Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microphonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Cross-correlation methods for studying near- and far-field noise characteristics of several flow-surface interaction problems

Systematic methods based on cross-correlation techniques are presented for experimental studies of near- and far-field noise characteristics of airflow-surface interaction problems. By cross-correlating any two of three-kinds of microphone measurements: one flush-mounted on the surface, one located in the near field, and one placed in the far field, far-field noise intensities and near-field acoustic energy fluxes can be determined. In both near and far fields, the noise characteristics due to the flow turbulence and surface fluctuating pressure contributions can be evaluated separately. Specific applications to the noise field generated by impinging jets, by surface blowing jets, and by turbulent flow over trailing edges are discussed.

Pan, Y. S.↗

Fluid dynamic aspects of jet noise generation

The location of the noise sources within jet flows, their relative importance to the overall radiated field, and the mechanisms by which noise generation occurs, are studied by detailed measurements of the level and spectral composition of the radiated sound in the far field. Directional microphones are used to isolate the contribution to the radiated sound of small regions of the flow, and for cross-correlation between the radiated acoustic field and either the velocity fluctuations or the pressure fluctuations in the source field. Acquired data demonstrate the supersonic convection of the acoustic field and the resulting limited upstream influence of the signal source, as well as a possible increase of signal strength as it propagates toward the centerline of the flow.

Source record↗

Program to stimulate graduate training in the field of aeroacoustics

An experiment is reported to cross correlate the output of hot film probes located at various points in the flow field of a jet-blown flap with the output of microphones in the acoustic far field. Fluid dynamic measurements of the flow fields of the test configuration are reported.

Becker, R. S.↗

Investigation of the aerodynamic noise generating region of a jet engine by means of the simple source fluid dilatation model

An experiment was conducted on a full-scale jet engine to investigate the aerodynamic noise generating regions in the free jet. Cross-correlation measurements were made between the static pressure fluctuations and the farfield radiated sound. These measurements were made for two different static pressure probe positions and a large number of farfield positions (at various angles). In addition, each test geometry was run for four different jet exit velocities. The measured, normalized cross-correlation functions varied between 0.004 and 0.155. A new Q-function, based on the above normalized cross correlation is defined and plotted. This function represents the source strength per unit volume within the jet region. This Q-function shows dependence on the probe position, the angular position of the farfield microphone, and the jet exit Mach number. Third-octave analyses of both the probe signal and the farfield radiated sound were made. The results show that cross-correlation techniques are a valuable tool in the investigation of the aerodynamic noise generating regions of an actual jet engine.

Hurdle, P. M.↗

Density fluctuations and radiated noise for a high-temperature supersonic jet

Experimental data on density fluctuations were obtained by the laser Schlieren method in a supersonic jet which at the nozzle exit had a Mach number of 1.43 and a stagnation temperature of about 1090 K. The jet emerged into the ambient atmosphere in an anechoic chamber, correctly expanded from a nozzle which had an exit diameter of 10.8 cm. Using the information on the density fluctuations and the mean shear obtained by probes, the autocorrelation of the radiated noise was calculated by a theory that is suitable for Mach wave emission. This theory is a modification of that developed by Ffowcs Williams and Maidanik (1965). The calculated noise field agrees well with that obtained by using microphones outside the jet.

Parthasarathy, S. P.↗

Aerosol size spectrum analysis using relaxation time measurement

An experimental method has been developed to measure the dynamic relaxation times of aerosol particles. The particle relaxation time (tau-p) is determined from the ratio of the velocity amplitude of an aerosol particle (v-p) to the velocity amplitude of the medium (u-g) while the aerosol is subjected to acoustic excitation of a known frequency. A differential laser Doppler velocimeter is used to measure v-p, while a microphone is used to measure u-g. From the value of tau-p, the aerodynamic diameter of the particle can be determined if the particle density is known. The method can be applied to real-time in situ measurement of size distribution of an aerosol containing both solid particles and liquid droplets in the range of 0.1-10.0-micron diameters.

Kirsch, K. J.↗

Cross-correlation methods for studying near- and farfield noise characteristics of flow-surface interactions

Systematic methods based on cross-correlation techniques are presented for experimental studies of near- and farfield noise characteristics in airflow-surface interaction problems. Analyses show that, in near- and farfields, the noise characteristics due to the surface contribution of fluctuating pressures and velocities and due to the volume contribution of the turbulence in the flow can be determined separately. Both farfield noise intensities and nearfield acoustic energy fluxes can be expressed in terms of appropriate cross correlations. These correlations can be obtained by making microphone measurements in the farfield, in the nearfield, and on the surface. Examples of the applications to the noise field generated by impinging jets, by surface blowing jets, and by turbulent flow over trailing edges are presented. Advantages of the present method over conventional methods are also discussed.

Pan, Y. S.↗

Nondestructive interior examination of moving parts

Microphone and amplified audio system are used in conjunction with X-ray nondestructive testing to detect foreign particles inside moving hardware when particles cannot be located by X-ray alone.

Baker, F. A.↗

A study of air-to-ground sound propagation using an instrumented meteorological tower

The results of an exploratory NASA study, leading to a better understanding of the effects of meteorological conditions on the propagation of aircraft noise, are reported. The experimental program utilized a known sound source fixed atop an instrumented meteorological tower. The basic experimental scheme consisted of measuring the amplitude of sound radiated toward the ground along a line of microphones fixed to a tower guy wire. Experimental results show the feasibility of this approach in the acquisition of data indicating the variations encountered in the time-averaged and instantaneous amplitudes of propagated sound. The investigation included a consideration of ground reflections, a comparison of measured attenuations with predicted atmospheric absorption losses, and an evaluation of the amplitude fluctuations of recorded sound pressures.

Kasper, P. K.↗

Sound propagation from a simple source in a wind tunnel

The nature of the acoustic field of a simple source in a wind tunnel under flow conditions was examined theoretically and experimentally. The motivation of the study was to establish aspects of the theoretical framework for interpreting acoustic data taken (in wind) tunnels using in wind microphones. Three distinct investigations were performed and are described in detail.

Cole, J. E., III↗

Measurements of mean flow and acoustic power for a subsonic jet impinging normal to a large rigid surface

An experimental study was made to measure the mean flow field and acoustic power of a subsonic jet impinging normal to a large rigid surface. A 6.25 cm diameter, circular cool air jet was used at heights of 20, 10, and 5 jet diameters above the surface. The jet exit Mach number was varied from 0.28 to 0.93. Impact and static pressure surveys were made in directions both axial and lateral to the jet axis and also parallel and perpendicular to the surface. Acoustic power was calculated from microphone measurements made during each test run using a diffuse field calibration for the test facility. Results indicate that the flow field for jet impingement is characterized mainly by a strong rise in static pressure in the impingement region near the surface and by boundary layer development in the wall jet region. Acoustic power measurements generally followed a U(8) law for both the free jet and jet impingement although there was some variation especially at high Mach number and for close impingement distances. Overall noise levels increased with decreasing jet-to-surface height. Normalized power spectra correlated well for all cases when the Strouhal number was greater than 0.2; the correlation was poor when the Strouhal number was low.

Schloth, A. P.↗

Nulling device for detection of trace gases by NDIR absorption

A nondispersive gas analyzing apparatus is described having a first chamber for containing a first gas, the density of which is determined. A source of radiant energy is provided for passing radiant energy through the first chamber. Modulation means are provided for modulating the radiant energy passing through the first chamber by modulating the volume of the chamber at the acoustic resonance frequency of the first gas and the chamber. Signal generating means, including a second chamber for containing a gas which is heated by radiant energy emerging from the first chamber and a microphonic means responsive to the resulting pressurization in the second chamber, is provided for generating a signal, having a frequency and amplitude corresponding to the modulation of the radiant energy in the first chamber.

Dimeff, J.↗

Test-section noise of the Ames 7 by 10-foot wind tunnel no. 1

An investigation was made of the test-section noise levels at various wind speeds in the Ames 7- by 10-Foot Wind Tunnel No. 1. No model was in the test section. Results showed that aerodynamic noise from various struts used to monitor flow conditions in the test section dominated the wind-tunnel background noise over much of the frequency spectrum. A tapered microphone stand with a thin trailing edge generated less noise than did a constant-chord strut with a blunt trailing edge. Noise from small holes in the test-section walls was insignificant.

Soderman, P. T.↗

Feasibility of making sound power measurements in the NASA Langley V/STOL tunnel test section

Based on exploratory acoustic measurements in Langley's V/STOL wind tunnel, recommendations are made on the methodology for making sound power measurements of aircraft components in the closed tunnel test section. During airflow, tunnel self-noise and microphone flow-induced noise place restrictions on the amplitude and spectrum of the sound source to be measured. Models of aircraft components with high sound level sources, such as thrust engines and powered lift systems, seem likely candidates for acoustic testing.

Brooks, T. F.↗

Data analysis and noise prediction for the QF-1B experimental fan stage

The results of a fan noise data analysis and prediction effort using experimental data obtained from tests on the QF-1B research fan are described. Surface pressure measurements were made with flush mounted sensors installed on selected rotor blades and stator vanes and noise measurements were made by microphones located at the far field. Power spectral density analysis, time history studies, and calculation of coherence functions were made. The emphasis of these studies was on the characteristics of tones in the spectra. The amplitude behavior of spectral tones was found to have a large, often predominant, random component, suggesting that turbulent processes play an important role in the generation of tonal as well as broadband noise. Inputs from the data analysis were used in a prediction method which assumes that acoustic dipoles, produced by unsteady blade and van forces, are the important source of fan noise.

Bliss, D. B.↗

Instrumentation and techniques for acoustic research in wind tunnels

Several methods for aiding acoustic measurements inside wind tunnels are described; these include: placing acoustic material in the test section, using low tip-speed drive fans for reducing background noise, using proper microphone strut design for low wind noise, using directional receivers, and simulating the reverberant noise fields. The instrumentation and techniques were developed for acoustic research in both a small and a large closed-test-section wind tunnel at NASA Ames Research Center, and may be applicable to many different types of aeroacoustic wind tunnels.

Soderman, P. T.↗

Flight effects on JT8D engine jet noise as measured in the NASA Ames 40-by 80-foot wind tunnel

A JT8D-17 turbofan engine was tested in a 40 x 80 ft wind tunnel to determine flight effects on jet noise. The engine was configured as a baseline with conical nozzle, a quiet nacelle 20-lobe ejector/suppressor, and an internal mixer with conical nozzle. Tunnel-off and tunnel-on noise tests were conducted over a range of nozzle pressure ratios (1.2 to 2.1), primary jet velocities (275 to 550 m/s), and tunnel velocities up to 100 m/s. Aft quadrant noise data were measured by a pair of traversing microphones located on a 3-m sideline relative to the engine centerline. Unique correlations and analysis procedures were developed in order to define far-field flight effects from the relatively near-field noise measurements. The ejector/suppressor experienced a significant loss of suppression relative to static measurements during flight while the internal mixer indicated a slight gain in suppression. It is concluded that the wind tunnel is a viable method for studying flight effects on engine jet noise.

Strout, F. G.↗

Acoustic pulse propagation in a duct with flow

The effect of a mean flow on acoustic pulse propagation in a wind tunnel of rectangular cross-section is considered both experimentally and theoretically. Pulse shapes in the wind tunnel are recorded by microphones located upstream and downstream of a source. A theoretical model of pulse propagation from a point source located in an infinitely-long rectangular duct carrying a uniform flow is considered. The convective wave equation with boundary conditions appropriate to hard walls is solved by using the Laplace transform. For the input pulse shape used in the experiments, the solution is obtained by numerically evaluating the inverse Laplace transform. The results of experiment and theory are seen to be in good agreement.

Cole, J. E., III↗