Search NASA⌕ Search

SEARCH · Search NASA

Results for “POWER FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Thermoelectric and mechanical properties on misch metal filled p-type skutterudites Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12}

Most of the recent work focused on improving the dimensionless figure-of-merit, ZT, of p-type skutterudites uses one or two fillers to tune the electrical and thermal properties. Considering the fact that the different fillers with varying atomic mass and ionic radii can vibrate with different amplitudes to scatter phonons of different mean free paths, we synthesized misch metal filled p-type skutterudites Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12} (where Mm is La{sub 0.25}Ce{sub 0.5}Pr{sub 0.05}Nd{sub 0.15}Fe{sub 0.03}, called misch metal). The samples were synthesized by hot pressing nano-powder made by ball milling the annealed ingot of Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12} with varying concentration of cobalt, x. By tuning the Fe/Co ratio, we achieved a thermal conductivity of ∼2 W m{sup −1} K{sup −1} at room temperature and ∼2.3 W m{sup −1} K{sup −1} at about 530 °C and a power factor of ∼30 μW cm{sup −1} K{sup −2} at about 425 °C in Mm{sub 0.9}Fe{sub 3.1}Co{sub 0.9}Sb{sub 12}, leading to a peak ZT ∼1.1 at about 425 °C. The nano-indentation experiment reveals that hardness and elastic modulus of the material is about 4.2 GPa and 116 GPa, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal energy harvesting for large-scale applications using MWCNT-grafted glass fibers and polycarbonate-MWCNT nanocomposites

The thermoelectric properties of multi-wall carbon nanotube (MWCNT) -grafted glass fiber yarns (GF-CNT) and their epoxy model composites, as well as of polymer nanocomposites consisting of a polycarbonate (PC) matrix filled with differently functionalized MWCNTs have been examined. The GF-CNT hierarchical multi-scale structures were prepared by dip coating glass fiber yarns in a solution of carbonyl chloride modified MWCNTs; MWCNT-COCl (at a concentration of 0.5 mg/ml) under Ar atmosphere. The resulting GF-CNT exhibited high electrical conductivity (σ = 2.1×10{sup 3} S/m) due to the dense MWCNT deposited networks. The fiber surface morphology was investigated by scanning electron microscopy (SEM). The GF-CNT showed Seebeck coefficient (S); S = 16.8 μV/K, and power factor (P.F); P.F = 0.59 μW/mK−2. The high electrical conductivity of the GF-CNT is a key parameter for an optimum thermoelectric performance, since it can facilitate the flow of the thermally induced charge carriers upon being exposed to a temperature gradient. Polycarbonate/MWCNT nanocomposites were prepared by small-scale melt-mixing process using a microcompounder. Unfunctionalized, carboxyl (-COOH) and hydroxyl (-OH) modified MWCNTs were incorporated in PC at a constant amount of 2.5 wt.%, concentration above the electrical percolation threshold. The amount of MWCNTs was kept low to understand the fundamental aspects of their physical properties and their correlation to the composite morphology, as revealed by transmission electron microscopy (TEM). It was found that different functional groups can affect the thermoelectric performance and the conductivity of the nanocomposites. Namely, the highest Seebeck coefficient (S) was found for the composite containing carboxyl functionalized MWCNTs (11.3 μV/K), due to the highest oxygen content of MWCNTs proven by X-Ray Photoelectron spectroscopy (XPS). It is believed that MWCNT-grafted glass fibers as reinforcements in composite structural materials and PC/MWCNT nanocomposites are ideal candidates for large-scale thermal energy harvesting. However, the thermoelectric values are still too low for commercial applications and in the future could be enhanced as will be discussed in this work.

36 MATERIALS SCIENCE↗

Interference enhanced thermoelectricity in quinoid type structures

Quantum interference (QI) effects in molecular junctions may be used to obtain large thermoelectric responses. We study the electrical conductance G and the thermoelectric response of a series of molecules featuring a quinoid core using density functional theory, as well as a semi-empirical interacting model Hamiltonian describing the π-system of the molecule which we treat in the GW approximation. Molecules with a quinoid type structure are shown to have two distinct destructive QI features close to the frontier orbital energies. These manifest themselves as two dips in the transmission, that remain separated, even when either electron donating or withdrawing side groups are added. We find that the position of the dips in the transmission and the frontier molecular levels can be chemically controlled by varying the electron donating or withdrawing character of the side groups as well as the conjugation length inside the molecule. This feature results in a very high thermoelectric power factor S{sup 2}G and figure of merit ZT, where S is the Seebeck coefficient, making quinoid type molecules potential candidates for efficient thermoelectric devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable thermoelectric transport in nanomeshes via elastic strain engineering

Recent experimental explorations of silicon nanomeshes have shown that the unique metastructures exhibit reduced thermal conductivity while preserving bulk electrical conductivity via feature sizes between relevant phonon and electron mean free paths, aiding in the continued promise that nanometer-scale engineering may further enhance thermoelectric behavior. Here, we introduce a strategy for tuning thermoelectric transport phenomena in semiconductor nanomeshes via heterogeneous elastic strain engineering, using silicon as a model material for demonstration of the concept. By combining analytical models for electron mobility in uniformly stressed silicon with finite element analysis of strained silicon nanomeshes in a lumped physical model, we show that the nonuniform and multiaxial strain fields defined by the nanomesh geometry give rise to spatially varying band shifts and warping, which in aggregate accelerate electron transport along directions of applied stress. This allows for global electrical conductivity and Seebeck enhancements beyond those of homogenous samples under equivalent far-field stresses, ultimately increasing thermoelectric power factor nearly 50% over unstrained samples. The proposed concept and structures—generic to a wide class of materials with large dynamic ranges of elastic strain in nanoscale volumes—may enable a new pathway for active and tunable control of transport properties relevant to waste heat scavenging and thermal management.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric properties of binary LnN (Ln=La and Lu): First principles study

First principles density functional calculations were carried out to study the electronic structure and thermoelectric properties of LnN (Ln = La and Lu) using the full potential linearized augmented plane wave (FP-LAPW) method. The thermoelectric properties were calculated by solving the Boltzmann transport equation within the constant relaxation time approximation. The obtained lattice parameters are in good agreement with the available experimental and other theoretical results. The calculated band gaps using the Tran-Blaha modified Becke-Johnson potential (TB-mBJ), of both compounds are in good agreement with the available experimental values. Thermoelectric properties like thermopower (S), electrical conductivity scaled by relaxation time (σ/τ) and power-factor (S{sup 2}σ/τ) are calculated as functions of the carrier concentration and temperature for both compounds. The calculated thermoelectric properties are compared with the available experimental results of the similar material ScN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic cooling using thermoelectric devices

Thermoelectric coolers or Peltier coolers are used to pump heat in the opposite direction of the natural heat flux. These coolers have also been proposed for electronic cooling, wherein the aim is to pump heat in the natural heat flux direction and from hot spots to the colder ambient temperature. In this manuscript, we show that for such applications, one needs to use thermoelectric materials with large thermal conductivity and large power factor, instead of the traditionally used high ZT thermoelectric materials. We further show that with the known thermoelectric materials, the active cooling cannot compete with passive cooling, and one needs to explore a new set of materials to provide a cooling solution better than a regular copper heat sink. We propose a set of materials and directions for exploring possible materials candidates suitable for electronic cooling. Finally, to achieve maximum cooling, we propose to use thermoelectric elements as fins attached to copper blocks.

42 ENGINEERING↗

Thermoelectric properties of fully hydrogenated graphene: Semi-classical Boltzmann theory

Based on the calculated band structure, the electronic transport coefficients of chair-/boat-like graphane were evaluated by using the semi-classical Boltzmann theory and rigid band model. The maximum value of electrical conductivity for chair (boat)-like graphane of about 1.4 (0.6) × 10{sup 19} (Ωms){sup −1} is achieved at 600 K. The charge carrier concentration and the electrical conductivity linearly increase with increasing the temperature in agreement with the experimental work for graphene. The investigated materials exhibit the highest value of Seebeck coefficient at 300 K. We should emphasize that in the chemical potential between ∓0.125 μ(eV) the investigated materials exhibit minimum value of electronic thermal conductivity, therefore, maximum efficiency. As the temperature increases, the electronic thermal conductivity increases exponentially, in agreement with the experimental data of graphene. We also calculated the power factor of chair-/boat-like graphane at 300 and 600 K as a function of chemical potential between ∓0.25 μ(eV)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical/thermal transport and electronic structure of the binary cobalt pnictides CoPn{sub 2} (Pn = As and Sb)

We demonstrate the electrical and thermal transport properties of polycrystalline CoPn{sub 2} (Pn = As and Sb) between 300 and 900 K. CoAs{sub 2} shows semiconducting electrical transport up to 900 K, while CoSb{sub 2} exhibits degenerate conduction. Sign inversion of the Seebeck coefficient is observed at ∼310 and ∼400 K for CoAs{sub 2} and CoSb{sub 2}, respectively. Thermal conductivity at 300 K is 11.7 Wm{sup −1}K{sup −1} for CoAs{sub 2} and 9.4 Wm{sup −1}K{sup −1} for CoSb{sub 2}. The thermoelectric power factor of CoAs{sub 2} is ∼10 μWcm{sup −1}K{sup −2}, although the dimensionless figure of merit is limited to ∼0.1 due to relatively high thermal conductivity. Using electronic structure calculations, the band gap value is calculated to be 0.55 eV for CoAs{sub 2} and 0.26 eV for CoSb{sub 2}.

36 MATERIALS SCIENCE↗

Thermoelectric properties of In-rich InGaN and InN/InGaN superlattices

The thermoelectric properties of n-type InGaN alloys with high In-content and InN/InGaN thin film superlattices (SL) grown by molecular beam epitaxy are investigated. Room-temperature measurements of the thermoelectric properties reveal that an increasing Ga-content in ternary InGaN alloys (0 < x(Ga) < 0.2) yields a more than 10-fold reduction in thermal conductivity (κ) without deteriorating electrical conductivity (σ), while the Seebeck coefficient (S) increases slightly due to a widening band gap compared to binary InN. Employing InN/InGaN SLs (x(Ga) = 0.1) with different periods, we demonstrate that confinement effects strongly enhance electron mobility with values as high as ∼820 cm{sup 2}/V s at an electron density n{sub e} of ∼5×10{sup 19} cm{sup −3}, leading to an exceptionally high σ of ∼5400 (Ωcm){sup −1}. Simultaneously, in very short-period SL structures S becomes decoupled from n{sub e}, κ is further reduced below the alloy limit (κ < 9 W/m-K), and the power factor increases to 2.5×10{sup −4} W/m-K{sup 2} by more than a factor of 5 as compared to In-rich InGaN alloys. These findings demonstrate that quantum confinement in group-III nitride-based superlattices facilitates improvements of thermoelectric properties over bulk-like ternary nitride alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research update: Prediction of high figure of merit plateau in SnS and solid solution of (Pb,Sn)S

Direct conversion between thermal and electrical energy can be achieved by thermoelectric materials, which provide a viable route for power generation and solid state refrigeration. Here, we use a combination of energetic, electronic, and vibrational first-principles based results to predict the figure of merit performance in hole doped single crystals of SnS and (Pb,Sn)S. We find high ZT values for both materials, specifically for (Pb,Sn)S along the b -axis. Both SnS and (Pb,Sn)S have excellent power factors when doped, due to a combination of increased electrical conductivity (due to doping) and a significantly enhanced Seebeck coefficient obtained by a doping-induced multiband effect. Anharmonic phonon calculations combined with a Debye-Calloway model show that the lattice thermal conductivity of both compounds is low, due to intrinsic anharmonicity, and is lowered further by the random, solid solution nature of the cation sublattice of (Pb,Sn)S. (Pb,Sn)S exhibits a high ZT plateau ranging from 1.3 at 300 K to 1.9 at 800 K. Finally, the overall ZT of the hole doped (Pb,Sn)S crystals is predicted to outperform most of the current state-of-the-art thermoelectric sulfide materials.

36 MATERIALS SCIENCE↗

Effect of high fluence neutron irradiation on transport properties of thermoelectrics

Thermoelectric materials were subjected to high fluence neutron irradiation in order to understand the effect of radiation damage on transport properties. This paper is relevant to the NASA Radioisotope Thermoelectric Generator (RTG) program in which thermoelectric elements are exposed to radiation over a long period of time in space missions. Selected n-type and p-type bismuth telluride materials were irradiated at the High Flux Isotope Reactor with a neutron fluence of 1.3 × 10 18 n/cm 2 (E > 0.1 MeV). The increase in the Seebeck coefficient in the n-type material was partially off-set by an increase in electrical resistivity, making the power factor higher at lower temperatures. For the p-type materials, although the Seebeck coefficient was not affected by irradiation, electrical resistivity decreased slightly. The figure of merit, zT, showed a clear drop in the 300–400 K range for the p-type material and an increase for the n-type material. Considering that the p-type and n-type materials are connected in series in a module, the overall irradiation damages at the device level were limited. Finally, these results, at neutron fluences exceeding a typical space mission, are significant to ensure that the radiation damage to thermoelectrics does not affect the performance of RTGs.

36 MATERIALS SCIENCE↗

Study on anisotropy of n-type Mg 3 Sb 2 -based thermoelectric materials

The recent discovery of a high thermoelectric figure of merit (ZT) in an n-type Mg 3 Sb 2 -based Zintl phase triggered an intense research effort to pursue even higher ZT. Based on our previous report on Mg 3.1 Nb 0.1 Sb 1.5 Bi 0.49 Te 0.01 , we report here that partial texturing in the (001) plane is achieved by double hot pressing, which is further confirmed by the rocking curves of the (002) plane. The textured samples of Mg 3.1 Nb 0.1 Sb 1.5 Bi 0.49 Te 0.01 show a much better average performance in the (00l) plane. Hall mobility is significantly improved to ~105 cm 2 V -1 s -1 at room temperature in the (00l) plane due to texturing, resulting in higher electrical conductivity, a higher power factor of ~18 μW cm -1 K -2 at room temperature, and also higher average ZT. This work shows that texturing is good for higher thermoelectric performance, suggesting that single crystals of n-type Mg 3 Sb 2 -based Zintl compounds are worth pursuing.

36 MATERIALS SCIENCE↗

The use of strain to tailor electronic thermoelectric transport properties: A first principles study of 2H-phase CuAlO 2

Using first principles calculations, the use of strain to adjust electronic transport and the resultant thermoelectric (TE) properties is discussed using 2H phase CuAlO 2 as a test case. Transparent oxide materials, such as CuAlO 2 , a p-­type transparent conducting oxide (TCO), have recently been studied for high temperature thermoelectric power generators and coolers for waste heat. Given TCO materials with relative ease of fabrication, low cost of materials, and non-­toxicity, the ability to tailor them to specific temperature ranges, power needs, and size requirements, through the use of strain opens an interesting avenue. We find that strain can have a significant effect on these properties, in some cases detrimental and in others beneficial, including the potential for n-­type power factors larger than the highest p-type case. The physical reasons for this behavior are explained in the terms of the thermoelectric transport distribution and the Landauer distribution of modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles assessment of thermoelectric properties of CuFeS 2

Composed of inexpensive and naturally abundant elements, the chalcopyrite mineral CuFeS 2 has received attention as a potentially useful thermoelectric. We use first-principles electronic structure and Boltzmann transport theory calculations to investigate thermoelectric properties of n -doped CuFeS 2 . We find that energy-dependent carrier lifetimes that are inversely proportional to the electronic density-of-states are crucial for reproducing experimental data on the transport properties, including the measured values of the Seebeck coefficient, α. The heavy-effective-mass conduction band promotes high values of α, but it also leads to low mobility due to strong electron-acoustic-phonon scattering. Low mobility forces one to rely on high carrier concentration to achieve high conductivity, which decreases α and limits the achievable power factor. Our calculations predict that ideally doped CuFeS 2 that has been nanostructured to an average grain size d≈20nm can attain thermoelectric figures of merit z T=0.25 to 0.8 for T=300 to 700 K, respectively, due to a reduction in the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Correlating thermoelectric (Bi,Sb) 2 Te 3 film electric transport properties with microstructure

The room temperature electronic transport properties of 1 μm thick Bi0.4Sb1.6Te3 (BST) films correlate with overall microstructural quality. Films with homogeneous composition are deposited onto fused silica substrates, capped with SiN to stop both oxidation and Te loss, and postannealed to temperatures ranging from 200 to 450 °C. BST grain sizes and (00l) orientations improve dramatically with annealing to 375 °C, with smaller increases to 450 °C. Tiny few-nanometer-sized voids in the as-deposited film grain boundaries coalesce into larger void sizes up to 300 nm with annealing to 350 °C; the smallest voids continue coalescing with annealing to 450 °C. These voids are decorated with few-nanometer-sized Sb clusters that increase in number with increasing annealing temperatures, reducing the Sb content of the remaining BST film matrix. Resistivity decreases linearly with increasing temperature over the entire range studied, consistent with improving crystalline quality. The Seebeck coefficient also improves with crystalline quality to 350 °C, above which void coalescence and reduced Sb content from the BST matrix correlate with a decrease in the Seebeck coefficient. Yet, a plateau exists for an optimal power factor between 350 and 450 °C, implying thermal stability to higher temperatures than previously reported.

36 MATERIALS SCIENCE↗

Hydride assisted synthesis of the high temperature thermoelectric phase: Yb14MgSb11

Yb14MnSb11 is a p-type high temperature thermoelectric material that has been shown to have a peak zT of 1.3 at 1273 K and stable lifetime testing at that temperature for over 1500 h by NASA. Yb14MgSb11 is a structural analog, but the highest temperature thermoelectric properties have not yet been reported. Yb14MgSb11 has been prepared in an environmentally friendly route employing metal hydrides to provide phase pure samples with excellent control of stoichiometry. We present a comparative study employing either MgH2 or YbH2 as a reactive precursor that also facilitates milling of the elements. High purity compositions are synthesized, and their high temperature thermoelectric properties were measured on dense pellets. Temperature-dependent thermoelectric properties were measured from 300 to 1273 K. Yb14MgSb11 exhibited a peak zT = 1.2 at 1273 K due to an appreciable power factor and low-lattice thermal conductivity. Carrier concentration and hall mobility were also measured from 300 to 1275 K and ranged from 5.3 × 1020 to 1.3 × 1021 cm−3 and from 4.7 to 0.7 cm2 V−1 S−1, respectively.

Justl, Andrew P. (ORCID:0000000163324545)↗

Simultaneous enhancements of thermopower and electrical conductivity in quasi-one-dimensional α -YbAlB 4 single crystal

We report the thermoelectric properties of valence fluctuating material α-YbAlB 4 along a-, b-, and c-axes. The temperature dependence of the Seebeck coefficient for all axes shows negative peaks at around 250 K, which is close to the Kondo scale. Interestingly, the absolute value of the Seebeck coefficient along c-axis (-7 μV K -1 at 250 K) is larger than those along a- and b-axes (-50 μV K -1 at 250 K) although the electrical resistivity along c-axis is about four times lower than those along a- and b-axes. As a result, a very large thermoelectric power factor of ~14.5 mW m -1 K -2 is realized along c-axis at 200 K, which is ten times larger than those along a- and b-axes. The anisotropies in electrical resistivity and Seebeck coefficient, respectively, have different origins of Fermi surface and the c-f hybridization, realizing the simultaneous enhancements of thermopower and electrical conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of structure and transport properties of the Ba 8 Cu 16 P 30 clathrate-I framework with the introduction of Ga

Two type-I clathrates were synthesized by introducing Ga into the framework of the Ba 8 Cu 16 P 30 type-I clathrate. The introduction of minute amounts of Ga, 1.9% Ga/M total (where M total = Cu + Ga), resulted in the disturbance of the completely ordered Pbcn superstructure of Ba 8 Cu 16 P 30 . Ba 8 Cu 15.43(2) Ga 0.3 P 30.26(3) crystallizes in a partially ordered orthorhombic Pmna clathrate-I superstructure with five out of 15 framework sites being jointly occupied by metal+phosphorus. Increasing the Ga content resulted in all framework sites being occupied by metal + phosphorus in the archetype cubic Pm n clathrate-I crystal structure of Ba 8 Cu 14.5(3) Ga 1.3 P 30.2(4) with 8.2% Ga/M total . A combination of energy dispersive x-ray spectroscopy, inductively coupled plasma mass spectroscopy, and single crystal x-ray diffraction was used to determine the structures alongside the compositions. The positional disorder was verified by 31 P solid state NMR spectroscopy. Characterization of the transport properties indicated that the Ga-substituted samples exhibit higher Seebeck coefficients and electrical resistivities compared to its pristine counterpart, in line with the expected reduction of the hole concentration due to Ga/Cu substitution. Moderate improvements in the thermoelectric power factor and overall figure-of-merit were observed for samples with 6.9% and 3.8% Ga/M total as compared to those for the pristine Ba 8 Cu 16 P 30 clathrate. Finally, band structure calculations shed light on how Ga substitution affects the electronic structure and thermoelectric properties of studied clathrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗