Search NASA⌕ Search

SEARCH · Search NASA

Results for “LHC experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Test of lepton flavor universality in semileptonic 𝐵$^+_𝑐$ meson decays in proton-proton collisions at $\sqrt{𝑠}$ = 13 TeV

A measurement of the ratio of branching fractions 𝑅⁢(𝐽/𝜓) =ℬ⁡(𝐵$^+_𝑐$ →𝐽/𝜓⁢𝜏 + ⁢𝜈 𝜏 )/ℬ⁡(𝐵$^+_𝑐$ →𝐽/𝜓⁢𝜇 + ⁢𝜈 𝜇 ) in the 𝐽/𝜓 →𝜇 + ⁢𝜇 − , 𝜏 + →𝜇 + ⁢𝜈 𝜇 ⁢$\bar{𝜈}$ 𝜏 decay channel is presented. This measurement uses a sample of proton-proton collision data collected at a center-of-mass energy of 13 TeV by the CMS experiment in 2018, corresponding to an integrated luminosity of 59.7 fb −1 . The measured ratio, 𝑅⁢(𝐽/𝜓) = 0.1⁢7$^{+0.18}_{−0.17}⁢$(stat)$^{+0.21}_{−0.22⁢}$(syst)$^{+0.19}_{−0.18}$⁢(theo) =0.17 ± 0.33, agrees with the value of 0.2582 ± 0.0038 predicted by the standard model, which assumes lepton flavor universality. By testing lepton flavor universality, this measurement is a probe of new physics using 𝐵$^+_𝑐$ mesons, which are currently only produced at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct-photon production in inelastic and high-multiplicity proton–proton collisions at $\sqrt{s}$ = 13 TeV

In this letter, we present the first measurement of direct photons at the transverse momentum of 1 < 𝑝 T < 6 GeV/𝑐 at midrapidity 𝜂 < 0.8 in inelastic and high-multiplicity proton–proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV. The fraction of virtual direct photons in the inclusive virtual photon spectrum is obtained from a fit to the dielectron invariant mass spectrum. In the limit of zero invariant mass, this fraction is equal to the relative contribution of real direct photons in the inclusive real photon spectrum. Contributions from decays of light- flavour neutral mesons are estimated using independent measurements in proton–proton collisions at the same energy and the same event class. For the first time at the LHC energies, a direct-photon signal is observed at low 𝑝T in both inelastic and high-multiplicity event classes, with a significance of 3.2𝜎 and 1.9𝜎 in terms of standard deviations, correspondingly. The yield of direct photons in inelastic pp collisions is compared to perturbative QCD calculations. The integrated photon yield is studied as a function of charged-particle multiplicity and is compared to the results from other experiments and theoretical calculations. The results show a significant increase of direct- photon yield with charged-particle multiplicity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cryogenic Testing of HL-LHC Q1/Q3 Cryo-Assemblies at Fermilab

Fermilab is conducting horizontal cryogenic testing of Q1/Q3 Cryo-Assemblies for the high-luminosity LHC upgrade (HL-LHC). Cryo-Assemblies are installed on the upgraded Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles. The cryogenic process requirements of these tests include controlled cool-down and warm-up with a 100 K maximum temperature differential between the two ends of the cold mass, operation of a 1.3 bar, 1.9 K bath of subcooled superfluid helium during power testing and magnetic measurements, and operation at pressures up to 18 bar with full helium recovery after a quench. This paper presents the operational experience gained from the first tests as well as improvements for subsequent tests.

Rabehl, R. [Fermilab]↗

Cryogenic testing of the first HL-LHC Q1/Q3 cryo-assembly at Fermilab

In early 2023, Fermilab is conducting horizontal cryogenic testing of the first Q1/Q3 cryo-assembly for the high-luminosity LHC upgrade (HL-LHC). The cryo-assembly was installed on the upgraded Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles. The cryogenic process requirements of this test include controlled cool-down and warm-up with a 100 K maximum temperature differential between the two ends of the cold mass, operation of a 1.3 bar, 1.9 K bath of subcooled superfluid helium during power testing and magnetic measurements, and operation at pressure up to 18 bar with full helium recovery after a quench. This paper presents the operational experience gained from this first test.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cryogenic testing of HL-LHC Q1/Q3 cryo-assemblies at Fermilab

Fermilab is conducting horizontal cryogenic testing of Q1/Q3 cryo-assemblies for the high-luminosity LHC upgrade (HL-LHC). Cryo-assemblies are installed on the upgraded Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles. The cryogenic process requirements of these tests include controlled cool-down and warm-up with a 100 K maximum temperature differential between the two ends of the cold mass, operation of a 1.3 bar, 1.9 K bath of subcooled superfluid helium during power testing and magnetic measurements, and operation at pressure up to 18 bar with full helium recovery after a quench. This paper presents the operational experience gained from the first tests as well as improvement for subsequent tests.

Rabehl, R. [Fermilab] (ORCID:0000000311130030)↗

Investigation of an octupole breathing mode of 208 Pb as a resolution to the elliptical-to-triangular azimuthal anisotropy puzzle in ultracentral relativistic heavy ion collisions

Relativistic heavy ion collisions provide a unique opportunity to probe the nuclear structure by taking an instantaneous snapshot of the colliding nuclei and converting it into momentum anisotropies of final emitted hadrons. A long-standing puzzle of too large a ratio of the elliptical-to-triangular (𝑣 2 -to-𝑣 3 ) anisotropies in ultracentral 208 Pb + 208 Pb collisions at the Large Hadron Collider (LHC) cannot be solved simply by hydrodynamic simulations with initial conditions containing the spherical or certain deformed shape of 208 Pb. Here, in this Letter, using the iEBE-VISHNU relativistic viscous hydrodynamic hybrid model simulations with the TR⁢ENTo initial condition, we show that a dynamic octupole deformation—a shape-breathing mode of 208 Pb —could potentially solve the 𝑣2-to-𝑣3 puzzle and simultaneously describe the 𝑣 3 ⁡{4} data measured in experiment. Our results highlight the unique capability of capturing transient collective properties of nuclei on yoctosecond (10 −24 s) timescales, unfeasible with low-energy nuclear reactions.

Xu, Hao-jie [Huzhou University, Zhejiang (China)] ↗

Supersymmetric gauged $ \mathrm{U}{(1)}_{L_{\mu }-{L}_{\tau }} $ model for electron and muon (g - 2) anomaly

Minimal gauged U 1 L μ - L τ models can provide for an additional source for the muon anomalous magnetic moment however it is difficult to accommodate the discrepancy in the electron magnetic moment in tandem. Owing to the relative sign between the discrepancies in these quantities, it seems unlikely that they arise from the same source. We show that a supersymmetric (SUSY) gauged U 1 L μ - L τ model can accommodate both the muon and electron anomalous magnetic moments in a very simple and intuitive scenario, without utilizing lepton flavor violation. The currently allowed parameter space in this kind of a scenario is constrained from the latest LHC and various low energy experimental data,e.g., recent COHERENT data, CCFR, Borexino, BaBaR, supernova etc. These constraints, in conjunction with the requirement to explain both lepton magnetic moments, lead to an upper bound on the first generation slepton mass, a lower bound on the second generation slepton mass and constricts the allowed range for the new gauge boson mass and coupling. The scheme can be probed at the ongoing COHERENT and Coherent CAPTAIN-Mills experiments and at future experiments, e.g., DUNE, BELLE-II etc.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of an MCP-Based Timing Layer for the LHCb ECAL Upgrade-2

The increase in instantaneous luminosity during the high-luminosity phase of the LHC represents a significant challenge for future detectors. A strategy to cope with high-pileup conditions is to add a fourth dimension to the measurements of the hits, by exploiting the time separation of the various proton–proton primary collisions. According to LHCb simulation studies, resolutions of about 10–20 picoseconds, at least an order of magnitude shorter than the average time span between primary interactions, would be greatly beneficial for the physics reach of the experiment. Microchannel plate (MCP) photomultipliers are compact devices capable of measuring the arrival time of charged particles with the required resolution. The technology of large-area picosecond photodetectors (LAPPDs) is under investigation to implement a timing layer that can be placed within a sampling calorimeter module with the purpose of measuring the arrival time of electromagnetic showers. LAPPD performances, using a Gen-I tile with a delay-line anode and a Gen-II with a capacitively coupled anode, have been measured thoroughly both with laser (wavelength of 405 nm and pulse width of 27.5 ps FWHM) and high-energy electron (1–5.8 GeV) beams. Time resolutions of the order of 30 ps for single photoelectrons and 15 ps for electromagnetic showers initiated by 5-GeV electrons, as measured at the shower maximum, are obtained.

47 OTHER INSTRUMENTATION↗

Identification of low-momentum muons in the CMS detector using multivariate techniques in proton-proton collisions at $\sqrt{s}$ = 13.6 TeV

“Soft” muons with a transverse momentum below 10 GeV are featured in many processes studied by the CMS experiment, such as decays of heavy-flavor hadrons or rare tau lepton decays. Maximizing the selection efficiency for these muons, while simultaneously suppressing backgrounds from long-lived light-flavor hadron decays, is therefore important for the success of the CMS physics program. Multivariate techniques have been shown to deliver better muon identification performance than traditional selection techniques. To take full advantage of the large data set currently being collected during Run 3 of the CERN LHC, a new multivariate classifier based on a gradient-boosted decision tree has been developed. It offers a significantly improved separation of signal and background muons compared to a similar classifier used for the analysis of the Run 2 data. The performance of the new classifier is evaluated on a data set collected with the CMS detector in 2022 and 2023, corresponding to an integrated luminosity of 62 fb -1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long-lived axionlike particles from tau decays

Axionlike particles (ALPs) are well-motivated examples of light, weakly coupled particles in theories beyond the Standard Model. In this work, we study long-lived ALPs coupled exclusively to leptons in the mass range between 2⁢𝑚 𝑒 and 𝑚 𝜏 − 𝑚 𝑒 . For anarchic flavor structure the leptophilic ALP production in tau decays or from ALP-tau bremsstrahlung is enhanced thanks to derivative couplings of the ALP and can surpass production from electron and muon channels, especially for ALPs heavier than 𝑚 𝜇 . Using past data from high-energy fixed-target experiments such as CHARM and BEBC we place new constraints on the ALP decay constant 𝑓 𝑎 , reaching scales as high as 𝒪⁡(10 8 ) GeV in lepton-flavor-violating channels and 𝑓 𝑎 ∼ 𝒪⁡(10 2 ) GeV in lepton-flavor-conserving ones. We also present projections for the event-rate sensitivity of current and future detectors to ALPs produced at the Fermilab Main Injector, the CERN SPS, and in the forward direction of the LHC. We show that SHiP will be sensitive to 𝑓 𝑎 values that are over an order of magnitude above the existing constraints.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Feebly-interacting particles: FIPs 2020 workshop report

With the establishment and maturation of the experimental programs searching for new physics with sizeable couplings at the LHC, there is an increasing interest in the broader particle and astrophysics community for exploring the physics of light and feebly-interacting particles as a paradigm complementary to a New Physics sector at the TeV scale and beyond. FIPs 2020 has been the first workshop fully dedicated to the physics of feebly-interacting particles and was held virtually from 31 August to 4 September 2020. The workshop has gathered together experts from collider, beam dump, fixed target experiments, as well as from astrophysics, axions/ALPs searches, current/future neutrino experiments, and dark matter direct detection communities to discuss progress in experimental searches and underlying theory models for FIPs physics, and to enhance the cross-fertilisation across different fields. FIPs 2020 has been complemented by the topical workshop “Physics Beyond Colliders meets theory”, held at CERN from 7 June to 9 June 2020. This document presents the summary of the talks presented at the workshops and the outcome of the subsequent discussions held immediately after. It aims to provide a clear picture of this blooming field and proposes a few recommendations for the next round of experimental results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance portability for the CMS Reconstruction with Alpaka

For CMS, Heterogeneous Computing is a powerful tool to face the computational challenges posed by the upgrades of the LHC, and will be used in production at the High Level Trigger during Run 3. In principle, to offload the computational work on non-CPU resources, while retaining their performance, different implementations of the same code are required. This would introduce code-duplication which is not sustainable in terms of maintainability and testability of the software. Performance portability libraries allow to write code once and run it on different architectures with close-to-native performance. The CMS experiment is evaluating performance portability libraries for the near term future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coalescence, the thermal model and multi-fragmentation: the energy and volume dependence of light nuclei production in heavy ion collisions

Here, we present results of a phase space coalescence approach within the UrQMD transport and -hybrid model for a very wide range of beam energies from SIS to LHC. The coalescence model is able to qualitatively describe the whole range of experimental data with a fixed set of parameters. Some systematic deviations are observed for very low beam energies where the role of feed down from heavier nuclei and multi-fragmentation becomes relevant. The coalescence results are mostly very close to the thermal model fits. However, both the coalescence approach as well as thermal fits are struggling to simultaneously describe the triton multiplicities measured with the STAR and ALICE experiment. The double ratio of tp/d 2 , in the coalescence approach, is found to be essentially energy and centrality independent for collisions of heavy nuclei at beam energies of E lab > 10A GeV. On the other hand the clear scaling of the d/p 2 and t/p 3 ratios with the systems volume is broken for peripheral collisions, where a canonical treatment and finite size effects become more important.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An upgraded cryogenic test stand for HL-LHC cryo-assemblies

The Fermilab horizontal test stand previously used for testing the LHC inner triplet quadrupoles has been upgraded to test cryo-assemblies for the high-luminosity LHC upgrade (HL-LHC). The test requirements of these new cryo-assemblies required additional capabilities of the test stand cryogenic system, including controlled cool-down and warm-up, helium recovery after a quench, and operation at higher pressures. Most of these upgrades were completed to support a zero-magnet test in late 2020, with the remainder of the upgrades completed to support the first pre-series cryo-assembly test in early 2022. An overview of the design and initial operating experience of the upgraded test stand cryogenic system and associated process controls system are presented in this paper.

Rabehl, Roger J.↗

A methodology to compute the critical current limit in Nb3Sn magnets

Numerous experiments have shown that the loads applied to Nb3Sn strands and cables can reduce their critical current. Experiments, performed on uniaxially loaded strands, allowed to define clear laws to describe the evolution of the critical surface as a function of the applied current, field, temperature and strain. It is, however, still unclear how these laws can be applied to superconducting magnets. The present paper proposes a methodology to estimate the critical current and temperature margin reduction on superconducting magnets due to stress on the superconducting material. The methodology is tested on the MQXF magnets, a quadrupole developed for the High Luminosity LHC project, and successfully validated by comparing computed strain with data from strain gauge measurements. Overall, results suggested that, because of the stresses arising in winding during assembly, cool-down and powering, the current limit of the magnet is lower than the expected short sample limit, and that the most critical region does not coincide with the peak field location.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurements of $W^{+}W^{-}$ production in decay topologies inspired by searches for electroweak supersymmetry

This paper presents a measurement of fiducial and differential cross-sections for $W$ + $W$ - production in proton–proton collisions at $\sqrt{s}$ = $13$ TeV with the ATLAS experiment at the Large Hadron Collider using a dataset corresponding to an integrated luminosity of 139 fb -1 . Events with exactly one electron, one muon and no hadronic jets are studied. The fiducial region in which the measurements are performed is inspired by searches for the electroweak production of supersymmetric charginos decaying to two-lepton final states. The selected events have moderate values of missing transverse momentum and the ‘stransverse mass’ variable $m$ T2 , which is widely used in searches for supersymmetry at the LHC. The ranges of these variables are chosen so that the acceptance is enhanced for direct $W$ + $W$ - production and suppressed for production via top quarks, which is treated as a background. The fiducial cross-section and particle-level differential cross-sections for six variables are measured and compared with two theoretical SM predictions from perturbative QCD calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Muon identification using multivariate techniques in the CMS experiment in proton-proton collisions at sqrt(s) = 13 TeV

The identification of prompt and isolated muons, as well asmuons from heavy-flavour hadron decays, is an important task. Wedeveloped two multivariate techniques to provide highly efficientidentification for muons with transverse momentum greater than10 GeV. One provides a continuous variable as an alternative to acut-based identification selection and offers a betterdiscrimination power against misidentified muons. The other oneselects prompt and isolated muons by using isolation requirements toreduce the contamination from nonprompt muons arising inheavy-flavour hadron decays. Both algorithms are developed using59.7 fb$^{-1}$ of proton-proton collisions data at a centre-of-massenergy of √(s)=13 TeV collected in 2018 with the CMSexperiment at the CERN LHC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First polarisation measurement of coherently photoproduced J/ ψ in ultra-peripheral Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The first measurement of the polarisation of coherently photoproduced J/ψ mesons in ultra-peripheral Pb–Pb collisions, using data at $\sqrt{s_{NN}}$ = 5.02 TeV, is presented. The J/ψ meson is measured via its dimuon decay channel in the forward rapidity interval –4.0 < y < –2.5 using the ALICE detector at the CERN LHC. An event sample corresponding to an integrated luminosity of 750 μb –1 ± 5% (syst) is analysed. Hadronic activity is highly suppressed since the interaction is mediated by a photon. The polar and azimuthal angle distributions of the decay muons are measured, and the polarisation parameters λ θ , λ φ , λ θφ , are extracted. The analysis is carried out in the helicity frame. The results are found to be consistent with a transversely polarised J/ψ. These values are compared with previous measurements by the H1 and ZEUS experiments. The polarisation parameters of coherent J/ψ photoproduction in Pb–Pb collisions are found to be consistent with the s-channel helicity conservation hypothesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗