Search NASA⌕ Search

SEARCH · Search NASA

Results for “Knowledge Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Wake Instability Behind Isolated Trip Near the Leading Edge of the BOLT-II Configuration

The BOLT-II (Holden Mission) configuration is an extended version of the BOLT flight article and depicts hypersonic boundary-layer transition in the presence of multiple and potentially interacting instability mechanisms. Several numerical studies of the boundary-layer instabilities over these configurations have been reported in the recent literature, including our previous studies of the modal instability characteristics of boundary-layer streaks adjacent to the minor-axis symmetry plane of the BOLT configuration and the wake instabilities behind a diamond planform (“pizza-box”) trip along the symmetry plane on the secondary side of the BOLT-II configuration. The present work extends the latter study to a scaled version of the same trip that is located in the region of nonzero crossflow in the vicinity of the leading edge at X/L = 0.5. Collectively, the trips along the symmetry plane and near the leading edge are the focus of the NASA roughness experiment on the secondary side of the BOLT-II configuration. The laminar basic state computation at the nominal flight design condition of Re ∞ = 5.44 x 10 6 /m and Re ∞ = 2.5 x 10 6 /m shows that the leading-edge trip with k/δ ≈ 0.70 and planform-side-length-to-height ratio of b/k = 3.0 induces multiple asymmetric, longitudinal streaks within the trip wake. The most prominent streak among these resembles a finite amplitude crossflow vortex, and it supports the amplification of multiple families of unstable modes. The application of multi-dimensional instability analysis to the wake flow reveals that the most amplified unstable mode can achieve a peak N-factor of up to 20 by X/L = 0.80, indicating that the onset of transition is more than likely to occur within eighty percent of the model length. To the best of our knowledge, the present study represents the first analysis including nonparallel and curvature effects on hypersonic tripwake instabilities in the presence of boundary-layer crossflow over a three-dimensional configuration.

Boundary layer transition↗

Physical Properties of the Stone Meteorites: Implications for the Properties of Their Parent Bodies

The physical properties of the stone meteorites provide important clues to understanding the formation and physical evolution of material in the Solar protoplanetary disk as well providing indications of the properties of their asteroidal parent bodies. Knowledge of these properties is essential for modeling a number of Solar System processes, such as bolides in planetary atmospheres, the thermal inertia of atmosphereless solid body surfaces, and the internal physical and thermal evolution of asteroids and rock-rich icy bodies. In addition, insight into the physical properties of the asteroids is important for the design of robotic and crewed reconnaissance, lander, and sample return spacecraft missions to the asteroids. One key property is meteorite porosity, which ranges from 0% to more than 40%, similar to the range of porosities seen in asteroids. Porosity affects many of the other physical properties including thermal conductivity, speed of sound, deformation under stress, strength, and response to impact. As a result of the porosity, the properties of most stone meteorites differ significantly from those of compact terrestrial rocks, whose physical properties have been used in many models of asteroid behavior. A few physical properties, such as grain density, magnetic susceptibility, and heat capacity are not functions of porosity. Taken together, the grain density and the magnetic susceptibility can be used to classify unweathered or minimally weathered ordinary chondrites. This provides a rapid screening technique to identify heterogeneous samples, classify new samples, and identify misclassified meteorites or interlopers in strewn fields.

Chondritic meteorites↗

Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS): the 2022 Deployment

The Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS) is a NASA-supported field campaign to study snowstorms particularly over the northeastern United States. Snowfall within these winter storms is often organized in banded structures that can vary on multiple scales. The goals of IMPACTS are to characterize the spatial and temporal scale of snowbands, understand the processes controlling the structure and evolution of the bands and apply this knowledge to improving remote sensing and numerical modeling. IMPACTS takes place over three winter seasons, 2020, 2022 and 2023. IMPACTS flies two aircraft: the ER-2 equipped with satellite-simulating remote sensing instruments; and the P-3 equipped with in situ microphysics probes and environmental instrumentation. Stationary and mobile radar facilities and mobile sounding teams round out the observational assets. The preliminary results from the 2022 deployment are highlighted here.

Lynn A McMurdie↗

An Overview of Plume-Surface Interaction Testing and Research

NASA has studied rocket plume-surface interactions caused by spacecraft since the Apollo era to reduce risk to landing vehicles. The study of plume-surface interactions is a multi-discipline effort, spanning aerospace engineering to planetary science. Historical testing for Apollo and Viking produced methods, terms, and datasets that influence the field today. Research conducted over the past two decades has expanded our understanding of plume-surface interaction phenomena, but the problem remains resistant to a robust predictive capability. Contemporary experimental and modeling efforts to understand and retire strategic knowledge gaps will be discussed, with a focus on work conducted under NASA’s Plume-Surface Interaction Project and the upcoming Human Landing System Plume-Surface Interaction Risk Reduction Ground Test.

Wesley A Chambers↗

Workshop Goals and MEO Overview

To provide an overview of current meteor instrumentation, meteoroid models, and meteor shower forecasting techniques.§Identify knowledge gaps and areas of focus for the hazardousmeteoroid environment (0.1 to 1 cm). Foster collaborations and discussions among North American meteor researchers.

MEO↗

Yawed-Rolling Tire Mechanical Properties Testing of the Navy T-45 Aircraft Tires

The T-45 Goshawk is a United States Navy Jet aircraft used primarily as a trainer. The aircraft design makes use of "off the shelf" hardware as much as possible and was found to have unusual directional control issues during around operations. The aircraft was involved in numerous pilot-induced-oscillation incidents as well as observed to have unusual directional control reactions to failed main gear tires, a condition that is normally handled relatively easily by conventional aircraft steering control techniques. The behavior of the aircraft's tires had previously been modeled in simulators as a result of approximations provided in 40-year-old reference publications. Since knowledge of the true tire cornering and braking behavior is essential to modeling, understanding, and fixing directional control problems, the United States Navy requested assistance from the NASA Langley Research Center's (LARC) Aircraft Landing Dynamics Facility (ALDF) to define the yawed-rolling mechanical properties of the T-45 aircraft tires. The purpose of this report is to document the results of testing the subject tires at the NASA LaRC ALDF in September 1998. Brief descriptions of the Instrumented Tire Test Vehicle (ITTV) are included to familiarize the reader with the ITTV capabilities, data acquisition system, test and measurement techniques, data accuracy, and analysis and presentation of the testing results.

Daugherty, Robert H.↗

Remote sensor evaluation model

A format is presented that enables the specification of a sensor system configuration, given a set of knowledge requirements to be satisfied by an earth observation satellite. This format, in a modified form, may also be used to determine whether or not a knowledge requirement can be satisfied by existing sensors, and to indicate the need for developing new sensors. It can be applied to large sets of knowledge requirements, so that versatile, multipurpose earth observation sensor systems can be developed. Implementation of the model to a combination of Nimbus G&H and ERTS E&F missions is shown as a test of its viability. The findings are extensively tabulated, and they tend to support the method.

Kerne, B.↗

A mathematical model for spatial orientation from pictorial perspective displays

A previously formulated mathematical model, describing how observers reconstruct three-dimensional spatial layouts from perspective projections, has been extended to more complex situations. The model assumes that the observer has a priori knowledge of certain characteristics of the viewed objects, like size, shape, or parallelism or perpendicularity of lines or planes. These assumptions are used in a three-dimensional process to reconstruct a spatial layout that `best matches' the perceived lines of sight to the object coordinates. Sources of errors and biases in this process are specified and their effects on model outputs are discussed. An experiment, in which eight subjects judged the relative direction of one object with respect to another, has been conducted to validate the model. The model has been found to generally reproduce the systematic trends of the experimental results and also has provided an analytical explanation for them. The mathematical model is expected to be a useful tool in analyzing and developing pictorial perspective flight displays.

Grunwald, Arthur J.↗

Adaptive Fuzzy Control of a Direct Drive Motor: Experimental Aspects

This paper presents a state feedback adaptive control method for position and velocity control of a direct drive motor. The proposed control scheme allows for integrating heuristic knowledge with mathematical knowledge of a system. It performs well even when mathematical model of the system is poorly understood. The controller consists of an adaptive fuzzy controller and a supervisory controller. The supervisory controller requires only knowledge of the upper bound and lower bound of the system parameters. The fuzzy controller is based on fuzzy basis functions and states of the system. The adaptation law is derived based on the Lyapunov function which ensures that the state of the system asymptotically approaches zero. The proposed controller is applied to a direct drive motor with payload and parameter uncertainty, and the effectiveness is experimentally verified. The real-time performance is compared with simulation results.

Medina, E.↗

Adaptive Fuzzy Control of a Direct Drive Motor

This paper presents a state feedback adaptive control method for position and velocity control of a direct drive motor. The proposed control scheme allows for integrating heuristic knowledge with mathematical knowledge of a system. It performs well even when mathematical model of the system is poorly understood. The controller consists of an adaptive fuzzy controller and a supervisory controller. The supervisory controller requires only knowledge of the upper bound and lower bound of the system parameters. The fuzzy controller is based on fuzzy basis functions and states of the system. The adaptation law is derived based on the Lyapunov function which ensures that the state of the system asymptotically approaches zero. The proposed controller is applied to a direct drive motor with payload and parameter uncertainty, and the effectiveness is verified by simulation results.

Medina, E.↗

Rate Constant for the Reaction CH3 + CH3 Yields C2H6 at T = 155 K and Model Calculation of the CH3 Abundance in the Atmospheres of Saturn and Neptune

The column abundances of CH3 observed by the Infrared Space Observatory (ISO) satellite on Saturn and Neptune were lower than predicted by atmospheric photochemical models, especially for Saturn. It has been suggested that the models underestimated the loss of CH3 due to poor knowledge of the rate constant k of the CH3 + CH3 self-reaction at the low temperatures and pressures of these atmospheres. Motivated by this suggestion, we undertook a combined experimental and photochemical modeling study of the CH3 + CH3 reaction and its role in determining planetary CH3 abundances. In a discharge flow-mass spectrometer system, k was measured at T = 155 K and three pressures of He. The results in units of cu cm/molecule/s are k(0.6 Torr) = 6.82 x 10(exp -11), k(1.0 Torr) = 6.98 x 10(exp -11), and k(1.5 Torr) = 6.91 x 10(exp -11). Analytical expressions for k were derived that (1) are consistent with the present laboratory data at T = 155 K, our previous data at T = 202 K and 298 K, and those of other studies in He at T = 296-298 K and (2) have some theoretical basis to provide justification for extrapolation. The derived analytical expressions were then used in atmospheric photochemical models for both Saturn and Neptune. These model results reduced the disparity with observations of Saturn, but not with observations of Neptune. However, the disparity for Neptune is much smaller. The solution to the remaining excess CH3 prediction in the models relative to the ISO observations lies, to a large extent, elsewhere in the CH3 photochemistry or transport, not in the CH3 + CH3 rate.

Cody, Regina J.↗

Scientific Objectives, Measurement Needs, and Challenges Motivating the PARAGON Aerosol Initiative

Aerosols are involved in a complex set of processes that operate across many spatial and temporal scales. Understanding these processes, and ensuring their accurate representation in models of transport, radiation transfer, and climate, requires knowledge of aerosol physical, chemical, and optical properties and the distributions of these properties in space and time. To derive aerosol climate forcing, aerosol optical and microphysical properties and their spatial and temporal distributions, and aerosol interactions with clouds, need to be understood. Such data are also required in conjunction with size-resolved chemical composition in order to evaluate chemical transport models and to distinguish natural and anthropogenic forcing. Other basic parameters needed for modeling the radiative influences of aerosols are surface reflectivity and three-dimensional cloud fields. This large suite of parameters mandates an integrated observing and modeling system of commensurate scope. The Progressive Aerosol Retrieval and Assimilation Global Observing Network (PARAGON) concept, designed to meet this requirement, is motivated by the need to understand climate system sensitivity to changes in atmospheric constituents, to reduce climate model uncertainties, and to analyze diverse collections of data pertaining to aerosols. This paper highlights several challenges resulting from the complexity of the problem. Approaches for dealing with them are offered in the set of companion papers.

optical depth↗

Systems Health Management and Decision Making

In order to tackle and solve the prediction problem, it is essential to have awareness of the current state and health of the system, especially since it is necessary to perform condition-based predictions. To be able to accurately predict the future state of any system, it is required to possess knowledge of its current and future operations. Given models of the current and future system behavior, the general approach of model-based prognostics can be employed as a solution to the prior stated prediction problem. In case of electric aircrafts, computing remaining flying time is safety-critical, since an aircraft that runs out of power (battery charge) while in the air will eventually lose control leading to catastrophe. In order to tackle and solve the prediction problem, it is essential to have awareness of the current state and health of the system, especially since it is necessary to perform condition-based predictions. To be able to predict the future state of the system, it is also required to possess knowledge of the current and future operations of the vehicle. Discuss research approach to develop a system level health monitoring safety indicator which runs estimation and prediction algorithms to estimate remaining useful life predictions at system as well as subsystem levels. Given models of the current and future system behavior, a general approach of model-based prognostics can be employed as a solution to the prediction problem and further for decision making. In addition a digital twin concept is being implemented in the framework to demonstrate verification and validation of developed algorithms. Note - This presentation is for the short workshop conducted at the same conference and contains all previously approved and published information.

Systems Health Managent↗

The fundamental structure function of oscillator noise models

Continuous-time models of oscillator phase noise x(t) usually have stationary nth differences, for some n. The covariance structure of such a model can be characterized in the time domain by the structure function: D sub n (t;gamma sub 1, gamma sub 2) = E delta (n) sub gamma sub 1 x(s+t) delta(n) sub gamma sub 2 x (s). Although formulas for the special case D sub 2 (0;gamma,gamma) (the Allan variance times 2 gamma(2)) exist for power-law spectral models, certain estimation problems require a more complete knowledge of (0). Exhibited is a much simpler function of one time variable, D(t), from which (0) can easily be obtained from the spectral density by uncomplicated integrations. Believing that D(t) is the simplest function of time that holds the same information as (0), D(t) is called the fundamental structure function. D(t) is computed for several power-law spectral models. Two examples are D(t) = K/t/(3) for random walk FM, D(t) = Kt(2) 1n/t/ for flicker FM. Then, to demonstrate its use, a BASIC program is given that computes means and variances of two Allan variance estimators, one of which incorporates a method of frequency drift estimation and removal.

Greenhall, C. A.↗

Systems engineering studies of on-orbit assembly operation

While the practice of construction has a long history, the underlying theory of construction is relatively young. Very little has been documented as to techniques of logistic support, construction planning, construction scheduling, construction testing, and inspection. The lack of 'systems approaches' to construction processes is certainly one of the most serious roadblocks to the construction of space structures. System engineering research efforts at CSC are aimed at developing concepts and tools which contribute to a systems theory of space construction. The research is also aimed at providing means for trade-offs of design parameters for other research areas in CSC. Systems engineering activity at CSC has divided space construction into the areas of orbital assembly, lunar base construction, interplanetary transport vehicle construction, and Mars base construction. A brief summary of recent results is given. Several models for 'launch-on-time' were developed. Launch-on-time is a critical concept to the assembly of such Earth-orbiting structures as the Space Station Freedom, and to planetary orbiters such as the Mars transfer vehicle. CSC has developed a launch vehicle selection model which uses linear programming to find optimal combinations of launch vehicles of various sizes (Atlas, Titan, Shuttles, HLLV's) to support SEI missions. Recently, the Center developed a cost trade-off model for studying on orbit assembly logistics. With this model it was determined that the most effective size of the HLLV would be in the range of 120 to 200 metric tons to LEO, which is consistent with the choices of General Stafford's Synthesis Group Report. A second-generation Dynamic Construction Activities Model ('DYCAM') process model has been under development, based on our past results in interruptability and our initial DYCAM model. This second-generation model is built on the paradigm of knowledge-based expert systems. It is aimed at providing answers to two questions: (1) what are some necessary or sufficient conditions for judging conceptual designs of spacecraft?, and (2) can a methodology be formulated such that these conditions may be used to provide computer-aided tools for evaluating conceptual designs and planning for space assembly sequences? Early simulation results indicate that the DYCAM model has a clear ability to emulate and simulate human orbital construction processes.

Morgenthaler, George W.↗

Two-dimensional transonic wind-tunnel wall interference corrections based on the Euler equations

A procedure for the evaluation of wall interference corrections for two-dimensional models is presented. The Mach number and angle-of-attack corrections require the numerical solution of the Euler equations. Pressure measurements are required near the wind tunnel walls. The correction procedure also requires knowledge of the free-stream Mach number, the model geometry, and the lift force experienced by the model. The residual interference not accounted for by the Mach number and angle-of-attack corrections is estimated.

Rizk, M. H.↗

Automatically calibrating admittances in KATE's autonomous launch operations model

This report documents a 1000-line Symbolics LISP program that automatically calibrates all 15 fluid admittances in KATE's Autonomous Launch Operations (ALO) model. (KATE is Kennedy Space Center's Knowledge-based Autonomous Test Engineer, a diagnosis and repair expert system created for use on the Space Shuttle's various fluid flow systems.) As a new KATE application, the calibrator described here breaks new ground for KSC's Artificial Intelligence Lab by allowing KATE to both control and measure the hardware she supervises. By automating a formerly manual process, the calibrator: (1) saves the ALO model builder untold amounts of labor; (2) enables quick repairs after workmen accidently adjust ALO's hand valves; and (3) frees the modeler to pursue new KATE applications that previously were too complicated. Also reported are suggestions for enhancing the program: (1) to calibrate ALO's TV cameras, pumps, and sensor tolerances; and (2) to calibrate devices in other KATE models, such as the shuttle's LOX and Environment Control System (ECS).

Morgan, Steve↗

Adding GPU Support to the Markov Chain Monte Carlo Code Catmip

In geophysics, we are confronted with many under-determined inverse problems. For example, all of our observations of earthquakes are made at the Earth’s surface. So, when we try to infer how slip during an earthquake evolves in space and time, we find that there are many potential slip histories that are consistent with our limited observations and our understanding of earthquake physics. One way to approach these problems is with Bayesian analysis which allows us to infer the ensemble of all potential slip models that satisfy the observations and our prior knowledge of earthquake physics. In Bayesian analysis, our prior knowledge is known as the prior probability density function or prior PDF, the fit to the data is known as the data likelihood, and the target PDF that satisfies both the prior PDF and data likelihood is known as the posterior PDF. However, simulating the posterior PDF typically requires using Markov Chain Monte Carlo (MCMC) to draw tens of billions of random realizations of earthquake slip models, which may not be computationally feasible. To make this and similar geophysical inversions computationally tractable, we developed the Cascading Adaptive Transitional Metropolis In Parallel (CATMIP) algorithm. CATMIP is an efficient parallel Markov Chain Monte Carlo (MCMC) sampler that is used for model fitting and uncertainty quantification in geophysics. Example use cases are earthquake rupture modeling, determining mineral composition on Mars, reconstructing the history of ocean salinity, and historical earthquake relocation. CATMIP employs many parallel instances of the Metropolis algorithm for sampling in a transitioning framework. Transitioning is a process in which a set of random samples at equilibrium with a known probability density function (PDF) are used as seeds for the Markov chains to sample successive target PDFs that incrementally move the distribution from the starting seeds to the final desired PDF that describes the relative plausibility of potential values for the model parameters. The algorithm is implemented as a Master-Worker model employing MPI for communication. The worker processes are loosely coupled with global parameters periodically optimized by the master process. This provides a very high amount of parallelism with little communication between updates. During the presentation we will discuss the history of the algorithm and elaborate the earthquake rupture modeling use case for the CATMIP package. Our first step toward GPU optimization was to optimize the code for the CPU. CPU profiling revealed that most of the compute time is spent in calls to level 2 BLAS routines and calls to GSL random number generators. We revised the algorithm to employ level 3 BLAS routines instead. In our presentation we will describe how this was accomplished. Adding GPU support to CATMIP consisted mostly of replacing the calls to GSL with calls to GPU vendor-provided library routines. A small number of loops were directly implemented in CUDA. In the presentation will provide implementation details. Finally, we will discuss methods for profiling and opportunities for further optimizing GPU execution. By creating a code with the flexibility to run on either a CPU or GPU architecture, CATMIP can be used on systems ranging from large CPU-based HPC environments to single servers with GPU acceleration and everything in between.

HECC↗