Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

X-ray absorption near edge structure spectrometry study of nickel and lead speciation in coals and coal combustion products

The fate and environmental impacts of trace elements from coal fired power stations are a significant concern because of the large quantities of coal used as an energy source. The ultimate environmental fate and health impact of some of these trace elements is dependent on their various forms and oxidation states. Nickel and lead are two of the trace elements classified as 'priority pollutants' by the National Pollutant Inventory (NPI) in Australia. This study attempts to understand speciation of nickel and lead in coal and coal combustion products from five coal fired power stations in Australia where bituminous rank coals are utilized. Non-destructive X-ray Absorption Near Edge Structure Spectrometry (XANES) was used to determine speciation of these metals. Semiquantitative speciation of nickel and lead was calculated using a linear combination fit of XANES spectra obtained for selected pure reference compounds. In all fly ash samples, 28-80% of nickel was present as nickel in NiSO{sub 4} form, which is a more toxic and more bioavailable form of nickel. Less toxic NiO was detected in fly ash samples in the range of 0-15%. Speciation of lead revealed that 65-70% is present as PbS in the feed coals. In all fly ash samples analyzed, lead comprised different proportions of PbCl{sub 2}, PbO, and PbSO{sub 4}. PbCl{sub 2} and PbSO{sub 4} contents varied between 30-70% and 30-60%, respectively. Chemical reactions resulting in nickel and lead transformation that are likely to have occurred in the post-combustion environment are discussed. 22 refs., 7 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Atomistic modeling of ultra-thin surface oxide growth on a ternary alloy : oxidation of Al-Ni-Fe.

By employing variable-charge molecular dynamics, surface oxide film growth on aluminum-nickel-iron alloys has been studied at 300 and 600 K. The dynamics of oxidation and oxide growth is strongly dependent on the composition of the initial alloy and the ambient temperature. Higher content of Ni and Fe in Al alloys is found to reduce the oxide growth kinetics; 15% Ni + 15% Fe Al alloy yielded 30-40% less growth at 400 ps oxygen exposure compared to pure Al. We observe dopant segregation, which disrupts the interaction between O atoms and Al atoms in the alloy, leading to a nonlinear oxide growth profile in the case of ternary Al-Ni-Fe alloy. Compared to oxidation at 300 K, 30% more oxide layer was yielded at 600 K, due to the elevated temperature. The simulated oxide kinetics indicates that the growth rate of anion surpasses the cation rate with higher sensitivity to the stoichiometry of the base metal substrate. Charge state analysis provides insights into the evolution of cation and anion species as the oxide layer grows. In particular, due to higher correlation, Fe shows a high rate of oxidation when the content is high, whereas the rate of Ni oxidation is consistently low. Density profile analysis suggests the segregation of dopant atoms below the growing ultrathin oxide layer, showing the presence of a layer-by-layer mode of oxide layer even with disordered structure. Coordination number (Z, the number of oxygen atoms around an aluminum atom) of aluminum oxide has been used to identify how the initial oxidation transitions into equilibrated states. Z = 3 is dominant in the early stages of oxidation and at the interface between oxide and bulk substrate, but it transitions quickly to Z = 4 (45%) and 5 (35%) as the oxide equilibrates and approaches its self-limiting thickness. Even though growth kinetics is dependent on the base metal stoichiometry, the composition of the oxide microstructure is not significantly affected, primarily segregating dopant elements, i.e., Ni and Fe outside of the oxide layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrostatic Properties of Polymers Subjected to Atmospheric Pressure Plasma Treatment; Correlation of Experimental Results with Atomistic Modeling

this study, PE, PTFE, PS and PMMA were exposed to a He+O2, APGD and pre and post treatment surface chemistries were analyzed by X-ray photoelectron spectroscopy and contact angle measurements. Semi-empirical and ab-initio calculations were performed to correlate the experimental results with sonic plausible molecular and electronic structure features of the oxidation process. For the PE and PS, significant surface oxidation showing C-O, C=O, and O-C=O bonding, and a decrease in the surface contact angles was observed. For the PTFE and PM MA, little change in the surface composition was observed. The molecular modeling calculations were performed on single and multiple oligomers and showed regardless of oxidation mechanism, e.g. -OH, =O or a combination thereof, experimentally observed levels of surface oxidation were unlikely to lead to a significant change in the electronic structure of PE and PS, and that the increased hydrophilic properties are the primary reason for the observed changes in its electrostatic behavior. Calculations for PTFE and PMMA argue strongly against significant oxidation of those materials, as confirmed by the XPS results.

Trigwell, S.↗

PioABC-Dependent Fe(II) Oxidation during Photoheterotrophic Growth on an Oxidized Carbon Substrate Increases Growth Yield

Microorganisms that carry out Fe(II) oxidation play a major role in biogeochemical cycling of iron in environments with low oxygen. Fe(II) oxidation has been largely studied in the context of autotrophy. Here, we show that the anoxygenic phototroph, Rhodopseudomonas palustris CGA010, carries out Fe(II) oxidation during photoheterotrophic growth with an oxidized carbon source, malate, leading to an increase in cell yield and allowing more carbon to be directed to cell biomass. We probed the regulatory basis for this by transcriptome sequencing (RNA-seq) and found that the expression levels of the known pioABC Fe(II) oxidation genes in R. palustris depended on the redox-sensing two-component system, RegSR, and the oxidation state of the carbon source provided to cells. This provides the first mechanistic demonstration of mixotrophic growth involving reducing power generated from both Fe(II) oxidation and carbon assimilation.

59 BASIC BIOLOGICAL SCIENCES↗

Space Transportatioin System (STS) propellant scavenging system study. Volume 3: Cost and work breakdown structure-dictionary

Fundamentally, the volumes of the oxidizer and fuel propellant scavenged from the orbiter and external tank determine the size and weight of the scavenging system. The optimization of system dimensions and weights is stimulated by the requirement to minimize the use of partial length of the orbiter payload bay. Thus, the cost estimates begin with weights established for the optimum design. Both the design, development, test, and evaluation and theoretical first unit hardware production costs are estimated from parametric cost weight scaling relations for four subsystems. For cryogenic propellants, the widely differing characteristics of the oxidizer and the fuel lead to two separate tank subsystems, in addition to the electrical and instrumentation subsystems. Hardwares costs also involve quantity, as an independent variable, since the number of production scavenging systems is not firm. For storable propellants, since the tankage volume of the oxidizer and fuel are equal, the hardware production costs for developing these systems are lower than for cryogenic propellants.

Source record↗

Unexpected behaviour of one Pb monolayer deposited on aluminum oxide thin film grown on Ag(111)

Using scanning tunneling microscopy (STM), Auger electron spectroscopy, and low energy electron diffraction, we have observed a surprising complete dissolution at room temperature of one lead monolayer deposited by evaporation on an aluminum oxide thin film (∼0.8 nm thick) previously grown on Ag (111). We have observed the quasi-instantaneous diffusion of the lead deposit through the oxide layer to the silver/oxide interface. After the diffusion process, lead atoms form a Moiré superstructure, which is characterized by STM through the oxide layer. This unexpected behavior puts in light the very weak interaction between the aluminum oxide and the silver substrate.

36 MATERIALS SCIENCE↗

Advancing Sodium-Ion Battery Cathodes: A Low-Cost, Eco-Friendly Mechanofusion Route from TiO 2 Coating to Ti 4+ Doping

Layered oxide battery cathodes often require extra stabilization strategies, such as surface coating or doping, to mitigate side reactions and enhance longevity. Conventional methods such as aqueous deposition and atomic layer deposition are costly and environmentally unfriendly and even damage the original structure, especially for air-sensitive sodium-ion battery (SIB) cathodes. Herein, we introduce an all-dry mechanofusion technique that modifies hydroxide precursors with TiO 2 coating before sintering with a sodium source. Using advanced characterizations including X-ray diffraction, neutron diffraction, and solid-state nuclear magnetic resonance for structural insights, X-ray absorption spectroscopy to study metal valence states, and transmission X-ray microscopy for nanoscale visualization of nickel oxidation states, we verified that postsintering transforms TiO 2 surface coating into Ti doping, leading to improved Ni-oxidation homogeneity, modified charge compensation, and enhanced thermal stability. Electrochemical tests reveal superior performance in capacity retention, rate capability, and air stability for these modified cathodes, with pouch cells maintaining over 85% capacity after 650 cycles. This method presents a sustainable, cost-effective route for advanced SIB cathode development.

36 MATERIALS SCIENCE↗

How Noninnocent Spectator Species Improve the Oxygen Reduction Activity of Single-Atom Catalysts: Microkinetic Models from First-Principles Calculations

Graphene-based single-atom catalysts are promising alternatives to platinum-based catalysts for fuel cell applications. Different transition metals have been screened using electronic structure methods by estimating onset potentials from the most endergonic elementary reaction step. Here, we calculate onset potentials for the oxygen reduction reaction on metal atoms embedded in N-substituted graphene di-vacancies by virtue of first-principles-informed microkinetic analysis. We find that for more oxophilic metals (Cr, Fe, Mn, and Ru), purely thermodynamic models systematically underestimate onset potentials. Furthermore, the oxophilic metals (Cr, Fe, Mn, and Ru) are oxidized under reaction conditions, leading to an increase in activity compared to their reduced state. Importantly, coadsorbed O m H n species actively participate in the reaction, which requires a dynamic treatment of spectator species. These findings highlight the limitations of thermodynamic analyses for electrocatalytic processes, which commonly assume the same oxidation state for each metal, and show that deviations between computational and experimental onset potentials cannot be solely attributed to the shortcomings of the electronic structure methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Temperature Fluctuations on Surface Mobility of Atomic Steps and Oxidation Dynamics in High-Temperature Alloys

In contrast to the traditional perspective that thermal fluctuations are insignificant in surface dynamics, here we report their influence on surface reaction dynamics. Using real-time low-energy electron microscopy imaging of NiAl(100) under both vacuum and O 2 atmospheres, we demonstrate that transient temperature variations substantially alter the direction of atom diffusion between the surface and bulk, leading to markedly different oxidation outcomes. During heating, substantial outward diffusion of atoms from the bulk to the surface results in step growth. Conversely, cooling induces considerable inward diffusion of adatoms, producing a distinct oxide morphology. In both scenarios, initially formed oxide islands impede local atomic step mobility, thereby increasing step length due to mass transfer between the surface and bulk, with atomic steps acting as adatom sinks during heating and sources during cooling. Furthermore, we show that this pinning effect on atomic step mobility can be mitigated by applying persistent temperature fluctuations. As a result, understanding these nuances is vital for accurately predicting and dynamically manipulating the performance of active materials in various chemical processes under transient thermal conditions.

36 MATERIALS SCIENCE↗

Biosensor based on Prussian blue nanocubes/reduced graphene oxide nanocomposite for detection of organophosphorus pesticides

We demonstrate a facile procedure to efficiently prepare Prussian blue nanocubes/reduced graphene oxide (PBNCs/rGO) nanocomposite by directly mixing Fe3+ and [Fe(CN)6]3 in the presence of GO in polyethyleneimine aqueous solution, resulting in a novel acetylcholinesterase (AChE) biosensor for detection of organophosphorus pesticides (OPs). The obtained nanocomposite was characterized by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) microanalysis. It was clearly observed that the nanosheet has been decorated with cubic PB nanoparticles and nearly all the nanoparticles are distributed uniformly only on the surface of the reduced GO. No isolated PB nanoparticles were observed, indicating the strong interaction between PB nanocubes and the reduced GO and the formation of PBNCs/rGO nanocomposite. The obtained PBNCs/rGO based AChE biosensor make the peak potential shift negatively to 220 mV. The AChE biosensor shows rapid response and high sensitivity for detection of monocrotophos. These results suggest that the PBNCs/rGO hybrids nanocomposite exhibited high electrocatalytic activity towards the oxidation of thiocholine, which lead to the sensitive detection of OP pesticides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LaCrO3 heteroepitaxy on SrTiO3(001) by molecular beam epitaxy

Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealing.

36 MATERIALS SCIENCE↗

Tuning Methane Activation Chemistry on Alkaline Earth Metal Oxides by Doping

Here, we study oxidative coupling of methane (OCM) on alkaline earth metal oxides (AEMOs) doped with either a transition metal (TM) or an alkaline earth metal (AEM) different from that of the host oxide. We assess whether doping can lead to new materials that are better than the pure oxides or deviate from the limitations of the scaling relations. Density functional theory (DFT) calculations show that doped AEMO surfaces follow similar linear scaling relations as observed on pure AEMO; however, doped surfaces bind the adsorbates, hydrogen, and methyl more strongly. Both TM- and AEM-doped AEMOs show that methane activation mostly occurs through a surface-mediated pathway, where at the transition state the methane C–H bond is stretched, and the methyl interacts mostly with the dopant atom and the hydrogen with the lattice oxygen. The stronger hydrogen binding in the doped surfaces leads to a lower methane activation barrier; however, in some cases, the catalyst surface binds the hydrogen too strongly, poisoning the active site and making the catalyst inactive. The doped systems are largely constrained by the scaling relations, but sites closer to the optimum of the volcano plot exist, suggesting room for improvement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Vacancy Introduction to Increase the Capacity and Voltage Retention in Li‐Excess Cathode Materials

Li‐rich rocksalt oxides are promising cathode materials for lithium‐ion batteries due to their large capacity and energy density, and their ability to use earth‐abundant elements. The excess Li in the rocksalt, needed to achieve good Li transport, reduces the theoretical transition metal redox capacity and introduces a labile oxygen state, both of which lead to increased oxygen oxidation and concomitant capacity loss with cycling. Herein, it is demonstrated that substituting the labile oxygen in Li‐rich cation‐disordered rocksalt materials with a vacancy is an effective strategy to inhibit oxygen oxidation. It is found that the oxygen vacancy in cation‐disordered lithium manganese oxide favors high Li coordination thereby reducing the concentration of unhybridized oxygen states, while increasing the theoretical Mn capacity. It is shown that in the vacancy‐containing compound, synthesized by ball milling, the Mn valence is lowered to less than +3, providing access to more than 300 mAh g −1 capacity from the Mn 2+ /Mn 4+ redox reservoir. The increased transition metal redox and decreased O oxidation are found to improve the capacity and voltage retention, indicating that oxygen vacancy creation to remove the most vulnerable oxygen ions and reduce transition metal valence provides a new opportunity for the design of high‐performance Li‐rich rocksalt cathodes.

25 ENERGY STORAGE↗

Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in Lithium-ion full cells

Continuous operation of full cells with layered transition metal (TM) oxide positive electrodes (NCM523) leads to dissolution of TM ions and their migration and incorporation into the solid electrolyte interphase (SEI) of the graphite-based negative electrode. These processes correlate with cell capacity fade and accelerate markedly as the upper cutoff voltage (UCV) exceeds 4.30 V. At voltages ≥ 4.4 V there is enhanced fracture of the oxide during cycling that creates new surfaces and causes increased solvent oxidation and TM dissolution. Despite this deterioration, cell capacity fade still mainly results from lithium loss in the negative electrode SEI. Among TMs, Mn content in the SEI shows a better correlation with cell capacity loss than Co and Ni contents. As Mn ions become incorporated into the SEI, the kinetics of lithium trapping change from power to linear at the higher UCVs, indicating a large effect of these ions on SEI growth and implicating (electro)catalytic reactions. Lastly, we estimate that each Mn II ion deposited in the SEI causes trapping of ~10 2 additional Li + ions thereby hastening the depletion of cyclable lithium ions. Using these results, we sketch a mechanism for cell capacity fade, emphasizing the conceptual picture over the chemical detail.

25 ENERGY STORAGE↗

Interfacial Electron Transfer Dynamics for [Ru(bpy) 2 ((4,4'-PO 3 H 2 ) 2 bpy)] 2+ Sensitized TiO 2 in a Dye-Sensitized Photoelectrosynthesis Cell: Factors Influencing Efficiency and Dynamics

Nanosecond laser flash photolysis and photocurrent measurements have been used to investigate use of [(Ru(bpy)2(4,4'-(PO3H2)2bpy)]2+ attached to TiO2 nanoparticle films, TiO2-RuII, in a dye-sensitized photoelectrosynthesis cell (DSPEC) configuration for H2 production. In these experiments, laser flash excitation of TiO2-RuII and rapid injection lead to TiO2(e-)-RuIII with subsequent TiO2(e-)-RuIII → TiO2-RuII back electron transfer monitored on the nsec time scale with and without added triethanolamine (TEOA) and deprotonated ethylenediaminetetraacetic tetra-anion (EDTA4-) as irreversible electron transfer donors. With added TEOA or EDTA4-, a competition exists between back electron transfer and scavenger oxidation with the latter leading to H2 production in the photoelectrosynthesis cell. Reduction of TiO2(e-)-RuIII by both TEOA and EDTA4- occurs with kD ~ 106 M-1 s-1. EDTA4- is a more efficient scavenger by a factor of ~3 because of a more favorable partition equilibrium between the film and the external solution. Its increased scavenger efficiency appears in incident photon-to-current conversion efficiency (IPCE) measurements, in electron collection efficiencies (ηcoll), and in photocurrent measurements with H2 production. Evaluation of electron collection efficiencies by transient current measurements gave ηcoll ~ 24% for TEOA and ~ 70% for EDTA4-. The dynamics of back electron transfer are minimized, and collection efficiencies, photocurrents, and hydrogen production are maximized by application of a positive applied bias consistent with the results of I-V measurements. A pH dependent plateau is reached at ~0 V at pH = 4.5 (EDTA4-) and at ~ -0.4 V at pH 6.7 (TEOA). The difference is qualitatively consistent with the influence of pH on electron population in trap states below the conduction band and the role they play in back electron transfer. The excitation dependence of IPCE measurements matches the spectrum of TiO2-RuII with IPCE values ~3 times higher for EDTA4- than for TEOA as noted above. Absorbed photon-to-current efficiency (APCE) values are light-intensity dependent because of the effect of multiple injection events and the influence of increasing trap site electron densities on back electron transfer. The key to efficient H2 production is minimizing back electron transfer. Application of a sufficiently positive potential relative to ECB for TiO2 accelerates loss of electrons from the film in competition with back electron transfer allowing for H2 production with efficiencies approaching 14.7% under steady-state irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-Time Investigation of Sn(II) Oxidation in Pb-Free Halide Perovskites by X-ray Absorption and Mössbauer Spectroscopy

Sn(II) halide perovskites are a less toxic alternative to Pb-based materials in perovskite solar cells, but oxidation to Sn(IV) introduces additional degradation pathways. Improving stability requires mechanistic pictures of O 2 - and H 2 O-induced degradation and their synergy. In this work, we demonstrate that X-ray absorption spectroscopy reports the average valency of the bulk material, allowing oxidation kinetics to be measured from minutes to days. Optical and X-ray diffraction studies demonstrate the challenge of isolating oxidative degradation with techniques lacking element specificity and oxidation state sensitivity. Finally, 119Sn Mössbauer spectroscopy is presented as a lab-based technique capable of providing information on valency and speciation throughout oxidation.

14 SOLAR ENERGY↗

CaSn(OH){sub 6} hydroxides, CaSnO{sub 3} oxides and CaSnF{sub 6} fluorides: Synthesis and structural filiation. Cationic environment impact on Pr{sup 3+} doped compounds luminescence

Highlights: • Structural filiation of stannates compounds. • {sup 119}Sn Mossbauer analysis of Sn-X chemical bonding (X = OH, O, F). • Nephelauxetic effect observed in the luminescence of Pr{sup 3+} doped stannate compounds. - Abstract: CaSn(OH){sub 6}, CaSnO{sub 3} and CaSnF{sub 6} compounds were elaborated from a “one-batch” synthesis route: the coprecipitation of the pure double hydroxide leads to pure double oxide or fluoride after annealing treatments under air or HF as anhydrous gas, respectively. Structural and morphological features of the three matrices were carefully investigated by X Ray Diffraction analysis and Scanning Electron Microscopy, respectively. In addition, the luminescent properties of the Pr-doped compounds were performed and compared. The nanometric size of the double hydroxide inhibits the luminescence. The interpretation of the emission spectra obtained for Pr-doped CaSnO{sub 3} and CaSnF{sub 6} compounds is based on the covalence/ionic balance of the M–O or M–F bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Raman Study of Nickel Oxide and Gold-Supported Nickel Oxide Catalysts for the Electrochemical Evolution of Oxygen

An in situ Raman spectroscopic investigation has been carried out to identify the composition of the active phase present on the surface of nickel electrodes used for the electrochemical evolution of oxygen. The electrolyte in all cases was 0.1 M KOH. A freshly polished Ni electrode oxidized upon immersion in the electrolyte and at potentials approaching the evolution of oxygen developed a layer of γ-NiOOH. Electrochemical cycling of this film transformed it into β-NiOOH, which was observed to be three times more active than γ-NiOOH. The higher activity of β-NiOOH is attributed to an unidentified Ni oxide formed at a potential above 0.52 V (vs Hg/HgO reference). We have also observed that a submonolayer of Ni oxide deposited on Au exhibits a turnover frequency (TOF) for oxygen evolution that is an order of magnitude higher than that for a freshly prepared γ-NiOOH surface and more than 2-fold higher than that for a β-NiOOH surface. By contrast, a similar film deposited on Pd exhibits a TOF that is similar to that of bulk γ-NiOOH. Furthermore it is proposed that the high activity of submonolayer deposits of Ni oxide on Au is due to charge transfer from the oxide to the highly electronegative Au, leading to the possible formation of a mixed Ni/Au surface oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗