SEARCH · Search NASA

Results for “Linear Collider”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Evolution of the superconducting properties from binary to ternary APC-Nb 3 Sn wires

We present a study conducted on binary Tube Type and ternary powder-in-tube Nb 3 Sn wires manufactured using the artificial pinning centres-internal oxidation method. All the specimens are doped with Zr: oxide nano-particles of this element are responsible for the pinning improvement, both by refining the A-15 grain-size and their own point-pinning contribution. Low-field J c magnetometry confirms that the hadron-hadron Future Circular Collider (FCC-hh) specifications are met by one ternary doped-sample. The differences in microstructure were assessed by scanning electron microscopy/transmission electron microscopy to clarify the reasons for the pinning improvement between the two generations. The deviations from the Dew Hughes model are also discussed, underlying some non-linear addition due to competition between the two pinning mechanisms. Finally, we show how the introduction of Ta as a ternary addition influences the A-15 phase by focusing on the radial inhomogeneities, evaluating the T c distribution and Sn composition gradients. The latter are used to model the currents, enabling us to evaluate the individual weights of the pinning mechanisms and their absolute contributions at the High Luminosity-Large Hadron Collider and FCC-hh dipoles operational points.

43 PARTICLE ACCELERATORS↗

DOE OSTI2015

Epicyclic helical channels for parametric resonance ionization cooling

Proposed next-generation muon colliders will require major technical advances to achieve rapid muon beam cooling requirements. Parametric-resonance Ionization Cooling (PIC) is proposed as the final 6D cooling stage of a high-luminosity muon collider. In PIC, a half-integer parametric resonance causes strong focusing of a muon beam at appropriately placed energy absorbers while ionization cooling limits the beam’s angular spread. Combining muon ionization cooling with parametric resonant dynamics in this way should then allow much smaller final transverse muon beam sizes than conventional ionization cooling alone. One of the PIC challenges is compensation of beam aberrations over a sufficiently wide parameter range while maintaining the dynamical stability with correlated behavior of the horizontal and vertical betatron motion and dispersion. We explore use of a coupling resonance to reduce the dimensionality of the problem and to shift the dynamics away from non-linear resonances. PIC simulations are presented.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Power counting energy flow polynomials

Power counting is a systematic strategy for organizing collider observables and their associated theoretical calculations. In this paper, we use power counting to characterize a class of jet substructure observables called energy flow polynomials (EFPs). EFPs provide an overcomplete linear basis for infrared-and-collinear safe jet observables, but it is known that in practice, a small subset of EFPs is often sufficient for specific jet analysis tasks. By applying power counting arguments, we obtain linear relationships between EFPs that hold for quark and gluon jets to a specific order in the power counting. We test these relations in the parton shower generator Pythia, finding excellent agreement. Power counting allows us to truncate the basis of EFPs without affecting performance, which we corroborate through a study of quark-gluon tagging and regression.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Crossing transition in the EIC HSR with a resonance island jump scheme

The Resonance Island Jump (RIJ) scheme for transition crossing in the Hadron Storage Ring of the Electron-Ion Collider is radically new, and untested. Beam experiments in RHIC will be necessary if it becomes necessary to consider the RIJ scheme as a serious alternative to upgrading the first order linear jump scheme currently implemented in RHIC. This paper outlines the theoretical foundations of the RIJ scheme, and considers how a beam experiment in RHIC could be performed.

Accelerator Physics↗

DOE OSTI2016

The systematic study of N/Z dependence on surface diffuseness parameter in the fusion of heavy neutron-rich colliding nuclei

Surface diffuseness parameter used in Woods-Saxon form of potential have been extracted from a large number of experimentally studied neutron-rich fusion cross sections at near barrier energies. The results of our systematic study reveals that the extracted diffuseness parameter depend linearly on the N/Z ratio of the fusing nuclei. Further, we demonstrated that the extracted values of surface diffuseness parameter lies within the range a = 0.40 to 0.77 fm as compared to commonly accepted value form scattering i.e. 0.63 fm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Evaluation of the response to electrons and pions in the scintillating fiber and lead calorimeter for the future electron-ion collider

The performance of the Baby Barrel Electromagnetic Calorimeter (Baby BCAL) — a small-scale lead-scintillating-fiber (Pb/ScFi) prototype of the GlueX Barrel Electromagnetic Calorimeter (BCAL) — was tested in a dedicated beam campaign at the Fermilab Test Beam Facility (FTBF). This study provides a benchmark for the Pb/ScFi component of the future Barrel Imaging Calorimeter (BIC) in the ePIC detector at the Electron-Ion Collider (EIC). The detector response to electrons and pions was studied at beam energies between 4 and 10 GeV, extending previous GlueX tests to a higher energy regime. The calibrated detector exhibits good linearity within uncertainties, and its electron energy resolution meets EIC requirements. The data further constrain the constant term in the energy resolution to below 1.9%, improving upon previous constraints at lower energies. Simulations reproduce key features of the electron and pion data within the limitations of the collected dataset and the FTBF test environment. Electron-pion separation in the test beam setup was analyzed using multiple methods, incorporating varying degrees of beam-related effects. The inclusion of longitudinal shower profile information enhanced the separation performance, underscoring its relevance for the full-scale BIC in ePIC. These results provide essential benchmarks for the Pb/ScFi section of the future BIC, validating detector simulations and guiding optimization strategies for electron-pion discrimination.

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

JIMWLK on a quantum computer

We propose a method for solving the Jalilian-Marian-Iancu-McLerran-Weigert-Leonidov-Kovner (JIMWLK) evolution equation on quantum computers. Our approach exploits the reformulation of the JIMWLK equation as a Lindblad master equation governing the rapidity evolution of the hadronic density matrix, as established in prior work. To render the problem tractable for quantum simulation, we introduce several approximations: the two-dimensional transverse plane is reduced to a one-dimensional radial lattice by assuming azimuthal symmetry of the jump operators; the gauge group is restricted to SU(2); and the infinite Wilson lines of the JIMWLK equation are replaced by finite Wilson links along the light-cone direction. The resulting bosonic Hilbert space is truncated using the electric field basis familiar from Hamiltonian lattice gauge theory, with states restricted to angular momenta 𝑗 ≤ 𝑗 max . We derive the matrix elements of the JIMWLK Lindblad jump operators in this basis. As a benchmark, we demonstrate rapid convergence of the fundamental dipole expectation value with 𝑗 max for both pure and mixed Gaussian initial density matrices. For the simplest truncation, 𝑗 max =1/2, we implement the Lindblad evolution using a quantum simulation algorithm verified with the Qiskit statevector simulator by decomposing the non-unitary evolution operator into a linear combination of unitaries. This work establishes a concrete pathway toward quantum simulation of high-energy quantum chromodynamics evolution equations, with direct relevance to the physics program of the Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Rapid Cycling ReBCO Dipole Magnet Concept for Muon Acceleraion

We present a concept of the rapid-cycling 1.7 T ReBCO magnet for 1 to 10 kT/s ramping range as required for muon acceleration in a future muon collider presently under study. This approach is based on the 6 kA CORC-like cable constructed with 12 superconducting ReBCO tapes of 2 mm width. Based on theoretical prediction there is a linear scaling of the ReBCO cable hysteresis loss with the crossing magnetic field possibly generating power loss independent of the magnetic field ramping speed. This feature makes this ReBCO cable suitable for the construction of rapid-cycling magnets. In this work we outline the design of a dipole magnet for 1.7 T gap magnetic field and discuss the helium coolant parameters for the minimal electric power.

Piekarz, Henryk [Fermilab] (ORCID:0000000194225662↗

DOE OSTI2025

Rapid-cycling ReBCO dipole magnet concept for muon acceleration

Piekarz, Henryk [Fermilab] (ORCID:0000000194225662↗

DOE OSTI2022

Nonlinear Quantum Electrodynamics in Dirac Materials

Classical electromagnetism is linear. However, fields can polarize the vacuum Dirac sea, causing quantum nonlinear electromagnetic phenomena, e.g., scattering and splitting of photons, that occur only in very strong fields found in neutron stars or heavy ion colliders. We show that strong nonlinearity arises in Dirac materials at much lower fields ~1 T, allowing us to explore the nonperturbative, extremely high field limit of quantum electrodynamics in solids. We explain recent experiments in a unified framework and predict a new class of nonlinear magnetoelectric effects, including a magnetic enhancement of dielectric constant of insulators and a strong electric modulation of magnetization. We propose experiments and discuss the applications in novel materials.

36 MATERIALS SCIENCE↗

DOE OSTI2016

DOE-HEP Final Report for 2013-2016: Studies of plasma wakefields for high repetition-rate plasma collider, and Theoretical study of laser-plasma proton and ion acceleration

There were two goals for this funded project: 1. Studies of plasma wakefields for high repetition-rate plasma collider, and 2. Theoretical study of laser-plasma proton and ion acceleration. For goal 1, an analytical model was developed to determine the ion-motion resulting from the interaction of non-linear “blow-out” wakefields excited by beam-plasma and laser-plasma interactions. This is key to understanding the state of the plasma at timescales of 1 picosecond to a few 10s of picoseconds behind the driver-energy pulse. More information can be found in the document. For goal 2, we analytically and computationally analyzed the longitudinal instabilities of the laser-plasma interactions at the critical layer. Specifically, the process of “Doppler-shifted Ponderomotive bunching” is significant to eliminate the very high-energy spread and understand the importance of chirping the laser pulse frequency. We intend to publish the results of the mixing process in 2-D. We intend to publish Chirp-induced transparency. More information can be found in the document.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Proton Beam Emittance Growth due to Centroid Fluctuations in Strongly Disrupted Electron Bunches in the Linac-Ring eRHIC

In the energy recovery linac (ERL) based eRHIC design, the electron beam, accelerated in a superconducting ERL, collides with the proton beam circulating in the RHIC ring ones, undergoing a very strong beam-beam interaction with the protons, which warrants careful examination. Following the analysis of the transverse disruption and linear mismatch effects in the electron beam caused by beam-beam collision discussed in [2], we adopt the beam parameters listed in Table I for the eRHIC linac-ring design. After a review of the electron disruption process, we perform long term strong-strong beam-beam simulations with a modification of K. Ohmi’s strong-strong beam-beam code BBSS, with the modification consisting of the regeneration of the electron beam after every collision with the proton beam. With the parameters listed in Table I, a kink instability is observed in the proton beam. By reducing the proton bunch length, thus decreasing the electron disruption parameter, the kink instability is observed to disappear for a proton bunch length σ z,p < 10 cm, or electron disruption parameter d e < 1.5. The effect of random offsets in the electron bunch centroids on the long term stability of the proton beam is studied next, with a proton bunch length σ z,p = 6.3 cm (d e = 0.9), thus below the kink instability threshold. The random offsets of the electron bunch centroids are assumed to be Gaussian distributed, with standard deviation offs, and "delta-correlated" in time (white noise). Studies to take into account finite time-correlation effects and random offsets generated by non-Gaussian random processes will be considered in the future. The effect from fluctuations in the electron bunch population has been studied analytically and will be discussed numerically in a companion paper.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Status of QCD precision predictions for Drell–Yan rapidity distributions

We compute differential distributions for Drell–Yan processes at the LHC and the Tevatron colliders at next-to-next-to-leading order in perturbative QCD, including fiducial cuts on the decay leptons in the final state. The comparison of predictions obtained with four different codes shows excellent agreement, once linear power corrections from the fiducial cuts are included in those codes that rely on phase-space slicing subtraction schemes. For Z-boson production we perform a detailed study of the symmetric cuts on the transverse momenta of the decay leptons. Predictions at fixed order in perturbative QCD for those symmetric cuts, typically imposed in experiments, suffer from an instability. We show how this can be remedied by an all-order resummation of the fiducial transverse momentum spectrum, and we comment on the choice of cuts for future experimental analyses.

Alekhin, S. [University of Hamburg (Germany)]↗

DOE OSTI2020

Probing the Partonic Degrees of Freedom in High-Multiplicity p–Pb collisions at √ s NN = 5.02 TeV

We investigate the role of partonic degrees of freedom in high-multiplicity p–Pb collisions at √ s NN = 5.02 TeV carried out at the Large Hadron Collider (LHC) by studying the production and collective flow of identified hadrons at intermediate p T via the coalescence of soft partons from the viscous hydrodynamics (VISH 2 + 1) and hard partons from the energy loss model, linear Boltzmann transport (LBT). We find that combining these intermediate p T hadrons with the low p T hadrons from the hydrodynamically expanding fluid and high p T hadrons from the fragmentation of quenched jets, the resulting hydro-dynamics-coalescence-fragmentation model provides a nice description of measured p T spectra and differential elliptic flow v 2 (p T ) of pions, kaons, and protons over the p T range from 0 to 6 GeV. We further demonstrate the necessity of including the quark coalescence contribution to reproduce the experimentally observed approximate number of constituent quark scaling of hadron v 2 at intermediate p T . Furthermore, our results thus indicate the importance of partonic degrees of freedom and also hint at the possible formation of quark-gluon plasma in high-multiplicity p–Pb collisions at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2019

Update on the JLEIC Electron Collider Ring Design

The design concept of electron collider ring in the Jefferson Lab Electron-Ion Collider (JLEIC) is based on a small beam size at the interaction point (IP) to boost the luminosity. With a chosen beta-star at the IP, electron beam size is determined by the equilibrium emittance obtained by the linear optics design. In this paper, we present an update on the lattice design of the electron ring considering not only preservation of low beam emittance, but also optimization of geometric arrangement. In particular, recently development of the lattice design has been focused on incorporating the vertical dogleg, which brings the electron beam to the ion beam plane for collisions, in the spin rotator design. The vertical dogleg is designed with no horizontal emittance growth, controlled vertical emittance and no first-order effect on the electron polarization. Single particle nonlinear beam dynamics study is also performed to explore the momentum acceptance and dynamic aperture in this updated design.

Lin, F.↗

DOE OSTI2026

Assessment of BPM options for the EIC Beam Accumulator Ring

The electron injection system for the Electron-Ion Collider (EIC) at BNL is designed to provide a beam of polarized electrons, which is crucial for studying the structure of protons and atomic nuclei. The Beam Accumulator Ring (BAR) is a part of the injection chain between the 750 MeV linear accelerator and the Rapid Cycling Synchrotron (RCS), which accelerates the beam up to full energy (5–18 GeV). The functional role of the BAR is to accumulate the charge injected from the linear accelerator in order to achieve the high intensity of the polarized electron beam required by the specifications for injection into the RCS. This objective will be realized through the sequential injection of bunches with a charge of 1.1 nC at a repetition rate of 30 Hz. Once the charge of a single bunch reaches 28 nC, the beam will be extracted from the BAR and injected into the RCS. The beam instrumentation needs to provide reliable measurements with the required accuracy over the dynamic range from 0.1 nC (one tenth of a typical injected bunch charge) to 32 nC – the maximum expected accumulated current. There are 10 Beam Position Monitors (BPMs) in the ring, 1 extra button-electrode assembly for the RF system, and 8 BPMs in the beam transport lines. The BPM locations are shown in Fig. 1, marked by blue rectangles. The ring BPMs will be capable of both average orbit and turn-by-turn measurement modes. Accurate measurement of the beam position with a large horizontal offset requires polynomial correction of the BPM nonlinearity.

43 PARTICLE ACCELERATORS↗

NASA NTRS2018

Conceptual Design of an Experiment to Study Dust Destruction by Astrophysical Shock Waves

A novel laboratory experimental design is described that will investigate the processing of dust grains in astrophysical shocks. Dust is a ubiquitous ingredient in the interstellar medium (ISM) of galaxies; however, its evolutionary cycle is still poorly understood. Especially shrouded in mystery is the efficiency of grain destruction by astrophysical shocks generated by expanding supernova remnants. While the evolution of these remnants is fairly well understood, the grain destruction efficiency in these shocks is largely unknown. The experiments described herein will fill this knowledge gap by studying the dust destruction efficiencies for shock velocities in the range of approximately 10-30 kilometers per second (microns per nanosecond), at which most of the grain destruction and processing in the ISM takes place. The experiments focus on the study of grain-grain collisions by accelerating small (1 millimeter) dust particles into a large (approximately 5-10 millimeter diameter) population; this simulates the astrophysical system well in that the more numerous, small grains impact and collide with the large population. Facilities that combine the versatility of high-power optical lasers with the diagnostic capabilities of X-ray free-electron lasers, e.g., the Matter in Extreme Conditions instrument at the SLAC (originally named Stanford Linear Accelerator Center) National Accelerator Laboratory, provide an ideal laboratory environment to create and diagnose dust destruction by astrophysically relevant shocks at the micron scale.

Manuel, M. J.-E.↗

DOE OSTI2022

An Impartial Perspective for Superconducting Nb$_3$Sn coated Copper RF Cavities for Future Linear Accelerators

This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is unlikely that an ILC will be built in the next ten years with Nb as one of the main cost drivers of SRFs. This paper provides strong arguments on the benefits of using this time for R&D on producing Nb3Sn on inexpensive and thermally efficient metals such as Cu or bronze, while pursuing in parallel the novel U.S. concept of parallel-feed RF accelerator structures. A technology that synergistically uses both of these advanced tools would make an ILC or equivalent machines more affordable and more likely to be built. Such a successful enterprise would readily apply to other HEP accelerators, for instance a Muon Collider, and to accelerators beyond HEP. We present and assess current efforts in the U.S. on the novel concept of parallel-feed RF accelerator structures, and in the U.S. and abroad in producing Nb3Sn films on either Cu or bronze despite minimal funding.

43 PARTICLE ACCELERATORS↗