Search NASA⌕ Search

SEARCH · Search NASA

Results for “Imaging & optical processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

MISR Level 1B1 Local Mode Radiance Data (MIB1LM_V1)

The results of two types of processing are included in this product. First, the Radiance Scaling operation converts the camera's digital number output to a measure of energy incident on the front optical surface. The measurement is expressed in units called radiance (energy per unit area, wavelength, and solid angle) as defined by the International Standard (SI). Second, Radiance Conditioning modifies the radiances to remove instrument-dependent effects. Specifically, image sharpening is applied, and focal-plane scattering is removed. Additionally, all radiances are adjusted to remove slight spectral sensitivity differences among the 1504 detector elements of each spectral band and each camera. In addition to the Level 1B1 radiometric product for MISR's Global Mode imagery, there is a separate Level 1B1 product for each high-resolution Local Mode scene. The Radiometric Product contains spectral radiances for all MISR channels (four spectral bands and nine cameras). Each radiance value represents the incident radiance averaged over the sensor's total band response. Processing includes both radiance scaling and conditioning steps. Radiance scaling converts the Level 1A data from digital counts to radiances using coefficients derived in combination with the On-Board Calibrator (OBC) and vicarious calibrations. The OBC contains Spectralon calibration panels which are deployed monthly and reflect sunlight into the cameras. The OBC detector standards then measure this reflected light to provide the calibration. Vicarious field campaigns are conducted less frequently but provide an independent methodology useful for reducing systematic errors. Radiance conditioning removes undesirable instrument effects. Image enhancement is provided by deconvolving the scene with the sensor's point-spread-function. Additionally, in-band scaling adjusts the reported radiances to correspond to a nominal band response profile. This frees the Level 2 software from the need to correct for detector element non-uniformities. No out-of-band correction is done for this product, nor are the data geometrically corrected or resampled at this point. In summary, the Level 1B1 Product contains the Data Numbers (DNs) radiometrically-scaled to radiances with no geometric resampling. [Location=GLOBAL] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=275 m for red band only; Longitude_Resolution=275 m for red band only; Horizontal_Resolution_Range=250 km - < 500 km or approximately 2.5 degrees - < 5.0 degrees; Temporal_Resolution=about 15 orbits/day].

NEAR IR IMAGERY↗
NASA NTRSDate not supplied

MISR Level 1B1 Local Mode Radiance Data (MIB1LM_V2)

The results of two types of processing are included in this product. First, the Radiance Scaling operation converts the camera's digital number output to a measure of energy incident on the front optical surface. The measurement is expressed in units called radiance (energy per unit area, wavelength, and solid angle) as defined by the International Standard (SI). Second, Radiance Conditioning modifies the radiances to remove instrument-dependent effects. Specifically, image sharpening is applied, and focal-plane scattering is removed. Additionally, all radiances are adjusted to remove slight spectral sensitivity differences among the 1504 detector elements of each spectral band and each camera. In addition to the Level 1B1 radiometric product for MISR's Global Mode imagery, there is a separate Level 1B1 product for each high-resolution Local Mode scene. The Radiometric Product contains spectral radiances for all MISR channels (four spectral bands and nine cameras). Each radiance value represents the incident radiance averaged over the sensor's total band response. Processing includes both radiance scaling and conditioning steps. Radiance scaling converts the Level 1A data from digital counts to radiances using coefficients derived in combination with the On-Board Calibrator (OBC) and vicarious calibrations. The OBC contains Spectralon calibration panels which are deployed monthly and reflect sunlight into the cameras. The OBC detector standards then measure this reflected light to provide the calibration. Vicarious field campaigns are conducted less frequently but provide an independent methodology useful for reducing systematic errors. Radiance conditioning removes undesirable instrument effects. Image enhancement is provided by deconvolving the scene with the sensor's point-spread-function. Additionally, in-band scaling adjusts the reported radiances to correspond to a nominal band response profile. This frees the Level 2 software from the need to correct for detector element non-uniformities. No out-of-band correction is done for this product, nor are the data geometrically corrected or resampled at this point. In summary, the Level 1B1 Product contains the Data Numbers (DNs) radiometrically-scaled to radiances with no geometric resampling. [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=275 m for red band only; Longitude_Resolution=275 m for red band only; Temporal_Resolution=about 15 orbits/day].

AM-1↗
NASA NTRS1969

Fluorescent photography of spray droplets using a laser light source

Monochromatic laser emission transformed by a fluorescent process into droplet emission over a wavelength band provides high light intensities for obtaining adequate time resolution to stop droplet motion in photographic spray studies. Experiments showed that the Q-switched laser-optical harmonic generator combination produced sharp, well-exposed droplet images.

Groeneweg, J.↗
NASA NTRS1992

The Airborne Ocean Color Imager - System description and image processing

The Airborne Ocean Color Imager was developed as an aircraft instrument to simulate the spectral and radiometric characteristics of the next generation of satellite ocean color instrumentation. Data processing programs have been developed as extensions of the Coastal Zone Color Scanner algorithms for atmospheric correction and bio-optical output products. The latter include several bio-optical algorithms for estimating phytoplankton pigment concentration, as well as one for the diffuse attenuation coefficient of the water. Additional programs have been developed to geolocate these products and remap them into a georeferenced data base, using data from the aircraft's inertial navigation system. Examples illustrate the sequential data products generated by the processing system, using data from flightlines near the mouth of the Mississippi River: from raw data to atmospherically corrected data, to bio-optical data, to geolocated data, and, finally, to georeferenced data.

Wrigley, Robert C.↗
NASA NTRS1996

High-Latitude Ionospheric Dynamics During Conditions of Northward IMF

In order to better understand the physical processes operating during conditions of northward interplanetary magnetic field (IMF), in situ measurements from the Dynamics Explorer-2 (low altitude) polar satellite and simultaneous observations from the auroral imager on the Dynamics Explorer-1 (high altitude) satellite were used to investigate the relationships between optical emissions, particle precipitation, and convective flows in the high-latitude ionosphere. Field aligned current and convective flow patterns during IMF north include polar cap arcs, the theta aurora or transpolar arc, and the 'horse-collar' aurora. The initial part of the study concentrated on the electrodynamics of auroral features in the horse-collar aurora, a contracted but thickened emission region in which the dawn and dusk portions can spread to very high latitudes, while the latter part focused on the evolution of one type of IMF north auroral pattern to another, specifically the quiet-time horse-collar pattern to a theta aurora.

Sharber, J. R.↗
NASA NTRS2004

Image Formation in High Contrast Optical Systems: The Role of Polarization

To find evidence of life in the Universe outside our solar system is one of the most compelling and visionary adventures of the 21st century. The technologies to create the telescopes and instruments that will enable this discovery are now within the grasp of mankind. Direct imaging of a very faint planet around a neighboring bright star requires high contrast or a hypercontrast optical imaging system capable of controlling unwanted radiation within the system to one part in ten to the 11th. This paper identifies several physical phenomena that affect image quality in high contrast imaging systems. Polarization induced at curved metallic surfaces and by anisotropy in the deposition process (Smith-Purcell effect) along with beam shifts introduced by the Goos-Hachen effect are discussed. A typical configuration is analyzed, and technical risk mitigation concepts are discussed.

polorization↗
NASA NTRS2008

Processing LiDAR Data to Predict Natural Hazards

ELF-Base and ELF-Hazards (wherein 'ELF' signifies 'Extract LiDAR Features' and 'LiDAR' signifies 'light detection and ranging') are developmental software modules for processing remote-sensing LiDAR data to identify past natural hazards (principally, landslides) and predict future ones. ELF-Base processes raw LiDAR data, including LiDAR intensity data that are often ignored in other software, to create digital terrain models (DTMs) and digital feature models (DFMs) with sub-meter accuracy. ELF-Hazards fuses raw LiDAR data, data from multispectral and hyperspectral optical images, and DTMs and DFMs generated by ELF-Base to generate hazard risk maps. Advanced algorithms in these software modules include line-enhancement and edge-detection algorithms, surface-characterization algorithms, and algorithms that implement innovative data-fusion techniques. The line-extraction and edge-detection algorithms enable users to locate such features as faults and landslide headwall scarps. Also implemented in this software are improved methodologies for identification and mapping of past landslide events by use of (1) accurate, ELF-derived surface characterizations and (2) three LiDAR/optical-data-fusion techniques: post-classification data fusion, maximum-likelihood estimation modeling, and hierarchical within-class discrimination. This software is expected to enable faster, more accurate forecasting of natural hazards than has previously been possible.

Fairweather, Ian↗
NASA NTRS2019

An Automatic Light Rain Detection Algorithm on NASA MPLNET Lidar Observations in the Frame of WMO GALION Project

The water cycle strongly influences life on Earth. In particular, the precipitation modifies the atmospheric column thermodynamics through the process of evaporation and serves as a proxy for latent heat modulation. For this reason, a correct precipitation parameterization (especially low-intensity precipitation) at global scale, bedsides improving our understanding of the hydrological cycle, it is crucial to reduce the associated uncertainty of the global climate models to correctly forecast future scenarios, i.e. to apply fast mitigation strategies. In this study we developed an algorithm to automatically detect precipitation from lidar measurements obtained by the National and Aeronautics Space Administration (NASA) Micropulse lidar network (MPLNET) permanent observational site in Goddard. The algorithm, once full operational, will deliver in Near Real Time (latency 1.5h) a new rain mask product that will be publicly available on MPLNET website as part of the new Version 3 Level 1.5 data. The methodology, based on an image processing technique, can detect only light precipitation events (defined by intensity and duration) as the morphological filters used through the detection process are applied on the lidar volume depolarization ratio range corrected composite images, i.e. heavy rain events are unusable as the lidar signal is completely extinguished after few meters in the precipitation or no signal detected because of the water accumulated on the receiver optics. Results from the algorithm, besides filling a gap in precipitation and virga detection by radars, are of particular interest for the scientific community because will help to better understand long-term aerosol-cloud interactions and aerosol atmospheric removal (scavenging effect) by rain as multi-year database being available for several MPLNET permanent observational sites across the globe. Moreover, we developed the automatic algorithm at Universitat Politecnica de Catalunya (UPC) Barcelona, the unique permanent observation station member of MPLNET and the European Aerosol Lidar Network (EARLINET) In the future the algorithm can be then easily applied to any other lidar and/or ceilometer network infrastructure in the frame of World Meteorological Organization (WMO) Global Aerosol Watch (GAW) aerosol lidar observation network (GALION)

Simone Lolli↗
NASA NTRS2021

Features and Characteristics of the New NASA MicroPuLse NETwork (MPLNET) Automatic Rain Detection Algorithm

The water cycle strongly influences life on Earth. In particular, the precipitation modifies the atmospheric column thermodynamics through the process of evaporation and serves as a proxy for latent heat modulation. For this reason, a correct precipitation parameterization (especially low-intensity precipitation) at global scale, bedsides improving our understanding of the hydrological cycle, it is crucial to reduce the associated uncertainty of the global climate models to correctly forecast future scenarios, i.e. to apply fast mitigation strategies. In this study we developed an algorithm to automatically detect precipitation from lidar measurements obtained by the National and Aeronautics Space Administration (NASA) Micropulse lidar network (MPLNET) permanent observational site in Goddard. The algorithm, once full operational, will deliver in Near Real Time (latency 1.5h) a new rain mask product that will be publicly available on MPLNET website as part of the new Version 3 Level 1.5 data. The methodology, based on an image processing technique, can detect only light precipitation events (defined by intensity and duration) as the morphological filters used through the detection process are applied on the lidar volume depolarization ratio range corrected composite images, i.e. heavy rain events are unusable as the lidar signal is completely extinguished after few meters in the precipitation or no signal detected because of the water accumulated on the receiver optics.

S. Lolli↗
NASA NTRS2020

Satellite-To-Satellite Imaging in Support of LEO Optical Navigation, Using the ASTERIA Cubesat

The Arcsecond Space Telescope Enabling Research in Astrophysics (ASTERIA) was a 6-unit CubeSat technology demonstration mission that was built at NASA’s Jet Propulsion Laboratory (JPL) and deployed from the International Space Station (ISS) on November 20th, 2017. After successfully completing its 90-day primary mission that demonstrated arcsecond-level line-of-sight pointing and focal plane thermal stability for exoplanet detection, it entered an extended mission performing onboard software demonstrations alongside science until end of mission in December 2019. At the end of its lifetime it was being used as a demonstration platform for several experiments, including low earth orbit (LEO) optical navigation operations. With its visible light astrometric camera and stable attitude control system, the ASTERIA spacecraft showed itself to be a capable platform for the imaging of geosynchronous satellites from LEO. This paper will describe the imagery attained in flight and also the image processing algorithms that were developed to render that imagery into navigation quality data. These algorithms dealt with hot pixel filtering, noise modeling, attitude registration, star signal rejection and satellite signal identification. Brightness prediction algorithms used for target selection will also be discussed.

Fesq, Lorraine↗
NASA NTRSDate not supplied

Integrated Modeling for Payload Test of the Roman Space Telescope

The Nancy Grace Roman Telescope (RST) is a NASA observatory designed to unravel the secrets of dark energy and dark matter, search for and image exoplanets, and explore many topics in infrared optics. Scheduled to launch in no earlier than October 2026, this 2.4 meter aperture telescope has a field of view 100 times greater than the Hubble Space Telescope. The mission is currently in its construction phase, where integrated modeling between thermal, structural, and optical models of the observatory is necessary to demonstrate science quality images over the range of operational parameters. This presentation discusses the most recent integrated modeling analysis cycle for Roman, including model correlation with our instrument level testing. We include a discussion on improved processes of the handling of the various flows of data between the modeling disciplines and discipline specific monte-carlo analysis predictions. We will finish with the predicted uncertainties and expected performance for our upcoming observatory alignment verification test using machine learning algorithms.

telescope↗
NASA NTRS2019

Lyman-Alpha Imaging Polarimetry with the CLASP2 Sounding Rocket Mission

Ultraviolet polarimetry offers a unique opportunity to explore the upper solar chromosphere and the transition region (TR) to the million-degree corona. These outer atmospheric regions play a key role in the transfer of mass and energy from the solar photosphere to the corona. With a sounding rocket experiment called the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP), in September 2015 we succeeded in obtaining the first measurement of the linear polarization produced by scattering processes in the hydrogen Lyman-alpha line of the solar disk radiation. The analysis and interpretation of such spectro-polarimetric observation allowed us to obtain information on the geometrical complexity of the corrugated surface that delineates the TR, as well as on the magnetic field strength via the Hanle effect. At the same time, the CLASP slit-jaw (SJ) optics system, which is a Lyman-alpha filter imager characterized by a FWHM (Full Width Half Maximum) equals 7 nanometers, allowed us to obtain broad-band Stokes-I and Q/I images over a large field of view. The obtained broad-band Q/I images are dominated by the scattering polarization signals of the Lyman-alpha wings, and not by the much weaker line-center signals where the Hanle effect operates. On April 11, 2019, we performed another sounding rocket experiment, called the Chromospheric LAyer Spectro-Polarimeter (CLASP2). We used the same instrument after significant modifications in order to obtain spectro-polarimetric observations of a plage and a quiet region in the Mg II h & k lines. At the same time, the CLASP2 SJ optics system allowed us to obtain broad-band Q/I and U/I images around the Lyman-alpha wavelength, in addition to the well- known SJ intensity images.

Kano, Ryouhei↗
NASA NTRS1986

Design considerations for the beam-waveguide retrofit of a ground antenna station

Retrofitting an antenna that was originally designed without a beam waveguide introduces special difficulties because it is desirable to minimize alteration of the original mechanical truss work and to image the actual feed without distortion at the focal point of the dual-shaped reflector. To obtain an acceptable image, certain Geometrical Optics (GO) design criteria are followed as closely as possible. The problems associated with applying these design criteria to a 34-meter dual-shaped DSN (Deep Space Network) antenna are discussed. The use of various diffraction analysis techniques in the design process is also discussed. GTD and FFT algorithms are particularly necessary at the higher frequencies, while Physical Optics and Spherical Wave Expansions proved necessary at the lower frequencies.

Veruttipong, T.↗
NASA NTRS1988

Atmospheric Emissions Photometric Imaging (AEPI) experiment

Space plasma physics will be studied on the Atmospheric Laboratory for Applications and Science (ATLAS 1) NASA mission during the Atmospheric Emissions Photometric Imaging (AEPI) experiment. The basic scientific objective of the AEPI is the investigation of the upper atmosphere-ionosphere and the space shuttle environment. The experiment areas of the AEPI include: (1) the investigation of ionospheric transport processes by observing Mg(+) ions; (2) studies of optical properties of artificially induced electron beams; (3) measurement of electron cross sections for selected atmospheric species; (4) studies of natural airglow; and (5) studies of natural auroras. On ATLAS 1, optical emissions generated by the shuttle (shuttle ram glow) will also be investigated.

Mende, S. B.↗
NASA NTRS2007

Photometric Calibration of Consumer Video Cameras

Equipment and techniques have been developed to implement a method of photometric calibration of consumer video cameras for imaging of objects that are sufficiently narrow or sufficiently distant to be optically equivalent to point or line sources. Heretofore, it has been difficult to calibrate consumer video cameras, especially in cases of image saturation, because they exhibit nonlinear responses with dynamic ranges much smaller than those of scientific-grade video cameras. The present method not only takes this difficulty in stride but also makes it possible to extend effective dynamic ranges to several powers of ten beyond saturation levels. The method will likely be primarily useful in astronomical photometry. There are also potential commercial applications in medical and industrial imaging of point or line sources in the presence of saturation.This development was prompted by the need to measure brightnesses of debris in amateur video images of the breakup of the Space Shuttle Columbia. The purpose of these measurements is to use the brightness values to estimate relative masses of debris objects. In most of the images, the brightness of the main body of Columbia was found to exceed the dynamic ranges of the cameras. A similar problem arose a few years ago in the analysis of video images of Leonid meteors. The present method is a refined version of the calibration method developed to solve the Leonid calibration problem. In this method, one performs an endto- end calibration of the entire imaging system, including not only the imaging optics and imaging photodetector array but also analog tape recording and playback equipment (if used) and any frame grabber or other analog-to-digital converter (if used). To automatically incorporate the effects of nonlinearity and any other distortions into the calibration, the calibration images are processed in precisely the same manner as are the images of meteors, space-shuttle debris, or other objects that one seeks to analyze. The light source used to generate the calibration images is an artificial variable star comprising a Newtonian collimator illuminated by a light source modulated by a rotating variable neutral- density filter. This source acts as a point source, the brightness of which varies at a known rate. A video camera to be calibrated is aimed at this source. Fixed neutral-density filters are inserted in or removed from the light path as needed to make the video image of the source appear to fluctuate between dark and saturated bright. The resulting video-image data are analyzed by use of custom software that determines the integrated signal in each video frame and determines the system response curve (measured output signal versus input brightness). These determinations constitute the calibration, which is thereafter used in automatic, frame-by-frame processing of the data from the video images to be analyzed.

Suggs, Robert↗
NASA NTRS2014

Remote Recession Sensing of Ablative Heat Shield Materials

Material recession and charring are two major processes determining the performance of ablative heat shield materials. Even in ground testing, the characterization of these two mechanisms relies on measurements of material thickness before and after testing, thus providing only information integrated over the test time. For recession measurements, optical methods such as imaging the sample surface during testing are under investigation but require high alignment and instrument effort, therefore being not established as a standard measurement method. For char depth measurements, the most common method so far consists in investigation of sectioned samples after testing or in the case of Stardust where core extractions were performed to determine char information. In flight, no reliable recession measurements are available, except total recession after recovering the heat shield on ground. Developments of mechanical recession sensors have been started but require substantial on board instrumentation adding mass and complexity. In this work, preliminary experiments to evaluate the feasibility of remote sensing of material recession and possibly char depth through optically observing the emission signatures of seeding materials in the post shock plasma is investigated. It is shown that this method can provide time resolved recession measurements without the necessity of accurate alignment procedures of the optical set-up and without any instrumentation on board of a spacecraft. Furthermore, recession data can be obtained without recovering flight hardware which would be a huge benefit for inexpensive heat shield material testing on board of small re-entry probes, e.g. on new micro-satellite re-entry probes as a possible future application of Cubesats or RBR

instrumentation↗
NASA NTRS2020

Optical Navigation for Autonomous Approach of Small Unknown Bodies

State of the practice in navigation around small celestial bodies heavily relies on ground sup- port and human skill, in particular, for perception-based operations such as optical navigation and mapping. This leads to longer duration and more complex mission operations and sub- sequently higher cost. Furthermore, it imposes limitations for certain missions such as fast fly-bys or multi-agent operations. In this work, we present an autonomous navigation strat- egy suitable for approaching small unexplored bodies. During the approach, we estimate the body’s physical properties as well as the spacecraft’s relative trajectory and associated un- certainties. The autonomous navigation strategy, which is solely based on optical measure- ments, begins as soon as the body becomes resolved in the navigation camera and terminates at the start of proximity operations, when the spacecraft makes its first trajectory correction to stay in the vicinity of the body. Our strategy uses multiple image-processing algorithms: light-curve analysis for estimating the target body’s rotation rate, Shape-from-Silhouette for reconstructing the 3D shape and estimating its rotation pole, and feature tracking tailored to Small-Body images for estimating relative navigation parameters. We used the Mission Analysis, Operations, and Navigation Toolkit Environment (MONTE) developed by the Jet Propulsion Laboratory to evaluate the feasibility of this multi-phase navigation strategy using simulated images of an approach trajectory. We used the Rosetta mission data to generate photorealistic images to characterise the performance of this approach. This work is based on the assumptions that the spacecraft attitude is known, the body is a principal-axis rotator, a-priori estimates of ephemerides and scale are available, and the body is observed from a zero sun phase only during initial approach. Preliminary results show orbit determination performance that is on par with the human navigation from the Rosetta mission; albeit with a 1% bias in spacecraft-target radial distance estimate. The bias error is likely due to the robustness and accuracy of the visual tracking under dynamic lighting conditions and per- spective changes, which decrease accuracy.

Villa, Jacopo↗
NASA NTRS2000

Detection of Objects Hidden in Highly Scattering Media Using Time-Gated Imaging Methods

Non-intrusive and non-invasive optical imaging techniques has generated great interest among researchers for their potential applications to biological study, device characterization, surface defect detection, and jet fuel dynamics. Non-linear optical parametric amplification gate (NLOPG) has been used to detect back-scattered images of objects hidden in diluted Intralipid solutions. To directly detect objects hidden in highly scattering media, the diffusive component of light needs to be sorted out from early arrived ballistic and snake photons. In an optical imaging system, images are collected in transmission or back-scattered geometry. The early arrival photons in the transmission approach, always carry the direct information of the hidden object embedded in the turbid medium. In the back-scattered approach, the result is not so forth coming. In the presence of a scattering host, the first arrival photons in back-scattered approach will be directly photons from the host material. In the presentation, NLOPG was applied to acquire time resolved back-scattered images under the phase matching condition. A time-gated amplified signal was obtained through this NLOPG process. The system's gain was approximately 100 times. The time-gate was achieved through phase matching condition where only coherent photons retain their phase. As a result, the diffusive photons, which were the primary contributor to the background, were removed. With a large dynamic range and high resolution, time-gated early light imaging has the potential for improving rocket/aircraft design by determining jets shape and particle sizes. Refinements to these techniques may enable drop size measurements in the highly scattering, optically dense region of multi-element rocket injectors. These types of measurements should greatly enhance the design of stable, and higher performing rocket engines.

Galland, Pierre A.↗