Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Compressibility of Nanocrystalline Forsterite

We established an equation of state for nanocrystalline forsterite using multi-anvil press and diamond anvil cell. Comparative high-pressure and high-temperature experiments have been performed up to 9.6 GPa and 1,300 C. We found that nanocrystalline forsterite is more compressible than macro-powder forsterite. The bulk modulus of nanocrystalline forsterite is equal to 123.3 ({+-}3.4) GPa whereas the bulk modulus of macro-powder forsterite is equal to 129.6 ({+-}3.2) GPa. This difference is attributed to a weakening of the elastic properties of grain boundary and triple junction and their significant contribution in nanocrystalline sample compare to the bulk counterpart. The bulk modulus at zero pressure of forsterite grain boundary was determined to be 83.5 GPa.

58 GEOSCIENCES↗

A multiscale study of damage in elastomeric syntactic foams

Damage mechanisms in elastomeric syntactic foams filled with glass microballoons (GMB) and resulting effects on the macroscale elastic constants have been investigated. Direct numerical simulations of the material microstructure, composite theory analyses, and uniaxial compression tests across a range of filler volume fractions were conducted. The room temperature and elastic behavior of composites with undamaged, fully debonded, and fully crushed GMBs were investigated for syntactic foams with a polydimethylsiloxane matrix. Good agreement was obtained between numerical studies, composite theory, and experiments. Debonding was studied via finite element models due to the difficulty of isolating this damage mechanism experimentally. The predictions indicate that the bulk modulus is insensitive to the state of debonding at low-GMB-volume fractions but is dramatically reduced if GMBs are crushed. The shear behavior is affected by both debonding and crush damage mechanisms. The acute sensitivity of the bulk modulus to crushed GMBs is further studied in simulations in which only a fraction of GMBs are crushed. We find that the composite bulk modulus drops severely even when just a small fraction of GMBs are crushed. Various material parameters such as GMB wall thickness, volume fraction, and minimum balloon spacing are also investigated, and they show that the results presented here are general and apply to a wide range of microstructure and GMB filler properties.

36 MATERIALS SCIENCE↗

3D Modeling Effect of Spherical Inclusions on the Magnetostriction of Bulk Superconductors

In this paper, the dependence of the effective magnetostriction of bulk superconductors on the elastic parameters including the volume fraction and elastic modulus ratio is studied by a three-dimensional model consisting of a spherical inclusion–superconducting matrix system. The effect of the elastic modulus and volume fraction on the magnetostriction is also obtained through the magnetostriction loop. The results indicate that the elastic modulus and volume fraction have obvious effects on the effective magnetostriction of the superconducting composite, which gives an explanation about the differences between the experimental and the theoretical results. Furthermore, it is worth pointing out that the linear field dependence of magnetostriction is unique to the Bean model by comparing the curve shapes of the magnetostriction loop with and without inclusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Multi-Walled Carbon Nanotubes on Viscoelastic Properties of PP/Reed Flour Composites

The objective of this investigation was to evaluate the influence of multi-wall carbon nanotubes (MWCNTs) on the dynamic mechanical properties of polypropylene (PP)/reed flour (RF) composites. The experimental samples were prepared through the melt mixing of PP/RF at 50% weight ratios, with various amounts of MWCNTs (0, 1, 2, 3 and 5 phr) in a twin-screw extruder, then the samples made by injection molding. The amount of maleic anhydride grafted polypropylene (PP-g-MA) as a coupling agent was fixed at 2 phr for all formulations. Dynamic mechanical analysis (DMA) tests were carried out to investigate the viscoelastic behavior of nanocomposites. The dynamic mechanical properties such as storage modulus (Eʹ), loss modulus (Eʺ), and damping coefficient (tan δ) of nanocomposites were investigated in the temperature range of −80 to 160 °C at a step of 5 °C and frequency of 1 Hz. The morphology of the specimens was characterized using field emission scanning electron microscope (FE-SEM) technique. Results indicated that the storage modulus of samples was found to increase with incorporation of MWCNTs while damping properties registered a decrease, owing to the reinforcing effect of CNTs into the composites. Moreover, CNTs addition leads to a positive shift in glass transition temperature (T{sub g}), which is explained on the molecular mobility of the polymer chains behavior. Additionally, the minimum adhesion factor is related to samples containing 2 phr MWCNTs which provides the best interaction between polymer and fibers. FE-SEM micrographs showed a predominantly homogeneous CNTs distribution through the composites; however, some aggregates were observed at higher CNTs fractions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical, Dynamic Mechanical and Thermal Properties of Banana Fiber/Recycled High Density Polyethylene Biocomposites Filled with Flyash Cenospheres

This study presents the preparation of Natural fiber-reinforced biocomposites based on Recycled High Density Polyethylene (RHDPE)/Banana Fiber (BF)/Fly ash Cenospheres (FACS) and aims to increase the economic value of these waste materials. Maleic anhydride grafted HDPE (MA-g-HDPE) was used as a compatibilizer to increase the dispersion of fibers into the polymer matrix as well as to increase the compatibility between the matrix and fillers. Variation in mechanical, thermal and dynamic mechanical properties with the addition of FACS in RHDPE/BF composites was investigated. It was observed that 7.5 wt% FACS, 30 wt% BF and 3 wt% MA-g-HDPE within RHDPE matrix resulted in an increase in tensile strength to 17%, tensile modulus to 188%, flexural strength to 38%, flexural modulus to 159% and hardness to 37% as compared with the RHDPE matrix. Significant enhancement in the thermal stability of the RHDPE/BF biocomposites was also observed in presence of FACS under thermogravimetric analysis. The morphology of the prepared biocomposites has been examined by using scanning electron microscopy. Dynamic mechanical analysis tests revealed an increase in storage and loss modulus of the biocomposite system. The use of such recycled material, agricultural and industrial wastes increased the properties of the final product suggesting their use to be a good alternative in the production of polymeric composites.

36 MATERIALS SCIENCE↗

Rheology, Mechanical Properties and Morphology of Poly(lactic acid)/Ethylene Vinyl Acetate Blends

In this work, the effect of ethylene vinyl acetate (EVA) content on the rheology, mechanical properties, and morphology of poly (lactic acid) (PLA)/EVA blends was investigated. Differential Scanning Calorimetry (DSC) showed that the addition of EVA to PLA decreased the degree of crystallinity of PLA. Dynamic Mechanical Thermal Analysis (DMTA) results showed that the presence of EVA copolymer increased the cold crystallization temperature (T{sub cc}) of PLA. The addition of 10% of EVA to PLA substantially increased the impact strength. Morphology analysis by Scanning Electron Microscopy (SEM) indicated the immiscibility between PLA and EVA phases and an in increase the EVA average dispersed phase domains size with the increase in EVA content. Rheological measurements under oscillatory shear flow showed that storage modulus (G′) increased with the increase in the EVA content at low frequencies and is related to the increase in the EVA dispersed phase domains size, as also observed by relaxation spectrum analysis. Cole–Cole plots of imaginary viscosity (η″) versus real viscosity (η′) and Han plots of storage modulus (G′) versus loss modulus (G″) indicated that PLA and EVA phases are immiscible, as also observed by SEM.

36 MATERIALS SCIENCE↗

Mechanical and Thermal Properties of Green Thermoplastic Elastomer Vulcanizate Nanocomposites Based on Poly (vinyl chloride) and Nitrile Butadiene Rubber Containing Organoclay and Rice Straw Natural Fibers

Green thermoplastic elastomer vulcanizates (GTPV) nanocomposites using poly (vinyl chloride) (PVC) and nitrile butadiene rubber (NBR) containing 5 wt% Cloisite 30B as an organoclay and various concentrations of rice straw natural fibers were made by melt mixing process and compression molding. The effect of used organoclay and various loadings of rice straw was monitored through using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), tensile tests and rheological measurements. The morphological investigations revealed that the GTPV nanocomposites reinforced by rice straw natural fiber show a more rough fracture surfaces indicated the existence of some interactions between the natural fiber and polymer matrix. Thermal decomposition measurements revealed a higher thermal stability for GTPV nanocomposites containing higher rice straw natural fibers. The tensile test analysis suggested that there is an optimum value for the weight fraction of rice straw to enhance the Young’s modulus and tensile strength of the prepared GTPV nanocomposites up to 9 MPa and 35 MPa, respectively. The effect of rice straw loading on the Young’s modulus of the PVC/NBR/organoclay GTPV nanocomposites was predicted through using the parallel and series equations of modified Ji’s model. The results show that the theoretical model can precisely predict the variation of Young’s modulus with respect to the rice straw loading.

36 MATERIALS SCIENCE↗

Theoretical Investigation of the Mechanical and Thermodynamic Properties of the Layered Yttrium Diborocarbides

The mechanical, electronic, and thermodynamic properties of typical layered structure yttrium diborocarbides (YB{sub 2}C{sub 2}) were investigated by the density functional theory. The calculated lattice constants were slightly higher than the available experimental data. The elastic constants revealed that YB{sub 2}C{sub 2} was mechanically stable. The bulk modulus (190.8 GPa), shear modulus (127.4 GPa), Young’s modulus (312.7 GPa), Poisson’s ratio (0.227), and Vickers hardness (18–19 GPa) were obtained, and the ductility, plasticity, and elastic anisotropy were further analyzed. The total and partial density of states were also calculated, indicating that the metallic character was mainly attributed to the contribution from Y-4d states and weakly hybridized with the 2p states from the B and C atoms. Finally, we obtained the Debye, melting, and the superconducting transition temperatures of YB{sub 2}C{sub 2} as 824, 2239 and 2.38 K, respectively. Our study showed that YB{sub 2}C{sub 2} offers potential in superconductivity or ultrahigh temperature applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elasticity, Anisotropy and Magnetism of Anti-perovskite M{sub 3}AlC (M=Ti, Fe, Sm) from First-Principle Calculations

Elasticity, anisotropy, and magnetism of anti-perovskite M{sub 3}AlC (M=Ti, Fe, Sm) have been calculated and investigated via non-relativistic density functional theory. And the elasticity constant, elastic modulus, Poisson ratio, and Cauchy pressure of three structures have been obtained. Based on the Poisson ratio, Pugh modulus ratio, and Cauchy pressure, bonding attributes of the three materials have been analyzed. The result showed that Ti{sub 3}AlC is a brittle material with high degrees of strength, rigidity, and hardness, and Sm{sub 3}AlC and Fe{sub 3}AlC possess excellent toughness. Based on the universal elastic anisotropy index A{sup U}, anisotropy fraction ratios A{sub B}, A{sub G}, and A{sub E},and Zener factor A, it showed that all three M{sub 3}AlC structures demonstrated elasticity and anisotropy. The elasticity and anisotropy of the three M{sub 3}AlC structures has been illustrated in three-dimensional images of the elastic modulus. Compared with Ti{sub 3}AlC and Fe{sub 3}AlC, Sm{sub 3}AlC has a significantly higher level of anisotropy. Moreover, in this paper, the magnetism of transition metal Fe and rare earth element Sm in the M{sub 3}AlC structure has been compared and analyzed from the perspective of the electronic structure and population analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insight into Phase Transition, Electronic, Magnetic, Mechanical, and Thermodynamic Properties of TbTe: a DFT Investigation

Theoretical investigation on TbTe for its structural, electronic, magnetic, and thermodynamic stuffs has been carried within density functional theory (DFT) as implemented in WIEN2K code. TbTe was found stable in ferromagnetic phase. The calculated ground-state parameters were found in a good agreement with the experimental data. The compound was found to have a structural stability in cubic B1 (NaCl-type structure) phase, but under the application of high pressure (at 27 GPa), it undergone to B2 (CsCl-type structure) phase of pressure. The second-order elastic constants and mechanical properties like Young’s modulus, Shear modulus, Poisson ratio, Cauchy pressure (C{sub 12}–C{sub 44}), and Pugh’s ratio (B/G) were calculated. The present calculations confirmed the ductile nature of TbTe. Further, the thermodynamic investigations have been carried using quasi-harmonic Debye approximation. We have calculated the pressure and temperature dependence of Debye temperature (𝜃{sub D}), bulk modulus (B), thermal expansion (α), heat capacities (C{sub V}), and entropy (S) in the temperature range of 0 to 1000 K and pressure range of 0 to 25 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nano-Deformation Behavior of a Thermally Aged Duplex Stainless Steel Investigated by Nanoindentation, FIB and TEM

Nanoindentation and electron backscattering diffraction were conducted on a thermally aged duplex stainless steel to investigate the effect of crystal orientation on the plastic deformation behavior during indentation testing. Both nanohardness H and indentation modulus E are correlated with the orientation factor averaged over three normal directions of the contact surface. After thermal aging, the orientation dependence of the hardness and indentation modulus in ferrite significantly changed. For both the ferrite and austenite phases, the maximum and minimum values of the hardness and indentation modulus are given by the near-〈111〉 and near-〈001〉-oriented grains, respectively. The TEM analysis results indicate that the area of plastic deformation in the ferrite grain decreases after thermal aging. The interactions between precipitates and dislocations are considered to be responsible for the degradation of plastic deformation ability in ferrite. The anisotropy of hardness is related to the crystallographic nature and shearing mechanisms.

36 MATERIALS SCIENCE↗

Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite

In this paper, the surface properties and morphologies of the concentrated nitric acid (HNO{sub 3})-modified carbon fiber (CF) were characterized by XPS, SEM, and contact angle goniometer, respectively. The results showed that both the oxygen-containing functional groups content and the surface roughness of concentrated HNO{sub 3}-modified CF significantly increased. The contact angle of concentrated HNO{sub 3}-modified CF was obviously lower than that of unmodified CF. Studies on the mechanical properties of carbon-fiber-reinforced ultrahigh-molecular-weight polyethylene (CF/UHMWPE) composite revealed that the stress–strain behavior gradually changed from nonlinear to linear relationship with the rise of CF content in UHMWPE matrix. Both the tensile strength and modulus increased with the rise of CF content. Conversely, as the CF content in UHMWPE matrix is increasing, the flexural strength and modulus increased first and then decreased. The flexural strength and modulus of CF/UHMWPE composite with 30 wt.% CF content reached the maximum value of 157.61 MPa and 9.82 GPa, respectively. Moreover, the CF surface modification and CF content have a synergistic effect on the tensile and flexural mechanical properties of the CF/UHMWPE composite. The influence of CF modification on the tensile and flexural mechanical properties of the composite became more and more obvious with the rise of CF content.

36 MATERIALS SCIENCE↗

A Biomedical Ti-35Nb-5Ta-7Zr Alloy Fabricated by Powder Metallurgy

Ti-35Nb-5Ta-7Zr alloy for biomedical applications with a reduced Young’s modulus of less than 10 GPa, being comparable to that of human bones, was successfully fabricated by powder metallurgy method. The microstructure, compressive and tensile behavior were studied. Results indicate that Ti-rich and Ta-rich phases co-exist in β-matrix. Ti-35Nb-5Ta-7Zr alloys yield at about 10% in compression, with increasing in the content of process control agent, the resultant compressive yield strength and Young’s modulus increase from 650 ± 46 to 1055 ± 90 MPa and from 6.3 ± 0.03 to 8.24 ± 0.04 GPa, respectively. The tensile fractography of alloy with 9.7 GPa tensile Young’s modulus, 433 MPa UTS at the 5.5% elongation consists of cleavage fracture and ductile fracture with dimples. The failure mechanism has been discussed taking the intrinsic microstructural features into consideration.

36 MATERIALS SCIENCE↗

Assessment of Mechanical Properties for Dissimilar Metal Welds: A Nondestructive Approach

Several engineering components are fabricated by joining similar or dissimilar materials. In the present investigation, welded joints between low alloy steel and austenitic stainless steel were considered. This assembly is one of the critical components in the heat transport system of water-cooled reactors of nuclear power plants. 309L austenitic stainless steel and IN 182 alloys were used for buttering low alloy steel during fabrication of joints. Weld metal was 308L austenitic stainless steel and IN 182, respectively, for the two assemblies. Buttering by 309L SS was performed by gas tungsten arc welding, and the same was done by shield metal arc welding at the time of applying IN 182. Joining of 304L SS and buttered assembly in both the cases was carried out by shield metal arc welding. Evaluation of Vickers micro-hardness was done across the weld centerline for both joints. Microstructure of different regions was examined for the joints. Apart from conventional destructive tests, ultrasonic evaluation of joints was also carried out to ensure weld integrity. In this respect, ultrasonic velocity in longitudinal and shear mode was measured along the transverse direction of the weld. Young’s modulus was determined using ultrasonic tests as well as from the average hardness of different regions. The obtained Young’s modulus by two different techniques revealed satisfactory co-relation. The Young’s modulus obtained from ultrasonic measurements was used to determine the yield strength of different regions across the welds. This technique proved to be useful in identifying the failure prone area across the welded joint.

36 MATERIALS SCIENCE↗

Material extrusion with integrated compression molding of NdFeB/SmFeN nylon bonded magnets using small- and large-scale pellet-based 3D-printers

High-density bonded rare-earth magnets are manufactured using pellet-fed additive manufacturing (AM)/material extrusion and an integrated additive manufacturing-compression molding (AM-CM) process. Neodymium iron boron – samarium iron nitride in polyamide 12 (NdFeB-SmFeN/PA12) of 93 % weight fraction (65 % volume fraction) are used for the study. The mechanical properties (tensile strength and modulus), magnetic properties (maximum energy density, coercivity, remanence) are reported. Manufacturing parameters such as layer height, barrel temperatures, screw speed and gantry feed rate are optimized to obtain the highest possible density of the magnets using a small-scale desktop material extrusion printer. Large scale integrated additive manufacturing-compression molding (AM-CM) is then utilized to increase the density of the magnets by reducing porosity defects common in the material extrusion process. The density of as-printed magnets was 5.2 g/cm 3 with a BH max value of 124.14 kJ/m 3 , tensile strength of 20 MPa and a modulus of 2 GPa. AM-CM increased the density of the compound by 5.5 % (5.49 g/cm 3 ). The reduction in porosity was confirmed using X-ray tomography (XCT). Improvement in mechanical strength of the material was also observed, with an increase in tensile strength of 25 % (25.09 MPa) and increase in tensile modulus of 275 % (5.49 GPa). Scanning electron microscopy showed increased particle-matrix adhesion with the integrated AM-CM process.

36 MATERIALS SCIENCE↗

High-performance molded composites using additively manufactured preforms with controlled fiber and pore morphology

Here, large-scale multimaterial preforms produced by additive manufacturing (AM) underwent compression molding (CM) to produce high-performance thermoplastic composites reinforced with short carbon fibers. AM and CM techniques were integrated to control the fiber orientation (microstructure) and to reduce void content for the improved mechanical performance of the composite. The new integrated manufacturing technique is termed “additive manufacturing-compression molding” (AM-CM). For the present study, the most common materials were used for large-scale printing, i.e., acrylonitrile butadiene styrene (ABS), carbon fiber (CF)–filled ABS (CF/ABS) and glass fiber (GF)–filled ABS (GF/ABS). Three different manufacturing processes; (a) AM (b) extrusion compression molding (ECM), and (c) AM-CM were used to prepare four different panel configurations: (1) neat ABS, (2) CF/ABS, (3) overmold (CF/ABS over neat ABS), and (4) sandwich (neat ABS between two CF/ABS layers). The mechanical properties (tensile and flexural strength and modulus, and Izod impact energy) of samples prepared via all three manufacturing processes were compared. X-ray microcomputer tomography was employed to evaluate the fiber orientation distribution and the volumetric porosity content. The preform maintained high fiber alignment (≈ 82% of fibers within the range of 0–20° in the deposition direction), and the volumetric porosity was reduced by 50% from 3.79% to 1.91% after compression. The alignment of long pores along the deposition direction was also observed. The mechanical properties are discussed with correlation to the fiber alignment and void content in the samples. CF/ABS samples prepared by AM-CM showed significant improvement of 11.15%, 35.27%, 28.6%, and 74.3% in the tensile strength, tensile modulus, flexural strength, and flexural modulus, respectively, when compared with samples prepared by ECM. Unique aspects of this study are the demonstration of large-scale multimaterial AM and the use of multimaterials as preforms to make high-performance composites.

36 MATERIALS SCIENCE↗

Impact of hydrogen bonding pendant groups in polymer grafted nanoparticles on interlayer adhesion and mechanical properties in material extrusion printing

The addition of nanoparticles or copolymer grafted nanoparticles (CPGNPs) to polymeric matrices greatly improves thermomechanical properties of the resulting nanocomposite, but corresponding studies of nanocomposite systems created by 3D printing are few, especially in the realm of functional polymeric materials. Here we describe how silica nanoparticle-grafted, random copolymers of poly(methyl methacrylate-random-2-uriedo-[1H]-pyrimidinone methacrylate) (P(MMA-r-UPyMA) dramatically increases the mechanical properties of poly(methyl methacrylate) (PMMA) based nanocomposite specimens created by melt extrusion printing. Most notably, when these novel CPGNPs are combined with PMMA matrix chains via a solution-based process, printed specimens containing only 0.5 wt% additive show significant increases in Young’s modulus (90%), storage modulus (93%), tensile modulus (148%) and ultimate tensile strength (110%). These improvements are ascribed to strengthening of adhesion across interfaces due to multi-point hydrogen bonding between UPyMA groups, the reinforcement effect of the P(MMA-r-UPyMA)-grafted silica nanoparticles, as well as hydrogen bonding interactions and entanglements between graft and matrix chains. Imaging of fracture surfaces after tensile testing reveals that in comparison to nanocomposites created by simple mechanical mixing of solids, the solution-casting process improves the dispersion of nanoparticles and reduces the void spaces between printed roads. These studies demonstrate that introducing functionality into polymer grafts, such as hydrogen bonding interactions, and intimate mixing of polymer-modified nanomaterials can greatly improve interlayer adhesion and mechanical properties, thereby advancing this method of polymer additive manufacturing

36 MATERIALS SCIENCE↗

Distributed strain sensing using Bi-metallic coated fiber optic sensors embedded in stainless steel

Silica fiber optic sensors are resistant to corrosive environments and high temperatures, making them attractive candidates for harsh conditions found in nuclear and aerospace industries. Moreover, fibers can be deployed remotely for continuous measuring of spatially distributed temperatures and strains. Here, this study investigated embedding a Ni/Cu bi-metallic coated fiber in a stainless-steel 316 (SS316) matrix using laser powder bed fusion towards functionalizing metal components for site-specific health monitoring. The embedded fiber was continuously interrogated during controlled heating to 1000°C. The measured fiber strains were similar to the expected differential thermal strains between the fiber and the SS316 matrix, until divergent behavior was observed at temperatures >500°C. No debonding at the matrix–coating–fiber interfaces was observed during microscopy, but significant interactions between the coatings and matrix resulted in diffusion-driven chemistry variations and Kirkendall void formation. Applying the strain-lag theory revealed plastic behavior in the Ni coating at temperatures >500°C, limiting the strain transfer to the fiber at higher temperatures. It was estimated that the elastic modulus in the Ni coating had decreased from ~200 GPa at room temperature to below 40 GPa, starting at 600°C. The low elastic modulus above 600°C is within the margin of what the tangent modulus would be in the case of bilinear isotropic hardening. Regardless of the divergent strain transfer at higher temperatures, the fiber was exposed to the equivalent of 1.9 % engineering strain at 1000°C, but measured only a 0.7 % engineering strain due to the poor strain transfer. Although compensating for the plastic behavior of Ni proved challenging, the bonding of a brittle silica fiber to a metal matrix surviving to 1000°C invites potential iterations on coating material for future application. For example, the embedded fiber is sufficient for acoustic energy transfer, realizing high temperature distributed acoustic sensing.

36 MATERIALS SCIENCE↗