Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Two color multichannel heterodyne interferometer set up for high spatial resolution electron density profile measurements in TJ-II

A high spatial resolution two color [CO{sub 2}, {lambda}=10.6 {mu}m/Nd:YAG (Nd:YAG denotes neodymium-doped yttrium aluminum garnet), and {lambda}=1.064 {mu}m] expanded-beam multichannel heterodyne interferometer has been installed on the TJ-II stellarator. Careful design of the optical system has allowed complete control on the evolution of both Gaussian beams along the interferometer, as well as the evaluation and optimization of the spatial resolution to be expected in the measurements. Five CO{sub 2} (measurement) channels and three Nd:YAG (vibration compensation) channels have been used to illuminate the plasma with a probe beam of 100 mm size. An optimum interpolation method has been applied to recover both interferometric phasefronts prior to mechanical vibration subtraction. The first results of the installed diagnostic are presented in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-shot electron bunch length measurements using a spatial electro-optical autocorrelation interferometer

A spatial, electro-optical autocorrelation (EOA) interferometer using the vertically polarized lobes of coherent transition radiation (CTR) has been developed as a single-shot electron bunch length monitor at an optical beam port downstream the 100 MeV preinjector LINAC of the Swiss Light Source. This EOA monitor combines the advantages of step-scan interferometers (high temporal resolution) [D. Mihalcea et al., Phys. Rev. ST Accel. Beams 9, 082801 (2006) and T. Takahashi and K. Takami, Infrared Phys. Technol. 51, 363 (2008)] and terahertz-gating technologies [U. Schmidhammer et al., Appl. Phys. B: Lasers Opt. 94, 95 (2009) and B. Steffen et al., Phys. Rev. ST Accel. Beams 12, 032802 (2009)] (fast response), providing the possibility to tune the accelerator with an online bunch length diagnostics. While a proof of principle of the spatial interferometer was achieved by step-scan measurements with far-infrared detectors, the single-shot capability of the monitor has been demonstrated by electro-optical correlation of the spatial CTR interference pattern with fairly long (500 ps) neodymium-doped yttrium aluminum garnet (Nd:YAG) laser pulses in a ZnTe crystal. In single-shot operation, variations of the bunch length between 1.5 and 4 ps due to different phase settings of the LINAC bunching cavities have been measured with subpicosecond time resolution.

36 MATERIALS SCIENCE↗

Improvements of data quality of the LHD Thomson scattering diagnostics in high-temperature plasma experiments

In Large Helical Device (LHD) experiments, an electron temperature (T{sub e}) more than 15 keV has been observed by the yttrium-aluminum-garnet (YAG) laser Thomson scattering diagnostic. Since the LHD Thomson scattering system has been optimized for the temperature region, 50 eV{<=}T{sub e}{<=}10 keV, the data quality becomes worse in the higher T{sub e} region exceeding 10 keV. In order to accurately determine T{sub e} in the LHD high-T{sub e} experiments, we tried to increase the laser pulse energy by simultaneously firing three lasers. The technique enables us to decrease the uncertainties in the measured T{sub e}. Another signal accumulation method was also tested. In addition, we estimated the influence of high-energy electrons on T{sub e} obtained by the LHD Thomson scattering system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of high field SQUID magnetometer for magnetization studies up to 7 T and temperatures in the range from 4.2 to 300 K

We present the design, fabrication, integration, testing, and calibration of a high field superconducting quantum interference device (SQUID) magnetometer. The system is based on dc SQUID sensor with flux locked loop readout electronics. The design is modular and all the subsystems have been fabricated in the form of separate modules in order to simplify the assembly and for ease of maintenance. A novel feature of the system is that the current induced in the pickup loop is distributed as inputs to two different SQUID sensors with different strengths of coupling in order to improve the dynamic range of the system. The SQUID magnetometer has been calibrated with yttrium iron garnet (YIG) sphere as a standard reference material. The calibration factor was determined by fitting the measured flux profile of the YIG sphere to that expected for a point dipole. Gd{sub 2}O{sub 3} was also used as another reference material for the calibration and the effective magnetic moment of the Gd{sup 3+} could be evaluated from the temperature dependent magnetization measurements. The sensitivity of the system has been estimated to be about 10{sup -7} emu at low magnetic fields and about 10{sup -5} emu at high magnetic fields {approx}7 T.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Focused ion beam and electron microscopy characterization of nanosharp tips and microbumps on silicon and metal thin films formed via localized single-pulse laser irradiation

Cross-sections of laser fabricated nanosharp tips and microbumps on silicon and metal thin films are produced and examined in this work. These structures are formed with a Q-switched neodymium doped yttrium aluminum garnet nanosecond-pulse laser, emitting at its fourth harmonic of 266 nm, using a mask projection technique to generate circular laser spots, several microns in diameter. Cross-section of selected structures were produced using a focused ion beam and were characterized via electron microscopy. The diffraction patterns of the silicon samples indicate that the laser formed tip maintains the same single crystal structure as the original silicon film. Examinations of the laser formed structures in metal films confirm that the microbumps are hollow, while revealing that the vertical protrusions are solid.

36 MATERIALS SCIENCE↗

An explanation for laser-induced spallation effect in a-C:H films: Altered phase evolution route caused by hydrogen doping

The laser-induced spalling effect has been recognized as a unique phenomenon for amorphous carbon (a-C) films during laser processing. In this work, the origin of spalling effect was investigated by ablating two different types of a-C film: hydrogenated a-C (a-C:H) and nonhydrogenated a-C with an Nd-yttrium aluminum garnet laser system. Comparisons of ablating results demonstrated that the spalling effect only occurred in a-C:H rather than nonhydrogenated a-C. Laser heating simulation indicated that the temperature distributions in both films after laser pulse are similar with a high temperature gradient in depth direction. Annealing test results, Raman spectra and nanoindentation show that with the increase in annealing temperature, a-C film transforms into grassy carbon directly, while a-C:H experiences two subprocess under heating: the hydrogen mobilization and rearrangement of C-C network at a relatively low temperature range resulting in a denser C-C network and raised film density; the graphitization at high temperature which would lower the film density. We propose that the reason of laser-induced spalling effect in a-C:H might depend on two aspects: (1) the heat source like laser pulse which could produce a high temperature gradient in depth direction within ultrashort time and (2) the unique evolution process of film microstructure under heating. Based on above model, the spalling effect is ascribed to the concentrated stress caused by different structure evolution subprocess at different depth in a-C:H during the laser irradiation. It is remarkable that the conclusions deduced from our model are proven to be in good agreement with our experimental results and the previous articles reported by others.

36 MATERIALS SCIENCE↗

The effect of excitation wavelength on dynamics of laser-produced tin plasma

We investigated the effect of the excitation wavelength on the density evolution of laser-produced tin plasmas, both experimentally and numerically. For producing plasmas, Sn targets were excited with either 10.6 {mu}m CO{sub 2} laser or 1.06 {mu}m Nd:yttrium aluminum garnet laser; both are considered to be potential excitation lasers for extreme ultraviolet lithography laser-produced plasma light sources. The electron density of the plasma during the isothermal expansion regime was estimated using an interferometric technique. The Stark broadening of isolated singly-ionized emission was employed for deducing the density during the plasma adiabatic expansion regime. Our results indicate that the excitation source wavelength determines the initial density of the plasma, as well the plume expansion dynamics. Numerical simulation using HEIGHTS simulation package agrees well with the experimentally measured density profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ruby and Sm:YAG fluorescence pressure gauges up to 120 GPa and 700 K

Diamond anvil cell (DAC) technique relies on pressure determination based on use of pressure gauges. Fluorescence-based gauges, such as ruby and Sm doped yttrium aluminum garnet (Sm:YAG), are frequently used in the high pressure research. Here we present the results of DAC experiments which allowed extending calibration curves of the fluorescence frequency versus pressure up to 120 GPa at high temperatures up to 700 K for both for ruby and Sm:YAG. Cubic boron nitride was used as the reference gauge.

36 MATERIALS SCIENCE↗

Unidirectional anisotropy in the spin pumping voltage in yttrium iron garnet/platinum bilayers

Detailed measurements of the dc voltage generated in a thin Pt layer deposited on films of yttrium iron garnet (YIG) have been carried out to study the spin pumping effect produced by magnetostatic (MS) modes excited by a microwave field. In relatively thick YIG films the modes are far apart so that one can identify clearly the spin pumping voltage in V{sub SP} produced by each MS mode. We have discovered that when the sputter deposition of the thin Pt layer is made on the YIG film magnetized by a static magnetic field, V{sub SP} exhibits a strong unidirectional anisotropy.

36 MATERIALS SCIENCE↗

Enhanced spin pumping at yttrium iron garnet/Au interfaces

Spin injection across the ferrimagnetic insulator yttrium iron garnet (YIG)/normal metal Au interface was studied using ferromagnetic resonance. The spin mixing conductance was determined by comparing the Gilbert damping parameter {alpha} in YIG/Au and YIG/Au/Fe heterostructures. The main purpose of this study was to correlate the spin pumping efficiency with chemical modifications of the YIG film surface using in situ etching and deposition techniques. By means of Ar{sup +} ion beam etching, one is able to increase the spin mixing conductance at the YIG/Au interface by a factor of 5 compared to the untreated YIG/Au interface.

36 MATERIALS SCIENCE↗

Effect of oxygen pressure on structural and magnetic properties of YIG thin films

The effect of oxygen pressure (P{sub O2}) on the Yttrium Iron Garnet (YIG) thin films were grown on silicon substrate by rf sputtering method was studied. The as-deposited films at 300K were amorphous in nature. The crystallization of these films was achieved by annealing at a temperature of 800 deg. C/1hr in air. The structural, microstructural and magnetic properties were found to be dependent on P{sub O2}.

36 MATERIALS SCIENCE↗

Visible photoluminescence in polycrystalline terbium doped aluminum nitride (Tb:AlN) ceramics with high thermal conductivity

Thermal management continues to be one of the major challenges in the development of high powered light sources such as solid state lasers. In particular, the relatively low thermal conductivity of standard photoluminescent (PL) materials limits the overall power output and/or duty cycle. We present a method based on current activated pressure assisted densification for the fabrication of high thermal conductivity PL materials: rare earth doped polycrystalline bulk aluminum nitride. Specifically, the ceramics are translucent and are doped with Tb{sup 3+}, allowing for emission in the visible. Remarkably, the ceramics have a room temperature thermal conductivity of 94 W/(m K) which is almost seven times higher than that of the state of the art host material, Nd-doped yttrium aluminum garnet. These light emitting properties coupled with very high thermal conductivity should enable the development of a wide variety of more powerful light sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic nanoparticles formed in glasses co-doped with iron and larger radius elements

A new type of nanoparticle-containing glasses based on borate glasses co-doped with low contents of iron and larger radius elements, Dy, Tb, Gd, Ho, Er, Y, and Bi, is studied. Heat treatment of these glasses results in formation of magnetic nanoparticles, radically changing their physical properties. Transmission electron microscopy and synchrotron radiation-based techniques: x-ray diffraction, extended x-ray absorption fine structure, x-ray absorption near-edge structure, and small-angle x-ray scattering, show a broad distribution of nanoparticle sizes with characteristics depending on the treatment regime; a crystalline structure of these nanoparticles is detected in heat treated samples. Magnetic circular dichroism (MCD) studies of samples subjected to heat treatment as well as of maghemite, magnetite, and iron garnet allow to unambiguously assign the nanoparticle structure to maghemite, independently of co-dopant nature and of heat treatment regime used. Different features observed in the MCD spectra are related to different electron transitions in Fe{sup 3+} ions gathered in the nanoparticles. The static magnetization in heat treated samples has non-linear dependence on the magnetizing field with hysteresis. Zero-field cooled magnetization curves show that at higher temperatures the nanoparticles occur in superparamagnetic state with blocking temperatures above 100 K. Below ca. 20 K, a considerable contribution to both zero field-cooled and field-cooled magnetizations occurs from diluted paramagnetic ions. Variable-temperature electron magnetic resonance (EMR) studies unambiguously show that in as-prepared glasses paramagnetic ions are in diluted state and confirm the formation of magnetic nanoparticles already at earlier stages of heat treatment. Computer simulations of the EMR spectra corroborate the broad distribution of nanoparticle sizes found by 'direct' techniques as well as superparamagnetic nanoparticle behaviour demonstrated in the magnetization studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray luminescence based spectrometer for investigation of scintillation properties

A new x-ray luminescence based spectrometer was developed and installed to examine the scintillation properties of materials while revealing the origins of luminescence and investigating trapping defects. Measurements were performed on a number of undoped and Ce doped yttrium aluminum garnet crystals and various luminescence centers were characterized. The measured x-ray luminescence spectra provide information about the spectral range and the scintillation efficiency and linearity. The efficiency of charge-carriers production due to x ray, their energy transfer to the luminescence centers, and the efficiency of luminescence are all reflected in the efficiency of x-ray luminescence.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spin precession modulation in a magnetic bilayer

We report on modulation of the spin precession in a Co/garnet bilayer by femtosecond laser excitation using time-resolved magneto-optical tools. Damped oscillations in the Faraday rotation transients representing precessional motion of the magnetization vector are observed in both the 2 nm Co layer and 1.8 {mu}m garnet of the bilayer with distinct frequencies differing by about a factor of two. The excitation efficiency of these precessions strongly depends on the out-of-plane magnetic field. The modulation effect with the coupling in a magnetic bilayer can be useful for non-thermally controlling the magnetization of nanomagnets and ultrafast switching in magnetic nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of de-watering from the gelatinous precipitate formed during co-precipitation of Nd-YAG powder

Neodymium doped Yttrium Aluminium Garnet (Nd:YAG) ceramics have been synthesised using coprecipitation technique and high temperature vacuum sintering. Gelatinous like precipitates were obtained when precursors of Nd, Al and Yb-nitrate solutions are co-precipitated using ammonia co-precipitant. De-watering from the gelatinous like precipitates is a big challenge and it possesses difficulty in filtration. Evaporation of water by heating resulted in strong agglomerated powder. Different agents were used to ease the filtration process, which is correlated with the phase in the calcined powder.

36 MATERIALS SCIENCE↗

Confinement of magnetostatic forward volume waves in two-dimensional magnonic crystals with line defects

The mode patterns of magnetostatic forward volume waves (MSFVWs) propagating in two-dimensional magnonic crystals with line defects via periodic variation in thickness of square lattice in a yttrium iron garnet thin film are reported. The theoretical approach based on Walker's equation was employed to analyze the confinement of MSFVWs in the line defects. A good agreement between the theoretical predictions and the experimental results was obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of magnetic proximity effect in Ta/YIG bilayer Hall bar structure

In this work, the investigation of magnetic proximity effect was extended to Ta which has been reported to have a negative spin Hall angle. Magnetoresistance (MR) and Hall measurements for in-plane and out-of-plane applied magnetic field sweeps were carried out at room temperature. The size of the MR ratio observed (∼10{sup −5}) and its magnetization direction dependence are similar to that reported in Pt/yttrium iron garnet, both of which can be explained by the spin Hall magnetoresistance theory. Additionally, a flip of magnetoresistance polarity is observed at 4 K in the temperature dependent measurements, which can be explained by the magnetic proximity effect induced anisotropic magnetoresistance at low temperature. Our findings suggest that both magnetic proximity effect and spin Hall magnetoresistance have contribution to the recently observed unconventional magnetoresistance effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗