Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Effect of layer thickness on structural, morphological and superconducting properties of Nb 3 Sn films fabricated by multilayer sequential sputtering

Superconducting Nb3Sn films can be synthesized by controlling atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn films where Sn composition of deposited films can be controlled by controlling the thickness of alternating Nb and Sn layers. We report on the structural, morphological and superconducting properties of Nb3Sn films fabricated by multilayer sequential sputtering of Nb and Sn films on sapphire substrates with ex-situ annealing at 950 °C for 3 h. We have investigated the effect of Nb and Sn layer thickness on the properties of Nb3Sn films. The thicknesses of Nb and Sn layers were varied in two ways: (1) varied Nb:Sn thickness ratio (1:1, 2:1, 3:1, 4:1), and (2) varied layer thickness of both Nb and Sn layers, while keeping constant Nb:Sn thickness ratio of 2:1. The crystal structure, surface morphology, topography, and film composition were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X-ray spectroscopy (EDS) respectively. The results showed Sn loss from the surface due to evaporation during annealing. Superconducting Nb3Sn films of critical temperature up to 17.93 K have been achieved.

Sayeed, M. N.↗

Temperature evolution of the phonon dynamics in the Kitaev spin liquid

In this work, we present a study of the phonon dynamics in the honeycomb Kitaev spin model at finite temperatures. We show that the fractionalized spin excitations of the Kitaev spin liquid, the itinerant Majorana fermions, and static Z 2 fluxes have distinct effects on the phonon dynamics, which makes the phonon dynamics a promising tool for exploring the Kitaev spin liquid candidate materials. In particular, we focus on the signature of the fractionalized excitations in the thermodynamic behavior of the sound attenuation and the phonon Hall viscosity: the former describes the phonon decay into the fractionalized excitations, and the latter is the leading order time-reversal symmetry breaking effect on the acoustic phonon. We find that the angular dependence of the attenuation coefficient and its magnitude is modified by the thermal excitation of the Z 2 fluxes. The strength of this effect strongly depends on the relative magnitude of the sound velocity and the Fermi velocity characterizing the low-energy Majorana fermions. We also show that the Hall viscosity is strongly suppressed by the increase of the density of the Z 2 fluxes at finite temperatures. All these observations reflect the effects of the emergent disorder on the Majorana fermions introduced by the Z 2 fluxes. Our analysis is based on the complementary analytical calculations in the low-temperature zero-flux sector, and numerical calculations in the inhomogeneous flux sectors at intermediate and high temperatures with stratified Monte Carlo (strMC) method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-Threshold Field Electron Emission from Two-Dimensional Carbon Structures

Particles of multilayer graphene obtained by the method of self-propagating high-temperature synthesis are proposed as an active cathode component for field electron emission. It is shown that this material makes it possible to implement a new technology for creating efficient field emitters with a developed surface. It has been established that the effect of low-threshold field electron emission is observed in this material. In pulsed electric fields, the possibility of obtaining high-current electron beams with currents up to hundreds of amperes has been confirmed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep Learning-based Non-Stationary Bias Correction (NSBC)

This work develops the NSBC (non-stationary bias correction) methodology to correct temperature projection bias from E3SM. The NSBC deep learning framework consists of a three-part architecture: an auto-encoder for compressing the spatial information, an LSTM for predicting annual temperature mean, and a U-Net for capturing the residual bias in temperature. The non-stationary bias correction (NSBC) framework can correct the non-stationarity of the biases of the climate models, which significantly improves the accuracy of future temperature prediction and improves the overestimation of extreme high temperatures that many existing bias correction methods suffer from. Getting started 1. Obtain the historical climate simulation and observation data. The E3SM simulation data are available through https://aims2.llnl.gov/search/cmip6/. The pseudo observations, the Geophysical Fluid Dynamics Laboratory (GFDL)-ESM4 model (Krasting et al., 2018) are available through https://aims2.llnl.gov/search/cmip6/. The spatial resolution of E3SM and pseudo observation datasets are both regridded to a common 1° resolution grid using conservative interpolation. The regridded E3SM and pseudo observation with 1° resolution can be found throught ./data/. 2. Train the Auto-encoder model. Python 0-autoencoder.py 3. Train the LSTM Python 1-LSTM.py 4. Generate the annual mean temperature based on trained LSTM Python 2-generate_annual_mean_LSTM.py 5. Train the U-Net. Python 3-unet.py 6. Evaluation and compared with the baseline Python 4_evaluation.py Is there a deadline approaching that requires the release of yo

Lucas, Donald↗

Leak Detection and H2 Sensor Development for Hydrogen Applications

The objectives of this report are: (1) Develop a low cost, low power, durable, and reliable hydrogen safety sensor for a wide range of vehicle and infrastructure applications; (2) Continually advance test prototypes guided by materials selection, sensor design, electrochemical R&D investigation, fabrication, and rigorous life testing; (3) Disseminate packaged sensor prototypes and control systems to DOE Laboratories and commercial parties interested in testing and fielding advanced prototypes for cross-validation; (4) Evaluate manufacturing approaches for commercialization; and (5) Engage an industrial partner and execute technology transfer. Recent developments in the search for sustainable and renewable energy coupled with the advancements in fuel cell powered vehicles (FCVs) have augmented the demand for hydrogen safety sensors. There are several sensor technologies that have been developed to detect hydrogen, including deployed systems to detect leaks in manned space systems and hydrogen safety sensors for laboratory and industrial usage. Among the several sensing methods electrochemical devices that utilize high temperature-based ceramic electrolytes are largely unaffected by changes in humidity and are more resilient to electrode or electrolyte poisoning. The desired sensing technique should meet a detection threshold of 1% (10,000 ppm) H 2 and response time of {approx_equal}1 min, which is a target for infrastructure and vehicular uses. Further, a review of electrochemical hydrogen sensors by Korotcenkov et.al and the report by Glass et.al suggest the need for inexpensive, low power, and compact sensors with long-term stability, minimal cross-sensitivity, and fast response. This view has been largely validated and supported by the fuel cell and hydrogen infrastructure industries by the NREL/DOE Hydrogen Sensor Workshop held on June 8, 2011. Many of the issues preventing widespread adoption of best-available hydrogen sensing technologies available today outside of cost, derive from excessive false positives and false negatives arising from signal drift and unstable sensor baseline; both of these problems necessitate the need for unacceptable frequent calibration.

08 HYDROGEN↗

REBCO coated conductor cables for fusion magnets - Final Report

The feasibility for fusion as a practical energy source needs to be enhanced significantly by removing some of the restrictions that low -- temperature superconductors (LTS) put on the fusion magnet systems. One method to simplify the magnet system is by using high -- temperature superconductors (HTS) that allow for much larger temperature margins, a higher magnet performance and much less mechanical degradation in the superconductor during operation. For use in fusion magnets, HTS need to be bundled into high -- current cables that can be operated at high magnetic fields and at high current ramp rates, while experiencing a homogenous current distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Leak Detection and H2 Sensor Development for Hydrogen Applications

Recent developments in the search for sustainable and renewable energy coupled with the advancements in fuel cell powered vehicles (FCVs) have augmented the demand for hydrogen safety sensors. There are several sensor technologies that have been developed to detect hydrogen, including deployed systems to detect leaks in manned space systems and hydrogen safety sensors for laboratory and industrial usage. Among the several sensing methods electrochemical devices that utilize high temperature-based ceramic electrolytes are largely unaffected by changes in humidity and are more resilient to electrode or electrolyte poisoning. The desired sensing technique should meet a detection threshold of 1% (10,000 ppm) H 2 and response time of ≤1 min, which is a target for infrastructure and vehicular uses. Further, a review of electrochemical hydrogen sensors by Korotcenkov et.al and the report by Glass et.al suggest the need for inexpensive, low power, and compact sensors with long-term stability, minimal cross-sensitivity, and fast response. This view has been largely validated and supported by the fuel cell and hydrogen infrastructure industries by the NREL/DOE Hydrogen Sensor Workshop held on June 8, 2011. Many of the issues preventing widespread adoption of best-available hydrogen sensing technologies available today outside of cost, derive from excessive false positives and false negatives arising from signal drift and unstable sensor baseline; both of these problems necessitate the need for unacceptable frequent calibration.

08 HYDROGEN↗

A Synthetic Strategy to Prepare New Complex Uranium- and Thorium-Containing Oxides: Predictive Solid State Synthesis of New Composition using Radius Ratio Rules and Materials Discovery based on Crystal Growth from High Temperature Solutions

Flux crystal growth and mild hydrothermal crystal growth methods were used to obtain new uranium containing phases in single crystal form and permitted the structural characterization of these new compositions as well as the investigation of their magnetic and optical properties. The report describes the approaches used to obtain crystals of several classes of materials including oxides and oxyhalides, silicates, phosphates, and fluorides. The strategies for obtaining these diverse materials and the specific fluxes used are described and discussed.

36 MATERIALS SCIENCE↗

Evaporation Sub-model Development for Volume of Fluid (eVOF) Method Applicable to Spray-Wall Interaction Including Film Characteristics with Validation at High Pressure and Temperature Conditions (Final Report)

Internal combustion engines have seen a great evolution over the last several decades through application of high pressure direct injection, multiple injections, and other technologies to reduced fuel consumption, NOx, and PM. Although combustion systems with advanced injection strategies have been studied extensively, there exists a significant fundamental knowledge gap on the fuel-spray interactions with the piston surface and chamber walls. Advanced computational codes validated with experimental techniques have to be developed for accurate representation of the drop impingement, fuel film formation, and vaporization. Current engine CFD spray models utilize a Lagrangian framework for modeling which lacks critical considerations of the physics pertaining to these interactions and thus requiring extensive parameterization, tuning and validation. The team from Michigan Technological University, University of Massachusetts Dartmouth, and Argonne National Laboratory is composed of experts in sprays, combustion, engines and CFD with a wide spectrum of knowledge including specific expertise in the area under consideration. In the proposed work, a VOF modeling approach has been adopted for the spray-wall interaction, film formation and spreading, and vaporization. With the inclusion of a vaporization submodel, a more predictive and accurate simulation of the spray-film was performed without extensive need of parameterization and tuning. Extensive experimentation of the spray-wall interaction under the range of conditions matching the thermodynamic and surface temperatures that occur in diesel and gasoline engines were conducted to validate the SWI submodels and for development of the evaporation sub-model, which has been implemented in the Converge software.

42 ENGINEERING↗

Evaporation Submodel Development for Volume of Fluid (eVOF) Method Applicable to Spray-Wall Interaction Including Film Characteristics with Validation at High Pressure and Temperature Conditions

Internal combustion engines have seen a great evolution over the last several decades through application of high pressure direct injection, multiple injections, and other technologies to reduced fuel consumption, NOx, and PM. Although combustion systems with advanced injection strategies have been studied extensively, there exists a significant fundamental knowledge gap on the fuel-spray interactions with the piston surface and chamber walls. Advanced computational codes validated with experimental techniques have to be developed for accurate representation of the drop impingement, fuel film formation, and vaporization. Current engine CFD (Computational Fluid Dynamics) spray models utilize a Lagrangian framework for modeling which lacks critical considerations of the physics pertaining to these interactions and thus requiring extensive parameterization, tuning and validation. The team from Michigan Technological University, University of Massachusetts Dartmouth, and Argonne National Laboratory is composed of experts in sprays, combustion, engines and CFD with a wide spectrum of knowledge including specific expertise in the area under consideration. In the proposed work, a VOF (Volume of Fluid) modeling approach has been adopted for the spray-wall interaction, film formation and spreading, and vaporization. With the inclusion of a vaporization submodel, a more predictive and accurate simulation of the spray-film was performed without extensive need of parameterization and tuning. Extensive experimentation of the spray-wall interaction under the range of conditions matching the thermodynamic and surface temperatures that occur in diesel and gasoline engines were conducted to validate the SWI submodels and for development of the evaporation submodel, which has been implemented in the flow solver.

42 ENGINEERING↗

Ultra-High Temperature Thermal Barrier Coating Development and Validation

The most effective method to improve industrial gas turbine power is to increase firing temperature. To maintain component durability at these higher temperatures, thermal barrier coatings (TBC’s) are playing an increasing role in protecting turbine hardware. TBC’s have been successfully used on Solar Turbines’ combustor liners and turbine airfoils, but there is a need for TBC’s that can operate at higher temperatures. Based on recent, favorable rig testing experience, Solar recognized that yttrium aluminum garnet (YAG) TBC’s made by the Solution Precursor Plasma Spray Process (SPPS) has great potential for higher turbine temperatures. This testing verified the thermal cycle durability of the SPPS YAG TBC’s, as well as demonstrated that the temperature drop through the SPPS YAG TBC was twice that measured across a companion APS YSZ TBC. The SPPS YAG TBC with the potential for a 200°C improvement in temperature capability represents a materials breakthrough. The SPPS process also produces a number of unique microstructural features that confer superior properties. SPPC TBC’s have ultra-fine splats that increase toughness and erosion resistance, and the process can be tailored to produce through-thickness cracks for strain-tolerance and control porosity for lower thermal conductivity and increase coating abradability. This proposal would include further development of SPPS YAG density-graded coatings, optimization of the application process, and validation of higher temperature capability and durability through rig and engine testing of coated combustion liners and turbine outer air seals. The technology would be advanced from a TRL 3 to a proposed TRL 6 by overcoming processing concerns on efficiency, application distance and optimization of a graded coating without impacting coating durability by demonstrating the coating performance on components in rig and development gas turbine engine testing.

36 MATERIALS SCIENCE↗

Recent Progress in Electrochemical Upgrading of Bio-Oil Model Compounds and Bio-Oils to Renewable Fuels and Platform Chemicals

Sustainable production of renewable carbon-based fuels and chemicals remains a necessary but immense challenge in the fight against climate change. Bio-oil derived from lignocellulosic biomass requires energy-intense upgrading to produce usable fuels or chemicals. Traditional upgrading methods such as hydrodeoxygenation (HDO) require high temperatures (200–400 °C) and 200 bar of external hydrogen. Electrochemical hydrogenation (ECH), on the other hand, operates at low temperatures (<80 °C), ambient pressure, and does not require an external hydrogen source. These environmental and economically favorable conditions make ECH a promising alternative to conventional thermochemical upgrading processes. ECH combines renewable electricity with biomass conversion and harnesses intermediately generated electricity to produce drop-in biofuels. This review aims to summarize recent studies on bio-oil upgrading using ECH focusing on the development of novel catalytic materials and factors impacting ECH efficiency and products. Here, electrode design, reaction temperature, applied overpotential, and electrolytes are analyzed for their impacts on overall ECH performance. We find that through careful reaction optimization and electrode design, ECH reactions can be tailored to be efficient and selective for the production of renewable fuels and chemicals. Preliminary economic and environmental assessments have shown that ECH can be viable alternative to convention upgrading technologies with the potential to reduce CO2 emissions by 3 times compared to thermochemical upgrading. While the field of electrochemical upgrading of bio-oil has additional challenges before commercialization, this review finds ECH a promising avenue to produce renewable carbon-based drop-in biofuels. Finally, based on the analyses presented in this review, directions for future research areas and optimization are suggested.

09 BIOMASS FUELS↗

Development of an automated high-temperature valveless injection system for online gas chromatography

A reliable method of sample introduction is presented for online gas chromatography with a special application to in situ field portable atmospheric sampling instruments. A traditional multi-port valve is replaced with a valveless sample introduction interface that offers the advantage of long-term reliability and stable sample transfer efficiency. An engineering design model is presented and tested that allows customizing this pressure-switching-based device for other applications. Flow model accuracy is within measurement accuracy (1%) when parameters are tuned for an ambient-pressure detector and 15% accurate when applied to a vacuum-based detector. Laboratory comparisons made between the two methods of sample introduction using a thermal desorption aerosol gas chromatograph (TAG) show that the new interface has approximately 3 times greater reproducibility maintained over the equivalent of a week of continuous sampling. Field performance results for two versions of the valveless interface used in the in situ instrument demonstrate typically less than 2% week -1 response trending and a zero failure rate during field deployments ranging up to 4 weeks of continuous sampling. Extension of the valveless interface to dual collection cells is presented with less than 3% cell-to-cell carryover.

Kreisberg, N. M.↗

Structure and luminescence properties of Dy 2 O 3 doped bismuth-borate glasses

In this study heavy bismuth-borate glasses were studied as host matrices of Dy 2 O 3 rare earth, for potential application as scintillator materials in high energy physics experiments and in general radiation detection systems. Glass matrices were prepared from 20BaO-xBi 2 O 3 -(80-x)B 2 O 3 (x = 20, 30, 40 mol%) ternary systems and synthesized by the melt-quenching method at different temperatures in order to obtain high density and high transparency in the UV/Vis range. Particularly, the glass manifesting the higher transparency and with sufficiently high density was doped with Dy 2 O 3 (2.5 and 5 mol%) in order to induce the luminescence characteristics. The effects of Bi 2 O 3 and Dy 2 O 3 on density, thermal behaviour, transmission as well as luminescence properties under UV excitation, were investigated. The experimental results show that the synthesized glasses can be considered promising candidate materials as dense scintillators, due to the Dy 3 + centres emission.

36 MATERIALS SCIENCE↗

Evaluation of a 5kW Solid Oxide Electrolysis Cell Stack

Electrolysis is the process of combining water and energy to produce oxygen and hydrogen gas. A solid oxide electrolysis cell (SOEC) is a type of high-temperature electrochemical cell used to yield hydrogen from steam. Many of these cells are put together to form an SOEC stack which operates between 600°C and 1000°C. There are several electrochemical methods for producing hydrogen, but the benefit of high-temperature electrolysis (HTE) in SOECs is they exhibit very high electrical efficiency and the potential for harnessing excess heat from other industrial processes such as nuclear power generation, fertilizer production, and chemical production.

08 - HYDROGEN↗

Flat-On Secondary Crystals as Effective Blocks To Reduce Ionic Conduction Loss in Polysulfone/Poly(vinylidene fluoride) Multilayer Dielectric Films

Recently, poly(vinylidene fluoride) (PVDF)-based multilayer films have demonstrated good potential as high energy density, high temperature, and low loss polymer dielectrics for advanced electrical and power applications. However, impurity ion conduction in the PVDF layers can cause significant dielectric loss at high temperatures. In this study, we discovered a facile melt-recrystallization method to suppress ionic conduction loss in polysulfone (PSF)/PVDF 50/50 (v/v) 33-layer films. By use of combined differential scanning calorimetry, broadband dielectric spectroscopy, and simultaneous small-angle X-ray scattering/wide-angle X-ray diffraction techniques, the underlying mechanism for the suppression of ionic conduction was unraveled. Basically, the growth and hierarchical organization of primary and secondary PVDF crystals confined in 400 nm layers played an important role. When the cooling rate during melt-recrystallization was high (e.g., ≥ 500 °C/min), small and poorly oriented secondary crystals between orderly stacked edge-on primary crystals allowed free transport of impurity ions in PVDF layers. At low to moderate cooling rates (i.e., <100 °C/min), growth of flat-on secondary crystals between the edge-on primary crystalline lamellae blocked the transport of impurity ions, suppressing the dielectric loss from ionic conduction. On the basis of this paper, we propose a modified multilayer coextrusion method with controlled cooling rates to achieve flat-on secondary crystals for the reduction of high temperature dielectric loss in PVDF-based multilayer dielectric films.

36 MATERIALS SCIENCE↗