Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Effects of temperature and near-substrate plasma density on the structural and electrical properties of dc sputtered germanium thin films

Germanium thin films were deposited by dc reactive magnetron sputtering as a function of substrate temperature and ion flux using an unbalanced magnetron with an external magnetic field. The ion flux and energy distribution were measured using a retarding field energy analyzer (RFEA), a flat probe with a guard ring, and cylindrical Langmuir probes. The RFEA ion flux, the flat probe saturation currents, and the ion densities inferred from the cylindrical probe data are in very good agreement over a wide range of plasma densities, which were varied both by the external coil current and discharge power. The RFEA ion energy distributions are in good agreement with the plasma potentials inferred from the cylindrical probes, and suggest that the nonuniformity of the plasma in the vicinity of the substrate holder should be considered in the interpretation of probe results in these systems. The deposited films were characterized by x-ray diffraction, Raman spectroscopy, optical transmission, resistivity, and Hall effect measurements. Under low ion bombardment conditions, an abrupt onset of the crystalline phase with respect to temperature is observed in the Raman and x-ray diffraction measurements, and the crystal quality increases with increasing temperature above the transition temperature. The transition is also accompanied by a sharp decrease in film resistivity. The microcrystalline films have a strong preferential orientation in the (220) direction, and are p type with carrier densities in the range 10{sup 18} cm{sup -3} and mobilities in the range 15-30 cm{sup 2}/V-s. The structural and electronic properties of the films are sensitive to the ion flux. Near the transition temperature the effects of increasing ion flux can be attributed to the small temperature rise that accompanies the higher plasma density. At higher temperatures the increased ion flux results in a more random crystallographic orientation, with significantly lower carrier concentrations and only slightly lower carrier mobilities, implying either a reduction in acceptor defect density and/or the creation of compensating n-type defects.

36 MATERIALS SCIENCE↗

Structural and Electrical Properties of P--Type ZnO Thin Films

The codoped ZnO thin film were deposited by DC magnetron sputtering on silicon (111) followed by annealing treatment at 200 deg. C to 600 deg. C for 1 hour in nitrogen and oxygen gas mixture. P-type conduction of Al-N codoped ZnO thin films were obtained at 300 deg. C with the lowest resistivity of 3.412x10{sup -3} {omega}{center_dot}cm and highest carrier concentration of 1.54x10{sup 22} cm{sup -3}. Structural investigation was carried out by atomic force microscope (AFM) and X-ray diffraction (XRD). Results showed that heat treatment had influenced the structure of the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} antiferroelectric thin films on TiO{sub 2} buffer layer

Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} antiferroelectric thin films with thickness of 500 nm were successfully deposited on TiO{sub 2} buffered Pt(1 1 1)/Ti/SiO{sub 2}/Si(1 0 0) and Pt(1 1 1)/Ti/SiO{sub 2}/Si(1 0 0) substrates via sol-gel process. Microstructure of Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} thin films was studied by X-ray diffraction analyses. The antiferroelectric nature of the Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} thin films was confirmed by the double hysteresis behaviors of polarization and double buffer fly response of dielectric constant versus applied voltage at room temperature. The capacitance-voltage behaviors of the Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} films with and without TiO{sub 2} buffer layer were studied, as a function of temperature. The temperature dependence of dielectric constant displayed a similar behavior and the Curie temperature (T{sub c}) was 193 deg. C for films on both substrates. The current caused by the polarization and depolarization of polar in the Pb{sub 0.97}La{sub 0.02}(Zr{sub 0.95}Ti{sub 0.05})O{sub 3} films was detected by current density-electric field measurement.

36 MATERIALS SCIENCE↗

Electrical properties of praseodymium oxide doped Boro-Tellurite glasses

Glasses of the composition xPr{sub 6}O{sub 11}- (35-x)TeO{sub 2}-65B{sub 2}O{sub 3} (x=0, 0.1 to 0.5 mol %) have been prepared using the melt quenching method. The ac and dc conductivity of glass have been measured over a wide range of frequencies and temperatures. Experimental results indicate that the ac conductivity depend on temperature, frequency and Praseodymium content. The conductivity as a function of frequency exhibited two components: dc conductivity (σ{sub dc}), and ac conductivity (σ{sub ac}). The activation energies are estimated and found to be decreases with composition. The impedance plot at each temperature appeared as a semicircle passes through the origin.

36 MATERIALS SCIENCE↗

Macroscopic and electric properties in the CdTe-AgI-As2Se3 system

Highlights: • Macroscopic properties of the pseudo-ternary CdTe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses. • Non-monotonic glass transition behaviour with increasing CdTe content. • Conductivity measurements of the pseudo-ternary CdTe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses. • Decrease of the Ag{sup +} ion transport in the CdTe-AgI-As{sub 2}Se{sub 3} glasses. • Blockage of silver-related preferential conduction pathways by Cd{sup 2+}. - Abstract: Chalcohalide glasses in the CdTe-AgI-As{sub 2}Se{sub 3} system were synthesised and characterised for the first time. Measurements including density, X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were performed. The glass-forming range for (CdTe){sub x}(AgI){sub 0.5-x/2}(As{sub 2}Se{sub 3}){sub 0.5-x/2} compositions was found to be limited to x ≤ 0.25. The characteristic glass transition T{sub g}, crystallisation T{sub x}, and melting T{sub m} temperatures of the synthesised glasses are reported and the criteria, ΔT = T{sub x}-T{sub g}, was calculated to evaluate the glass forming ability. Total electric conductivity measurements have shown that the room temperature conductivity decreases drastically with increasing x accompanied by a simultaneous increase of the activation energy. The decrease in the Ag{sup +} ion transport cannot be explained by reduction in the total silver concentration alone and a possible structural origin of conductivity changes was proposed and discussed.

36 MATERIALS SCIENCE↗

Zirconium nitride films deposited in (Ar + N{sub 2} + H{sub 2}) sputtering atmosphere: Optical, structural, and electrical properties

Zr-N films were grown on glass substrates via radio-frequency magnetron sputtering using an Ar + N{sub 2} + H{sub 2} mixture. Hydrogen was employed in order to reduce oxygen contamination coming from background pressure, as confirmed by secondary ion mass spectroscopy analysis. The tuned process parameter was the nitrogen flux percentage (R{sub N2}) in the mixture. The crystallographic structure of the films was studied using x-ray diffraction. The measurements show that the films deposited at low R{sub N2} (lower than or equal to 50%) crystallize in the rocksalt ZrN structure. As R{sub N2} exceeds 50%, the film exhibits the co-presence of ZrN and Zr{sub 3}N{sub 4} (denoted as o-Zr{sub 3}N{sub 4}) phases. When the deposition is performed in only nitrogen atmosphere (R{sub N2} = 100%), a broad peak located at 2{theta}{approx_equal} 32.2 deg. is mainly attributed to the contribution coming from (320) planes of the o-Zr{sub 3}N{sub 4}. An envelope method, based on the optical reflection and transmission spectra taken at normal incidence, has been applied for the optical characterization of the nitride films. Such a method allows the determination of the samples' average thickness and optical constants (refractive index n and extinction coefficient k) in the ultraviolet-visible-near infrared regions. The evaluated thickness was about 2500 nm, which is in good agreement with the value obtained from profilometry. The absorption coefficient {alpha} was calculated from reflectance and transmittance spectra. The energy bandgap ranges from 2.3 eV to 2.4 eV. Electrical characterization was performed using capacitance-voltage measurements, which showed that the films evolve from insulating to semiconductor behavior when the nitrogen content in the sputtering atmosphere is decreased, confirming structural and optical results.

36 MATERIALS SCIENCE↗

Surface structure and electrical properties of solution processed lanthanum nickelate films

Conducting oxides with perovskite crystal structure have many advantages over the simple Pt or Au, Pt based metal bottom electrodes (BE), particularly in fabrication of ferroelectric as well as resistive random access memory devices, if they possess smooth surface morphology. LaNiO{sub 3} (LNO) thin films were prepared by modified chemical solution deposition method. Precursor solutions were spin coated onto SiO{sub 2}-substrates. Deposited layers were thermally treated in a pre-heated furnace at 550 °C and oxygenated up to 800 °C. Results of AFM and FESEM showed that films are very smooth (Ra = 1.69 nm), dense, crack-free and with monodispersed nanocrystallites. Growth conditions such as spinning rate, annealing rates and temperatures etc. have been optimized for mono dispersed crystallinity with very smooth surface morphology. Sheet resistivity, carrier concentration and RMS roughness were correlated with growth temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational study on electrical properties of transition metal dichalcogenide field-effect transistors with strained channel

The performance limits of monolayer transition metal dichalcogenide (TMDC) field-effect transistors (FETs) with isotropic biaxial strain were examined with the “top-of-the-barrier” ballistic MOSFET model. Using a first-principle theory, we calculated the band structures and density of states of strained monolayer MoS{sub 2} and WS{sub 2}, and used the results in model calculations. Introducing strain moves the positions of the conduction band minimum and valence band maximum in k-space with resultant variation in the effective mass and population of carriers. Introducing 2% tensile strain into n-type MoS{sub 2} FETs decreases the electron effective mass and, at the same time, increases energy separation between the lower and the higher valleys in the conduction band, resulting in 26% improvement of the ON current up to 1260 A/m. Whereas compressive strain results in complicated effects, −2% strain also improves the ON current by 15%. These results suggest that introducing artificial strain is promising to improve TMDC FET performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure dependent electrical properties of Ni-Mg-Cu nano ferrites

Nano ferrites with the general chemical formula Ni{sub 0.5}Mg{sub x}Cu{sub 1-x} Fe{sub 2}O{sub 4} were synthesized by chemical route. They were characterized by x-ray diffraction by powder method. The diffraction patterns confirm the formation of single phase ferrites. The particle size is calculated by Scherrer formula which varies between 20nm to 60nm. DC resistivity was measured as a function of composition from room temperature to 700{sup o} C by two probe method. These ferrites show higher resistivity than those synthesized by ceramic method, due to control over composition and morphology. This leads to the elimination of domain wall resonance so that the materials can work at higher frequencies. AC resistivity was measured as a function of frequency at room temperature. Dielectric dispersion obeys Maxwell - Wagner model, in accordance with Koop’s phenomenological theory. The variation of loss angle follows the variation of ac resistivity with frequency and composition. The change in ac conductivity with frequency obeys the power law σ{sub a} = B.ω{sup n}. Such a behavior suggests that conductivity is due to polarons in all the samples.

36 MATERIALS SCIENCE↗

A comparative study of the electrical properties of Pd/ZnO Schottky contacts fabricated using electron beam deposition and resistive/thermal evaporation techniques

A systematic investigation to check the quality of Pd Schottky contacts deposited on ZnO has been performed on electron beam (e-beam) deposited and resistively/thermally evaporated samples using current-voltage, IV, and conventional deep level transient spectroscopy (DLTS) measurements. Room temperature IV measurements reveal the dominance of pure thermionic emission on the resistively evaporated contacts, while the e-beam deposited contacts show the dominance of generation recombination at low voltages, <0.30 V, and the dominance of pure thermionic emission at high voltages, greater than 0.30 V. The resistively evaporated contacts have very low reverse currents of the order of 10{sup -10} A at a reverse voltage of 1.0 V whereas the e-beam deposited contacts have reverse currents of the order of 10{sup -6} A at 1.0 V. Average ideality factors have been determined as (1.43 {+-} 0.01) and (1.66 {+-} 0.02) for the resistively evaporated contacts and e-beam deposited contacts, respectively. The IV barrier heights have been calculated as (0.721 {+-} 0.002) eV and (0.624 {+-} 0.005) eV for the resistively evaporated and e-beam deposited contacts, respectively. Conventional DLTS measurements reveal the presence of three prominent defects in both the resistive and e-beam contacts. Two extra peaks with energy levels of 0.60 and 0.81 eV below the conduction band minimum have been observed in the e-beam deposited contacts. These have been explained as contributing to the generation recombination current that dominates at low voltages and high leakage currents. Based on the reverse current at 1.0 V, the degree of rectification, the dominant current transport mechanism and the observed defects, we conclude that the resistive evaporation technique yields better quality Schottky contacts for use in solar cells and ultraviolet detectors compared to the e-beam deposition technique. The 0.60 eV has been identified as possibly related to the unoccupied level for the doubly charged oxygen vacancy, V{sub o}{sup 2+}.

36 MATERIALS SCIENCE↗

Morphological–Electrical Property Relation in Cu(In,Ga)(S,Se) 2 Solar Cells: Significance of Crystal Grain Growth and Band Grading by Potassium Treatment

Abstract Solution‐processed Cu(In,Ga)(S,Se) 2 (CIGS) has a great potential for the production of large‐area photovoltaic devices at low cost. However, CIGS solar cells processed from solution exhibit relatively lower performance compared to vacuum‐processed devices because of a lack of proper composition distribution, which is mainly instigated by the limited Se uptake during chalcogenization. In this work, a unique potassium treatment method is utilized to improve the selenium uptake judiciously, enhancing grain sizes and forming a wider bandgap minimum region. Careful engineering of the bandgap grading structure also results in an enlarged space charge region, which is favorable for electron–hole separation and efficient charge carrier collection. Besides, this device processing approach has led to a linearly increasing electron diffusion length and carrier lifetime with increasing the grain size of the CIGS film, which is a critical achievement for enhancing photocurrent yield. Overall, 15% of power conversion efficiency is achieved in solar cells processed from environmentally benign solutions. This approach offers critical insights for precise device design and processing rules for solution‐processed CIGS solar cells.

Kim, Joo‐Hyun↗

Tuning SPT-3G Transition-Edge-Sensor Electrical Properties with a Four-Layer Ti–Au–Ti–Au Thin-Film Stack

We have developed superconducting Ti transition-edge sensors with Au protection layers on the top and bottom for the South Pole Telescope’s third-generation receiver (a cosmic microwave background polarimeter, due to be upgraded this austral summer of 2017/2018). The base Au layer (deposited on a thin Ti glue layer) isolates the Ti from any substrate effects; the top Au layer protects the Ti from oxidation during processing and subsequent use of the sensors. We control the transition temperature and normal resistance of the sensors by varying the sensor width and the relative thicknesses of the Ti and Au layers. The transition temperature is roughly six times more sensitive to the thickness of the base Au layer than to that of the top Au layer. The normal resistance is inversely proportional to sensor width for any given film configuration. For widths greater than five micrometers, the critical temperature is independent of width.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic

Here, the impedance behavior of pre-oxidized iron in liquid lead-bismuth eutectic (LBE) at 200 °C is studied using electrochemical impedance spectroscopy. The structures and resistance of oxide grown on iron oxidized in air at different temperatures and durations are compared. The results show that the resistance of the oxide film increases with increasing oxidizing temperature, due to the formation of a thicker scale and fewer defects. At the same temperature (600 °C), increasing the oxidation time can also reduce the defect concentration in the oxide film and improve the impedance of the oxide scale in LBE.

42 ENGINEERING↗