Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Observations of an Intermediate Layer During the Coqui II Campaign

NASA sounding rocket 21.114, launched March 7, 1998, during the Coqui II campaign, provided neutral wind and plasma density measurements of a weak intermediate layer. The layer was centered near 140 km and had an approximate peak plasma density of 2200 cc. The measured winds were typically less than 40 m/s, in agreement with wind shear formation theory and coincident density observations. The data obtained during the flight allow us to explore the plasma density structure and wind field morphology of the intermediate layer. Coupled with simultaneous data from Arecibo Observatory, the upleg and downleg density profiles provide three spatially separated measurements that enable the first detailed investigation of the horizontal extent and variation of an intermediate layer.

Bishop, R. L.↗
NASA NTRS1982

Diffusion processes in the magnetopause boundary layer

A quantitative estimate is calculated for the effect of wave-particle scattering on the structure of the magnetopause boundary layer. It is assumed that large cross-B electric fields are absent in the observed penetration of magnetosheath plasma into the magnetopause boundary layer, thus allowing for cross-field transport comparable to 10% of the Bohm diffusion. It is shown that magnetosheath ions, resonant with low frequency electrostatic waves, can account for the typical boundary layer thickness when transported at 10% of the diffusion rate 1000 sq km/sec. The conditions are required to occur at all local times and under all interplanetary conditions. Significant mass and momentum transfer are then possible across the magnetopause when field merging is not occurring.

Tsurutani, B. T.↗
NASA NTRS2001

Plasma and Field Observations at the Day-Side, Equatorial Magnetopause, Boundary Layers and Magnetosphere

The Polar spacecraft's orbit has precessed in latitude to an orientation that places it at the dayside magnetopause every 18 hours. In this configuration the various regions near the magnetopause(LLBL, turbulent boundary layer, magnetosphere, and magnetosheath) are sampled with high temporal and spatial resolution. These observational periods-ranging from several minutes to more than two hours-provide an unprecedented look at plasma conditions in these regions. Initial analysis of the low-energy ion data from TIDE reveal plasmaspheric-like ions within the turbulent boundary layer. Within this layer, circularly polarized waves accelerate these ions to 30-40 kilometers per second perpendicular to the local magnetic field. These relatively high velocities allow the H(+) to be observed above the -2V spacecraft potential. They also put the low-density O(+) in the higher-energy, higher sensitivity channels such that densities of order 10e-2 can be observed.

Chandler, M. O.↗
NASA NTRS1987

Resonance absorption of magnetohydrodynamic surface waves - Viscous effects

The effects of viscosity on the resonance absorption of incompressible MHD surface waves, which occurs when the waves are supported by a thin 'transition layer' rather than by a discontinuous surface, are considered. The behavior of the plasma and fields inside the transition layer is considered, allowing for classical viscosity. An inhomogeneous Airy equation for the velocity component along the propagative direction is obtained in the vicinity of the resonant field line. The viscous stress tensor for a magnetized plasma is considered, and a simple algebraic steady state equation is obtained for the velocity component along the background magnetic field. The net heating rate is evaluated and found to be independent of the viscosity coefficient, and to correspond to the surface wave 'decay rate' obtained from ideal MHD equations.

Hollweg, Joseph V.↗
NASA NTRS1982

Reverse draping of magnetic field lines in the boundary layer

An unexpected orientation of field lines has been found by ISEE satellite measurements of the earth magnetosphere boundary layer, perhaps indicating a reverse draping. Three-dimensional plasma flow measurements by ISEE 1 and 2 show the tailward flow in the boundary layer to have an equatorward component which suggests high-latitude plasma entry. Simultaneous magnetic field measurements with the two satellites during a boundary crossing sequence yielded data on the boundary layer electric currents and the boundary layer interface with plasma sheet and magnetosheath. The currents are found to be largely field-aligned, with intensities in the 0.03-0.06 microampere/sq m range.

Hones, E. W., Jr.↗
DOE OSTI2020

Characterization of the Benefit of APS Flash Coatings in Improving TBC Lifetime

The addition of an air plasma sprayed (APS) “flash” layer on top of a high velocity oxygen fuel (HVOF) bond coating has been shown to extend the lifetime of thermal barrier coatings. A series of furnace cycle tests (FCTs) has been conducted at 1100 °C in air + 10% H 2 O to study the benefit of flash coatings on rod and disk alloy 247 specimens and provide a better mechanistic understanding of their benefit. Flash coatings of NiCoCrAlY and NiCoCrAlYHfSi both improved the FCT lifetime of rod specimens tested in 100-h cycles and disk specimens tested in 1-h cycles. In 1-h cycles, the NiCoCrAlY flash coating significantly outperformed an HVOF-only NiCoCrAlYHfSi bond coating and a NiCoCrAlYHfSi flash coating. Both flash coatings increased the bond coating roughness compared to HVOF. During exposure, the flash layer formed an intermixed alumina-metal layer that appeared to inhibit crack formation. Using a time series of observations, the lower Y + Hf content in the Y-only flash coating appeared to reduce Al consumption. The HVOF layer acted as a source of Al for the adjacent mixed zone. A second series of specimens included a fully APS bond coating where oxide had penetrated through the entire coating to the substrate after only 100, 1-h cycles and lifetime was similar to an HVOF-only bond coating. The inner HVOF layer with the outer APS flash coating prevented this complete penetration from occurring.

Pint, Bruce↗
DOE OSTI2024

CH 3 Radical Generation in Microplasmas for Up-Conversion of Methane

The conversion of methane, CH 4 , into higher value chemicals using low temperature plasmas is challenged by both improving efficiency and selectivity. One path towards selectivity is capturing plasma produced methyl radicals, CH 3 , in a solvent for aqueous processing. Due to the rapid reactions of methyl radicals in the gas phase, the transport distance from production of the CH 3 to its solvation should be short, which then motivates the use of microplasmas. The generation of CH 3 in Ar/CH 4 /H 2 O plasmas produced in nanosecond pulsed dielectric barrier discharge microplasmas is discussed using results from a computational investigation. The microplasma is sustained in the channel of a microfluidic chip in which the solvent flows along one wall or in droplets. CH 3 is primarily produced by electron-impact of and dissociative excitation transfer to CH 4 , as well as CH 2 reacting with CH 4 . CH 3 is rapidly consumed to form C 2 H 6 which, in spite of being subject to these same dissociative processes, accumulates over time, as do other stable products including C 3 H 8 and CH 3 OH. The gas mixture and electrical properties were varied to assess their effects on CH 3 production. CH 3 production is largest with 5% CH 4 in the Ar/CH 4 /H 2 O mixture due to an optimal balance of electron-impact dissociation, which increases with CH 4 percentage, and dissociative excitation transfer and CH 2 reacting with CH 4 , which decrease with CH 4 percentage. Design parameters of the microchannels were also investigated. Increasing the permittivity of the dielectrics in contact with the plasma increased the ionization wave intensity which increased CH 3 production. Increased energy deposition per pulse generally increased CH 3 production as does lengthening pulse length up to a certain point. The arrangement of the solvent flow in the microchannel can also affect the CH 3 density and fluence to the solvent. The fluence of CH 3 to the liquid solvent is increased if the liquid is immersed in the plasma as a droplet or is a layer on the wall where the ionization wave terminates. The solvation dynamics of CH 3 with varying numbers of droplets was also examined. Here, the maximum density of solvated methyl radicals CH 3aq occurs with a large number of droplets in the plasma. However, the solvated CH 3aq density can rapidly decrease due to desolvation, emphasizing the need to quickly react the solvated species in the solvent.

03 NATURAL GAS↗
DOE OSTI2021

First application of a digital mirror Langmuir probe for real-time plasma diagnosis

We report for the first time, a digital Mirror Langmuir Probe (MLP) has successfully sampled plasma temperature, ion saturation current, and floating potential together on a single probe tip in real time in a radio-frequency driven helicon linear plasma device. This is accomplished by feedback control of the bias sweep to ensure a good fit to I–V characteristics with a high frequency, high power digital amplifier, and field-programmable gate array controller. Measurements taken by the MLP were validated by a low speed I–V characteristic manually collected during static plasma conditions. Plasma fluctuations, induced by varying the axial magnetic field($\widetilde{f}$ = 10 Hz), were also successfully monitored with the MLP. Further refinement of the digital MLP pushes it toward a turn-key system that minimizes the time to deployment and lessens the learning curve, positioning the digital MLP as a capable diagnostic for the study of low radio-frequency plasma physics. These demonstrations bolster confidence in fielding such digital MLP diagnostics in magnetic confinement experiments with high spatial and adequate temporal resolution, such as edge plasma, scrape-off layer, and divertor probes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Absolute electron density fluctuation reconstruction for two-dimensional hydrogen beam emission spectroscopy

Scrape-off layer (SOL) and edge plasma turbulence significantly contribute to the radial particle and heat transport, lowering the plasma confinement and increasing the heat load on the plasma facing components. SOL turbulence is predominantly intermittent, which manifests in the occurrence of isolated density filaments or blobs. Filaments propagate radially outward toward plasma facing components, limiting their lifetime by erosion and sputtering. To characterize this phenomenon in detail, few diagnostic techniques are available. Beam emission spectroscopy is a diagnostic capable of measuring plasma turbulence in both SOL and edge plasmas. Due to the finite lifetime of the excitation states during the beam–plasma interaction and the misalignment between the optics and the magnetic field, spatial smearing is introduced in the measurement. In this paper, a novel method is introduced to overcome this hindering effect by inverting the fluctuation response matrix on an optimally smoothed signal. We show that this method is fast and provides significantly more accurate absolute density fluctuation reconstruction than the direct inversion technique. Here, the presented method is usable for all types of beam emission diagnostics where the spatial resolution is higher than the combined smearing of the atomic physics and the observation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Boundary, SOL, and Divertor Physics Studies on TCV (Final Report for Research Funded by DoE Award DE-SC0020327)

Research supported under this grant was organized around two diagnostic systems installed on the TCV tokamak located at EPFL in Lausanne, Switzerland: Multi-Spectral Imaging (MSI) and Gas-Puff Imaging (GPI). MSI monitors 2-d time-history images of up to 10 spectral lines, in the visible, using identical views for all wavelengths. The primary application of MSI is to infer 2-d time histories of electron temperature and density in the Scrape-Off-Layer (SOL) of diverted plasmas, utilizing ratios of emission from multiple neutral helium lines. The atomic models are validated against 1-d Thomson scattering measurements. SOL density and temperature maps are analyzed to infer divertor dynamics, including particle and power flows, for a variety of divertor configurations, and specifically as flux expansion along the long-legged outboard divertor is systematically varied. GPI is used to measure details of edge fluctuations in the SOL, particularly as a function of plasma triangularity (δ), including both positive and negative δ. A threshold is found, whereby for δ<-0.3, edge turbulence in the far SOL is completely suppressed. Dynamics of the filamentary turbulence was also analyzed using advance machine learning techniques. Research in support of four PhD theses was carried out within the scope of this Award, including 2 at MIT and 2 at EPFL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Kinetic Simulations of Radiative Magnetic Reconnection in the Coronae of Accreting Black Holes

We perform 2D and 3D particle-in-cell simulations of reconnection in magnetically dominated e ± plasmas subject to strong Compton cooling. Magnetic reconnection under such conditions can operate in accretion disk coronae around black holes, which produce hard X-rays through Comptonization. Our simulations show that most of the plasma in the reconnection layer is kept cold by Compton losses and locked in magnetically dominated plasmoids with a small thermal pressure. Compton drag clears cavities inside plasmoids and also affects their bulk motions. These effects, however, weakly change the reconnection rate and the plasmoid size distribution from those in nonradiative reconnection. This demonstrates that the reconnection dynamics is governed by similar magnetic stresses in both cases and weakly affected by thermal pressure. We examine the energy distribution of particles energized by radiative reconnection and observe two distinct components: (1) A mildly relativistic peak, which results from bulk motions of cooled plasmoids. This component receives most of the dissipated reconnection power and dominates the output X-ray emission. The peak has a quasi-Maxwellian shape with an effective temperature of ~100 keV. Thus, it mimics thermal Comptonization used previously to fit hard-state spectra of accreting black holes. (2) A high-energy tail, which receives ~20% of the dissipated reconnection power. It is populated by particles accelerated impulsively at X-points or "picked up" by fast outflows from X-points. The high-energy particles immediately cool, and their inverse Compton emission explains the MeV spectral tail detected in the hard state of Cyg X-1. Our first-principle simulations support magnetic reconnection as a mechanism powering hard X-ray emission from magnetically dominated regions of accreting black holes.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1982

Fully plasma-sprayed compliant backed ceramic turbine seal

A seal having a high temperature abradable lining material encircling the tips of turbine blades in turbomachinery is discussed. The minimum operating clearances between the blade tips and the lining of a high pressure turbine are maintained. A low temperature easily decomposable material, such as a polymer, in powder form is blended with a high temperature oxidation resistant metal powder. The two materials are simultaneously deposited on a substrate formed by the turbine casing. Alternately, the polymer powder may be added to the metal powder during plasma spraying. A ceramic layer is then deposited directly onto the metal polymer composite. The polymer additive mixed with the metal is then completely volatilized to provide a porous layer between the ceramic layer and the substrate.

Bill, R. C.↗
NASA NTRS1985

Plasmas in the earth's magnetotail

An overview of the general charcteristics of plasmas within the earth's magnetotail and its environs is presented. Present knowledge of the plasma within these regions as gained via in situ measurements provides the general theme, although observations of magnetic fields, energetic particles and plasma waves are included in the discussion. Primary plasma regimes in the magnetotail are the plasma sheet, its boundary layer, the magnetotail lobes, the boundary layer at the magnetopause and the distant magnetotail. Although great progress in the understanding of these regions is evident in the literature of the past several years, many of their features remain as exciting enigmas to be resolved by future observational and theoretical investigation.

Frank, L. A.↗
NASA NTRS1988

Resonant geomagnetic field oscillations and Birkeland currents in the morning sector

The relationship between large-scale Birkeland currents and resonant oscillations of the geomagnetic field is investigated on the basis of Viking magnetic-field, electric-field, and particle measurements and AMPTE-CEE and IMP-8 magnetic-field measurements obtained during April 23-25, 1986. The data are presented in extensive graphs and characterized in detail. The 3-16-mHz 5-60-nT magnetic-field oscillations detected by Viking are also seen by AMPTE-CEE below L = 8.8 and extend from the lower L shells to the boundary between regions 1 and 2 of the Birkeland-current system, and this boundary is shown to be closely related to the interface between the low-latitude boundary layer and the central plasma sheet. It is suggested that the magnetospheric oscillations may be driven by several different solar-wind features, possibly depending on the direction of the IMF.

Potemra, T. A.↗
NASA NTRS1989

A model of electron collecting plasma contractors

A model of plasma contractors is being developed, which can be used to describe electron collection in a laboratory test tank and in the space environment. To validate the model development, laboratory experiments are conducted in which the source plasma is separated from the background plasma by a double layer. Model calculations show that an increase in ionization rate with potential produces a steep rise in collected current with increasing potential.

Davis, V. A.↗
NASA NTRS1989

Instrumented adhesion tests on plasma sprayed thermal barrier coatings

The failure mechanisms of plasma-sprayed two-layer coatings consisting of an NiCrAlY or NiCrAlZr bond coat with an yttria-stabilized zirconia overlay are presently examined by tensile adhesion tests. It has been found that adhesive failure within the bond coat exhibits greater failure strain than the cohesive failure of the ceramic overlay, supporting the view of the intermediate coatings being highly compliant. The absolute extension exhibited by failures occurring only through the ceramic coating is greater than that of adhesive failure, since the ceramic coating is much thicker than the bond coat.

Berndt, Christopher C.↗