Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICS LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Initiation and Detonation Physics on Millimeter Scales

The LLNL Detonation Science Project has a major interest in understanding the physics of detonation on a millimeter scale. This report summarizes the rate stick experiment results of two high explosives. The GO/NO-GO threshold between varying diameters of ultra-fine TATB (ufTATB) and LX-16 were recorded on an electronic streak camera and analyzed. This report summarizes the failure diameters of rate sticks for ufTATB and LX-16. Failure diameter for the ufTATB explosive, with densities at 1.80 g/cc, begin at 2.34 mm (not maintaining detonation velocity over the entire length of the rate stick). ufTATB rate sticks at the larger 3.18 mm diameter maintain a constant detonation velocity over the complete length. The PETN based and LLNL developed explosive, LX-16, with densities at 1.7 g/cc, shows detonation failure between 0.318 mm and 0.365 mm. Additional tests would be required to narrow this failure diameter further. Many of the tested rate sticks were machined using a femtosecond laser focused into a firing tank - in case of accidental detonation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Fusion Pilot Plant and ITER Scenarios and Control

The principal goals of this project were to develop key physics understandings and control solutions necessary for the realization of a steady-state fusion reactor by adapting high performance plasma scenarios from DIII-D to long pulse operation on the Experimental Advanced Superconducting Tokamak (EAST) in Hefei, China. Specific research objectives include the development of physics and control solutions necessary for demonstrating disruption-free long-pulse plasmas at high physics performance sustained simultaneously with the capability of handling the plasma exhaust and plasma-wall interactions using reactor-relevant materials surrounding the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laboratory for Nuclear Science. High Energy Physics Program

High energy and nuclear physics research at MIT is conducted within the Laboratory for Nuclear Science (LNS). Almost half of the faculty in the MIT Physics Department carry out research in LNS at the theoretical and experimental frontiers of subatomic physics. Since 2004, the U.S. Department of Energy has funded the high energy physics research program through grant DE-FG02-05ER41360 (other grants and cooperative agreements provided decades of support prior to 2004). The Director of LNS serves as PI. The grant supports the research of four groups within LNS as “tasks” within the umbrella grant. Brief descriptions of each group are given here. A more detailed report from each task follows in later sections. Although grant DE-FG02-05ER41360 has ended, DOE continues to fund LNS high energy physics research through five separate grants (a research grant for each of the four groups, as well as a grant for AMS Operations). We are pleased to continue this longstanding partnership.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The impact of aqueous medium on zeolite framework integrity

Understanding the zeolite framework stability in aqueous phase is crucial to develop stable catalysts. Al K–edge, extended X–ray absorption fine structure and 27Al MAS NMR spectroscopies in combination with DFT calculations have been used to monitor both qualitative and quantitative structural changes of two well–characterized samples with BEA structure. The effects of various properties on stability were explored, including Al concentration, Al distribution, particle size and structural defects. As the samples were degraded by treatment in hot liquid water, the local structure about the Al T–site remained mostly intact, including the Al–O–Si angles and bond distances, while the nano–scale crystalline structure as measured by XRD and TEM was disrupted. The combined data suggest a three–step mechanism in which, initially, the HBEA framework crystallinity decreases via hydrolysis of T–O bonds along polymorph stacking faults and inter–grain boundaries in a mode similar to crack propagation in glass. With prolonged exposure, amorphization occurs via hydrolysis of surface Si–OH groups propagating inward through the zeolite lattice. In parallel, cracks propagate within the crystalline micro–domains along paths through specific T–O–T groups. Authors thank B. W. Arey (PNNL) for HIM measurements, T. Huthwelker for support during Al XAFS measurements at the Swiss Light Source (PSI, Switzerland) and M. Y. Hu (PNNL) for support during NMR experiments. This work was supported by the U. S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. NMR experiments were performed at the Environmental Molecular Science Laboratory, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research, and Physical Science Laboratory both located at Pacific Northwest National Laboratory (PNNL). PNNL is a multi–program national laboratory operated for DOE by Battelle under Contract No. DE–AC05–76RL01830.

Environmental Molecular Sciences Laboratory↗

Physical and Life Sciences 2008 Science & Technology Highlights

This document highlights the outstanding research and development activities in the Physical and Life Sciences Directorate that made news in 2008. It also summarizes the awards and recognition received by members of the Directorate in 2008.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Science and Technology Challenges for International Safeguards

The science and technology challenges for international safeguards range from cutting edge physics needs to practical technology solutions for high volume data handling and analysis issues. This paper will take a narrow look at some of the predominant challenges, which include those at high throughput commercial facilities and those in the detection of undeclared facilities. It is hoped that by highlighting these areas it can encourage a concerted effort by scientific institutions and industry to provide robust cost-effective solutions.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Energy-momentum-conserving stochastic differential equations and algorithms for the nonlinear Landau-Fokker-Planck equation

Coulomb collision is a fundamental diffusion process in plasmas that can be described by the Landau-Fokker-Planck (LFP) equation or the stochastic differential equation (SDE). While energy and momentum are conserved exactly in the LFP equation, they are conserved only on average by the conventional corresponding SDEs, suggesting that the underlying stochastic process may not be well defined by such SDEs. Here, in this study, we derive new SDEs with exact energy-momentum conservation for the Coulomb collision by factorizing the collective effect of field particles into individual particles and enforcing Newton's third law. These SDEs, when interpreted in the Stratonovich sense, have a particularly simple form that represents pure diffusion between particles without drag. To demonstrate that the new SDEs correspond to the LFP equation, we develop numerical algorithms that converge to the SDEs and preserve discrete conservation laws. Simulation results are presented in a benchmark of various relaxation processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axisymmetric Eigenmodes Excited by Alpha Particle Energy Gradients in JET D-T Plasmas

Axisymmetric Alfvén eigenmodes have been observed at the plasma edge in deuterium-tritium (D-T) tokamak plasmas externally heated only by neutral beam injection in JET. The modes were detected only in D-T plasmas, not in pure D plasmas, indicating excitation by fusion-born 𝛼 particles. The presence of the axisymmetric mode suggests that the modes were driven by positive energy gradients in the 𝛼 particle distribution rather than radial gradients. The modes are driven by counter-current passing 𝛼 particles with large orbit widths, allowing core-born 𝛼 particles to interact with modes at the plasma edge. This reveals an excitation mechanism arising from positive energy gradients produced by the minimum energy required to confine particles at the edge, relevant to all burning plasmas.

Oliver, H. J. C. [United Kingdom Atomic Energy Aut↗

Predictive outlook for experiments resolving prompt vs local redeposition of high- Z materials in tokamaks

High-Z plasma facing components redeposit within the sheath through a combination of two distinct mechanisms: prompt (or geometric-driven) and local (or sheath-driven) redeposition. Experimental efforts are needed to determine the leading-order parameters influencing prompt-vs-local trade-off, which sets the fraction of material entering the scrape-off layer. In preparation for such experiments, leading-order parameters are isolated within the PYEAD-RustBCA-GITR coupled net erosion code using Sobol’ sensitivity analysis. Then, experiments resolving prompt-vs-local trade-off under variation of these leading-order parameters are proposed using an isotopic coupon design with multifaceted diagnostic coverage. The measurability of these experiments is evaluated using synthetic diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER [A. Wingen et al, Nucl. Fusion 64, 066015(2024)]. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The HotQCD Equation of State

We present results from recent calculations of the QCD equation of state by the HotQCD Collaboration and review the implications for hydrodynamic modeling. The equation of state of QCD at zero baryon density was calculated on a lattice of dimensions 32{sup 3} x 8 with m{sub l} = 0.1 m{sub s} (corresponding to a pion mass of {approx}220 MeV) using two improved staggered fermion actions, p4 and asqtad. Calculations were performed along lines of constant physics using more than 100M cpu-hours on BG/L supercomputers at LLNL, NYBlue, and SDSC. We present parameterizations of the equation of state suitable for input into hydrodynamics models of heavy ion collisions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of insulator end cap thickness on time-dependent Hartmann flow in a rotating mirror

We present a framework for analysing plasma flow in a rotating mirror. By making a series of physical assumptions, we reduce the magnetohydrodynamic (MHD) equations in a three-dimensional cylindrical system to a one-dimensional system in a shallow, cuboidal channel within a transverse magnetic field, similar to the Hartmann flow in ducts. We then solve the system both numerically and analytically for a range of values of the Hartmann number and calculate the dependence of the plasma flow speed on the thickness of the insulating end cap. We observe that the mean flow overshoots and decelerates before achieving a steady-state value, a phenomenon that the analytical model cannot capture. This overshoot is directly proportional to the thickness of the insulating end cap and the external electric field, with a weak dependence on the external magnetic field. Our simplified model can act as a benchmark for future simulations of the supersonic mirror device CMFX (centrifugal magnetic fusion experiment), which will employ more sophisticated physics and realistic magnetic field geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metastability of stratified magnetohydrostatic equilibria and their relaxation

Motivated by explosive releases of energy in fusion, space and astrophysical plasmas, we consider the nonlinear stability of stratified magnetohydrodynamic equilibria against two-dimensional interchanges of straight magnetic-flux tubes. We demonstrate that, even within this restricted class of dynamics, the linear stability of an equilibrium does not guarantee its nonlinear stability: equilibria can be metastable. We show that the minimum-energy state accessible to a metastable equilibrium under non-diffusive two-dimensional dynamics can be found by solving a combinatorial optimisation problem. These minimum-energy states are, to good approximation, the final states reached by our simulations of destabilised metastable equilibria for which turbulent mixing is suppressed by viscosity. To predict the result of fully turbulent relaxation, we construct a statistical mechanical theory based on the maximisation of Boltzmann's mixing entropy. This theory is analogous to the Lynden-Bell statistical mechanics of collisionless stellar systems and plasma, and to the Robert–Sommeria–Miller theory of two-dimensional vortex turbulence. Our theory reproduces well the results of our numerical simulations for sufficiently large perturbations to the metastable equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression of the collisionless tearing mode by flow shear: implications for reconnection onset in the Alfvénic solar wind

We analyse the collisionless tearing mode instability of a current sheet with a strong shear flow across the layer. The growth rate decreases with increasing shear flow, and is completely stabilised as the shear flow becomes Alfvénic. We also show that, in the presence of strong flow shear, the tearing mode growth rate decreases with increasing background ion-to-electron temperature ratio, the opposite behaviour to the tearing mode without flow shear. We find that even a relatively small flow shear is enough to dramatically alter the scaling behaviour of the mode, because the growth rate is small compared with the shear flow across the ion scales (but large compared with shear flow across the electron scales). Our results may explain the relative absence of reconnection events in the near-Sun Alfvénic solar wind observed recently by NASA’s Parker Solar Probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Cyclotron Heating in a Levitated Dipole Fusion Reactor

OpenStar Technologies is pursuing the levitated dipole (LD) as a highly modular, loosely-coupled system that leverages their expertise in high temperature superconductor (HTS) technology. The next generation experiment at OpenStar, Tahi (Ma¯ori for “first”), will demonstrate the generation and confinement of fast ions in a levitated dipole for the first time. Ion cyclotron range of frequency (ICRF) heating is a leading candidate for energetic ion formation in Tahi. A frequency in the 10 MHz range will be used for H minority heating or D majority heating with waves launched from an antenna located above the floating coil. Unlike a tokamak, where the targeted cyclotron resonance is typically a vertical path through the center of the plasma, in a dipole the resonance location follows a C-shaped path from the separatrix to the center of the plasma. The value of B also varies significantly within the confined plasma resulting in a large number of cyclotron harmonics present in the low field region. Furthermore, levitated dipoles contain a “first closed flux surface” surrounding the floating coil, in addition to the traditional separatrix /last closed flux surface. Simulation e ff orts using full-wave ICRF codes show that ICRF heating of a levitated dipole reactor is feasible using a pair of toroidal current straps phased to launch the appropriate parallel ( i.e. poloidal) refractive index.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An experimental study of the existence regions and non-linear interactions of drift wave and Kelvin–Helmholtz instabilities in a linear magnetized plasma

Experimental observations of the intrinsic excitation and non-linear interactions of drift wave (DW) and Kelvin–Helmholtz (KH) instabilities in a linear magnetized plasma column are presented. The experiments are carried out in the inverse mirror plasma experimental device (IMPED)—a cylindrical, magnetized, linear plasma machine designed to study low-frequency waves and instabilities in plasma. A novel feature of IMPED is the ability to control plasma profiles, such as the density n(r)⁠, electron temperature T e (r)⁠, and plasma potential V p (r) by varying the ratio Rm of the magnetic field in the main chamber to that in the source chamber. At high values of Rm, higher-density gradient scale length promotes the drift wave (DW) instability while lower Rm value results in a higher radial electric field, inducing a sheared poloidal flow that enhances the dominance of the Kelvin–Helmholtz (KH) mode. The background and fluctuating plasma parameters are characterized using various configurations of multiple in situ electric probes at different spatial locations to quantify the local gradients that excite the low-frequency primary instabilities. Statistical, spectral, and bispectral analysis of the density and potential signals help identify these modes in terms of wave number, frequency, phase, and amplitude and also delineate the nature of their non-linear interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Poor confinement in stellarators at high energy II

This work discusses particle resonances in stellarators. There are two important effects. First, resonances provide locations for Alfvén modes, which can cause significant particle loss. Second, if a resonance matches the period of the modulation of the equilibrium field magnitude it produces islands in particle orbits increasing in size with particle energy, also possibly causing loss. A previous publication suffered from a restriction to the consideration of deeply passing particle orbits, clearly showing the resonance islands. Large particle magnetic moment increases the effect of particle cross field drift, essential for this phenomenon, so passing particles with larger values of magnetic moment give larger islands. It is possible to avoid designs exhibiting such resonances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗