Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Modeling the effect of water on mantle rheology

To study the thermal history of the Earth we use a parameterized model of mantle convection. This model includes a mathematical description of de- and regassing processes of water from the Earth's mantle. The rates of this processes are considered to be directly proportional to the seafloor spreading rate. The kinematic viscosity of the mantle depends on the temperature/pressure as well as on the volatile content. Dissolved volatiles such as water weaken the minerals by reducing their activation energy for solid state creep. Karato and Toriumi showed a power law dependence between creep rate and water fugacity derived from experimental results. Therefore, we use such flow parameters of diffusion creep in olivine under wet and dry conditions to calculate the mantle viscosity as a function of the water content. Because the creep rate is proportional to the concentration of water-related point deflects we assume that the water fugacity is proportional to the water weight fraction. An equation for the steady-state strain rate under wet conditions is established. To assess the unknown constant K in this equation, we use flow law parameters given by Karato and Wu as well as the results of McGovern and Schubert.

Bounama, CH.↗

An experimental investigation of S-duct flow control using arrays of low-profile vortex generators

An experimental investigation was undertaken to measure the effect of various configurations of low-profile vortex generator arrays on the flow in a diffusing S-duct. Three parameters that characterize the vortex generator array were systematically varied to determine their effect: (1) the vortex generator height, (2) the streamwise location of the vortex generator array, and (3) the vortex generator spacing. Each array of vortex generators tested improved total pressure recovery. The configuration employing the largest vortex generators was the most effective in reducing total pressure distortion but did not produce the greatest total pressure recovery. No configuration of vortex generators completely eliminated the flow separation that naturally occurs in the S-duct; however the extent of the separated flow region was reduced.

Reichert, B. A.↗

Spectrum of passive scalars of high molecular diffusivity in turbulent mixing

Abstract We consider the mixing of passive scalars transported in turbulent flow, with a molecular diffusivity that is large compared to the kinematic viscosity of the fluid. This particular case of mixing has not received much attention in experiment or simulation even though the first putative theory, due to Batchelor, Howells & Townsend ( J. Fluid Mech. , vol. 5, 1959, pp. 134–139), is now more than 50 years old. We study the problem using direct numerical simulation of decaying scalar fields in steadily sustained homogeneous turbulence as the Schmidt number (the ratio of the kinematic viscosity of the fluid to the molecular diffusivity of the scalar) is allowed to vary from $1/ 8$ to $1/ 2048$ for two values of the microscale Reynolds number, ${R}_{\lambda } \approx 140$ and $\approx $ 240. The simulations show that the passive scalar spectrum assumes a slope of $- 17/ 3$ in a range of scales, as predicted by the theory, when the Schmidt number is small and the Reynolds number is simultaneously large. The observed agreement between theory and simulation in the prefactor in the spectrum is not perfect. We assess the reasons for this discrepancy by a careful examination of the scalar evolution equation in the light of the assumptions of the theory, and conclude that the finite range of scales resolved in simulations is the main reason. Numerical issues specific to the regime of very low Schmidt numbers are also addressed briefly.

Mechanics↗

A status of the activities of the NASA/MSFC pump stage technology team

The Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology was established to aid the transfer of CFD related advancements among academia, government agencies, and industry. The specific goals of the Consortium are to develop CFD methodologies necessary to solve propulsion problems, to validate these methodologies, and to apply these methodologies in the design process. To accomplish these goals, a team of experts in various related fields was formed, a schedule of activities necessary to meet the goals was generated, and funding for the activities was obtained from NASA. During the past year (Mar. 1991 - Mar. 1992) the team's activities have focused on preliminary code validation and on the design of an advanced impeller. Six codes were used to calculate the flow in a Rocketdyne 0.3 flow coefficient inducer, and the results were compared to L2F data available for the inducer. This activity identified shortcomings in the experimental data sets and in the analytical solutions which must be surmounted in any future team activity. The design of the advanced impeller relied heavily on CFD results to obtain an optimized geometry. The optimized geometry was analyzed using four different codes, at design and off-design conditions. Activities for the next year include the optimization of a tandem blade impeller design, benchmark of CFD codes for diffuser and volute flows, the collection of L2F data for 'state-of-the-art' impeller and inducer, and the verification of the advanced pump team impeller design in a water rig.

Garcia, R.↗

Computational fluid dynamics study of the variable-pitch split-blade fan concept

A computational fluid dynamics study was conducted to evaluate the feasibility of the variable-pitch split-blade supersonic fan concept. This fan configuration was conceived as a means to enable a supersonic fan to switch from the supersonic through-flow type of operation at high speeds to a conventional fan with subsonic inflow and outflow at low speeds. During this off-design, low-speed mode of operation, the fan would operate with a substantial static pressure rise across the blade row like a conventional transonic fan; the front (variable-pitch) blade would be aligned with the incoming flow, and the aft blade would remain fixed in the position set by the supersonic design conditions. Because of these geometrical features, this low speed configuration would inherently have a large amount of turning and, thereby, would have the potential for a large total pressure increase in a single stage. Such a high-turning blade configuration is prone to flow separation; it was hoped that the channeling of the flow between the blades would act like a slotted wing and help alleviate this problem. A total of 20 blade configurations representing various supersonic and transonic configurations were evaluated using a Navier Stokes CFD program called ADAPTNS because of its adaptive grid features. The flow fields generated by this computational procedure were processed by another data reduction program which calculated average flow properties and simulated fan performance. These results were employed to make quantitative comparisons and evaluations of blade performance. The supersonic split-blade configurations generated performance comparable to a single-blade supersonic, through-flow fan configuration. Simulated rotor total pressure ratios of the order of 2.5 or better were achieved for Mach 2.0 inflow conditions. The corresponding fan efficiencies were approximately 75 percent or better. The transonic split-blade configurations having large amounts of turning were able to generate large amounts of total turning and achieve simulated total pressure ratios of 3.0 or better with subsonic inflow conditions. These configurations had large losses and low fan efficiencies in the 70's percent. They had large separated regions and low velocity wakes. Additional turning and diffusion of this flow in a subsequent stator row would probably be very inefficient. The high total pressure ratios indicated by the rotor performance would be substantially reduced by the stators, and the stage efficiency would be substantially lower. Such performance leaves this dual-mode fan concept less attractive than originally postulated.

Kepler, C. E.↗

SOLAR PARITY ISSUE WITH FLUX-TRANSPORT DYNAMO

We investigated the dependence of the solar magnetic parity between the hemispheres on two important parameters, the turbulent diffusivity and the meridional flow, by means of axisymmetric kinematic dynamo simulations based on the flux-transport dynamo model. It is known that the coupling of the magnetic field between hemispheres due to turbulent diffusivity is an important factor for the solar parity issue, but the detailed criterion for the generation of the dipole field has not been investigated. Our conclusions are as follows. (1) The stronger diffusivity near the surface is more likely to cause the magnetic field to be a dipole. (2) The thinner layer of the strong diffusivity near the surface is also more apt to generate a dipolar magnetic field. (3) The faster meridional flow is more prone to cause the magnetic field to be a quadrupole, i.e., symmetric about the equator. These results show that turbulent diffusivity and meridional flow are crucial for the configuration of the solar global magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

A new determination of the solar rotation rate

We use 'stackplot' displays to compare observations of the photospheric magnetic field during sunspot cycle 21 with simulations based on the flux-transport model. Adopting nominal rates of diffusion, differential rotation, and meridional flow, we obtain slanted patterns similar to those of the observed field, even when the sources of flux are assigned random longitudes in the model. At low latitudes, the slopes of the nearly vertical patterns of simulated field are sensitive to the rotation rate used in the calculation, and insensitive to the rates of diffusion and flow during much of the sunspot cycle. Good agreement between the observed and simulated patterns requires a synodic equatorial rotation period of 26.75 +/- 0.05 days.

Sheeley, N. R., Jr.↗

Ambipolar diffusion in the middle atmosphere

In the middle atmosphere above 60 km, the electron concentration increases with altitude, reaching values of 10 to the 10th per cu m in the daytime ionospheric E region near 100 km. The electrons are more mobile than the ions and diffuse more rapidly through the neutral atmosphere. The electron diffusion polarizes the medium, causing an electric field to develop that acts to retard the electron diffusion and enhance the conduction current of ions. A global zonally averaged numerical model of atmosheric electricity from the ground to 100 km is used to examine the effect of ambipolar diffusion and the earth's geomagnetic field on the currents and fields in the middle atmosphere. The results show that above about 65 km, ambipolar diffusion generates local electric fields and conduction currents that balance electron diffusion currents. The electric fields and conduction currents are a few orders of magnitude larger than the vertical fields and currents calculated from the downward mapping of the ionospheric potential without taking electron diffusion into account. Ambipolar diffusion does not alter the total current flowing in the global circuit. It is a local effect where enhanced conduction currens flow to balance the electron diffusion current.

Tzur, I.↗

PHYSICAL ORIGIN OF DIFFERENCES AMONG VARIOUS MEASURES OF SOLAR MERIDIONAL CIRCULATION

We show that systematic differences between surface Doppler and magnetic element tracking measures of solar meridional flow can be explained by the effects of surface turbulent magnetic diffusion. Feature-tracking speeds are lower than plasma speeds in low and mid latitudes, because magnetic diffusion opposes poleward plasma flow in low latitudes whereas it adds to plasma flow at high latitudes. Flux-transport dynamo models must input plasma flow; the model outputs yield estimates of the surface magnetic feature tracking speed. We demonstrate that the differences between plasma speed and magnetic pattern speed in a flux-transport dynamo are consistent with the observed difference between these speeds.

79 ASTRONOMY AND ASTROPHYSICS↗

Dissolution of a cylindrical disk in Hele-Shaw flow: a conformal-mapping approach

Here we apply conformal mapping to find the evolving shapes of a dissolving cylinder in a potential flow. Similar equations can be used to describe melting in a flowing liquid phase. Results are compared with microfluidic experiments and numerical simulations. Shapes predicted by conformal mapping agree almost perfectly with experimental observations, after a modest (20 %) rescaling of the time. Finite-volume simulations show that the differences with experiment are connected to the underlying assumptions of the analytical model: potential flow and diffusion-limited dissolution. Approximate solutions of the equations describing the evolution of the shape of the undissolved solid can be derived from a Laurent expansion of the mapping function from the unit circle. Asymptotic expressions for the evolution of the area of the disk and the shift in its centre of mass have been derived at low and high Péclet number. Analytic approximations to the leading-order Laurent coefficients provide additional insight into the mechanisms underlying pore-scale dissolution.

58 GEOSCIENCES↗

Three-dimensional compressible turbulent computations for a diffusing S-duct

The purpose of the present study was to evaluate the capability of the computational fluid dynamics computer program PARC3D to model flow in a typical diffusing subsonic S-duct, with strong secondary flows. This evaluation is needed to provide confidence in the analysis of aircraft inlets, which have similar geometries. The performance predictions include total pressure profiles, static pressures, velocity profiles, boundary layer data, and skin friction data. Flow in the S-duct is subsonic, and the boundary layers are assumed to be turbulent. The results for both H and O grid solutions, are compared with existing test data.

Smith, C. F.↗

The Great Solar Active Region NOAA 12192: Helicity Transport, Filament Formation, and Impact on the Polar Field

The solar active region (AR), NOAA 12192, appeared in 2014 October as the largest AR in 24 years. Here we examine the counterintuitive nature of two diffusion-driven processes in the region: the role of helicity buildup in the formation of a major filament, and the relationship between the effects of supergranular diffusion and meridional flow on the AR and on the polar field. Quantitatively, calculations of current helicity and magnetic twist from Helioseismic and Magnetic Imager (HMI) vector magnetograms indicate that, though AR 12192 emerged with negative helicity, positive helicity from subsequent flux emergence, consistent with the hemispheric sign-preference of helicity, increased over time within large-scale, weak-field regions such as those near the polarity inversion line (PIL). Morphologically, Atmospheric Imaging Assembly observations of filament barbs, sigmoidal patterns, and bases of Fe xii stalks initially exhibited signatures of negative helicity, and the long filament that subsequently formed had a strong positive helicity consistent with the helicity buildup along the PIL. We find from full-disk HMI magnetograms that AR 12192's leading positive flux was initially closer to the equator but, owing either to the region’s magnetic surroundings or to its asymmetric flux density distribution, was transported poleward more quickly on average than its trailing negative flux, contrary to the canonical pattern of bipole flux transport. This behavior caused the AR to have a smaller effect on the polar fields than expected and enabled the formation of the very long neutral line where the filament formed.

79 ASTRONOMY AND ASTROPHYSICS↗

Detecting inter-aquifer leakage in areas with limited data using hydraulics and multiple environmental tracers, including {sup 4}He, {sup 36}Cl/Cl, {sup 14}C and {sup 87}Sr/{sup 86}Sr

The investigation of regionally extensive groundwater systems in remote areas is hindered by a shortage of data due to a sparse observation network, which limits our understanding of the hydrogeological processes in arid regions. The study used a multidisciplinary approach to determine hydraulic connectivity between the Great Artesian Basin (GAB) and the underlying Arckaringa Basin in the desert region of Central Australia. In order to manage the impacts of groundwater abstraction from the Arckaringa Basin, it is vital to understand its connectivity with the GAB (upper aquifer), as the latter supports local pastoral stations and groundwater-dependent springs with unique endemic flora and fauna. The study is based on the collation of available geological information, a detailed analysis of hydraulic data, and data on environmental tracers. Enhanced inter-aquifer leakage in the centre of the study area was identified, as well as recharge to the GAB from ephemeral rivers and waterholes. Throughout the rest of the study area, inter-aquifer leakage is likely controlled by diffuse inter-aquifer leakage, but the coarse spatial resolution means that the presence of additional enhanced inter-aquifer leakage sites cannot be excluded. This study makes the case that a multi-tracer approach along with groundwater hydraulics and geology provides a tool-set to investigate enhanced inter-aquifer leakage even in a groundwater basin with a paucity of data. A particular problem encountered in this study was the ambiguous interpretation of different age tracers, which is attributed to diffusive transport across flow paths caused by low recharge rates.

58 GEOSCIENCES↗

Theory and Applications of Macroscale Models in Porous Media

Systems dominated by heterogeneity over a multiplicity of scales, like porous media, still challenge our modeling efforts. The presence of disparate length- and time-scales that control dynamical processes in porous media hinders not only models predictive capabilities, but also their computational efficiency. Macrosopic models, i.e., averaged representations of pore-scale processes, are computationally efficient alternatives to microscale models in the study of transport phenomena in porous media at the system, field or device scale (i.e., at a scale much larger than a characteristic pore size). We present an overview of common upscaling methods used to formally derive macroscale equations from pore-scale (mass, momentum and energy) conservation laws. This review includes the volume averaging method, mixture theory, thermodynamically constrained averaging, homogenization, and renormalization group techniques. We apply these methods to a number of specific problems ranging from food processing to human bronchial system, and from diffusion to multiphase flow, to demonstrate the methods generality and flexibility in handling different applications. The primary intent of such an overview is not to provide a thorough review of all currently available upscaling techniques, nor a complete mathematical treatment of the ones presented, but rather a primer on some of the tools available for upscaling, the basic principles they are based upon, and their specific advantages and drawbacks, so to guide the reader in the choice of the most appropriate method for particular applications and of the most relevant technical literature.

42 ENGINEERING↗

Antimicrobial activity and mechanism of the human milk-sourced peptide Casein201

Introduction: Casein201 is one of the human milk sourced peptides that differed significantly in preterm and full-term mothers. This study is designed to demonstrate the biological characteristics, antibacterial activity and mechanisms of Casein201 against common pathogens in neonatal infection. Methodology: The analysis of biological characteristics was done by bioinformatics. Disk diffusion method and flow cytometry were used to detect the antimicrobial activity of Casein201. Killing kinetics of Casein201 was measured using microplate reader. The antimicrobial mechanism of Casein201 was studied by electron microscopy and electrophoresis. Results: Bioinformatics analysis indicates that Casein201 derived from β-casein and showed significant sequence overlap. Antibacterial assays showed Casein201 inhibited the growth of S taphylococcus aureus and Y ersinia enterocolitica. Ultrastructural analyses revealed that the antibacterial activity of Casein201 is through cytoplasmic structures disintegration and bacterial cell envelope alterations but not combination with DNA. Conclusion: We conclude the antimicrobial activity and mechanism of Casein201. Our data demonstrate that Casein201 has potential therapeutic value for the prevention and treatment of pathogens in neonatal infection.

60 APPLIED LIFE SCIENCES↗

Effects of turbulent flow regime on perforated plate stabilized piloted lean premixed flames

An experimental study of the effects of turbulent flow regime on the flame structure is conducted by using perforated-plate-stabilized, hydrogen-piloted, lean premixed methane/air turbulent flames. The underlying turbulent flow field was investigated using two-dimensional three-component particle imaging velocimetry (2D3C-PIV) with two perforated plates of different blockage ratios. The flow data allowed a separation of the turbulent flow regime into axial velocity stream dominated and vortex dominated flows. A plate with 62% blockage ratio was used to establish the stream-dominated flow regime and another with 86% blockage ratio was used to establish the vortex-dominated flow regime. OH laser-induced fluorescence was used to study the effects of the turbulent flow regime on the mean progress variable, flame brush thickness, flame surface density, and global consumption speed. In comparison with the stream-dominated flow, the vortex-dominated flow makes a wider and shorter flame. Also, the vortex-dominated flow has a thicker horizontal flame brush and a thinner longitudinal flame brush. Especially, the spatial variation of the horizontal flame brush thickness for the vortex-dominated flow does not follow the turbulent diffusion theory. The vortex-dominated flow shows a relatively constant flame surface density and the stream-dominated flow shows a decreasing flame surface density along the streamwise direction. The flame surface density for the vortex-dominated flow is higher than the one for the stream-dominated flow. Lastly, the vortex-dominated turbulent flow shows a much higher consumption speed in comparison with that of the stream-dominated turbulent flow with identical velocity fluctuation levels.

42 ENGINEERING↗

Mercury contaminated sediment sites—An evaluation of remedial options

Mercury (Hg) is a naturally-occurring element that is ubiquitous in the aquatic environment. Though efforts have been made in recent years to decrease Hg emissions, historically-emitted Hg can be retained in the sediments of aquatic bodies where they may be slowly converted to methylmercury (MeHg). Consequently, Hg in historically-contaminated sediments can result in high levels of significant exposure for aquatic species, wildlife and human populations consuming fish. Even if source control of contaminated wastewater is achievable, it may take a very long time, perhaps decades, for Hg-contaminated aquatic systems to reach relatively safe Hg levels in both water and surface sediment naturally. It may take even longer if Hg is present at higher concentration levels in deep sediment. Hg contaminated sediment results from previous releases or ongoing contributions from sources that are difficult to identify. Due to human activities or physical, chemical, or biological processes (e.g. hydrodynamic flows, bioturbation, molecular diffusion, and chemical transformation), the buried Hg can be remobilized into the overlying water. Hg speciation in the water column and sediments critically affect the reactivity (i.e. conversion of inorganic Hg(II) to MeHg), transport, and its exposure to living organisms. Also, geochemical conditions affect the activity of methylating bacteria and its availability for methylation. This review paper discusses remedial considerations (e.g. key chemical factors in fate and transport of Hg, source characterization and control, environmental management procedures, remediation options, modeling tools) and includes practical case studies for cleaning up Hg-contaminated sediment sites. -- Highlights: ► Managing mercury-contaminated sediment sites are challenging to remediate. ► Remediation technologies are making a difference in managing these sites. ► Partitioning plays a dominant role in the distribution of mercury species. ► Mathematical models can be used to help us understand the chemistry and processes.

60 APPLIED LIFE SCIENCES↗