Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Imaging single cells in a beam of live cyanobacteria with an X-ray laser (CXIDB ID 26)

This entry contains ten diffraction patterns, and reconstructions images, of individual living Cyanobium gracile cells, imaged using 517 eV X-rays from the LCLS XFEL. The Hawk software package was used for phasing. The Uppsala aerosol injector was used for sample injection, assuring very low noise levels. The cells come from various stages of the cell cycle, and were imaged in random orientations.

AMO↗

Determination of cations distribution in Mn[subscript 3]O[subscript 4] by anomalous x-ray powder diffraction

The oxidation states of Mn at two different crystallographic sites in the distorted spinel structure of Mn{sub 3}O{sub 4} were determined by the approach of anomalous synchrotron x-ray powder diffraction. The real parts of anomalous scattering factors for the two Mn sites were refined from a series of powder diffraction patterns collected at the vicinity of K absorption edge of Mn. The results of Rietveld refinements showed that the two distinct cation sites can obviously be distinguished from each other and that Mn{sup 2+} ions occupy the tetrahedral site and Mn{sup 3+} ions are located at the octahedral site.

43 PARTICLE ACCELERATORS↗

MULTI-SCALE DIFFRACTION STUDY OF REVERSIBLE/IRREVERSIBLE DEFORMATION MECHANISMS IN THE NI-BASED SUPERALLOYS DURING FATIGUE

In this study, a nickel-based polycrystalline is subjected to cyclic loading. The subsequent fatigue damage has been investigated with in-situ neutron-diffraction, thermal characterization for a single-phase, transmission-electron microscopy (TEM) and polychromatic X-ray microdiffraction (PXM). Different stages of fatigue damage are observed including bulk hardening, softening, and eventual saturation evident in the diffraction patterns and the thermal-evolution features. An increase in dislocation density is responsible for hardening within the early cycles. The transition to saturation cycles is characterized by the anisotropy of the lattice-strain evolution. Inhomogeneity of the thermal response and irreversible compression of the lattice planes and statistical dislocation structures are observed in the final saturation fatigue cycles. Analysis of the PXM-Laue patterns reveals cyclically-deformed microstructure near the grain boundaries, which are composed of the lattice rotations and grain subdivisions. The PXM results are in good agreement with the TEM results. Combined simulation/experimental analysis allows determination of slip-system dependent dislocation density in individual grains.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of ferrous trioctahedral smectites: Implications for clay mineral genesis and detectability on Mars

Widespread detections of phyllosilicates in Noachian terrains on Mars imply a history of near-surface fluid-rock interaction. Ferrous trioctahedral smectites are thermodynamically predicted products of basalt weathering on early Mars, but to date only Fe 3+ -bearing dioctahedral smectites have been identified from orbital observations. In general, the physicochemical properties of ferrous smectites are poorly studied because they are susceptible to air oxidation. In this study, eight Fe 2+ -bearing smectites were synthesized from Fe 2+ -Mg-Al silicate gels at 200°C under anoxic conditions. Samples were characterized by inductively coupled plasma optical emission spectrometry, powder X-ray diffraction, Fe K-edge X-ray absorption spectroscopy (XAS), Mössbauer spectroscopy, and visible/near-infrared (VNIR) reflectance spectroscopy. The range of redox states was Fe 3+ /ΣFe = 0 to 0.06 ± 0.01 as determined by both XAS and, for short integration times, Mössbauer. The smectites have 060 distances (d (060) ) between 1.53 and 1.56 Å, indicating a trioctahedral structure. d (060) and XAS-derived interatomic Fe-(Fe,Mg,Al) distance scaled with Fe content. Smectite VNIR spectra feature OH/H 2 O absorption bands at 1.4 and 1.9 µm, (Fe 2+ ,Mg,Al) 3 -OH stretching bands near 1.4 µm, and Fe 2+ Fe 2+ Fe 2+ -OH, MgMgMg-OH, AlAl(Mg,Fe 2+ )-OH, and AlAl-OH combination bands at 2.36 µm, 2.32 µm 2.25 µm, and 2.20 µm, respectively. The spectra for ferrous saponites are distinct from those for dioctahedral ferric smectites, permitting their differentiation from orbital observations. X-ray diffraction patterns for synthetic high-Mg ferrosaponite and high-Mg ferrian saponite are both consistent with the Sheepbed saponite detected by the chemistry and mineralogy (CheMin) instrument at Gale Crater, Mars, suggesting that anoxic basalt alteration was a viable pathway for clay mineral formation on early Mars.

58 GEOSCIENCES↗

Characterization of the carbides and the martensite phase in powder-metallurgy high-speed steel

A microstructural characterization of the powder-metallurgy high-speed-steel S390 Microclean was performed based on an elemental distribution of the carbide phase as well as crystallographic analyses. The results showed that there were two types of carbides present: vanadium-rich carbides, which were not chemically homogeneous and exhibited a tungsten-enriched or tungsten-depleted central area; and chemically homogeneous tungsten-rich M{sub 6}C-type carbides. Despite the possibility of chemical inhomogenities, the crystallographic orientation of each of the carbides was shown to be uniform. Using electron backscatter diffraction the vanadium-rich carbides were determined to be either cubic VC or hexagonal V{sub 6}C{sub 5}, while the tungsten-rich carbides were M{sub 6}C. The electron backscatter diffraction results were also verified using X-ray diffraction. Several electron backscatter diffraction pattern maps were acquired in order to define the fraction of each carbide phase as well as the amount of martensite phase. The fraction of martensite was estimated using band-contrast images, while the fraction of carbides was calculated using the crystallographic data.

36 MATERIALS SCIENCE↗

Low-temperature synthesis of AlN powder with multicomponent additive systems by carbothermal reduction-nitridation method

AlN powders were synthesized at low temperatures (1300 and 1400 {sup o}C) by the carbothermal reduction-nitridation (CRN) method using multicomponent additive systems. The synthesis treatments were conducted in a graphite furnace with flowing nitrogen gas between 1200 and 1500 {sup o}C using powder mixtures with Al{sub 2}O{sub 3}:C molar ratio of 1:3 and 0.5-3 wt% of CaF{sub 2}, Y{sub 2}O{sub 3}, Li{sub 2}CO{sub 3} and/or SrCO{sub 3} as additives. In relation to the conventional CRN process, the use of multicomponent additive systems reduced the synthesis temperature in 200 {sup o}C (CaF{sub 2}-SrCO{sub 3}), 100 {sup o}C (CaF{sub 2}-Li{sub 2}CO{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}) or <100 {sup o}C (CaF{sub 2}-Y{sub 2}O{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}-SrCO{sub 3}). X-ray diffraction patterns showed that the additives reacted with the alumina powder forming aluminate phases, which vaporized with the increase of synthesis temperature. The enhanced AlN conversion rate was discussed in terms of the vaporization of aluminates in the reducing atmosphere.

36 MATERIALS SCIENCE↗

Effect of film thickness on structural and mechanical properties of AlCrN nanocompoite thin films deposited by reactive DC magnetron sputtering

In this study, the influence of film thickness on the structural, surface morphology and mechanical properties of Aluminum chromium nitride (AlCrN) thin films has been successfully investigated. The AlCrN thin films were deposited on silicon (100) substrate using dc magnetron reactive co-sputtering at substrate temperature 400° C. The structural, surface morphology and mechanical properties were studied using X-ray diffraction, field-emission scanning electron microscopy and nanoindentation techniques respectively. The thickness of these thin films was controlled by varying the deposition time therefore increase in deposition time led to increase in film thickness. X-ray diffraction pattern of AlCrN thin films with different deposition time shows the presence of (100) and (200) orientations. The crystallite size varies in the range from 12.5 nm to 36.3 nm with the film thickness due to surface energy minimization with the higher film thickness. The hardness pattern of these AlCrN thin films follows Hall-Petch relation. The highest hardness 23.08 Gpa and young modulus 215.31 Gpa were achieved at lowest grain size of 12.5 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wide band gap gallium arsenide nanoparticles fabricated using plasma method

In this paper, we have reported the fabrication of gallium arsenide (GaAs) nanoparticles on quartz placed at distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively from top of anode. The fabrication has been carried out by highly energetic and high fluence ions of GaAs produced by hot, dense and extremely non-equilibrium plasma in a modified dense plasma focus device. GaAs nanoparticles have mean size of about 23 nm, 16 nm and 14 nm for deposition at a distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively. The nanoparticles are crystalline in nature as evident from X-ray diffraction patterns. The band gap of nanoparticles is found to increase from 1.425 eV to 5.37 eV at 4.0 cm distance, which further increases as distance increases. The wide band gap observed for fabricated GaAs nanoparticles suggest the possible applications of nanoparticles in laser systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fast x-ray microdiffraction techniques for studying irreversible transformations in materials.

A pair of techniques have been developed for performing time-resolved X-ray microdiffraction on irreversible phase transformations. In one technique capillary optics are used to focus a high-flux broad-spectrum X-ray beam to a 60 {micro}m spot size and a fast pixel array detector is used to achieve temporal resolution of 55 {micro}s. In the second technique the X-rays are focused with Kirkpatrick-Baez mirrors to achieve a spatial resolution better than 10 {micro}m and a fast shutter is used to provide temporal resolution better than 20 {micro}s while recording the diffraction pattern on a (relatively slow) X-ray CCD camera. Example data from experiments are presented where these techniques are used to study self-propagating high-temperature synthesis reactions in metal laminate foils.

43 PARTICLE ACCELERATORS↗

In Situ Synchrotron X-ray Study of the Mechanical Properties of Pure Mg Produced by Powder Metallurgy

In this study, in situ synchrotron X-ray experiments with wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) detectors were performed on two pure magnesium materials produced by powder metallurgy. According to SAXS analysis, each of the two materials has a porosity of less than 0.5%. Line broadening analysis was performed on diffraction patterns collected by WAXS to analyze the dislocation evolution during material deformation. In both materials, $<$a$>$-type dislocation activities dominate the tensile deformation. The influence of grain size and texture on the different tensile behaviors of these two materials is also discussed.

line profile analysis (LPA)↗

Pr{sup 3+}–Yb{sup 3+} codoped Y{sub 2}O{sub 3} phosphor for display devices

Graphical abstract: Concentration dependence of UC emission intensity for (a) Pr{sup 3+} ions and (b) Yb{sup 3+} ions in doped/codoped Y{sub 2}O{sub 3} phosphors. - Highlights: • Upconversion emission bands with their enhanced emission intensity have been observed on codoping of Yb{sup 3+} ions. • By using Scherrer’s formula and Hall–Williamson plot, the presence of nano-structured crystallites have been identified. • The decay curve analysis for the emitting level has been performed. • The codoped phosphor proves its suitability in making the visible upconverter and display devices. - Abstract: Efficient green colour emitting Pr{sup 3+}–Yb{sup 3+} codoped Y{sub 2}O{sub 3} phosphor prepared by low temperature solution combustion process has been investigated under the excitation with a 980 nm diode laser. Several upconversion emission bands from Pr{sup 3+} ions with their enhanced upconversion emission intensity have been observed on codoping of Yb{sup 3+} ions in the Y{sub 2}O{sub 3}:Pr{sup 3+} system. To identify the phase formation, size of crystallites and strain present in synthesized sample, X-ray diffraction pattern has been recorded. The decay curve analysis for the emitting level has also been performed along with power dependence study to clear the upconversion process. The tunability of colour emitted from the codoped phosphor has been examined which proves its suitability for display devices.

36 MATERIALS SCIENCE↗

Investigation of new superhard carbon allotropes with promising electronic properties

During the systematic search for a new superhard carbon allotrope, we predicted three structures with promising physical properties. Our electronic structure calculations show that these materials have a semiconducting band gap and a high carrier mobility comparable with diamond. The simulated x-ray diffraction patterns of the proposed materials are in a good agreement with the experimental X-ray spectra. Evaluated phase transition pressures from graphite to the new proposed carbon phases are smaller than 25 GPa and close to the experimental values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of substrate quality on structural properties of AlGaN/GaN superlattices grown by molecular beam epitaxy

Short-period AlGaN/GaN superlattices were established as versatile test structures to investigate the structural properties of molecular beam epitaxy (MBE)-grown GaN and AlGaN layers and their dependence on the GaN substrate quality. X-ray diffractometry data of the investigated superlattices allow access to relevant structural parameters such as aluminum mole fraction and layer thicknesses. The occurrence of theoretically predicted intense high-order satellite peaks and pronounced interface fringes in the diffraction pattern reflects abrupt interfaces and perfect 2-dimensional growth resulting in smooth surfaces. The data unambiguously demonstrate that the structural quality of the MBE grown layers is limited by the structural properties of the GaN substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On-the-fly scans for X-ray ptychography

With the increasing importance of nanotechnology, the need for reliable real-time imaging of mesoscopic objects with nanometer resolution is rising. For X-ray ptychography, a scanning microscopy technique that provides nanometric resolution on extended fields of view, and the settling time of the scanning system is one of the bottlenecks for fast imaging. Here, we demonstrate that ptychographic on-the-fly scans, i.e., collecting diffraction patterns while the sample is scanned with constant velocity, can be modelled as a state mixture of the probing radiation and allow for reliable image recovery. Characteristics of the probe modes are discussed for various scan parameters, and the application to significantly reducing the scanning time is considered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental geometry for simultaneous beam characterization and sample imaging allowing for pink beam Fourier transform holography or coherent diffractive imaging

One consequence of the self-amplified stimulated emission process used to generate x rays in free electron lasers (FELs) is the intrinsic shot-to-shot variance in the wavelength and temporal coherence. In order to optimize the results from diffractive imaging experiments at FEL sources, it will be advantageous to acquire a means of collecting coherence and spectral information simultaneously with the diffraction pattern from the sample we wish to study. We present a holographic mask geometry, including a grating structure, which can be used to extract both temporal and spatial coherence information alongside the sample scatter from each individual FEL shot and also allows for the real space reconstruction of the sample using either Fourier transform holography or iterative phase retrieval.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray diffraction characterization of magnetostriction in Terfenol-D

The magnetostrictive response of a Terfenol-D pellet was measured via a laboratory-based X-ray diffractometer. X-ray diffraction patterns were collected from the pellet sample with and without the presence of an applied magnetic field (~30 mT) generated by placing a large magnet under the pellet. A standard reference material, Silicon 640c, was employed as an internal standard. Magnetostriction values of 323 and 227 ppm Δl/l were determined for the (104) and (110) indexed peaks, respectively, assuming a rhombohedral structure for Terfenol-D. A threshold noise level value of ~20 to 30 ppm Δl/l was suggested based on before/after measurements in the absence of the applied field. No clear evidence of domain wall rotation was detected via changes in relative intensities of diffraction peaks in the presence of the applied magnetic field.

Magnetostriction↗

Superhydrophobic Surface of AZ31 Alloy Fabricated by Chemical Treatment in the NiSO{sub 4} Solution

In the present study, the formation of superhydrophobic (SHP) structure on the surface of Mg alloy was investigated by immersion in the CuCl{sub 2} and NiSO{sub 4} solutions following by soaking in the stearic acid (SA) solution. The results revealed the presence of some stearic acid bonds on the surface of Mg alloy. The contact angle of the surface after the process measured about 151.5°, which could be due to the presence of flake-like morphology and the adsorption of hydrophobic substances of SA. X-ray diffraction pattern showed the presence of NiO as the resistant phase against the diffusion of species. Besides, the values of noise and corrosion resistance regarding SHP Mg were at least three orders of magnitude higher than that of bare Mg alloy due to the formation of SHP structure.

36 MATERIALS SCIENCE↗

Determination of the phase boundary of the omega to beta transition in Zr using in situ high-pressure and high-temperature X-ray diffraction

The high-pressure behavior of zirconium has been examined using the synchrotron X-ray diffraction technique to a pressure of 38 GPa and a temperature of 800 K employing a hydrothermal diamond anvil cell technique. The structural transition from the ω to the β phase was observed. This transition has a negative dP/dT gradient, which is in general agreement with those reported in previous studies. The transition boundary was determined to be, P (GPa)=41.2–0.025×T (K). The negative slope of the transition, dP/dT, determined in our study using the diamond anvil cell technique was less than half that estimated by the previous study using a large press apparatus. - Graphical abstract: Experimental results and phase boundary of the ω–β transition in Zr. - Highlights: • X-ray diffraction patterns of zirconium were measured by the synchrotron experiments. • High-pressure experiments were performed by an external-heated diamond anvil cell. • Phase diagram of zirconium was determined at high pressures and high temperatures. • Phase boundary between omega and beta transition has a negative dP/dT slope.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗