Search NASA⌕ Search

SEARCH · Search NASA

Results for “Decay rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Beam Design for Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisio nal ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Refining a Novel Process Monitoring Method to Safeguard Continuously Cycling Designs Using Isotopic Ratios

In advanced reactor (AR) designs, a common feature is continuous chemical processing and circulation of the nuclear material. This work bridges a significant measurement gap in safeguarding reactors with circulating fuel or continuous refueling by leveraging and building on the isotope ratio method first developed by our team under an FY21 Advanced Reactors International Safeguards Engagement (ARISE) project (Uribe et al. 2021). In circulating fuel designs, the radioisotope inventory changes from traditional effects (e.g., radioactive decay, fission) but also includes material transport due to pressure and temperature gradients. Such designs may also require regular or continuous additions or removals during operation, which significantly increases the rate of inventory change compared to traditional pressurized water reactor (PWR)s. Thus, directly tracking the nuclear inventory is ineffective since the isotopes are continuously added and removed. The isotope ratio method instead focuses on detecting changes to the input and output flows of radioisotopes. Previous work showed that for well-chosen pairs of isotopes, the isotopic ratio provides a sensitive and lasting indicator of deviation from normal conditions (e.g., startup, shutdown, diversion). The isotope ratio method is a process monitoring method with potential for application in for forward-looking approaches to International Atomic Energy Agency (IAEA) safeguards. The original process monitoring method was developed for a specific case—the decay tank of a thorium-fueled molten salt breeder reactor. In this expanded work, we explored other types of reactors and processes with nonstationary (e.g., flowing) nuclear material, which are difficult to safeguard with traditional methods because of the transient nature of the systems. The goal of the present work is to generalize the isotope ratio method for use in processes with continuously flowing nuclear material. All continuous processes have an average time for isotopes to be replaced in the system. The isotope ratio method works by choosing radioisotopes with half-lives both above and below the processing time. The present work seeks to explore which isotopes are suitable for the method by simulating the nuclear inventory, radioisotope emissions, and detector responses for several classes of advanced reactors. While the method can in principle be applied to other processes (e.g., enrichment or reprocessing facilities), the present work limits scope to ARs with continuously flowing fuel. Section 2 details the mathematics supporting the isotope ratio method, and Section 3 introduces the representative ARs selected for this work. Section 4 discusses how each reactor was analyzed, and Section 5 showcases the results for each representative reactor. Finally, Section 6 provides concluding remarks and suggests pathways for further analysis.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Non-radiative luminescence decay with self-trapped hole migration in strontium titanate: Interplay between optical and transport properties

A novel model for the non-radiative decay of self-trapped excitons (STEs) in the advanced functional oxide SrTiO3 is proposed and supported by experimental observations. The study is based on the initial ionoluminescence stage for STE emission at 2.5 eV, and its dependence on temperature and electronic excitation rate under energetic heavy-ion irradiation. For all temperatures, this initial stage reaches rapidly a quasi-steady level, and then decreases as induced-structural damage increases. The quasi-steady luminescence exhibits a linear dependence on the excitation rate, suggesting a constant efficiency for STEs formation. An activation energy of 55 meV, essentially independent of the incident ion mass and energy of projectile-ion, is deduced from an Arrhenius-type relationship with irradiation temperature. This energy is in good agreement with experimental values, measured for non-radiative STE decay under ns-laser pulse excitation, and reasonably consistent with density functional theory calculations for migration of self-trapped holes (STHs) described by a small-polaron adiabatic hopping model. A new mechanism dealing with a non-radiative contribution to the STE transition is discussed, consisting of STH migration through thermally-activated hopping and annihilation with the STE-electron. Luminescence kinetics from the chromium intrinsic impurity strongly supports this model, being consistent with the annihilation of Cr 3+ centers through recombination with migrating STHs.

luminescence↗
DOE OSTI2020

Computational Tool for Cosmic Ray Flux and Cosmogenic Activation Production Rates

Silicon charge couple devices (CCDs) are used in direct detection dark matter searches. Silicon can be obtained with very high purity and negligible amounts of radioactive contaminants. However, silicon exposed to cosmic rays can be activated, leading to the buildup of radioactive isotopes such as tritium. The decay of tritium can produce signals that cannot be distinguished from the expected signals of dark matter interactions and tritium produced by cosmic rays is expected as one of the leading sources of background for next-generation experiments. The cosmic ray flux depends on variables such as geomagnetic latitude and longitude, atmospheric depth/altitude, solar activity, and surrounding environment for example. The goal of this work is to create a tool that will evaluate the total cosmic ray exposure and related tritium production rate for any given exposure history of a silicon detector. EXcel-based Program for calculation Atmospheric Cosmic-ray Spectrum (EXPACS) was used to obtain the cosmic ray fluxes. We have worked on creating a 3-dimensional gird that spans latitude, longitude, and altitude, and can be used to interpolate the cosmic ray flux at any given location. This computation tool additionally has use for work requiring knowledge of the cosmic ray flux at multiple locations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Electron and muon dynamics in neutron stars beyond chemical equilibrium

A neutron star harbors $\mathcal{O}$(10 56 ) electrons in its core, and almost the same number of muons, with muon decay prohibited by Pauli blocking. However, as macroscopic properties of the star such as its mass, rotational velocity, or magnetic field evolve over time, the equilibrium lepton abundances (dictated by the weak interactions) change as well. Scenarios where this can happen include spin-down, accretion, magnetic field decay, and tidal deformation. Here, we discuss the mechanisms by which a star disrupted in one of these ways re-establishes lepton chemical equilibrium. In most cases, the dominant processes are out-of-equilibrium Urca reactions, the rates of which we compute for the first time. If, however, the equilibrium muon abundance decreases, while the equilibrium electron abundance increases (or decreases less than the equilibrium muon abundance), outward diffusion of muons plays a crucial role as well. This is true in particular for stars older than about 10 4 yrs whose core has cooled to ≲ 20 keV. The muons decay in a region where Pauli blocking is lifted, and we argue that these decays lead to a flux of Script $\mathcal{O}$(10 MeV) neutrinos. Realistically, however, this flux will remain undetectable for the foreseeable future.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Developing an Evolutionary Baseline Model for Humans: Jointly Inferring Purifying Selection with Population History

Building evolutionarily appropriate baseline models for natural populations is not only important for answering fundamental questions in population genetics—including quantifying the relative contributions of adaptive versus nonadaptive processes—but also essential for identifying candidate loci experiencing relatively rare and episodic forms of selection (e.g., positive or balancing selection). Here, a baseline model was developed for a human population of West African ancestry, the Yoruba, comprising processes constantly operating on the genome (i.e., purifying and background selection, population size changes, recombination rate heterogeneity, and gene conversion). Specifically, to perform joint inference of selective effects with demography, an approximate Bayesian approach was employed that utilizes the decay of background selection effects around functional elements, taking into account genomic architecture. This approach inferred a recent 6-fold population growth together with a distribution of fitness effects that is skewed towards effectively neutral mutations. Importantly, these results further suggest that, although strong and/or frequent recurrent positive selection is inconsistent with observed data, weak to moderate positive selection is consistent but unidentifiable if rare.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Production of $Υ(nS)$ mesons in Pb + Pb and $pp$ collisions at 5.02 TeV

A measurement of the production of vector bottomonium states, $Υ$(1S), $Υ$(2S), and $Υ$(3S), in Pb + Pb and $pp$ collisions at a center-of-mass energy per nucleon pair of 5.02 TeV is presented. The data correspond to integrated luminosities of 1.38 nb –1 of Pb + Pb data collected in 2018, 0.44 nb –1 of Pb + Pb data collected in 2015, and 0.26 fb –1 of $pp$ data collected in 2017 by the ATLAS detector at the Large Hadron Collider. The measurements are performed in the dimuon decay channel for transverse momentum ${p}_{T}^{μμ}$ < 30 GeV, absolute rapidity |$y^{μμ}$| < 1.5, and Pb + Pb event centrality 0–80%. The production rates of the three bottomonium states in Pb + Pb collisions are compared with those in $pp$ collisions to extract the nuclear modification factors as functions of event centrality, ${p}_{T}^{μμ}$, and $|y^{μμ}|$. In addition, the suppression of the excited states relative to the ground state is studied. The results are compared with theoretical model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Developing the S 32 ( p , d ) S * 31 ( p ) ( γ ) reaction to probe the P 30 ( p , γ ) S 31 reaction rate in classical novae

Background: The 30 P(p,γ) 31 S reaction rate is one of the largest remaining sources of uncertainty in the final abundances of nuclei created in a classical nova involving a ONe white dwarf. The reaction rate directly influences silicon isotopic ratios, which are used as identifiers of presolar grains with nova origins. Additionally, the uncertainty in the 30 P(p,γ) 31 S reaction rate has been found to limit the use of nova nuclear thermometers based on observations of elemental ratios in nova ejecta. Purpose: Reduce uncertainties in the nuclear data for proton-unbound states in 31 S, which act as resonances for the 30 P(p,γ) 31 S reaction at classical nova temperatures, and develop a technique for high efficiency, high-resolution reaction-decay coincidence measurements. Methods: Here, the 32 S(p,d) 31 S reaction was used to populate the states of interest in 31 S. The experiment was performed at the Texas A&M Cyclotron Institute using the LLNL Hyperion array for the detection of charged particles and γ rays. A downstream silicon telescope was used to select reaction deuterons, and a single upstream silicon detector was used to measure protons emitted in the decay of unbound 31 S levels. Results: Several states in 31 S above the proton separation energy were observed to have been populated. Decay protons from the resonant states in 31 S were identified as events in the upstream silicon detectors that came in coincidence with deuterons in the downstream telescope. Protons emitted from these states were measured and branching ratios extracted. Conclusions: While no new reaction rate is derived, spin-parity assignments for several higher-lying proton unbound states have been confirmed. Measured p 0 branching ratios for these levels have been compared to previous measurements with good agreement, and in some cases provided a reduction in uncertainty. The previously identified T = 3/2 state may have been incorrectly assigned a large p 0 branching ratio in a previous measurement. The technique of measuring reaction-decay coincidences with a particle-gamma setup appears promising.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Active Site Dynamics in Molybdenum-Based Silica-Supported Olefin Metathesis Catalysts: Site Renewal and Decay Beyond the Chauvin Cycle

Heterogeneous olefin metathesis catalysts exhibit low active site densities and unpredictable kinetics due to dynamic active site formation and decay processes. Here, in this study, we establish a quantitative framework that captures active site generation, renewal, and decay in olefin metathesis over silica-supported molybdenum oxide catalysts, enabling a mechanistic explanation of catalytic behavior and strategies to achieve high, stable activity. Steady-state active site titrations reveal that 2,3-dimethyl-butene isomers (4MEs) cofeeding increases active site density by up to 4.3-fold, directly correlating with enhanced metathesis rates. Spectroscopic studies demonstrate that 4MEs facilitate Mo(VI) reduction to Mo(IV) and interact strongly with surface Si–OH groups, generating labile protons that promote active site formation via a 1,2-proton shift mechanism. Kinetic modeling indicates that ethylene acts as a decay promoter, shifting kinetic control away from the Chauvin cycle and suppressing metathesis activity. Comparative studies on catalysts with varying Mo loading reveal that promotion is most effective for dispersed molybdate species, with a decline at higher Mo loadings. These findings provide a unified mechanistic framework for heterogeneous olefin metathesis, offering new strategies to enhance active site accessibility, mitigate deactivation, and optimize catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fast wide-field upconversion luminescence lifetime thermometry enabled by single-shot compressed ultrahigh-speed imaging

Photoluminescence lifetime imaging of upconverting nanoparticles is increasingly featured in recent progress in optical thermometry. Despite remarkable advances in photoluminescent temperature indicators, existing optical instruments lack the ability of wide-field photoluminescence lifetime imaging in real time, thus falling short in dynamic temperature mapping. Here, we report video-rate upconversion temperature sensing in wide field using single-shot photoluminescence lifetime imaging thermometry (SPLIT). Developed from a compressed-sensing ultrahigh-speed imaging paradigm, SPLIT first records wide-field luminescence intensity decay compressively in two views in a single exposure. Then, an algorithm, built upon the plug-and-play alternating direction method of multipliers, is used to reconstruct the video, from which the extracted lifetime distribution is converted to a temperature map. Using the core/shell NaGdF 4 :Er 3+ ,Yb 3+ /NaGdF 4 upconverting nanoparticles as the lifetime-based temperature indicators, we apply SPLIT in longitudinal wide-field temperature monitoring beneath a thin scattering medium. SPLIT also enables video-rate temperature mapping of a moving biological sample at single-cell resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

The study of C-13(a, n)O-16 reactions in the Majorana Demonstrator calibration data

Neutron captures and delayed decays of reaction products are common sources of backgrounds in ultra-rare event searches. In this work, we studied 13C(a, n)1640 O reactions induced by a-particles emitted within the calibration sources of the Majorana Demonstrator. These sources are thorium-based calibration standards enclosed in carbon-rich materials. The reaction rate was estimated by using the 6129 keV ?-rays emitted from the excited 1643 O states that are populated when the incoming a-particles have enough energy. Thanks to the excellent energy performance of the Demonstrator’s germanium detectors, these characteristic photons can be clearly observed in the calibration data. Facilitated by Geant4 simulations, a comparison between the observed 6129 keV photon rates and predictions by a TALYS-based software was performed. The measurements and predictions were found to be consistent with each other, albeit with large statistical uncertainties. This agreement provides supports for further background predictions for (a, n)-reactions in future double-beta decay search efforts.

6 ≤ A ≤ 19↗
DOE OSTI2024

Search for axion-like particles through nuclear Primakoff production using the GlueX detector

We report on the results of the first search for the production of axion-like particles (ALPs) via Primakoff production on nuclear targets, γA → aA, in the “SRC-CT” experiment using the GlueX detector at Jefferson Lab. This search uses an integrated luminosity of 100 pb -1 nucleon on a 12 C target with a real photon beam of energies 6 < E γ < 10.8 GeV, and explores the mass region of 200 < m a < 450 MeV via the decay a → γγ. This mass range is between the π 0 and η meson masses, which enables the use of the measured η meson production rate to obtain absolute bounds on the ALP production with reduced sensitivity to experimental luminosity and detection efficiency. We find no evidence for an ALP, consistent with previous searches in the quoted mass range, and present limits on the effective photon coupling scale of $\mathscr{O}$(1 TeV -1 ). We further find that the ALP production limit we obtain is hindered by the peaking structure of the non-target-related dominant background the in GlueX spectrometer, which we treat by using data on 4 He to estimate and subtract it. We comment on how this search can be improved in a future higher-statistics dedicated measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

3 𝑃 0 model revisited

We revisit the phenomenological 3 𝑃 0 model for the decay of quarkonium ($Q\bar{Q}$) into two open flavor mesons ($\bar{𝔐}⁢𝔐$). We take the heavy-quark limit and derive a transition rate between $Q\bar{Q}$ and $\bar{𝔐}⁢𝔐$ to be compared with the one calculated in studies of string breaking using lattice QCD. This comparison allows us to fit the creation amplitude of a light quark-antiquark pair in the 3 𝑃 0 model to the string-breaking transition rate in QCD.

lifetimes & widths↗
DOE OSTI2026

Evidence for an isomeric {pi}½{sup +}[411] state in {sup 183}Ta

We report on the identification of a new isomeric state in Ta populated via the ground-state -decay of Hf. The experiment was performed at the KISS setup at RIKEN, where neutron-rich hafnium isotopes were produced via multi-nucleon transfer (MNT) reactions, followed by laser ionization of hafnium atoms, mass separation, and detection using an electron-gamma coincidence system. Isomeric spectroscopy was carried out by gating on different electron-gamma time correlations. A 459.1 keV -ray transition was identified in delayed spectra, and a half-life of μ was extracted through time-distribution fitting. The 459.1 keV state in Ta is known from previous work and has been assigned a Nilsson orbital configuration of , while a proposed new isomeric state above it is interpreted as a configuration that decays to via a low-energy, unobserved E2 transition. This is consistent with the systematic trends in neighbouring odd-A nuclei and transition rate calculations. Similar content being viewed by others

Doshi, S.↗
DOE OSTI2024

Study on the accidental background of the JSNS$^2$ experiment

JSNS 2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that searches for sterile neutrinos via the observation of $\overline{v}$ μ → $\overline{v}$ e appearance oscillations using muon decay-at-rest neutrinos. The JSNS 2 experiment performed data taking from 2021. In this manuscript, a study of the accidental background is presented. The rate of the accidental background is (9.29 ± 0.39) x 10 –8 /spill with 0.75 MW beam power and comparable to the expected number of signal events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Multi-track reconstruction algorithm in the Mu2e experiment

The Mu2e experiment, under construction at Fermilab, will search for the neutrino-less coherent $\mu^-N\rightarrow e^-N$ conversion in the field of a $^{27}$Al nucleus. Such a process violates lepton flavor conservation. About $60\%$ of muons stopped by an $^{27}$Al nucleus will undergo nuclear capture, while about $40\%$ will decay in orbit. To quantify the conversion probability, we define $R_{\mu e}$, which is given by the ratio between the $\mu^-\rightarrow e^-$ conversion rate and the nuclear capture rate [1]: \begin{equation} R_{\mu e}= \frac{\Gamma\left(\mu^- + N\left(Z,A\right)\rightarrow e^- + N\left(Z,A\right)\right)}{\Gamma\left(\mu^- + N\left(Z,A\right)\rightarrow \nu^-_\mu + N\left(Z-1,A\right)\right)}\,. \end{equation} The upper limit on $R_{\mu e}$ is $7\cdot 10^{-13}$ at $90\%$ CL, set by the SINDRUM II experiment~\cite{SINDRUM II:limit}. The goal of the Mu2e experiment is to reach a sensitivity on $R_{\mu e}$ of $8\cdot 10^{-17}$ at $90\%$ CL. This represents a four-order of magnitude improvement over the current experimental limit. Mu2e will take its first data in 2027. The signature for the muon conversion is a monochromatic electron of $104.97$~\si{\mega\eV}/c, an energy slightly below the muon rest mass. While the main experiment goal is to reconstruct the conversion electron, i.e., an event with a single track, there are motivations to develop an efficient tracking algorithm for reconstructing more simultaneous tracks. This could better constrain the background generated by $p\bar{p}$-annihilation in the Al target and to search for other Beyond the Standard Model processes. In this paper, we present an algorithm designed to reconstruct multi-particle events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Studying the hadron structure with PANDA and CLAS using machine learning techniques

The hadron spectroscopy and structure are currently very active fields of research to study the non-perturbative regime of quantum chronodynamics. The first one studies the complex structure of excited hadrons by looking at their decay products, while the latter uses lepton scattering on nucleons. Both methods require reconstruction algorithms with great efficiency and good particle identification and background rejection rates. This work aims to provide these by either improving the existing methods or developing new ones. The first part of this document presents a feasibility study of a predicted hybrid charmonium state for the PANDA experiment. Lattice QCD calculations predict the ground state hybrid charmonium to be a spin exotic with quantum numbers of JP C = 1?+ at a mass of around 4.3 GeV with a width to be around 20 MeV. A machine learning based data analysis scheme is proposed to further improve the signal efficiency and the background reduction, alongside with improvements of the analysis software (PandaRoot), that are vital for this study. These improvements include a reworked clustering algorithm for the electromagnetic calorimeter (EMC) and an optimized monte carlo matching for neutral particles. The second part of this document is about studying the proton structure. A multidimensional study of the structure function ratio Fsin(?)LU /FUU has been performed for K±, based on the measurement of beam-spin asymmetries. It uses the high statistics data recorded with the CLAS12 spectrometer at Jefferson Laboratory. Fsin(?)LU is a twist-3 quantity that provides information about the quark gluon correlations in the proton. This document will present for the first time a simultaneous analysis of two kaon channels over a large kinematic range of z, xB , PT and Q2 with virtualities Q2 ranging from 1 GeV2 up to 8 GeV2 using machine learning techniques for improved particle identification.

Kripko, Aron↗
DOE OSTI2024

Measurement of D-T Neutron Source Flux by SelfNeutron Activation Analysis with a LaBr3 Detector

Conclusions: • Decay of 78Br produced from the 79Br(n,2n) reaction in LaBr3 is present in the spectrum plotted in the time domain. • The neutron production rate reconstructed from preliminary LaBr3 estimate is smaller than the generator output. • Generator characterization may become more routine if a simple and robust method is made available for applications. Ongoing work: • Implementing bootstrapping to improve error estimates. • Examining threshold and edge effects of LaBr3

SMITH, MURRY↗