Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Spectral variability in early-type binary X-ray systems

Theoretical models for the ionization of trace elements in a strong stellar wind by a compact binary X-ray source and for the resulting orbital phase dependence of the emergent soft X-ray spectra and the profiles of ultraviolet resonance lines are presented. Model results agree qualitatively with the X-ray and ultraviolet spectra of the system 4U 0900-40/HD 77581 and explain the suppression of the absorption profiles of the Si IV upsilon 1394 and C IV upsilon 1548 lines when the X-ray sources is in front of the star. The model predicts that the absorption profiles of the N V upsilon 1239 and O VI upsilon 1032 lines will be enhanced rather than suppressed during this orbital phase. We predict phase-dependent linear polarization in the resonance lines profiles. Future observations of these phase dependent effects in early-type binary X-ray systems may be used to investigate the dynamics of stellar winds and their interactions with the X-ray source.

Mccray, R.↗

Decimetric type III radio bursts and associated hard X-ray spikes

For a relatively weak solar flare on August 6, 1981, at 10:32 UT, a detailed comparison is made between hard X-ray spikes and decimetric type III radio bursts. The hard X-ray observations are made at energies above 30 keV, and the radio data are obtained in the frequency range from 100 to 1000 MHz. The time resolution for all the data sets is approximately 0.1 s or better. The dynamic radio spectrum exhibits many fast drift type III radio bursts with both normal and reverse slope, whereas the X-ray time profile contains many well resolved short spikes with durations less than or equal to 1 s. Some of the X-ray spikes are seen to be associated in time with reverse-slope bursts, indicating either that the electron beams producing the radio burst contain two or three orders of magnitude more fast electrons than has previously been assumed or that the electron beams can induce the acceleration of additional electrons or occur in coincidence with this acceleration. A case is presented in which a normal slope radio burst at approximately 600 MHz occurs in coincidence with the peak of an X-ray spike to within 0.1 s.

Dennis, B. R.↗

Small-scale cyclones on the periphery of a Gulf Stream warm-core ring

Small-scale cyclones found around Gulf Stream warm-core ring 82B are investigated by using infrared satellite images and current information obtained with an acoustic-Doppler velocimeter. Currents in these cyclones reveal speeds ranging from 20 to 80 cm/s. One small cyclone or 'ringlet' found in June 1982 was studied extensively by removing the basic rotational velocities of 82B. The azimuthal velocity field for this ringlet was used with the gradient current equation to calculate the absolute dynamic topography at 100 dbar. It was found that the ringlet was 13 dyn-cm lower than its surroundings. In addition, neglect of the centrifugal term would have changed the dynamic topography of the ringlet by 30 percent. From a comparison with CTD data the absolute reference level was determined, and a vertical profile of horizontal currents was calculated for the ringlet. Other cyclones were found throughout the slope water region around warm-core ring 82B with observable lifetimes of 1 to 2 weeks. The northeast quadrant of 82B was a favored generation site for ringlets. Two cyclones were observed to form in this region and were advected anticyclonically around 82B. Typically, at any one time, six cyclones with diameters of approximately 40 to 50 km can be detected north of the Gulf Stream by using satellite images.

Kennelly, M. A.↗

Thermospheric production of O(1S) by dissociative recombination of vibrationally excited O2(+)

High spectral resolution line profiles at 5577 A of the nighttime, F-region O(1S) emission measured by the Fabry-Perot interferometer on board the Dynamics Explorer satellite are analyzed using a continuous O(1S) relaxation model. The model is an improvement over the previous model of Killeen and Hays (1981) in that energy loss via elastic collision is considered in addition to the single collision, excitation exchange thermalization process. The results show that the active channel for O(1S) production is capture into the 1Sigma(+)u repulsive state of O2 and that the main contributor to its production is the dissociative recombination of O2(+) ions in vibrational levels v = 1 and 2 in agreement with the quantal calculations of Guberman (1983).

Yee, Jeng-Hwa↗

A one-dimensional multispecies magnetohydrodynamic model of the dayside ionosphere of Mars

A one-dimensional multispecies magnetohydrodynamic model of the Martian ionosphere is developed using methods similar to those used by Shinagawa and Cravens (1988) for Venus, and is used to examine the nature of the solar wind interaction with the Martian ionosphere. The four ion species included in the model are CO2(+), O2(+), O(+), and H(+). Scenarios with and without a small intrinsic field are modeled for the Viking conditions (solar minimum). It was found that the inclusion of an intrinsic magnetic field does not improve the agreement between the calculated ion density profiles and the measured ones. The results also indicate that large horizontal plasma motions must be present at high altitudes, indicating that the dynamics of the upper ionosphere of Mars is controlled by the solar wind.

Shinagawa, H.↗

Radio observations of the planets - The importance of laboratory measurements

Laboratory data on the line broadening parameters of H2S gas under Uranian/Neptunian conditions, on the far wings of the H2S and NH3 line profiles, and on the dielectric properties of CH4-, NH3-, H2S-, and NH4SH-ice are needed to constrain elemental abundances and understand the dynamics and cloud physics in the atmospheres of the giant planets. Measurements of the absorption coefficient of gaseous H2SO4 at millimeter wavelengths are needed in order to obtain a better understanding of Venus' atmosphere. To determine wind velocity fields in Venus' and Mars' atmospheres, accurate measurements of the center frequencies of the CO lines are necessary. The absorption and scattering properties of lunar soils and/or terrestrial rock powders at frequencies from approximately 1 to 200 GHz, determined in laboratory experiments, would provide a valuable addition to existing data at 450 MHz, 35 GHz, and far infrared frequencies. These data would be used to analyze the microwave spectra of planetary surfaces. Such studies may be helpful in distinguishing the effects of radiative transfer from those of nonlinear heat conduction and internal heat sources.

De Pater, Imke↗

X33 Reusable Launch Vehicle Control on Sliding Modes: Concepts for a Control System Development

Control of the X33 reusable launch vehicle is considered. The launch control problem consists of automatic tracking of the launch trajectory which is assumed to be optimally precalculated. It requires development of a reliable, robust control algorithm that can automatically adjust to some changes in mission specifications (mass of payload, target orbit) and the operating environment (atmospheric perturbations, interconnection perturbations from the other subsystems of the vehicle, thrust deficiencies, failure scenarios). One of the effective control strategies successfully applied in nonlinear systems is the Sliding Mode Control. The main advantage of the Sliding Mode Control is that the system's state response in the sliding surface remains insensitive to certain parameter variations, nonlinearities and disturbances. Employing the time scaling concept, a new two (three)-loop structure of the control system for the X33 launch vehicle was developed. Smoothed sliding mode controllers were designed to robustly enforce the given closed-loop dynamics. Simulations of the 3-DOF model of the X33 launch vehicle with the table-look-up models for Euler angle reference profiles and disturbance torque profiles showed a very accurate, robust tracking performance.

Shtessel, Yuri B.↗

Density Irregularities Inside the Plasmasphere: Cluster Observations

The electron density profiles derived from the EFW and WHISPER instruments onboard the four Cluster spacecraft reveal small-scale density irregularities inside the plasmasphere and at its outer boundary, the plasmapause. We review statistics of the plasmapause position and thickness, as well as statistics of these density structures. We focus on a particular plasmasphere crossing on 11 April 2002, with several density irregularities, as well as two plasma tails, observed by Cluster on the legs of the inbound and outbound passes. We derive the density gradient vectors from simultaneous density measurements by the four spacecraft. We determine also the normal velocity of the surface of these irregularities, assuming they are planar boundaries, from the time delays between density structures in the four individual density profiles. These new observations yield novel insights about (1) the dimensions of plasma irregularities across and parallel to magnetic field lines, (2) the dynamics of these small-scale structures, (3) their bulk velocities, and (4) their position and distribution as a function of the magnetic local time (MLT) and the geomagnetic conditions (as determined by Kp).

Darrouzet, F.↗

Minimum-Time and Vibration Avoidance Attitude Maneuver for Spacecraft with Torque and Momentum Limit Constraints in Redundant Reaction Wheel Configuration

In this paper, we present an optimal open-loop slew trajectory algorithm developed at GSFC for the so-called "Yardstick design" of the James Webb Space Telescope (JWST). JWST is an orbiting infrared observatory featuring a lightweight, segmented primary mirror approximately 6 meters in diameter and a sunshield approximately the size of a tennis court. This large, flexible structure will have significant number of lightly damped, dominant flexible modes. With very stringent requirements on pointing accuracy and image quality, it is important that slewing be done within the required time constraint and with minimal induced vibration in order to maximize observing efficiency. With reaction wheels as control actuators, initial wheel speeds as well as individual wheel torque and momentum limits become dominant constraints in slew performance. These constraints must be taken into account when performing slews to ensure that unexpected reaction wheel saturation does not occur, since such saturation leads to control failure in accurately tracking commanded motion and produces high frequency torque components capable of exciting structural modes. A minimum-time constraint is also included and coupled with reaction wheel limit constraints in the optimization to minimize both the effect of the control torque on the flexible body motion and the maneuver time. The optimization is on slew command parameters, such as maximum slew velocity and acceleration, for a given redundant reaction wheel configuration and is based on the dynamic interaction between the spacecraft and reaction wheel motion. Analytical development of the slew algorithm to generate desired slew position, rate, and acceleration profiles to command a feedback/feed forward control system is described. High-fidelity simulation and experimental results are presented to show that the developed slew law achieves the objectives.

Ha, Kong Q.↗

Rendezvous and Proximity Operations of the Space Shuttle

Space Shuttle rendezous missions presented unique challenges that were not fully recognized when the Shuttle was designed. Rendezvous targets could be passive (i.e., no lights or transponders), and not designed to facilitate Shuttle rendezvous, proximity operations and retrieval. Shuttle reaction control system jet plume impingement on target spacecraft presented induced dynamics, structural loading and contamination concerns. These issues, along with limited forward reaction control system propellant, drove a change from the Gemimi/Apollo coelliptic profile heritage to a stable orbit profile, and the development of new proximity operations techniques. Multiple scientific and on-orbit servicing missions and crew exchange, assembly and replinishment flights to Mir and to the International Space Station drove further profile and piloting technique changes, including new relative navigation sensors and new computer generated piloting cues.

Goodman, John L.↗

Watershed and Hydrodynamic Modeling for Evaluating the Impact of Land Use Change on Submerged Aquatic Vegetation and Seagrasses in Mobile Bay

There is a continued need to understand how human activities along the northern Gulf of Mexico coast are impacting the natural ecosystems. The gulf coast is experiencing rapid population growth and associated land cover/land use change. Mobile Bay, AL is a designated pilot region of the Gulf of Mexico Alliance (GOMA) and is the focus area of many current NASA and NOAA studies, for example. This is a critical region, both ecologically and economically to the entire United States because it has the fourth largest freshwater inflow in the continental USA, is a vital nursery habitat for commercially and recreational important fisheries, and houses a working waterfront and port that is expanding. Watershed and hydrodynamic modeling has been performed for Mobile Bay to evaluate the impact of land use change in Mobile and Baldwin counties on the aquatic ecosystem. Watershed modeling using the Loading Simulation Package in C++ (LSPC) was performed for all watersheds contiguous to Mobile Bay for land use Scenarios in 1948, 1992, 2001, and 2030. The Prescott Spatial Growth Model was used to project the 2030 land use scenario based on observed trends. All land use scenarios were developed to a common land classification system developed by merging the 1992 and 2001 National Land Cover Data (NLCD). The LSPC model output provides changes in flow, temperature, sediments and general water quality for 22 discharge points into the Bay. These results were inputted in the Environmental Fluid Dynamics Computer Code (EFDC) hydrodynamic model to generate data on changes in temperature, salinity, and sediment concentrations on a grid with four vertical profiles throughout the Bay s aquatic ecosystems. The models were calibrated using in-situ data collected at sampling stations in and around Mobile bay. This phase of the project has focused on sediment modeling because of its significant influence on light attenuation which is a critical factor in the health of submerged aquatic vegetation. The impact of land use change on sediment concentrations was evaluated by analyzing the LSPC and EFDC sediment simulations for the four land use scenarios. Such analysis was also performed for storm and non-storm periods. In- situ data of total suspended sediments (TSS) and light attenuation were used to develop a regression model to estimate light attenuation from TSS. This regression model was used to derive marine light attenuation estimates throughout Mobile bay using the EFDC TSS outputs. The changes in sediment concentrations and associated impact on light attenuation in the aquatic ecosystem were used to perform an ecological analysis to evaluate the impact on seagreasses and Submerged Aquatic Vegetation (SAV) habitat. This is the key product benefiting the Mobile Bay coastal environmental managers that integrates the influences of sediments due to land use driven flow changes with the restoration potential of SAVs.

Estes, Maurice G.↗

A Pragmatic Path to Investigating Europa's Habitability

Assessment of Europa's habitability, as an overarching science goal, will progress via a comprehensive investigation of Europa's subsurface ocean, chemical composition, and internal dynamical processes, The National Research Council's Planetary Decadal Survey placed an extremely high priority on Europa science but noted that the budget profile for the Jupiter Europa Orbiter (1EO) mission concept is incompatible with NASA's projected planetary science budget Thus, NASA enlisted a small Europa Science Definition Team (ESDT) to consider more pragmatic Europa mission options, In its preliminary findings (May, 2011), the ESDT embraces a science scope and instrument complement comparable to the science "floor" for JEO, but with a radically different mission implementation. The ESDT is studying a two-element mission architecture, in which two relatively low-cost spacecraft would fulfill the Europa science objectives, An envisioned Europa orbital element would carry only a very small geophysics payload, addressing those investigations that are best carried out from Europa orbit An envisioned separate multiple Europa flyby element (in orbit about Jupiter) would emphasize remote sensing, This mission architecture would provide for a subset of radiation-shielded instruments (all relatively low mass, power, and data rate) to be delivered into Europa orbit by a modest spacecraft, saving on propellant and other spacecraft resources, More resource-intensive remote sensing instruments would achieve their science objectives through a conservative multiple-flyby approach, that is better situated to handle larger masses and higher data volumes, and which aims to limit radiation exposure, Separation of the payload into two spacecraft elements, phased in time, would permit costs to be spread more uniformly over mUltiple years, avoiding an excessively high peak in the funding profile, Implementation of each spacecraft would be greatly simplified compared to previous Europa mission concepts, minimizing new development while achieving the key Europa science objectives. We will report on the status of this evolving concept, and will solicit community feedback, as we pursue an innovative and low-cost ways to explore Europa and investigate its habitability.

Pappalardo↗

Space Technology 5 Multipoint Observations of Temporal and Spatial Variability of Field-Aligned Currents

Space Technology 5 (ST5) is a constellation mission consisting of three microsatellites. It provides the first multipoint magnetic field measurements in low Earth orbit, which enables us to separate spatial and temporal variations. In this paper, we present a study of the temporal variability of field-aligned currents using the ST5 data. We examine the field-aligned current observations during and after a geomagnetic storm and compare the magnetic field profiles at the three spacecraft. The multipoint data demonstrate that mesoscale current structures, commonly embedded within large-scale current sheets, are very dynamic with highly variable current density and/or polarity in approx.10 min time scales. On the other hand, the data also show that the time scales for the currents to be relatively stable are approx.1 min for mesoscale currents and approx.10 min for large-scale currents. These temporal features are very likely associated with dynamic variations of their charge carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of mesoscale field-aligned currents are found to be consistent with those of auroral parallel electric field.

Le, G.↗

Realistic Modeling of Interaction of Quiet-Sun Magnetic Fields with the Chromosphere

High­‐resolution observations and 3D MHD simulations reveal intense interaction between the convection zone dynamics and the solar atmosphere on subarcsecond scales. To investigate processes of the dynamical coupling and energy exchange between the subsurface layers and the chromosphere we perform 3D radiative MHD modeling for a computational domain that includes the upper convection zone and the chromosphere, and investigate the structure and dynamics for different intensity of the photospheric magnetic flux. For comparison with observations, the simulation models have been used to calculate synthetic Stokes profiles of various spectral lines. The results show intense energy exchange through small­‐scale magnetized vortex tubes rooted below the photosphere, which provide extra heating of the chromosphere, initiate shock waves, and small­‐scale eruptions.

quiet-sun↗

Improved Prediction of Losses with Large Eddy Simulation in a Low-Pressure Turbine

There is a need to improve predictions of losses resulting from large eddy simulations (LES) of low-pressure turbines (LPT) in gas turbines. This may be done by assessing the accuracy of predictions against validation data and understanding the source of any inaccuracies. LES is a promising approach for capturing the laminar/turbulent transition process in a LPT. In previous studies, the authors utilized LES to model the flow field over a Variable Speed Power Turbine (VSPT) blade and successfully captured characteristic features of separation/reattachment and transition on the suction side at both the cruise (positive incidence) and take-off conditions (negative incidence) and as well, simulated the effect of freestream turbulence (FST) on those phenomena. The predicted pressure loading profiles agreed well with the experimental data for both a high and a low FST case at a Reynolds number of Reex=220,000. In this paper, we present wake profiles resulting from computations for a range of FST values. Although the predicted wake profiles for the lowest FST case (Tu=0.5%) matched the experimental data, at higher FST (Tu=10-15%,) the wake was wider than the experimentally measured wake and for both cases were displaced laterally when compared to the experimental measurements. In our investigation of the causes of the said discrepancies we have identified important effects which could strongly influence the predicted wake profile. Predicted losses were improved by assuring the validity of the flow solution. This was done by utilizing spectral analysis to scrutinize the dynamic behavior of the wake and determine solution accuracy resulting from low mesh density and low accuracy of convective modeling.

CFD↗

Improved Prediction of Losses with Large Eddy Simulation in a Low-Pressure Turbine

There is a need to improve predictions of losses resulting from large eddy simulations (LES) of low-pressure turbines (LPT) in gas turbines. This may be done by assessing the accuracy of predictions against validation data and understanding the source of any inaccuracies. LES is a promising approach for capturing the laminar/turbulent transition process in a LPT. In previous studies, the authors utilized LES to model the flow field over a Variable Speed Power Turbine (VSPT) blade and successfully captured characteristic features of separation/reattachment and transition on the suction side at both the cruise (positive incidence) and take-off conditions (negative incidence) and as well, simulated the effect of free-stream turbulence (FST) on those phenomena. The predicted pressure loading profiles agreed well with the experimental data for both a high and a low FST case at a Reynolds number of Re(ex)=220,000. In this paper, we present wake profiles resulting from computations for a range of FST values. Although the predicted wake profiles for the lowest FST case (Tu=0.5%) matched the experimental data, at higher FST (Tu=10-15%,) the wake was wider than the experimentally measured wake and for both cases were displaced laterally when compared to the experimental measurements. In our investigation of the causes of the said discrepancies we have identified important effects which could strongly influence the predicted wake profile. Predicted losses were improved by assuring the validity of the flow solution. This was done by utilizing spectral analysis to scrutinize the dynamic behavior of the wake and determine solution accuracy resulting from low mesh density and low accuracy of convective modeling.

LES-LDKM↗

Ensemble Forecasting/Assimilation/Emissions Estimation with WRF-Chem/DART: Accomplishments, Lessons Learned, and Future Plans

Over the past ten years, we have been conducting research on regional ensemble atmospheric composition forecasting/data assimilation/emissions estimation with WRF-Chem/DART. WRF- Chem/DART integrates the Weather Research and Forecasting model (WRF) with online chemistry (WRF-Chem) into the Data Assimilation Research Testbed (DART). DART is an ensemble data assimilation system based on the ensemble adjustment Kalman filter (EAKF) with adaptive inflation, localization (physical and state space), and an optional non-Gaussian formulation of the EAKF. DART includes assimilation of meteorological and limited chemical observations. WRF-Chem/DART extends DART to include assimilation of: MOPITT CO; IASI CO and O3; MODIS AOD; OMI O3, NO2, and SO2; TROPOMI CO, O3, NO2, and SO2, TES CO, CO2 (research mode), O3, NH3, and CH4 (research mode); CrIS CO, O3, NH3, CH4 (research mode), and PAN; SCIAMACHY NO2; GOME2a NO2; MLS O3 and HNO3; and proxy TEMPO O3, and NO2 satellite retrievals as raw retrievals or as ‘compact phase space retrievals’ (CPSRs) for profile retrievals. WRF-Chem/DART also assimilates in situ atmospheric composition measurements and uses the ‘state augmentation method’ for emissions estimation. In our presentation, we will provide an overview of WRF-Chem/DART: • applications and results; • lessons learned from: (i) independent versus joint assimilation; (ii) total/partial column versus profile retrieval assimilation; (iii) joint in situ and retrieval assimilation; (iv) assimilation at grid resolutions ranging from 100 km to 4 km; (v) dynamic emissions estimation; and • future work related to wildfire emissions estimation and intercomparison of CMAQ (online)/JEDI and CMAQ (online and offline)/DART.

WRF-Chem/DART↗

Supersonic Flight Testing to Assess Ground Recording Systems for NASA's Low Boom Flight Demonstrator

The National Aeronautics and Space Administration (NASA) has performed two supersonic flight test campaigns in preparation for the extensive ground measurements that will be taken during Quesst Phase 2 to verify the low boom from the X-59. The first test campaign was Carpet Determination In Entirety Measurements (CarpetDIEM) Phase II, with F/A-18B aircraft and a subscale ground sensor array and the second campaign was CarpetDIEM Phase III,with both F-15B and F/A-18D aircraft and a geographically large scale ground sensor array. CarpetDIEM Phase II served to evaluate prototypes of the state-of-the-art Ground Recording System (GRS) which NASA is developing in order to record the low boom of X-59. The prototype GRS measured both N-wave and evanescent wave sonic booms which were1.4±1.1PLdB from co-located truth sources during these flights. CarpetDIEM Phase II was also used to down select two NASA developed unattended trigger concepts, one based on Automatic Dependent Surveillance-Broadcast (ADS-B) and the other utilizing satellite communications. Both unattended trigger concepts performed well, with the ADS-B based concept being chosen at the conclusion of CarpetDIEM Phase II for integration with the GRS. CarpetDIEM Phase III was primarily a logistics risk-reduction effort for Quesst Phase 2, but also sought to evaluate the capabilities, including the newly implemented ADS-B unattended trigger, and ruggedness of the GRS during a long-term deployment. The F-15B stood in for the X-59, flying two different X-59flight profiles, including an accelerating climb maneuver. The GRS successfully self-triggered to capture 80% of sonic booms generated from both steady and dynamic flight maneuvers. Low booms, defined by the project as being≤80 PLdB, were recorded by the GRS near the end of CarpetDIEM Phase III. The GRS measured low booms were found to be within0.4±0.1PLdB of a co-located truth source.

Forrest L Carpenter IV↗