Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy sciences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Characterization Techniques Lecture Series: X-Ray Diffraction, A Summary of LANL's Materials Capabilities in MPA-11 [Slides]

This presentation provides an overview on X-Ray Diffraction (XRD) to cover background, fundamentals, limitations, best practices, applications, analysis, software, and resources. To summarize: XRD is a great tool for characterizing solid crystalline samples. X-Rays are E-Mag radiation and generate diffraction profiles based on the phase of the sample. Diffraction patterns are unique to the phase of the sample. Powder diffraction gives us better diffraction profiles. We can obtain both qualitative and quantitative data. Analysis requires us to know a little about our sample and a lot about our diffractometer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nurseries Best Practices Guide for Energy and Water Efficiency, Renewable Energy, and Resilience

This guide is a compilation of energy and water efficiency, renewable energy, and resilience best practices at United States Forest Service (USFS) nurseries and seed extractory facilities. The Forest Service Nursery System supports the agency’s mission to restore and retain ecosystem health throughout its 193-million acres and ensures the future of biological diversity on federal lands. This guide was developed in partnership with the U.S. Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL) and is based on pilot analyses at two western nurseries.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

NC State University Industrial Assessment Center. Final Report

This report documents work from the Industrial Assessment Center program at NC State University. The program is funded by the US Department of Energy Advanced Manufacturing Office. The IAC provides energy conservation assessments for small and medium sized manufacturers in NC, SC, and VA. Students are involved in all aspects of the assessment including the on-site visit, interacting with plant personnel, collecting data, performing engineering analyses on potential energy efficiency measures, and producing a technical report for the client.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Building a better framework for evaluating human well-being impacts in global change analysis: The example of energy security

Human well-being can be greatly impacted by the global environmental and socio-economic change captured in Integrated Models of Global Change (IMGCs). Though most IMGCs address some aspects of well-being, their underlying modeling approach and ‘philosophy’ differ widely, and some key elements – like energy security – are omitted. In this report, we describe a project in which we set out to a create a framework through which the well-being dimensions of the household are connected to key drivers of socio-economic and environmental change – and how the needed metrics, data and modeling methods can be brought to bear. We focus on the well-being dimensions of energy, and lay out the necessary elements to capturing household energy security – using household energy burden as the relevant metric. We begin by showing the conceptual linkage of energy burden to environmental drivers like temperature change, using a simple and straightforward conceptual framework. We then go further to use the example of GCAM-USA to show how some key analytical features of the model can provide insight into how energy security across different groups can change along alternative pathways to sustainability. We compare our preliminary assessment of household energy burden to existing data and suggest further steps to improve and refine this analysis in future research.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Innovations in Renewable Energy Technologies, Systems, and Energy Analysis

Costs for renewable energy technologies have declined rapidly in the past decade and their use for residential, commercial, and utility scale electricity has therefore grown exponentially. As the energy mix diversifies, energy analysis becomes increasing important, requiring renewable energy to integrate with other reduced emission energy sources, such as small modular nuclear reactors and carbon capture and utilization. Energy analysis can also explore the expansion of clean energy into new sectors, such as industrial processes and electrification. The U.S. National Renewable Energy Laboratory (NREL) and the Joint Institute for Strategic Energy Analysis (JISEA), which is a partnership of NREL and universities, study the integration and application of clean energy technologies into existing and new sectors. This presentation includes an overview of NREL and JISEA and summarizes innovations in renewable energy technologies and energy systems analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

5G Enabled Energy Innovation: Advanced Wireless Networks for Science

Digital wireless communication has become a foundational technology for the nation. The U.S. Department of Energy’s Office of Science (DOE-SC) is the Nation’s largest supporter of basic research in the physical sciences discovering new materials, designing advanced microelectronics, and understanding the physics of radio frequency signaling. The expanding national rollout of a new fifth-generation (5G) mobile network, coupled with the torrent of scientific data generated by next-generation devices such as battery-powered Internet of Things (IoT) sensors, has created an urgent need to enhance cutting-edge wireless technology. Breakthroughs in the deployment, integration, security, and operational range of wireless networking can provide new scientific capabilities for the next decade - from autonomous mobile instruments for scientific user facilities to intelligent sensors networks distributed over thousands of kilometers to study environmental processes. To realize this promise, however, we must continue to drive innovations in computing, artificial intelligence (AI), advanced materials, high-speed networking, and microelectronics. In March 2020, the DOE-SC convened a workshop to identify the potential opportunities and explore the scientific challenges of advanced wireless technologies.

42 ENGINEERING↗
DOE OSTI2022

The Future of Building Science Education with the U.S. Department of Energy Solar Decathlon: Preprint

Experience the future of Building Science Education with the U.S. Department of Energy Solar Decathlon, from community-focused designs to real-life innovative zero energy buildings constructed by students. In this paper, we will introduce the Solar Decathlon programs and a reimagined Building Science Education curriculum that is transforming education to inspire future building design professionals and bring sustainable, equitable design and construction strategies to the real world. The Solar Decathlon is a collegiate-level building design competition that challenges students in 10 Contests, from embodied environmental impact to affordability and resilience. We will cover the structure of the competition and its two Challenges - the Build Challenge and the Design Challenge - as well as additional programs that impact all aspects of the buildings industry. These programs include the Solar Decathlon Building Science Education course, a free online video series that provides students and working professionals with building science fundamentals; the Design Partners Program, which connects innovative student design teams and local building owners seeking low-risk, low-cost opportunities to incorporate sustainable design alternatives into their building portfolio; and Solar Decathlon Pro, a program piloted in 2021 that brings Solar Decathlon resources to design professionals. The Solar Decathlon's effective approach to bringing real-world solutions to building science empowers future professionals to do impactful work.

buildings↗
DOE OSTI2020

OES-Environmental 2020 State of the Science Report: Environmental Effects of Marine Renewable Energy Development Around the World. Report for Ocean Energy Systems (OES)

This report summarizes the state of the science related to marine renewable energy devices and their interactions with and effects on the marine environment, the animals that live there, and the habitats that support them. This report serves an update and a complement to the 2016 Annex IV report. https://tethys.pnnl.gov/publications/state-of-the-science-2020

03 NATURAL GAS↗
DOE OSTI2022

Engaging a Diverse Workforce in the Building Sciences Through the JUMP Into STEM Program: Impact Study; Preprint

Ensuring inclusivity in building science professions requires engaging people from underrepresented demographics; unfortunately, many races, ethnicities, and genders continue to be underrepresented. The JUMP into STEM program works to rectify this, encouraging creative ideation and highlighting the unique perspectives of a diverse array of students. The top students are awarded internships that provide opportunities to work in building science research with close supervision from mentors in the field. In the research presented here, we investigate the impact of participation in JUMP into STEM on students' careers, including the impact on students from diverse backgrounds. Furthermore, we research students' awareness of career opportunities in building science, students' perception of their ability to meaningfully contribute to this field, and the career building opportunities that JUMP into STEM provides for students. Through participant interviews and data analysis, we measure program diversity, inclusion, and effectiveness at achieving goals. We find that among the hundreds of students who have participated in this program, more than 25 different majors and/or educational degree programs are represented and more than 45% of students attend minority serving institutions or historically black colleges and universities. The JUMP into STEM experience had a significant effect on career choices or career development for more than 80% of participants. Our results also indicate that the JUMP into STEM program is effective at promoting diversity in the building sciences and is successfully contributing to the larger effort within the building science industry to promote and ensure equity in technological progress and innovation.

building energy science↗
DOE OSTI2022

Effects of bridging fibers on the evolution of lamellar architecture during H 2 /H 2 O redox cycling of Fe-foams

Fe/Fe 3 O 4 redox cycling via cyclic H 2 /H 2 O exposure at 800 °C is studied in lamellar Fe foams with 15 vol% fibers, created by freeze-casting. Fibers were integrated in the foams to mitigate densification during cycling by mechanically supporting neighboring lamellae, thus preventing buckling and sintering at contact points. Three fiber types are examined: short (0.1 mm) and long (1–2 mm) stainless-steel fibers, and long zirconia fibers. Long fibers bridge lamellae and have a marked effect on the architecture by increasing the initial interlamellar porosity (from < 60 to > 85%), with a corresponding decrease in foam shrinkage during initial reduction and sintering (from > 80 to < 55% volumetric loss). Though performance improves as compared to fiber-free foams, fiber effectiveness against damage decreases with cycling: after 10 redox cycles, porosity falls from 85 to 50% for foams with long fibers. One novel degradation mechanism is identified: fiber engulfment. This mechanism occurs over successive redox cycles, as material from the lamellae cyclically engulfs (as Fe 3 O 4 ) and withdraws (as Fe) from the fibers, with a net transport from lamellae to fibers after each cycle. Finally, this cyclic coarsening mechanism alters foam architecture from bridged-lamellar (with evenly distributed porosity) to mixed lamellar/fibrous (with unevenly distributed porosity).

36 MATERIALS SCIENCE↗
DOE OSTI2023

On the convergence of statistics in simulations of stationary incompressible turbulent flows

When reporting statistics from simulations of statistically stationary chaotic phenomenon, it is important to verify that the simulations are time-converged. This condition is connected with the statistical error or number of digits with which statistics can be reliably reported. In this work we consider numerical experiments of low Reynolds number incompressible homogeneous and isotropic turbulence as a model problem to investigate statistical convergence over finite simulation times. Specifically, we investigate the time integration requirements that allow meaningful reporting of the statistical error associated with finiteness of the temporal domain. We address two key questions: (1) How long should a simulation be performed in terms of large eddy time, and (2) How should the simulation time be divided among temporal windows over which a quantity of interest is estimated so that its statistical error could be reliably reported? We find that reliable reporting of statistical errors requires simulations on the order of 10 4 large eddy times, which is orders of magnitude longer than typically performed. Additionally, data post-processing should employ windows of at least ten times the large eddy time scale, with the most robust computation of statistical error of the mean requiring window sizes of an additional factor of ten. For practical simulations, we demonstrate that it is possible to estimate the statistical error within a factor of two under a less stringent condition in which a minimum of four windows with size at least ten large eddy times are used. In conclusion, our observations for homogeneous isotropic turbulence are also shown to hold in turbulent channel flow.

42 ENGINEERING↗
DOE OSTI2021

Cybersecurity Considerations for Grid-Connected Batteries with Hardware Demonstrations

The share of renewable and distributed energy resources (DERs), like wind turbines, solar photovoltaics and grid-connected batteries, interconnected to the electric grid is rapidly increasing due to reduced costs, rising efficiency, and regulatory requirements aimed at incentivizing a lower-carbon electricity system. These distributed energy resources differ from traditional generation in many ways including the use of many smaller devices connected primarily (but not exclusively) to the distribution network, rather than few larger devices connected to the transmission network. DERs being installed today often include modern communication hardware like cellular modems and WiFi connectivity and, in addition, the inverters used to connect these resources to the grid are gaining increasingly complex capabilities, like providing voltage and frequency support or supporting microgrids. To perform these new functions safely, communications to the device and more complex controls are required. The distributed nature of DER devices combined with their network connectivity and complex controls interfaces present a larger potential attack surface for adversaries looking to create instability in power systems. To address this area of concern, the steps of a cyberattack on DERs have been studied, including the security of industrial protocols, the misuse of the DER interface, and the physical impacts. These different steps have not previously been tied together in practice and not specifically studied for grid-connected storage devices. In this work, we focus on grid-connected batteries. We explore the potential impacts of a cyberattack on a battery to power system stability, to the battery hardware, and on economics for various stakeholders. We then use real hardware to demonstrate end-to-end attack paths exist when security features are disabled or misconfigured. Our experimental focus is on control interface security and protocol security, with the initial assumption that an adversary has gained access to the network to which the device is connected. We provide real examples of the effectiveness of certain defenses. This work can be used to help utilities and other grid-connected battery owners and operators evaluate the severity of different threats and the effectiveness of defense strategies so they can effectively deploy and protect grid-connected storage devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Accomplishments and Year-End Performance Report: Wind Energy Program, Fiscal Year 2020

Offering broad-based technical expertise and world-class capabilities and facilities, NREL leverages these assets to provide the wind industry with a better understanding of fundamental physics, high-performance computing-enabled simulation tools, and the physical validation necessary to significantly lower the cost of wind energy. This report provides an overview of the many achievements NREL delivered on behalf of DOE's Wind Energy Technologies Office (WETO) and other partners during Fiscal Year (FY) 2020.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2024

Estimation of Surface Sensible Heat Flux due to Precipitation over CONUS and Its Impact on Urban Extreme Precipitation Modeling

The surface sensible heat flux induced by precipitation (Q P ) is a consequence of the temperature difference between the surface and the rain droplets. Despite its seemingly negligible nature, Q P is frequently omitted from both meteorological and climatological models. Nevertheless, it is important to acknowledge the numerous occasions in which the instantaneous values of Q P can be significant, particularly during extreme precipitation events. This study undertakes a comprehensive assessment of Q P across the contiguous United States (CONUS) utilizing high-resolution reanalysis, observational data, and numerical modeling to examine the influence of Q P on precipitation and the surface energy budget. The findings indicate that the spatial distribution of Q P climatology is analogous to that of precipitation, with magnitudes ranging from 2 to 3 W m -2 predominantly over the Midwest and Southeast regions. A seasonal analysis of QP reveals that the highest values occurring during the June–August (JJA) period, averaging 3.18 W m -2 . Peak Q P values of approximately 4 W m -2 are observed during JJA over the Great Plains region. We hypothesize that the Q P during an extreme precipitation event would be nonnegligible and have a significant impact on the local weather. To test this conjecture, we perform high-resolution simulations with and without Q P during an extreme precipitation event over the Chicago Metropolitan Area (CMA). The results show that the Q P may be a dominant factor compared to other components of surface heat flux during the zenith of precipitation hours. Also, Q P has the potential to not only diminish precipitation but also alter and reconfigure the remaining surface energy budget components.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Laboratory Directed Research and Development Program (FY 2019 Annual Summary of Completed Projects)

Oak Ridge National Laboratory (ORNL) is the US Department of Energy’s (DOE’s) largest multiprogram science, technology, and energy laboratory with distinctive capabilities in neutron science, computing, advanced materials, and nuclear science and technology. Using these capabilities, ORNL conducts basic and applied research and development (R&D) to support DOE’s overarching mission to “ensure America’s security and prosperity by addressing its energy, environmental and nuclear challenges through transformative science and technology solutions.” As a national resource, ORNL also applies its capabilities and skills to specific needs of other federal agencies and customers through the DOE Strategic Partnership Projects (SPP) program. Information about the laboratory and its programs is available at the ORNL website. The Laboratory Directed Research and Development (LDRD) program at ORNL operates under the authority of the DOE Order 413.2C, “Laboratory Directed Research and Development,” which establishes DOE’s requirements for the program while providing the laboratory director broad flexibility for program implementation. The LDRD program funds are obtained through a charge to all laboratory programs. ORNL reports on the program status to DOE each year.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Sunsetting coal power in China

Reducing CO 2 emissions from coal-fired electricity generation in China is critical to limit global warming. Long-term projections of China's electricity supply tend to assume that coal generation will be a mainstay of China's electricity system through 2050, due to limitations in the scalability of hydropower, nuclear, and natural gas generation and the commercial availability of carbon capture and storage. This paper examines the resource, economic, and institutional implications of reducing and replacing coal generation in China with mostly renewable energy and energy storage by 2040. We find that the scale of solar, wind, and storage resources needed to do so is on the order of 100–150 GW/year of solar and wind capacity and 15 GW/year of energy storage from 2020 to 2025, growing to 250 GW/year and 90 GW/year, respectively, from 2025 to 2040. We then also evaluate the sensitivities if coal plants are retired by 2050.

01 COAL, LIGNITE, AND PEAT↗