Progress in Simulating Coulomb Collisions in Particle Codes
A method for simulating Coulomb collisions in plasma simulations is described, in which particle weights are changed, instead of particle velocities.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A method for simulating Coulomb collisions in plasma simulations is described, in which particle weights are changed, instead of particle velocities.
We present graphics processing unit (GPU) implementations of two fast force calculation methods based on series expansions of the Poisson equation. One method is the self-consistent field (SCF) method, which is a Fourier-like expansion of the density field in some basis set; the other method is the multipole expansion (MEX) method, which is a Taylor-like expansion of the Green's function. MEX, which has been advocated in the past, has not gained as much popularity as SCF. Both are particle-field methods and optimized for collisionless galactic dynamics, but while SCF is a 'pure' expansion, MEX is an expansion in just the angular part; thus, MEX is capable of capturing radial structure easily, while SCF needs a large number of radial terms. We show that despite the expansion bias, these methods are more accurate than direct techniques for the same number of particles. The performance of our GPU code, which we call ETICS, is profiled and compared to a CPU implementation. On the tested GPU hardware, a full force calculation for one million particles took ∼0.1 s (depending on expansion cutoff), making simulations with as many as 10{sup 8} particles fast for a comparatively small number of nodes.
We used an electrostatic size classification technique to segregate particles of known composition prior to being injected into an inductively coupled plasma mass spectrometer (ICP-MS). Moreover, we counted size-segregated particles with a condensation nuclei counter as well as sampled with an ICP-MS. By injecting particles of known size, composition, and aerosol concentration into the ICP-MS, efficiencies of the order of magnitude aerosol detection were calculated, and the particle size dependencies for volatile and refractory species were quantified. Similar to laser ablation ICP-MS, aerosol detection efficiency was defined as the rate at which atoms were detected in the ICP-MS normalized by the rate at which atoms were injected in the form of particles. This method adds valuable insight into the development of technologies like laser ablation ICP-MS where aerosol particles (of relatively unknown size and gas concentration) are generated during ablation and then transported into the plasma of an ICP-MS. In this study, we characterized aerosol detection efficiencies of volatile species gold and silver along with refractory species aluminum oxide, cerium oxide, and yttrium oxide. Aerosols were generated with electrical mobility diameters ranging from 100 to 1000 nm. In general, it was observed that refractory species had lower aerosol detection efficiencies than volatile species, and there were strong dependencies on particle size and plasma torch residence time. Volatile species showed a distinct transition point at which aerosol detection efficiency began decreasing with increasing particle size. This critical diameter indicated the largest particle size for which complete particle detection should be expected and agreed with theories published in other works. Aerosol detection efficiencies also displayed power law dependencies on particle size. Aerosol detection efficiencies ranged from 10 -5 to 10 -11 . Free molecular heat and mass transfer theory was applied, but evaporative phenomena were not sufficient to explain the dependence of aerosol detection on particle diameter. Additional work is needed to correlate experimental data with theory for metal-oxides where thermodynamic property data are sparse relative to pure elements. Finally, when matrix effects and the diffusion of ions inside the plasma were considered, mass loading was concluded to have had an effect on the dependence of detection efficiency on particle diameter.
We explored a novel framework for simulating the small-scale processes that drive the evolution of aerosol, cloud, and precipitation particles, which are a critical gap in the predictive understanding of weather and climate. Particle-based methods have emerged as an effective tool for modeling aerosol-cloud-precipitation interactions, but existing particle-based models are computationally too expensive to simulate the large domains relevant for the atmosphere or to represent the full suite of relevant processes. The lack of a comprehensive and efficient reference model is a critical bottleneck in our understanding of cloud and precipitation processes and our ability to parameterize these processes for regional- and global-scale simulations. To address this need, we explored an approach to accelerate and expand particle-based models using a new machine learning approach, graph network-based simulators (GNS). Rather than modeling the evolution of the system by numerically integrating continuity equations, the GNS represents dynamics through learned message passing. Our aim was to develop fast and accurate surrogate models for particle-based simulations. We explored applying GNS to simulate cloud droplet transport, growth, and evaporation under turbulent conditions, but we found the GNS over-smoothed the simulations. We then applied the GNS to simulate aerosol dynamics through gas condensation and found the GNS was able to reproduce the benchmark, physics-based simulation with high accuracy.
A novel technique based on machine learning is introduced to reconstruct the decays of highly Lorentz-boosted particles. Using an end-to-end deep learning strategy, the technique bypasses existing rule-based particle reconstruction methods typically used in high energy physics analyses. It uses minimally processed detector data as input and directly outputs particle properties of interest. The new technique is demonstrated for the reconstruction of the invariant mass of particles decaying in the CMS detector. The decay of a hypothetical scalar particle A into two photons, A → γ γ , is chosen as a benchmark decay. Lorentz boosts γ L = 60 – 600 are considered, ranging from regimes where both photons are resolved to those where the photons are closely merged as one object. A training method using domain continuation is introduced, enabling the invariant mass reconstruction of unresolved photon pairs in a novel way. The new technique is validated using π 0 → γ γ decays in LHC collision data.
Particle tracking methods using emitted radiation show potential for following motion in opaque systems such as granular materials. Leading examples are Positron Emission Particle Tracking (PEPT) and Radioactive Particle Tracking (RPT). The application of such techniques sometimes requires the use of tracer particles which differ in size, density and/or shape from the particles of interest. This study investigates the extent to which such differences affect the result of the study by using the open source MFIX-DEM software to model particle motion in the travelling fluidized bed experiments. The results are compared with previously reported experimental studies using both PEPT and RPT. Consistent numerical results were obtained for both PEPT and RPT tracer particles. In determining averaged velocities using such techniques, there is a choice to be made between averaging velocities of particles crossing a virtual plane over a period of time (the “face-average” approach) or those passing through a defined volume over time (the “volume-average” approach). The differences between results obtained with these two methods are shown to be significant in this case, for both computation and experiment.
Synthetic apolipoproteins based on native/naturally occurring homolog proteins can be prepared using solid-phase peptide synthesis approaches combined with native chemical ligation methods to create analogs of full length apolipoproteins. The chemical synthesis is expected to allow introduction of non-natural amino acids, e.g., α,α′-dialkyl amino acids, with a periodicity that encourages both helix formation and amphipathicity. Such apolipoprotein analogs are expected to encourage, in some embodiments, facile and more complete NLP formation, enabling consideration of full spectrum of nanoparticle-based biotechnology applications ranging from therapeutic sequestration and delivery to energy/biofuel production to biopolymer production.
Over the past decade, particle image velocimetry (PIV) techniques have been used to obtain detailed measurements of the thermal and transport properties of weakly-coupled dusty plasmas. This paper reports on the application of an extension of these techniques, tomographic PIV (tom-PIV), which provides an instantaneous volumetric measurement of the particle transport.
Molecular dynamics simulations of a classical asymmetric electron bilayer for various values of the interlayer separation distance d and various degrees of asymmetry have been performed. The number of charged particles in the basic cell of one layer was fixed at 512, corresponding to a coupling strength {gamma}(=(e{sup 2}/ak{sub B}T)) of 80, while that of the other varied from 32 to 512 particles, corresponding to a {gamma} of 20 to 80; a is the Wigner-Seitz radius. We have analyzed the intralayer and interlayer pair-correlation functions and the self-diffusion coefficients of the two layers and compared them with those of a symmetric electron bilayer. It is found that the self-diffusion coefficients of the two layers do not differ significantly for values of d{<=}0.8 with a marked deviation setting for d=2. A fluid-solid phase transition, observed previously for the symmetric bilayer for certain values of d, no longer exists even for the slightly asymmetric (512,450) bilayer we considered.
Not Available
This work evaluates different optimization algorithms for computational fluid dynamics (CFD) simulations of engine combustion. Due to the computational expense of CFD simulations, emulators built with machine learning algorithms were used as surrogates for the optimizers. Two types of emulators were used: a Gaussian process (GP) and a weighted variety of machine learning methods called SuperLearner (SL). The emulators were trained using a dataset of 2048 CFD simulations that were run concurrently on a supercomputer. The design of experiments (DOE) for the CFD runs was obtained by perturbing nine input parameters using a Monte-Carlo method. The CFD simulations were of a heavy duty engine running with a low octane gasoline-like fuel at a partially premixed compression ignition mode. Ten optimization algorithms were tested, including types typically used in research applications. Each optimizer was allowed 800 function evaluations and was randomly tested 100 times. The optimizers were evaluated for the median, minimum, and maximum merits obtained in the 100 attempts. Some optimizers required more sequential evaluations, thereby resulting in longer wall clock times to reach an optimum. The best performing optimization methods were particle swarm optimization (PSO), differential evolution (DE), GENOUD (an evolutionary algorithm), and micro-genetic algorithm (GA). These methods found a high median optimum as well as a reasonable minimum optimum of the 100 trials. Moreover, all of these methods were able to operate with less than 100 successive iterations, which reduced the wall clock time required in practice. Two methods were found to be effective but required a much larger number of successive iterations: the DIRECT and MALSCHAINS algorithms. A random search method that completed in a single iteration performed poorly in finding optimum designs but was included to illustrate the limitation of highly concurrent search methods. The last three methods, Nelder–Mead, bound optimization by quadratic approximation (BOBYQA), and constrained optimization by linear approximation (COBYLA), did not perform as well.
A review of the SANC computer system intended for theoretical support of experiments at colliders is presented. The system allows the precision predictions to be obtained semiautomatically for a wide class of particle interaction processes within the Standard Model. In this case, one considers total contributions of one-loop radiative corrections. Basic elements of the computer system are described, and examples of using the system for the high-precision description of certain processes of the Standard Model particle interactions are given. The MCSANC code developed using the Monte Carlo simulation is presented, which is used to calculate cross sections of a number of processes, investigated at the Large Hadron Collider. The prospects of research development in this field for theoretical support at future hadron and lepton colliders are discussed.
The Booster to AGS (BtA) transfer line [Ref for BtA line] transports the beam bunches from the AGS-Booster to the AGS synchrotron, and also matches the beam parameters ({beta}{sub x,y}, {alpha}{sub x,y}) and dispersion functions ({eta}{sub x,y}, {eta}{prime}{sub x,y}) of the transported beam to the corresponding quantities of the circulating beam in AGS, at the AGS injection point. In this technical note we describe in details, the calculations of the matching procedure of the BtA line to the bare-AGS, and provide magnet settings for the MAD-model of the BtA transfer line which is 'matched' to the bare-AGS. In a separate but more concise technical note (Part II) we will present results on the beam optics of the BtA beam line which is 'matched' to the AGS with two helical snakes.
A Rayleigh approximation is constructed for light scattering by small multilayer axisymmetric particles, in which their polarizability is determined by the generalized separation of variables method (SVM). In this method, scalar potentials, the gradients of which yield the electric-field strengths, are represented as expansions in spherical harmonics of the Laplace equation. Unknown coefficients of expansions are determined from the boundary conditions, which are reduced to infinite systems of linear algebraic equations (ISLAEs), since the separation of variables is incomplete. The T matrix of the electrostatic problem, principal element T{sub 11} of which is proportional to the particle polarizability, is determined. The necessary condition for the ISLAEs solvability for the SVM coincides with the condition of the correct application of the extended boundary conditions method (EBCM). However, numerical calculations in which finite-dimensional (i.e., reduced) systems are solved, yield different results in ranges of variation of parameters that are close to the boundary of the range of applicability. An analysis of the numerical calculations of the scattering and absorption cross sections for two-layer confocal spheroids, an exact solution for which can be obtained using spheroidal harmonics, shows that the SVM is preferable to the EBCM. It turned out that the proposed method yields workable results in a wider range of variation of parameters. Even outside the range of applicability, in which it should be regarded as a certain approximate solution, its use in a number of cases is quite acceptable. Additional calculations for three-layer nonconfocal spheroids, as well as for three-layer similar pseudospheroids and Pascal’s snails, which can be obtained from spheroids as a result of the inversion with respect to the coordinate origin and one of the foci, respectively, confirm these inferences. We note that, for certain values of the parameters, the shapes of the latter particles are nonconvex.
Most methods of particle-size analysis involve particle fractionation which, is often done by filtration or the use of screens. This paper provides proof of concept testing for new in-pipe particle fractionation technologies that can be used at laboratory to industrial scales. These technologies are extensions of recent advancements in bump arrays as well as testing of new inline angled-to-the-flow slats, and advanced boycott-based Avalanche separation technologies. Experiments were conducted for three targeted particle fractionation technologies to evaluate the in-pipe removal of oversized sands in Newtonian slurries prior to the introduction of bump arrays. The mesofluidic system uses an array of staggered posts as configured in a bump array for Newtonian slurry conditions. The methods and results of these experiments are described in this paper. This information could be applied in most industrial and laboratory systems to rapidly remove oversized particles from a flowing slurry.
During relativistic magnetic reconnection, antiparallel magnetic fields undergo a rapid change in topology, releasing a large amount of energy in the form of non-thermal particle acceleration. This work explores the application of mesh refinement to 2D reconnection simulations to efficiently model the inherent disparity in length-scales. We have systematically investigated the effects of mesh refinement and determined necessary modifications to the algorithm required to mitigate non-physical artifacts at the coarse–fine interface. We have used the ultrahigh-order pseudo-spectral analytical time-domain Maxwell solver to analyze how its use can mitigate the numerical dispersion that occurs with the finite-difference time-domain (or “Yee”) method. Absorbing layers are introduced at the coarse–fine interface to eliminate spurious effects that occur with mesh refinement. We also study how damping the electromagnetic fields and current density in the absorbing layer can help prevent the non-physical accumulation of charge and current density at the coarse–fine interface. Using a mesh refinement ratio of 8 for two-dimensional magnetic reconnection simulations, we obtained good agreement with the high-resolution baseline simulation, using only 36% of the macroparticles and 71% of the node-hours needed for the baseline. The methods presented here are especially applicable to 3D systems where higher memory savings are expected than in 2D, enabling comprehensive, computationally efficient 3D reconnection studies in the future.
The paper considers methods of particle cooling applicable to beam cooling in high energy hadron colliders at the collision energy. Presently, there are two major methods of the cooling the electron cooling and stochastic cooling. The later, in application to colliders, requires exceptionally large frequency band of cooling system. Presently two methods are considered. They are the optical stochastic cooling (OSC) and the coherent electron cooling (CEC). OSC and CEC are essentially extensions of microwave stochastic cooling, operating in 1-10 GHz frequency range, to the optical frequencies enabling bands up to 30-300 THz. The OSC uses undulators as a pickup and a kicker, and an optical amplifier for signal amplification, while the CEC uses an electron beam for all these functions. We discuss major limitations, advantages and disadvantages of electron and stochastic cooling systems.
Stochastic particle-resolved methods are a useful way to compute the time evolution of the multi-dimensional size distribution of atmospheric aerosol particles. An effective approach to improve the efficiency of such models is the use of weighted computational particles. Here we introduce particle weighting functions that are power laws in particle size to the recently-developed particle-resolved model PartMC-MOSAIC and present the mathematical formalism of these Weighted Flow Algorithms (WFA) for particle coagulation and growth. We apply this to an urban plume scenario that simulates a particle population undergoing emission of different particle types, dilution, coagulation and aerosol chemistry along a Lagrangian trajectory. We quantify the performance of the Weighted Flow Algorithm for number and mass-based quantities of relevance for atmospheric sciences applications.