SEARCH · Search NASA

Results for “Path Forward”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS2022

Digital Flight: A New Cooperative Operating Mode to Complement VFR and IFR

Digital Flight is a proposed new operating mode for all airspace users, complementing and adding to the existing operating modes of visual and instrument flight rules (VFR and IFR) and providing for cooperative integration in controlled airspace. Under new regulations (Digital Flight Rules, DFR) that set requirements for its sustained use, qualified operators employ Digital Flight to enhance their airspace access and operational flexibility in all visibility conditions and eventually all airspace classes without requiring segregation from incumbent operations. Enabled by connected digital information and technologies, Digital Flight operators employ cooperative practices and self-separation to ensure flight path safety in lieu of visual procedures or receiving separation services from Air Traffic Control. Its distributed structure and automated functions enable traffic densities and operational tempos not achievable with the existing operating modes. Various ongoing and emerging industry initiatives for enabling new entrants (e.g., unmanned aircraft systems, urban air taxis) and enhanced use of underserved airspace (e.g., ultra-high altitude), are pursuing various alternative operating modes with significant similarities, creating a unique and time-limited opportunity for harmonization and convergence. Digital Flight is proposed to serve that harmonizing role, creating a common new paradigm for airspace operations. Such convergence would not only bring together these emerging market segments but will also bolster the existing operators with access to this new operating mode and its advantages. Digital Flight provides an opportunity to focus regulatory development and benefit the aviation industry. This paper describes Digital Flight in sufficient detail to initiate community engagement and deliberation on a common new operating mode. It describes the essential elements, principal capabilities, and operational integration of DFR in shared airspace. It describes the value proposition from multiple perspectives and presents initial thoughts on the path forward.

Digital flight↗

NASA NTRS2022

Developing a Vision for Heliophysics Infrastructure

The current infrastructure in heliophysics acts as a barrier towards progress due to the lack of intelligent connections between the many valuable resources in our field. Due to the large scale of this problem, the path to a productive infrastructure requires community collaboration towards a common vision. This white paper presents a broad overview of what that vision could be and a path forward.

Infrastructure↗

NASA NTRS2022

The Puzzling Structure of Solar Convection: Window into the Dynamo

The operation of the solar dynamo, with all of its remarkable spatio-temporal ordering, remains an outstanding problem of modern solar physics. A number of mechanisms that might plausibly contribute to its operation have been proposed, but the relative role played by each remains unclear. This uncertainty stems from continuing questions concerning the speed and structure of deep-seated convective flows. Those flows are in-turn thought to sustain both the Sun’s turbulent EMF and the large-scale flows of differential rotation and meridional circulation suspected of influencing the dynamo’s organization and timing. Ultimately, the convective and large-scale flow structure derive from the Coriolis force. When the Coriolis effect is weak (rapid convective flow), convection exhibits little organization in its spatial structure, and the meridional flow is expected to assume a single-celled profile within each hemisphere. Convection subject to strong Coriolis forces instead organizes into compact, spiraling columnar structures and sustains meridional flows that possess multiple cells in latitude and radius. The implications for the dynamo in these two regimes are substantial, impacting the flux-transport properties of any assumed meridional flow and the convectively-driven EMF. Continued progress in this area is complicated by (i) inconsistencies between helioseismic measurements of convective and meridional flow made with different techniques and instruments, and (ii) a lack of high-latitude data for convection, differential rotation, and meridional flow. We suggest that the path forward to resolving these difficulties is twofold. First, the acquisition of long-term helioseismic and emissivity measurements obtained from a polar vantage point is vital to complete our picture of the Sun’s outer convection zone. Second, sustained and expanded investment in theory-oriented and combined theory/observational research initiatives will be crucial to fully exploit these new observations and to resolve inconsistencies between existing measurements.

SMD↗

NASA NTRSDate not supplied

Assuring Safety-Critical Machine Learning Enabled Systems: Challenges and Promise

Machine learning is increasingly being used in safety-critical systems, where the public safety requires a rigorous assurance process. We shall outline how assurance processes work for conventional systems and identify the primary difficulty in applying them to machine learning enabled systems. We will then outline a path forward including identifying where considerable basic research remains.

machine learning↗

NASA NTRSDate not supplied

Lessons Learned From Plant Research in Low Earth Orbit

This presentation is part of the pre-ASGSR workshop that will be held in Houston, Texas on November 9, 2022. The overall objective of the workshop is to discuss conducting biology experiments beyond low Earth orbit (LEO) and present the challenges and the paths forward. In part, the workshop will highlight lessons learned in plant space biology, some of the plant spaceflight stressors that are anticipated to cause biological changes beyond LEO and discuss what is currently known about these changes, and how results can be leveraged for future missions to the Moon and Mars. Platforms that can be utilized to conduct plant science experiments beyond LEO will also be discussed.

Plant Space Biology↗

NASA NTRSDate not supplied

Updating the Thermal Vacuum Chambers at the NASA Johnson Space Center

Chambers A and B are two large thermal vacuum chambers at Johnson Space Center which enable space simulation for unmanned and human-rated missions, respectively. With the resurgence in deep space missions for scientific research and various private commercial ventures, these chambers are expected to be used frequently for at least the next decade. For qualifying the James Webb Space Telescope, upgrades to Chamber A were performed which included the addition of a 12.5 kW refrigeration system with helium shrouds capable of simulating deep space environment and an efficient and reliable LN2 natural flow thermosiphon system for the thermal shield. Continuous improvements since then have focused on ensuring operational readiness by modernizing the data acquisition, recording, controls, and visualization systems for both chambers and clean room. These upgrades will be the focus of this paper. Controlling the Cryochambers was enhanced by moving from a 32-bit SCADA system to a 64-bit architected system. Infrastructural changes involved installing redundant power circuits, adding new servers, network switches, and including load balancing with fail-over between servers to minimize downtime. Instead of distributed servers, 3 redundant servers are used to share configurations. Configurations are now kept in a shared SQL instance making it easy to deploy and maintain. During this upgrade process many sub-systems (PLCs and NI PXI interfaces to sensors) were upgraded from the prior OPC-DA to the more secure OPC-UA protocol. Cryo-system PLCs were updated to allow Ganni cycle floating pressure calculations from any cold box to be sent to any compressor. During the project, the team recreated over 70,000 live data points, 50000 historical data points, and 4000 alarms. Finally, the graphical interfaces were upgraded to support HTML 5 in conjunction shared pages were implemented reducing the total number of webpages by over 75%. These system updates reinvigorated the previous SCADA system which had reached its end of life. The same look and feel was maintained while providing operators with an updated interface to control, troubleshoot, and record. The new system architecture is more robust and easier to maintain creating a path forward to address remaining problem points and implement additional features.

Cody Schaefer↗

NASA NTRSDate not supplied

PLANETARY DEFENSE: FINDINGS AND RECOMMENDATIONS FROM THE NATIONAL ACADEMIES PLANETARY SCIENCE AND ASTROBIOLOGY DECADAL SURVEY 2023 - 2032

The National Academies of Sciences, Engineering, and Medicine was chartered by the NASA Science Mission Directorate (SMD), with support from the National Science Foundation, to conduct a new decadal survey to develop a comprehensive science and mission strategy for planetary science (1). The survey was tasked to determine the current state of knowledge and to identify the most important scientific questions to be addressed in astrobiology and planetary science during the upcoming decade of 2023 - 2032. For the first time, the decadal survey also included and addressed the topic of planetary defense, now recognized as a key element of NASA’s planetary science activities under the direction of NASA’s SMD Planetary Defense Coordination Office. The topic of planetary defense was included in the decadal survey as a dedicated chapter, divided into five sections based on the framework from the U.S. National NEO Preparedness Strategy and Action Plan (2). These sections discussed: NEO Detection, Tracking, and Characterization NEO Modelling, Prediction, and Integration NEO Deflection and Disruption Missions International Cooperation on NEO Preparation NEO Impact Emergency Procedures and Action Protocols Content of these sections included identifying the activities, ground- and space-based assets, facilities, resources, technologies, and missions that should be considered to enable NEO preparedness over the next decade. Supporting inputs to this chapter involved contributions from submitted white papers authored by many members of the NEO science and planetary defense communities. In addition, a planetary defense rapid mission architecture study commissioned by the decadal survey small bodies panel and led by the Jet Propulsion Laboratory examined several different types of in-situ characterization and mitigation demonstration missions. All of this input contributed to the formulation of 42 findings and 11 recommendations that suggest a path forward for increasing our understanding of the NEO population and their associated physical characteristics, modelling the impact probabilities and hazard potential of these objects, and implementing plans to develop and test NEO impact mitigation capabilities. Including planetary defense in the decadal survey has helped sharpen the focus on this international issue and provided key inputs for stakeholders and decision makers to consider when developing future planetary defense-related activities. Such information is vital for developing a long-term integrated planetary defense capability able to protect humanity in the decades to come.

NEO Detection and Characterization↗

NASA NTRSDate not supplied

Conjunction Assessment and Deconfliction Paradigm for Co-Located Satellite Constellations With on-Spacecraft “Autonomous” Flight Dynamics Control

Satellite constellations that employ on-spacecraft flight dynamics and conjunction assessment (CA) approaches face particular challenges. First, they must arrange to obtain and upload to the constellation satellite close approach information, such as Conjunction Data Messages, so that their on-board systems will have the data they need to make informed CA decisions. Second, given current latencies in obtaining CA screening information, such systems often cannot obtain dedicated screenings of their proposed maneuvers before they are executed. Third, they usually cannot engage in real time with owner/operators (O/Os) with whom they may come into conjunction, relying instead on pre-arranged courses of action that may or may not fit a given situation well. Despite these difficulties, it is nonetheless possible, as operators such as SpaceX have demonstrated, to operate safely using on-board CA calculations, in the presence of a largely collaborative operating environment. The situation breaks down, however, when two constellations that operate with such a paradigm are placed in the same orbital region and will experience conjunctions with each other. Each may have a vague idea of where the other’s satellites are, or perhaps even a somewhat precise idea if they exchange O/O ephemerides, but neither will know the other’s more immediate maneuver intentions, especially for situations in which they are in a high-risk conjunction with each other and a mitigation maneuver is required. As there is no formalized way for these automated systems to ascertain each other’s intentions for this type of conjunction, it is quite possible that each spacecraft may choose a maneuver that results in the two objects’ colliding. An opportunity to develop a solution to this problem was presented by the NASA “Starling” project, a small experimental constellation developed to demonstrate autonomous satellite control and constellation reconfiguration and for which a launch was obtained that, serendipitously, will place this constellation close to the SpaceX Starlink constellation. Because the NASA constellation is experimental, an extended mission part of the mission has been negotiated to implement and test mechanisms for resolving the problem of co-located constellations with on-board flight dynamics control. For the last eighteen months, a consortium among NASA Ames (the Starling satellite providers), NASA CARA (the Agency organization responsible for conjunction assessment), Space X, and the Department of Commerce (in observer status) has met regularly to assemble a concept of operations for a robust solution to this problem and has developed a prototype ground node that will serve as a needed CA screening and information dispensary. The approach and methods, as well as the active employment of the developed ground node, will be tested both in simulation before actual use and then in actual spacecraft operations, which are anticipated to begin in January 2024. This paper will describe the co-located autonomously-controlled constellation problem and the developed solution in detail, outlining what ground node (i.e., government) infrastructure and features are required, what particular capabilities are needed by the constellations themselves in order to make use of this deconfliction paradigm, and the migration path forward to allow such a capability set to be incorporated by the Department of Commerce’s space traffic coordination system.

Conjunction Assessment↗

NASA NTRS2023

Fire Station #2, Former Sewage Treatment Plant #17, and Towway Area-SWMU 114 PFAS Site Assessment Progress Report Kennedy Space Center, Florida

This PFAS Site Assessment Progress Report (SAPR) presents the findings of the 2022 PFAS investigation conducted from November 2021 through August 2022 at Solid Waste Management Unit (SWMU) 114 located within Kennedy Space Center (KSC), Florida. SWMU 114 includes area around Fire Station #2, Former Sewage Treatment Plant #17, the southern portion of the Shuttle Landing Facility Runway, Remote Launch Vehicle Hangar, and the Towway area. Fire Station #2 was constructed in 2008 and is currently active, housing fire station personnel and equipment, including aqueous film forming foam (AFFF). Releases of AFFF has occurred at SWMU 114. Previous environmental assessments have been performed at SWMU 114, including soil, groundwater, and surface water sampling for volatile organic compounds, polycyclic aromatic hydrocarbons, total petroleum hydrocarbons, and metals. No active remediation has been performed at the SWMU 114. PFAS site assessment field activities were conducted at SWMU 114 from November 2021 through August 2022. During the 2021-2022 Site Assessment, 124 direct-push samples were collected from 27 locations, 17 surface water samples were collected from 15 locations, 41 groundwater samples were collected from 37 newly installed monitoring wells, five concrete samples were collected from four locations, and one asphalt sample was collected. Additionally, two soil borings were advanced to 60 feet for lithologic descriptions, ten staff gauges were installed, and one round of water level measurements were collected from monitoring wells and staff gauges for groundwater flow determination. All groundwater and surface water samples were analyzed for 25 PFAS analytes by USEPA Method 537M. Concrete, and asphalt samples were analyzed by synthetic precipitation leaching procedure (SPLP) PFAS analysis by USEPA Modified Method 537M. Groundwater results were compared to the most recent Regional Screening Levels (RSLs) published by USEPA for residential tap water (USEPA, 2022a) to determine the extent of PFAS contamination at SWMU 114 for six PFAS analytes (PFOA, PFNA, PFBS, PFHxS, PFOS, and GenX). Surface water results were compared to the FDEP surface water screening levels (SW SLs) (FDEP, 2020) for PFOA and PFOS. The PFAS investigation concluded that groundwater exceeding RSLs extends east and south to Banana Creek and west to approximately the center of the SLF runway. The extent of PFAS is approximated to the north, to an area between Sharkey Road and Astronaut Road, where samples below the RSLs do not fully bound SWMU 114. At least two distinct PFAS source areas are located near Fire Station #2 and along Towway, at S114-MW0007S, within SWMU 114. Groundwater head measurements indicate that flow at SWMU 114 is generally similar across the shallow and intermediate water tables. A northeast to southwest trending groundwater divide is located near the middle of Towway where groundwater southeast of the divide flows to the south and groundwater northwest of the divide flows to the west. The groundwater divide generally separates the two areas of higher PFAS concentrations. Surface water samples indicated concentrations of PFOS above the SW SLs in surface water bodies across the site. Further assessment and sampling are required to better understand the interaction between groundwater and surface water at SWMU 114. Concrete and asphalt samples collected confirm that a significant release of AFFF occurred near the stormwater pond northwest of Fire Station #2. Additional concrete samples surrounding Fire Station #2 and at the northwest and southeast edges of the SLF tarmac indicate elevated PFOS concentrations. These results indicate that discharges of AFFF in these locations have infiltrated into asphalt and concrete and may act as a continuing source of PFAS to groundwater and surface water after rain events. Additional direct-push samples are required to delineate PFAS at SWMU 114. Samples may need to extend beyond the Former SLF Rescue Building and Morpheous Test Site to delineate PFAS in groundwater. Monitoring wells should be sampled and gauged quarterly to determine if seasonal impacts are observable, especially in shallow wells near surface water features. Furthermore, surface water samples should be collected from additional ditches to further define the extent of surface water impacts at SWMU 114 and extending along the SLF runway. Staff gauges should be gauged quarterly with groundwater gauging to determine surface water flow and interaction with groundwater. The PFAS sampling results and path forward for SWMU 114 were presented to the KSC Remediation Team in October 2022. Once the PFAS SAPR is approved, it will be submitted to the Florida Department of Environmental Protection.

Howard Franklin Fowler↗

NASA NTRSDate not supplied

The Next Generation of Kevlar® Fiber for Improved Micrometeoroid and Orbital Debris Protection

The next generation of Kevlar® fiber for Micrometeoroid and Orbital Debris (MMOD) protection demonstrates the potential to increase orbital debris protection while optimizing the overall weight of the MMOD system and reducing damage to the rear wall of the shield. The DuPont™ CoreMatrix™ Technology process combines numerous woven layers by infusing staple fiber to strengthen the fabric and enables lightweight and flexible protective solutions compared to traditional woven structures. DuPont™ CoreMatrix™ Technology is a step-change in debris protection that allows for the improvement of system-level performance while removing heavier portions of the system. This paper introduces this new technology that will be available from DuPont starting in late 2023 and compares the performance of CoreMatrix™ Technology to legacy solutions. NASA’s Hypervelocity Impact Technology team has conducted hypervelocity impact tests on a subset of DuPont supplied samples that incorporate this latest Kevlar® material. The paper will describe the hypervelocity impact testing parameters, results, and path forward.

Christopher W. Seay↗

NASA NTRSDate not supplied

Artemis and Ethics Workshop Lessons Learned

As NASA lays out its Artemis activities, it expects to set precedents in spaceflight for decades to come. Artemis is a far more ambitious program than even Apollo, aimed at developing a sustained human presence on and around the lunar surface, in preparation for Mars exploration. As a result, considering ethical and social concerns in the discussion and design of Artemis is vital to ensuring the future worlds we create are ones where humanity collectively wants to live. By understanding how to reflect on these issues as NASA makes decisions related to Artemis, NASA can avoid unintended consequences stemming from cultural perceptions of human exploration of the solar system that may harm society. We recognize that a diverse range of groups need to be part of this conversation. There are many different views about the work that should happen in space. We recognize that NASA does not hold sole responsibility for determining the ethical path forward in space, as decisions made by commercial, international, and intergovernmental partners play a major role. Inclusive conversations help inform that work. Others have already argued that social scientists and engineers need to work together with inputs from stakeholders to design the future. To begin to answer this need, NASA’s Office of Technology, Policy, and Strategy (OTPS) hosted an Artemis and Ethics Workshop. This workshop was held in Washington, DC from April 12th-14th, 2023 and brought together invited experts in social science fields and NASA managers to discuss ethical, legal, and social aspects (ELSA) of Artemis and human exploration in general. The goal of the workshop was to discuss issues and build connections that NASA managers can consider across variety of ethical issues surrounding Artemis.

Katherine T McBrayer↗

NASA NTRS2022

Night Sky Testing of the Lunar Flashlight Star Tracker

Lunar Flashlight (LF) is a 6U, 14 kg spacecraft being built by the NASA Jet Propulsion Laboratory (JPL). The mission will use IR laser technology to search for volatiles and surface water ice deposits in the permanently shadowed regions (PSR) of the moon in preparation for future human lunar exploration. The fine pointing provided by the Guidance, Navigation and Control (GNC) system is crucial for the spacecraft to successfully reach the moon, enter a lunar orbit, and acquire scientific data. At the center of the GNC system’s ability to determine the spacecraft’s attitude is a star tracker. The LF star tracker is a commercial-off-the-shelf (COTS) unit built into the integrated GNC system provided by Blue Canyon Technologies. Blue Canyon tested the star tracker in a lab environment for basic functionality and attitude estimation capabilities; upon delivery of the hardware to JPL, further testing with a real night sky was desired to determine expected in-flight operational characteristics. JPL maintains the Table Mountain Facility with its suite of ground telescopes, including a 0.6m telescope with an equatorial mount. This stable platform provided a highly accurate method of providing slews and attitude holds akin to what the spacecraft will perform in flight. Therefore, by analyzing the data from these representative night-sky ground tests performed in March, 2021, it is possible to acquire expected flight performance of the star tracker, particularly in regard to the ability of the star tracker to maintain lock on the starfield during planned maneuver types. This paper presents the various tests that have been performed to ensure that the LF star tracker will function as part of the overall GNC system and integrated spacecraft once launched. Test data is included for several key tests, and a path forward towards future integration and testing at the spacecraft level is described.

Baker, John↗

NASA NTRS2023

In Situ Chemical Reduction Interim Measures Work Plan Hot Spot 3 Mobile Launcher Platform Rehabilitation Sites / Vehicle Assembly Building Area (SWMU 056) Kennedy Space Center, Florida

This document presents the design details of an In Situ Chemical Reduction (ISCR) Interim Measures Work Plan for Hot Spot 3 within Mobile Launcher Platform Rehabilitation Sites/Vehicle Assembly Building Area, Solid Waste Management Unit (SWMU) 056 (SWMU 056), located at the John F. Kennedy Space Center, Florida. The interim measures (IM) treatment zone encompasses an area identified as the High Concentration Plume (HCP), which is defined as the area with chlorinated volatile organic compound (CVOC) groundwater concentrations greater than their respective Natural Attenuation Default Concentration (NADC). The objective of the IM is to remove CVOC mass within the treatment area to levels that facilitate a transition to natural attenuation monitoring. The IM design consists of the selected ISCR amendment, Provect-IR, which is a mixture of solid reagents in a single product that promotes enhanced reductive dechlorination and ISCR. ProvectIR includes natural antimethanogenic compounds; multiple hydrophilic, nutrient-rich organic carbon sources; zero valent iron; chemical oxygen scavengers; and vitamin and mineral sources. The proposed treatment area for this IM encompasses less than 1 acre and includes three vertical treatment intervals to reach the NADC plumes that vary per CVOC and depth: 4 to 10 feet below land surface (bls), 10 to 18 feet bls, and 42 to 52 feet bls. The amendment will be distributed through 16 injection points (IP01 through IP16) using dosing rates ranging from 0.4% to 0.6% of soil mass within the treatment interval and a 15% or 20% slurry strength. Dosage rates and slurry strength are based on groundwater geochemistry, soil characteristics, and contaminant concentrations. To aid in the evaluation of the ISCR IM performance, six performance monitoring wells will be installed following injections and sampled semiannually. CVOC parameters will be sampled until concentrations reduce to below their NADC. Underground Injection Control parameters will be sampled until concentrations decrease to background levels or to levels that meet respective groundwater standards. Sampling frequency will be evaluated annually and modified as needed. The path forward for the ISCR IM implementation includes preparing the IM Implementation Work Plan, ISCR injections, monitoring well installation, performance monitoring, and reporting.

Randall K. Sillan↗

NASA NTRSDate not supplied

Updating the Thermal Vacuum Chambers at the NASA Johnson Space Center

Cody Schaefer↗

NASA NTRS2023

m:N Working Group Spring Meeting Summary

On May 9th and 11th, 2023, the NASA-led MultiVehicle (m:N) Working Group and its subgroups [small Unmanned Aircraft Systems (sUAS), Large UAS, High Altitude Pseudo Satellite (HAPS), and Urban Air Mobility (UAM)] met in Denver, CO at XPONENTIAL 2023, co-hosted by the Association for Uncrewed Vehicle Systems International (AUVSI) and Messe Düsseldorf North America (MDNA), for an in-person meeting. The subgroups meet multiple times throughout the year, virtually. Twice a year, however, participants from all the subgroups come together to brief each other on progress, challenges, and path forward ideas for incorporating UAS into the airspace. The m:N working group is co-chaired by Jay Shively (Adaptive Aerospace) and Andy Thurling (Thurling Aero Consulting) and is comprised of members from government, industry, and academia in an effort to identify and reduce barriers to m:N operations. This effort also includes identifying requirements, use cases, and metrics to support organizations and groups, including the FAA and RTCA’s SC-228 Detect and Avoid.

multi-vehicle↗

NASA NTRSDate not supplied

Phasing COTS Part Into Low-Risk-Tolerant Missions

A number of activities within NASA and the space community, as well as growing technology needs and supply chain changes have accelerated the need to expand the use of COTS parts within NASA. While the use of COTS has been formally institutionalized and deemed acceptable for Class D space missions and those with greater tolerance for risk, there is still a lack of understanding of how to most effectively use COTS in such high risk-tolerance missions, and no apparent path towards broad use in missions with much less tolerance for risk. However, the reality is that the fundamental limitations of technology associated with the military specification system combined with the need to fly newer technologies in upcoming flagship robotic missions and human space flight missions will ultimately demand a more expansive use of COTS. The infinite nature of COTS gives rise to numerous challenges in the selection, acceptance, testing, and usage of COTS when reliable operation is essential. This presentation will highlight some of the results of a NASA Engineering and Safety Center (NESC) study on the use of COTS parts, as well as many of the historical through current facts about parts assurance within Agency to provide a path forward for reliable use of COTS for a range of space applications and risk postures. In addition this presentation will dispel the myth that expanded use of COTS parts causes a new set of radiation threats to missions.

COTS↗

NASA NTRS2022

m:N Working Group

On November 29th and 30th, 2022, the m:N UAS working group and its subgroups [small Unmanned Aircraft Systems (sUAS), Large UAS, High Altitude Platform Systems (HAPS), and Urban Air Mobility (UAM)] met at the NASA Ames Research Center in Mountain View, CA for an in person meeting. The option to dial in remotely and use Conference.IO to engage with questions was offered as well. The subgroups meet multiple times throughout the year, virtually. Twice a year however, participants from all the subgroups come together to brief each other on progress, challenges, and path forward ideas for incorporating UAS into the airspace. The m:N UAS working group is run by Jay Shively (Adaptive Aerospace) and Andy Thurling (Thurling Aero Consulting) and is comprised of members from government, industry, and academia in an effort to identify and reduce barriers to m:N operations. This effort also includes identifying requirements, use cases, and metrics to support organizations and groups including the FAA and RTCA’s SC-228 Detect and Avoid. Each subgroup is run by a government/industry team.

multi-vehicle↗

NASA NTRS2020

Mid-infrared detector development for the Origins Space Telescope

Mid-infrared detector arrays operating from 2.8 to 20 μm are baselined in the design of the Origins Space Telescope Mid-Infrared Spectrometer Instrument. This instrument is designed to detect and measure the spectral signatures of gases of biogenic origin in the atmospheres of exoplanets as they transit their host stars. In order to make these detections, the detector array’s pixels need to have high-signal stability when exposed to a constant flux in multiple time-series integration over a typical transit time of a few hours. With the use of a densified pupil spectrometer design, pointing effects can be mitigated because pointing variations do not displace spectra on the detector and each wavelength of light is averaged over a large number of pixels, giving good spectrophotometric stabilities. The current state-of-the-art detector arrays do not achieve these stabilities, although with a feasible development program this level of performance should be achievable. Three detector technologies are under consideration for this development, HgCdTe arrays, Si:As impurity band conduction arrays, and transition edge super-conductor bolometer arrays. We primarily treat the HgCdTe technology development, but also introduce the paths forward for the other two technologies. After a few years-long investigative programs, a down-select will be undertaken to select the flight technology.

Astronomy↗