can be used for the DSS1, SM, amd MDM located at Goddard Space Flight Center (GSFC).

Tang, Y. K.↗

Liquid-Vapor Equilibrium of Multicomponent Cryogenic Systems

Liquid-vapor and solid-vapor equilibria at low to moderate pressures and low temperatures are important in many solar system environments, including the surface and clouds of Titan, the clouds of Uranus and Neptune, and the surfaces of Mars and Triton. The familiar cases of ideal behavior are limiting cases of a general thermodynamic representation for the vapor pressure of each component in a homogeneous multicomponent system. The fundamental connections of laboratory measurements to thermodynamic models are through the Gibbs-Duhem relation and the Gibbs-Helmholtz relation. Using laboratory measurements of the total pressure, temperature, and compositions of the liquid and vapor phases at equilibrium, the values of these parameters can be determined. The resulting model for vapor-liquid equilibrium can then conveniently and accurately be used to calculate pressures, compositions, condensation altitudes, and their dependencies on changing climatic conditions. A specific system being investigated is CH4-C2H6-N2, at conditions relevant to Titan's surface and atmosphere. Discussed are: the modeling of existing data on CH4-N2, with applications to the composition of Titan's condensate clouds; some new measurements on the CH4-C2H6 binary, using a high-precision static/volumetric system, and on the C2H6-N2 binary, using the volumetric system and a sensitive cryogenic flow calorimeter; and describe a new cryogenic phase-equilibrium vessel with which we are beginning a detailed, systematic study of the three constituent binaries and the ternary CH4-C2H6-N2 system at temperatures ranging from 80 to 105 K and pressures from 0.1 to 7 bar.

Thompson, W. Reid↗