SEARCH · Search NASA

Results for “LEADING ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2015

Structural and electrical properties of Si- and Ti-doped Cu{sub 2}SnSe{sub 3} bulks

Silicon-doped (Cu{sub 2}(Sn{sub 1−x}Si{sub x})Se{sub 3} and titanium-doped (Cu{sub 2}(Sn{sub 1−x}Ti{sub x})Se{sub 3} at x=0, 0.05, 0.1, 0.15, and 0.2 were prepared at 550 °C for 2 h with soluble sintering aids of volatile Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Si-doped and Ti-doped Cu{sub 2}SnSe{sub 3} (CTSe) as a function of dopant concentration. Si-doped CTSe pellets show p-type at x=0 and 0.05 and n-type at x=0.1, 0.15, and 0.2, whereas Ti-doped CTSe pellets show p-type at x=0, 0.05 and 0.1 and n-type at x=0.15 and 0.2. The lowest hole concentration of 3.6×10{sup 17} cm{sup −3} and the highest mobility of 1525 cm{sup 2} V{sup −1} s{sup −1} were obtained for the Si-doped (Cu{sub 2}(Sn{sub 1−x}Si{sub x})Se{sub 3} bulks at x=0.1 (10% Si), while they were 3.1×10{sup 17} cm{sup −3} and 813 cm{sup 2} V{sup −1} s{sup −1} for the Ti-doped CTSe bulks at x=0.15 (15% Ti), as compared to 1.1×10{sup 18} cm{sup −3} and 209 cm{sup 2} V{sup −1} s{sup −1} for undoped one. The explanations based upon antisite defects of Si-to-Sn, Ti-to-Sn, Cu-to-Sn, and Sn-to-Cu for the changes in electrical property were declared. The study in bulk Si-doped and Ti-doped CTSe is based upon defect state and is consistent and supported by the data of electrical property and lattice parameter. - Graphical abstract: Cu{sub 2}SnSe{sub 3} (CTSe) semiconductor is interesting because of its adjustable electrical properties by extrinsic doping. Si and Ti doping in CTSe leads to high carrier mobility above 800 cm{sup 2} V{sup −1} s{sup −1}. - Highlights: • Cu{sub 2}SnSe{sub 3} (CTSe) is an interesting semiconductor because of its adjustable electrical properties. • Cu(In,Ga)Se{sub 2}, on the contrary, is difficult to change its electrical properties. • Si and Ti doping can change p-CTSe to n-CTSe. • The lowest electron concentration in doped CTSe had the highest mobility above 800 cm{sup 2} V{sup −1} s{sup −1}. • The defects of Si-to-Sn, Ti-to-Sn, Cu-to-Sn, and Sn-to-Cu in Si- and Ti-doped CTSe were proposed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Probing the antiknock effect of anisole through an ignition, speciation and modeling study of its blends with isooctane

In order to unravel the reaction pathways relevant to anisole co-oxidation within a fuel blend, a detailed study of isooctane/anisole blends was performed with the ULille RCM. Ignition delays as well as mole fraction profiles were measured during a two-stage ignition delay using sampling and GC techniques. These results are used to validate a kinetic model developed from ab initio calculations for the most relevant rate constants which included H-atom abstraction reactions from anisole, and reactions on the potential energy surfaces of methoxyphenyl + O 2 and anisyl + O 2 . Pressure dependent rate constants were computed for the methoxyphenyl + O 2 and anisyl + O 2 reactive systems using master equation code analysis. The new kinetic model shows good agreement with the experimental data. Dual brute-force sensitivity analysis was performed, on both first- and second-stages of ignition, allowing the identification of the most important reactions in the prediction of both ignition delays. It was observed that while pure anisole does not show NTC behavior, a 60/40 isooctane/anisole blend displays such behavior, as well as two-stage ignition. This suggests anisole addition may not be as beneficial to knock resistance as expected from its high octane number. The kinetic modeling results demonstrate the importance of H-abstraction reactions both from the methoxy group and from the aryl ring in ortho-position and the addition of the resultant radicals to O2, mostly leading to the formation of polar or non-aromatic products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2017

A framework for evaluating the accessibility of raw materials from end-of-life products and the Earth’s crust

Highlights: • Defined and conceptualised raw material accessibility. • Applied concept extraction in raw material management. • Developed a framework for evaluating raw material accessibility. •Carried out an evaluation with End-of-Life products and natural deposits. • Developed an early project stage evaluation for accessing raw materials. - Abstract: An increasing number of geochemically scarce metallic raw materials are entering into our lives via new technologies. A reversal of this trend is not foreseeable, leading to concerns regarding the security of their supply. However, the evaluation of raw material supply is currently hampered by inconsistent use of fundamental terminologies and incomplete assessment criteria. In this paper, we aim to establish a consistent framework for evaluating raw material supply from both anthropogenic and geological sources. A method for concept extraction was applied to evaluate systematically the use of fundamental terms in the evaluation of raw material supply. The results have shown that ‘availability’ is commonly used in raw material supply evaluations, whilst other researchers suggest that raw material supply should be evaluated based on ‘accessibility’. It was revealed that ‘accessibility’ actually comprises two aspects: ‘availability’ and ‘approachability’. Raw material ‘approachability’ has not previously been explicitly addressed at a system level. A novel, consistent framework for evaluating raw material supply was therefore developed. To demonstrate the application of the established framework, we evaluated the raw material supply of four rare earth element case studies. Three case studies are End-of-Life products (the anthroposphere) from Switzerland: (i) phosphors in fluorescent lamps, (i) permanent magnets in the drive motors of electric cars and (iii) fibre optic cable. The fourth case study source is the Earth’s crust (the geosphere): Mount Weld deposit in Australia. The framework comprises a comprehensive evaluation of six components relating to raw material mining and processing: their geological knowledge, eligibility, technology, economic, societal and environmental impacts. Our results show that metals are not considered to be fully accessible in any of the case studies due to a lack of necessary technologies and potential societal and environmental impacts. The framework presented here can serve as a starting point for the development of an evaluation framework for raw material accessibility at an early project development stage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Topologically distinct Weyl fermion pairs

Abstract A Weyl semimetal has Weyl nodes that always come in pairs with opposite chiralities. Notably, different ways of connection between nodes are possible and would lead to distinct topologies. Here we identify their differences in many respects from two proposed models with different vorticities. One prominent feature is the behaviour of zeroth Landau levels (LLs) under magnetic field. We demonstrate that the magnetic tunneling does not always expel LLs from zero energy because the number of zero-energy modes is protected by the vorticity of the Weyl nodes, instead of the chirality. Other respects in disorder effects for weak (anti-)localization, surface Fermi arcs, and Weyl-node annihilation, are interesting consequences that await more investigation in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

DeepAstroUDA: semi-supervised universal domain adaptation for cross-survey galaxy morphology classification and anomaly detection

Abstract Artificial intelligence methods show great promise in increasing the quality and speed of work with large astronomical datasets, but the high complexity of these methods leads to the extraction of dataset-specific, non-robust features. Therefore, such methods do not generalize well across multiple datasets. We present a universal domain adaptation method, DeepAstroUDA , as an approach to overcome this challenge. This algorithm performs semi-supervised domain adaptation (DA) and can be applied to datasets with different data distributions and class overlaps. Non-overlapping classes can be present in any of the two datasets (the labeled source domain, or the unlabeled target domain), and the method can even be used in the presence of unknown classes. We apply our method to three examples of galaxy morphology classification tasks of different complexities (three-class and ten-class problems), with anomaly detection: (1) datasets created after different numbers of observing years from a single survey (Legacy Survey of Space and Time mock data of one and ten years of observations); (2) data from different surveys (Sloan Digital Sky Survey (SDSS) and DECaLS); and (3) data from observing fields with different depths within one survey (wide field and Stripe 82 deep field of SDSS). For the first time, we demonstrate the successful use of DA between very discrepant observational datasets. DeepAstroUDA is capable of bridging the gap between two astronomical surveys, increasing classification accuracy in both domains (up to 40 % on the unlabeled data), and making model performance consistent across datasets. Furthermore, our method also performs well as an anomaly detection algorithm and successfully clusters unknown class samples even in the unlabeled target dataset.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Roots selectively decompose litter to mine nitrogen and build new soil carbon

Abstract Plant–microbe interactions in the rhizosphere shape carbon and nitrogen cycling in soil organic matter (SOM). However, there is conflicting evidence on whether these interactions lead to a net loss or increase of SOM. In part, this conflict is driven by uncertainty in how living roots and microbes alter SOM formation or loss in the field. To address these uncertainties, we traced the fate of isotopically labelled litter into SOM using root and fungal ingrowth cores incubated in a Miscanthus x giganteus field. Roots stimulated litter decomposition, but balanced this loss by transferring carbon into aggregate associated SOM. Further, roots selectively mobilized nitrogen from litter without additional carbon release. Overall, our findings suggest that roots mine litter nitrogen and protect soil carbon.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2016

“Ba{sub 6}Nb{sub 4}RuO{sub 18}” and “LaBa{sub 4}Nb{sub 3}RuO{sub 15}” – The structural consequences of substituting paramagnetic cations into A{sub n}B{sub n−1}O{sub 3n} cation-deficient perovskite oxides

The B-cation deficient perovskite phases Ba{sub 6}Nb{sub 4}RuO{sub 18} and LaBa{sub 4}Nb{sub 3}RuO{sub 15} were prepared by ceramic synthesis. Neutron powder diffraction analysis indicates that rather than the 6-layer and 5-layer cation-deficient perovskite structures expected for these phases (by analogy to the known structures of Ba{sub 6}Nb{sub 4}TiO{sub 18} and LaBa{sub 4}Nb{sub 3}TiO{sub 15}) they adopt 5-layer and 4-layer B-cation deficient perovskite structures respectively, and are better described as Ba{sub 5}Nb{sub 3.33}Ru{sub 0.81}O{sub 15} and Ba{sub 3.16}La{sub 0.84}Nb{sub 2.36}Ru{sub 0.72}O{sub 12}. The factors that lead to the compositionally analogous Nb/Ru and Nb/Ti phases adopting different structures are discussed on the basis of the difference between d{sup 0} and non-d{sup 0} transition metal cations. - Graphical abstract: The ruthenium-containing B-cation deficient perovskite phases, Ba{sub 5}Nb{sub 3.33}Ru{sub 0.81}O{sub 15} and Ba{sub 3.16}La{sub 0.84}Nb{sub 2.36}Ru{sub 0.72}O{sub 12}, adopt 5-layer and 4-layer structures respectively, rather than the 6-layer and 5-layer cation-deficient structures adopted by the analogous titanium-containing phases Ba{sub 6}Nb{sub 4}TiO{sub 18} and LaBa{sub 4}Nb{sub 3}TiO{sub 15}. Display Omitted - Highlights: • B-cation deficient perovskite containing paramagnetic cations. • B-cation deficient structure determined by neutron powder diffraction. • Low ‘solubility’ of BaRuO{sub 3} in Ba{sub 5}Nb{sub 4}O{sub 15} leads to novel structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Two-center three-electron bonding in ClNH{sub 3} revealed via helium droplet infrared laser Stark spectroscopy: Entrance channel complex along the Cl + NH{sub 3} → ClNH{sub 2} + H reaction

Pyrolytic dissociation of Cl{sub 2} is employed to dope helium droplets with single Cl atoms. Sequential addition of NH{sub 3} to Cl-doped droplets leads to the formation of a complex residing in the entry valley to the substitution reaction Cl + NH{sub 3} → ClNH{sub 2} + H. Infrared Stark spectroscopy in the NH stretching region reveals symmetric and antisymmetric vibrations of a C{sub 3v} symmetric top. Frequency shifts from NH{sub 3} and dipole moment measurements are consistent with a ClNH{sub 3} complex containing a relatively strong two-center three-electron (2c–3e) bond. The nature of the 2c–3e bonding in ClNH{sub 3} is explored computationally and found to be consistent with the complexation-induced blue shifts observed experimentally. Computations of interconversion pathways reveal nearly barrierless routes to the formation of this complex, consistent with the absence in experimental spectra of two other complexes, NH{sub 3}Cl and Cl–HNH{sub 2}, which are predicted in the entry valley to the hydrogen abstraction reaction Cl + NH{sub 3} → HCl + NH{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

CoTe 2 : A Quantum Critical Dirac Metal with Strong Spin Fluctuations

Abstract Quantum critical points separating weak ferromagnetic and paramagnetic phases trigger many novel phenomena. Dynamical spin fluctuations not only suppress the long‐range order, but can also lead to unusual transport and even superconductivity. Combining quantum criticality with topological electronic properties presents a rare and unique opportunity. Here, by means of ab initio calculations and magnetic, thermal, and transport measurements, it is shown that the orthorhombic CoTe 2 is close to ferromagnetism, which appears suppressed by spin fluctuations. Calculations and transport measurements reveal nodal Dirac lines, making it a rare combination of proximity to quantum criticality and Dirac topology.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Thermal Conductivity of BAs under Pressure

Abstract The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three‐ and four‐phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time‐domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of BAs's thermal conductivity shows the important relationship between phonon dispersion properties and three‐ and four‐phonon scattering rates.

36 MATERIALS SCIENCE↗

DOE OSTI2015

Cyclic (Amino)(aryl)carbenes (CAArCs) as Strong σ‐Donating and π‐Accepting Ligands for Transition Metals

Abstract Cyclic (amino)(aryl)carbenes (CAArCs) result from the replacement of the alkyl substituent of cyclic (alkyl)(amino) carbenes (CAACs) by an aryl group. This structural modification leads to enhanced electrophilicity of the carbene center with retention of the high nucleophilicity of CAACs, and therefore CAArCs feature a small singlet–triplet gap. The isoindolium precursors are readily prepared in good yields, and deprotonation at low temperature, in the presence of [RhCl(cod)] 2 and [(Me 2 S)AuCl] lead to air‐stable rhodium and gold CAArC‐supported complexes, respectively. The rhodium complexes promote the [3+2] cycloaddition of diphenylcyclopropenone with ethyl phenylpropiolate, and induce the addition of 2‐vinylpyridine to alkenes by CH activation. The gold complexes allow for the catalytic three‐component preparation of 1,2‐dihydroquinolines from aniline and phenyl acetylene. These preliminary results illustrate the potential of CAArC ligands in transition‐metal catalysis.

Rao, Bin↗

DOE OSTI2015

Cyclic (Amino)(aryl)carbenes (CAArCs) as Strong σ‐Donating and π‐Accepting Ligands for Transition Metals

Rao, Bin↗

DOE OSTI2024

Molecular Evolution of the H5 and H7 Highly Pathogenic Avian Influenza Virus Haemagglutinin Cleavage Site Motif

ABSTRACT Avian influenza viruses are ubiquitous in the Anatinae subfamily of aquatic birds and occasionally spill over to poultry. Infection with low pathogenicity avian influenza viruses generally leads to subclinical or mild clinical disease. In contrast, highly pathogenic avian influenza viruses emerge from low pathogenic forms and can cause severe disease associated with extraordinarily high mortality rates. Here, we describe the natural history of avian influenza virus, with a focus on H5Nx and H7Nx subtypes, and the emergence of highly pathogenic forms; we review the biology of AIV; we examine cleavage of haemagglutinin by host cell enzymes with a particular emphasis on the biochemical properties of the proprotein convertases, and trypsin and trypsin‐like proteases; we describe mechanisms implicated in the functional evolution of the haemagglutinin cleavage site motif that leads to emergence of HPAIVs; and finally, we discuss the diversity of H5 and H7 haemagglutinin cleavage site sequence motifs. It is crucial to understand the molecular attributes that drive the emergence and evolution of HPAIVs with pandemic potential to inform risk assessments and mitigate the threat of HPAIVs to poultry and human populations.

Luczo, Jasmina M. [Australian Animal Health Labora↗

DOE OSTI2019

A Pattern Recognition Algorithm for Quantum Annealers

Abstract The reconstruction of charged particles will be a key computing challenge for the high-luminosity Large Hadron Collider (HL-LHC) where increased data rates lead to a large increase in running time for current pattern recognition algorithms. An alternative approach explored here expresses pattern recognition as a quadratic unconstrained binary optimization (QUBO), which allows algorithms to be run on classical and quantum annealers. While the overall timing of the proposed approach and its scaling has still to be measured and studied, we demonstrate that, in terms of efficiency and purity, the same physics performance of the LHC tracking algorithms can be achieved. More research will be needed to achieve comparable performance in HL-LHC conditions, as increasing track density decreases the purity of the QUBO track segment classifier.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2015

One-pot synthesis of hierarchical Cu{sub 2}O/Cu hollow microspheres with enhanced visible-light photocatalytic activity

The hierarchical Cu{sub 2}O/Cu hollow microspheres have been fabricated by the one-pot solvothermal redox method, which is one-step approach without any surfactant and template. By using the HRTEM, XRD, XPS and UV–vis spectroscopy, the as-prepared product is composed of Cu{sub 2}O and Cu with energy band gap of 1.72 eV. Based on the time-dependent experiments, the content of Cu{sub 2}O and Cu compositions can be effectively controlled by adjusting the reaction time and a possible mechanism is proposed. In addition, using various dye molecules to stimulate pollutants, the hierarchical Cu{sub 2}O/Cu hollow microspheres reacted for 8 h exhibit excellent visible-light photocatalytic activities, which is much higher than those of the Cu{sub 2}O/Cu catalysts formed at the shorter reaction time, commercial Cu{sub 2}O powder and the mixture of alone Cu{sub 2}O and Cu. This enhanced photocatalytic performance makes these hierarchical Cu{sub 2}O/Cu hollow microspheres a kind of efficient visible-light photocatalyst in removing some organic compounds in wastewater. - Graphical abstract: The hierarchical Cu{sub 2}O/Cu hollow microspheres with adjustable components have been synthesized by one-step solvothermal redox approach. The special structures and composition lead to the excellent visible-light photocatalytic activity. - Highlights: • The hierarchical Cu{sub 2}O/Cu hollow microspheres are fabricated by one-step approach. • The content of Cu{sub 2}O and Cu can be controlled by adjusting the reaction time. • The material exhibits a better visible-light photocatalytic activity and stability. • Degradation kinetics of MO by Cu{sub 2}O/Cu fits the pseudo first-order model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Investigation into the effect on structure of oxoanion doping in Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O

In this paper an investigation into the effect of transition metal ion and selenate/fluorophosphate doping on the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O (M=transition metal) materials is reported. In agreement with previous reports, the monoclinic (Kröhnkite) structure is adopted for M=Mn, Fe, Co, Cu, while for the smallest first row divalent transition metal ion, M=Ni, the triclinic (Fairfieldite structure) is adopted. On selenate doping there is a changeover in structure from monoclinic to triclinic for M=Fe, Co, Cu, with the larger Fe{sup 2+} system requiring the highest level of selenate to complete the changeover. Thus the results suggest that the relative stability of the two structure types is influenced by the relative size of the transition metal: oxoanion group, with the triclinic structure favoured for small transition metals/large oxoanions. The successful synthesis of fluorophosphate doped samples, Na{sub 2}M(SO{sub 4}){sub 2−x}(PO{sub 3}F){sub x}·2H{sub 2}O was also obtained for M=Fe, Co, Cu, with the results showing a changeover in structure from monoclinic to triclinic for M=Co, Cu for very low levels (x=0.1) of fluorophosphate. In the case of M=Fe, the successful synthesis of fluorophosphates samples was achieved for x≤0.3, although no change in cell symmetry was observed. Rather in this particular case, the X-ray diffraction patterns showed evidence for selective peak broadening, attributed to local disorder as a result of the fluorophosphate group disrupting the H-bonding network. Overall the work highlights how isovalent doping can be exploited to alter the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O systems. - Graphical abstract: Partial substitution of sulfate in Na{sub 2}M(SO{sub 4}){sub 2}0.2H{sub 2}O (M=Co, Cu) by selenate or fluorophosphate leads to a structural change from the monoclinic Kröhnkite to the triclinic Fairfieldite structure. - Highlights: • The successful synthesis of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O (M=transition metal) phases doped with selenate and fluorophosphate. • A change in structure is observed on selenate doping for M=Fe, Co, Cu. • This change in structure is also observed on fluorophosphate doping for M=Co, Cu. • The work highlights how isovalent doping can be exploited to alter the structures of Na{sub 2}M(SO{sub 4}){sub 2}·2H{sub 2}O systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2018

Deformation and fracture characteristics of Al6092/SiC/17.5p metal matrix composite sheets due to heat treatments

Highlights: • Al{sub 2}Cu, Al{sub 4}Cu{sub 2}Mg{sub 8}Si{sub 7} and MgAl{sub 2} precipitations are formed between Al-matrix and SiC particle interface after T6-treatement • O-condition annealing decrease Al{sub 2}Cu intermetallic compound and increase elongation to fracture • 6092Al/SiCp composite at O-condition annealing is more sensitive to strain rate than the one heat treated by T6-treatment • Dimple density in the fracture surface of Al/SiCp composite varies as a function of heat treatment and strain rate - Abstract: In metal matrix composite (MMC) materials, the reaction between the metal matrix and reinforcement particles could change the composition of the matrix and the interface and lead to interfacial compounds. These intermetallic compounds may have either a deleterious effect to the mechanical properties or beneficial effect in enhancing the toughness and ductility of the composite. An aluminium 6092 alloy with 17.5% volume fraction silicon carbide (SiC) particles sheet manufactured by means of powder metallurgical method, heat treated to T6 condition, is used to obtain a fundamental understanding of the heat treatment effect on the fracture mechanism, the microstructural changes and the interface between the Al-matrix and SiC particles. Changes in the microstructure of the Al/SiCp and the topography of the fracture are investigated using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM) to characterize the precipitate and intermetallic compounds formed at the Al/Sic interface. X-ray diffraction (XRD) is utilized to characterize the phase formation and to give confidence in the results of TEM and EDS. Tensile tests with different strain rates (8 × 10{sup −5}, 8 × 10{sup −4}, 8 × 10{sup −3}, 8 × 10{sup −2} and 0.16 s{sup −1}) were carried out to study the toughness and to find a correlation between the strain rate and heat treatment. Under T6 condition, the results show that the mechanical property of this MMC is less ductile due to the formation of precipitations as a result of either the interaction between the Al and SiCp or from hardening precipitation treatment, e.g. Al{sub 2}Cu, Al{sub 4}Cu{sub 2}Mg{sub 8}Si{sub 7} and MgAl{sub 2}. O-condition annealing can reduce the detrimental effect of the intermetallic compounds in the interface region and improve the toughness and ductility of the material by decreasing the intermetallic compound (Al{sub 2}Cu). However, the Al/SiC sheet treated with O-condition annealing is more sensitive to the strain rate than the one treated with T6.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Characterization of martensite-austenite constituents and micro-hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel

Highlights: • The influence of cold wire addition to the tandem submerged arc welding process on the ICRCGHAZ is investigated. • Comprehensive characterization of the microstructure and micro-hardness in the ICRCGHAZ of a HSLA steel is performed. • A lower fraction of finely distributed M-A formed in the ICRCGHAZ of TSAW + cold wire steel, leading to lower micro-hardness. • The aspect ratio and inter-particle spacing of M-A constituents decreased in the ICRCGHAZ through cold wire addition. - Abstract: The thermal cycles that high strength low alloy (HSLA) low carbon steels experience during welding inevitably affect the microstructure and mechanical properties of the weld joints. It is generally agreed that the coarse-grained heat affected zone (CGHAZ) and the intercritical reheated coarse-grained heat affected zone (ICRCGHAZ) in one-pass and multi-pass welding, respectively, have the poorest microstructure and mechanical properties relative to the rest of the steel joint. The martensite-austenite (M-A) constituents formed in the HAZ regions predominantly govern property deterioration in the CGHAZ and the ICRCGHAZ by promoting the initiation and propagation of micro-cracks. However, the characteristics of the M-A constituents, i.e., fraction, size, shape and aspect ratio, are strongly affected by the welding heat input. Accordingly, in this study, the aim was to evaluate the influence of a cold wire addition in conventional tandem submerged arc welding (TSAW + cold-wire) on the microstructure and micro-hardness in the CGHAZ and ICRCGHAZ. Microstructural characterization showed that a lower fraction of finely distributed M-A constituents associated with smaller prior austenite grains (PAGs) formed in the CGHAZ of the steel welded by the TSAW + cold-wire process (CW-OD weld) relative to that welded by the conventional TSAW process (TW-OD weld). Furthermore, the fraction of M-A constituents in the ICRCGHAZ of the CW-OD weld was decreased. A higher fraction of slender shaped M-A constituents in the ICRCGHAZ of the TW-OD weld resulted in an increase in the micro-hardness. The microstructure and micro-hardness changes associated with cold wire addition were attributed to the lower welding heat input and, consequently, the faster cooling rate with a corresponding reduction in the retention time in the austenitic region and ferrite/austenite region in the CGHAZ and ICRCGHAZ regions, respectively.

36 MATERIALS SCIENCE↗