SEARCH · Search NASA

Results for “Performance Data Analysis and Reporting System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Alternate Communications Spectrum Study (ACSS) for Aviation Data Links (ADL)

The aim of the work was to identify the key factors involved in the use of alternate spectrum in various bands for a future integrated CNS data link. The study focused on systems and spectral bands that can deliver VDL-or-higher data rates in a two-way communication setting (including air-ground, ground-air, and air-air modes of operation), with multiple platforms (aircraft) operating in the same local environment. We begin with a review of the initial task list, and the final task list. The final task list contained a focus upon spectral availability and related systems that could be affected by the deployment of a new aviation data link (ADL) system. Most of this addresses the lower few layers of the communications protocol stack. A brief review of current related efforts in the aeronautical community is then provided, in which we describe several systems and programs of interest. Participation in some of these efforts is recommended. We also delineate several of the advantages and disadvantages of these system/efforts, in view of anticipated requirements of a new ADL. Desired attributes of a new ADL system are then discussed, and a connection with existing systems is made. The need to consider a wider set of alternative systems and technologies is described, and the beneficial aspects of a particular transmission technique- spread spectrum-are discussed. We then discuss in more detail several potential spectral regions, in terms of propagation conditions, available technology, spectrum availability, and waveform selection. Some comments on the need for standardization are also provided. We note that none of the existing systems described will likely meet the full range of desired features of a new ADL, but that several systems and spectral regions offer promise in terms of one or more characteristics. A system design and analysis approach is then provided. In this, we again focus on the lower few layers of the protocol stack, and aim to capture the main features and parameters that must be selected in the design. Two appendices show example versions and initial results of the first few technical steps in the design approach. Some conclusions are then drawn, and in the final section, recommendations are provided, the most important of which are repeated here: 1. Continue the effort begun here. As detailed in this report, we have only uncovered much of the work that needs to be done in order to provide the foundation for a flexible, high- performance, robust ADL. 2. Seize the opportunity to begin testing in the MLS band. The wide bandwidths and low level of usage of this band make it an ideal one for proof-of-concept type testing. Other (non- aeronautical) organizations are likely to make claims on the band if it is not being used. The primary conclusion is that there is a real and pressing need for a new aviation data link. vi

Matolak, David W.↗

DOE OSTI2023

Precursor Analysis Report: SQL Slammer Worm Infection of Davis-Besse Nuclear Power Plant 2003

The SQL Slammer Worm Infection of Davis-Besse Nuclear Power Plant 2003 Precursor Analysis Report leverages publicly available information about Davis-Besse’s 2003 cyber attack and catalogs anomalous observables for each technique employed in the attack. This analysis is based upon the methodology of the Cybersecurity for the Operational Technology Environment (CyOTE) program. On 25 January 2003, the SQL Slammer worm infected more than 90% of vulnerable hosts and crashed the internet in 10 to 15 minutes, making it one of the fastest spreading worms in history. SQL Slammer is a fileless, memory-resident worm that remotely exploits a stack-based buffer overflow vulnerability on local hosts to intensively scan and rapidly self-propagate across the internet. The worm infected approximately 300,000 unpatched hosts running Microsoft Structured Query Language (SQL) Server 2000 or Microsoft Desktop Engine (MSDE) 2000 with SQL Server Resolution Service. The SQL Slammer worm indirectly infected FirstEnergy’s Davis-Besse nuclear power plant by first infecting a consultant’s company network server and then propagating through an external misconfigured connection into Davis-Besse’s site network. The infection caused major network congestion, slow performance, data overloads, and the inability of local hosts to communicate with each other, which eventually caused a loss of availability and a loss of view when the Safety Parameter Display System (SPDS) and Plant Process Computer (PPC) crashed. At the time of the infection, the plant was already offline, the digital monitoring systems had redundant analog backups, and the plant control and safety functions were not affected, so there were no concerns of a safety breach. However, this incident resulted in many lessons learned and spawned important discussions about cybersecurity’s role in nuclear safety and electric power reliability regulation, policy, and guidance. Researchers and analysts identified 10 unique techniques utilized during the attack with a total of 640 observables using MITRE ATT&CK® for Industrial Control Systems. The CyOTE program assesses observables accompanying techniques used prior to the triggering event to identify opportunities to detect malicious activity. If observables accompanying the attack techniques are perceived and investigated prior to the triggering event, earlier comprehension of malicious activity can take place. Eight of the identified techniques used during Davis-Besse cyber attack were precursors to the triggering event. Analysis identified 596 observables associated with these precursor techniques, 428 of which were assessed to have an increased likelihood of being perceived in the 331 days preceding the triggering event. The response and comprehension time could have been reduced if the observables had been identified earlier. The information gathered in this report contributes to a library of observables tied to a repository of artifacts, data sources, and technique detection references for practitioners and developers to support the comprehension of indicators of attack. Asset owners and operators can use these products if they experience similar observables or to prepare for comparable scenarios.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

NASA NTRS1977

CTS TEP thermal anomalies: Heat pipe system performance

A part of the investigation is summarized of the thermal anomalies of the transmitter experiment package (TEP) on the Communications Technology Satellite (CTS) which were observed on four occasions in 1977. Specifically, the possible failure modes of the variable conductance heat pipe system (VCHPS) used for principal thermal control of the high-power traveling wave tube in the TEP are considered. Further, the investigation examines how those malfunctions may have given rise to the TEP thermal anomalies. Using CTS flight data information, ground test results, analysis conclusions, and other relevant information, the investigation concentrated on artery depriming as the most likely VCHPS failure mode. Included in the study as possible depriming mechanisms were freezing of the working fluid, Marangoni flow, and gas evolution within the arteries. The report concludes that while depriming of the heat pipe arteries is consistent with the bulk of the observed data, the factors which cause the arteries to deprime have yet to be identified.

Marcus, B. D.↗

NASA NTRS2006

Technology Developments Integrating a Space Network Communications Testbed

As future manned and robotic space explorations missions involve more complex systems, it is essential to verify, validate, and optimize such systems through simulation and emulation in a low cost testbed environment. The goal of such a testbed is to perform detailed testing of advanced space and ground communications networks, technologies, and client applications that are essential for future space exploration missions. We describe the development of new technologies enhancing our Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE) that enable its integration in a distributed space communications testbed. MACHETE combines orbital modeling, link analysis, and protocol and service modeling to quantify system performance based on comprehensive considerations of different aspects of space missions. It can simulate entire networks and can interface with external (testbed) systems. The key technology developments enabling the integration of MACHETE into a distributed testbed are the Monitor and Control module and the QualNet IP Network Emulator module. Specifically, the Monitor and Control module establishes a standard interface mechanism to centralize the management of each testbed component. The QualNet IP Network Emulator module allows externally generated network traffic to be passed through MACHETE to experience simulated network behaviors such as propagation delay, data loss, orbital effects and other communications characteristics, including entire network behaviors. We report a successful integration of MACHETE with a space communication testbed modeling a lunar exploration scenario. This document is the viewgraph slides of the presentation.

hybrid simulation↗

NASA NTRS2011

Improvements to the Ionizing Radiation Risk Assessment Program for NASA Astronauts

To perform dosimetry and risk assessment, NASA collects astronaut ionizing radiation exposure data from space flight, medical imaging and therapy, aviation training activities and prior occupational exposure histories. Career risk of exposure induced death (REID) from radiation is limited to 3 percent at a 95 percent confidence level. The Radiation Health Office at Johnson Space Center (JSC) is implementing a program to integrate the gathering, storage, analysis and reporting of astronaut ionizing radiation dose and risk data and records. This work has several motivations, including more efficient analyses and greater flexibility in testing and adopting new methods for evaluating risks. The foundation for these improvements is a set of software tools called the Astronaut Radiation Exposure Analysis System (AREAS). AREAS is a series of MATLAB(Registered TradeMark)-based dose and risk analysis modules that interface with an enterprise level SQL Server database by means of a secure web service. It communicates with other JSC medical and space weather databases to maintain data integrity and consistency across systems. AREAS is part of a larger NASA Space Medicine effort, the Mission Medical Integration Strategy, with the goal of collecting accurate, high-quality and detailed astronaut health data, and then securely, timely and reliably presenting it to medical support personnel. The modular approach to the AREAS design accommodates past, current, and future sources of data from active and passive detectors, space radiation transport algorithms, computational phantoms and cancer risk models. Revisions of the cancer risk model, new radiation detection equipment and improved anthropomorphic computational phantoms can be incorporated. Notable hardware updates include the Radiation Environment Monitor (which uses Medipix technology to report real-time, on-board dosimetry measurements), an updated Tissue-Equivalent Proportional Counter, and the Southwest Research Institute Radiation Assessment Detector. Also, the University of Florida hybrid phantoms, which are flexible in morphometry and positioning, are being explored as alternatives to the current NASA computational phantoms.

Semones, E. J.↗

NASA NTRS2019

Use of UAS Reports (UREPs) during TCL3 Field Testing

During the NASA Unmanned Aircraft System (UAS) Traffic Management (UTM) Project’s Technical Capability Level 3 (TCL3) demonstration, a service for stakeholders to share weather and aircraft observations was tested. The overall goal was to increase awareness of airspace and weather activity to increase a pilot’s ability to fly safely. To achieve this goal, a mechanism to share data was created, called “UAS Reports” or UREPs, which were generated by client systems and sent to a central data service. The data service provided subscriptions and allowed for data requests to share the reports that had been sent in by stakeholders. To execute this functionality, four FAA (Federal Aviation Administration)-designated UAS test sites performed UREP testing as part of TCL3. NASA provided the centralized service and test site partners flew missions and simulated activity at the test sites to generate data to send to the service. The loop was closed by having other clients (usually other small UAS operators) request those data from the service or subscribe to feeds from the service. Overall, the tests demonstrated the utility of such a service. In this report, the testing setup, data collection, and analysis of results are presented. The concept of UREPs has since been incorporated as a service within NASA’s Conflict Mitigation Model for UTM. The concept will continue to be tested in NASA’s TCL4 activities.

UTM↗

DOE OSTI2020

Co-op at Sandia National Laboratories (July - December 2019, Final Report)

This co-op was performed at Sandia National Laboratories (SNL) within the Weapon Surety Engineering 11 Department (9435), which is a customer-focused organization that provides engineering and system analysis expertise to ensure a safe deterrent throughout the entire weapon lifecycle. Engineers in 9435 develop a deep knowledge in both component and system function to support rigorous evaluation and mitigation of potential failure modes. They operate across multiple engineering disciplines (mechanical, electrical, computer, materials and systems engineering) with opportunities to develop crossdisciplinary capability. The team supports a variety of stockpile systems and is part of the product teams during development, design and production, as well as advanced concept and exploratory efforts. 9435 engineers use their extensive component and system knowledge, as well as experimental data and modeling, to ensure products function as intended with assured safety. Members of the department learn the function of multiple components, how those components integrate within the system and apply surety principles and processes to ensure a safe, secure, reliable, and effective U.S. nuclear deterrent.

42 ENGINEERING↗

DOE OSTI2022

Port of New York and New Jersey Drayage Electrification Analysis

The National Renewable Energy Laboratory (NREL) evaluated the potential for drayage electrification in the Port of New York and New Jersey (PoNYNJ), with a focus on operators: Harbor Freight Transport (HF), Safeway Trucking (SWT), and International Motor Freight Inc (IMF). This report summarizes the data collection and electrification evaluation of all three drayage operators, includes detailed operational data, and identifies the performance requirements for battery electric tractors (BETs) and corresponding infrastructure operated within the context of PoNYNJ drayage operation. This report also details a methodology to evaluate opportunities, strategies, and challenges associated with future expansions of BETs in meeting PANYNJ emissions goals. The Port Authority has established a goal of achieving Net Zero carbon emissions by 2050 across all facilities, including from tenant and stakeholder sources such as drayage trucks. NREL used real-world performance data collected on the three PoNYNJ drayage operations, along with modeling and analysis tools to compare BET to diesel trucks. From March to July 2021, NREL collected 1Hz vehicle and engine data from 46 drayage trucks at the three operators totaling nearly 121,000 miles of operation, providing enough information to assess vehicle operations for electrification potential. A Future Automotive Systems Technology Simulator (FASTSim) electric truck powertrain model was validated using PoNYNJ data and scenarios were run to evaluate drayage truck electrification requirements over the real-world cycles. The first scenario examined BET viability with minimal changes to existing operations. This assumes the trucks charge when stopped for two hours or longer, have a functional battery size of 375 kWh, and can charge at 270 kilowatts (kW) average which are the specification of the commercially available Freightliner eCascadia. The second scenario looked at what operational, charging infrastructure, and BET technology changes would be needed to fully electrify. Finally, detailed analysis was run on charging rate structure to understand operational costs to the fleets. The studied drayage trucks averaged 5.1 MPG, spent roughly 9% of their energy at idle, and drove an average of 140 miles per day with a maximum daily distance of 573 miles. The FASTSim model results indicate a comparable BET would use 417 kWh of energy per day on average accounting for cargo weight, which is close to the full usable capacity of the eCascadia currently available on the market. Based on the daily average operating data, partial fleet electrification is possible with current technology. However, some specific days of operation would require over 1,600 kWh of energy due to longer distances traveled by the trucks and more intense operation. Trucks used for long distance and intense operation cannot be readily electrified with current technology without operational changes. Full adoption of BETs could reduce CO 2 emissions from these fleets by roughly 75% today, eliminating 76 metric tons of CO 2 (MTCO 2 ) per vehicle each year, which equates to 24,100 MTCO 2 per year for all three operators. Commercially available direct current fast chargers (DCFC) have charge rates up to 350 kW. Based on the average daily modeled energy use for each operator, current industrial rate structures, and the assumption of 350 kW peak charging, full drayage electrification would increase electricity consumption. In addition, peak demand usage would increase with unmanaged charging along with cost of electricity having a direct impact on cost per mile for electric vehicles. The resulting cost per mile for BETs along with comparable cost per mile for conventional diesel trucks are also examined at $\$$4.00 per gallon of diesel. It will be important for PANYNJ and the drayage operators within the PoNYNJ to consider these load impacts to their existing electrical infrastructure and devise operational strategies that avoid coincident charging of vehicles to mitigate demand charges. Despite these electricity cost increases, savings from reductions in diesel consumption will help offset the costs of this increased electricity consumption. However, prices of both electricity and diesel are subject to change based on various factors meaning the realized savings will vary over time. This shows BETs could be cost-competitive on an energy cost per mile basis for all scenarios while diesel is above $\$$3.00/gal. Further, if diesel prices dropped to the 15-year low of $2.33/gal, it would still be cost competitive to operate the EVs with electricity costs of 16.3 ¢/kWh or less.

33 ADVANCED PROPULSION SYSTEMS↗

NASA NTRS1986

An experiment in software reliability

The results of a software reliability experiment conducted in a controlled laboratory setting are reported. The experiment was undertaken to gather data on software failures and is one in a series of experiments being pursued by the Fault Tolerant Systems Branch of NASA Langley Research Center to find a means of credibly performing reliability evaluations of flight control software. The experiment tests a small sample of implementations of radar tracking software having ultra-reliability requirements and uses n-version programming for error detection, and repetitive run modeling for failure and fault rate estimation. The experiment results agree with those of Nagel and Skrivan in that the program error rates suggest an approximate log-linear pattern and the individual faults occurred with significantly different error rates. Additional analysis of the experimental data raises new questions concerning the phenomenon of interacting faults. This phenomenon may provide one explanation for software reliability decay.

Dunham, J. R.↗

NASA NTRS2019

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

Here we investigate the effects of erosion and weathering that occur on III-V cover-glass interconnected cells (CICs) after exposure to Mars dust storm conditions. The durability of these materials in a Martian environment is not well characterized so we perform analogous experimentation. To replicate the dust impingement, test coupons were placed in an enclosure and sandblasted with Mars dust simulant. We show the J-V response dependency on both incident angle and exposure times. We find that the simulated Martian dust storm often results in damage to the anti-reflective coating and subsequent reduced short circuit current. Reduction in the open circuit voltage is observed, likely caused by structural damage to the crystal lattice after CIC fracture. We employ data-driven modeling to determine a performance degradation rate that is consistent with zero within uncertainty. We also quantify the soiling contribution and power degradation of the photovoltaic cells on Mars through analysis of 4.95 Martian years of report-out power conditions from the Opportunity rover. We find that atmospheric dust suspended due to a weather event does not result in instantaneous settled dust on the PV cells. We calculate via autocorrelation function that the dust settling rate is approximately 21 Sols from atmospheric dust suspension. The findings presented here deliver a realistic approximation for the insolation values and subsequent PV power expected over time on the Martian surface thus informing future dust abatement systems.

McMillon-Brown, Lyndsey↗

NASA NTRS2019

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

McMillon-Brown, Lyndsey↗

NASA NTRS2020

Modeling the Uncertainties of Solar System Ephemerides for Robust Gravitational-wave Searches with Pular-timing Arrays

The regularity of pulsar emissions becomes apparent once we reference the pulses’ times of arrivals to the inertial rest frame of the solar system. It follows that errors in the determination of Earthʼs position with respect to the solar system barycenter can appear as a time-correlated bias in pulsar-timing residual time series, affecting the searches for low-frequency gravitational waves performed with pulsar-timing arrays. Indeed, recent array data sets yield different gravitational-wave background upper limits and detection statistics when analyzed with different solar system ephemerides. Crucially, the ephemerides do not generally provide usable error representations. In this article, we describe the motivation, construction, and application of a physical model of solar system ephemeris uncertainties, which focuses on the degrees of freedom (Jupiterʼs orbital elements) most relevant to gravitational-wave searches with pulsar-timing arrays. This model, BAYESEPHEM, was used to derive ephemeris-robust results in NANOGravʼs 11 yr stochastic-background search, and it provides a foundation for future searches by NANOGrav and other consortia. The analysis and simulations reported here suggest that ephemeris modeling reduces the gravitational-wave sensitivity of the 11 yr data set and that this degeneracy will vanish with improved ephemerides and with pulsar-timing data sets that extend well beyond a single Jovian orbital period.

M Vallisneri↗

DOE OSTI2026

Testing and Expertise for Marine Energy (TEAMER) Program Support (CRADA Final Report)

Virginia Tech (VT) had previously developed a 50 kW AC to DC power converter that is specifically designed to improve the performance and efficiency of wave energy converters (WECs). Through this CRADA, NLR will test the VT power converter via a coupled dynamometer and power electronics test platform. The NLR test platform will be comprised of (1) a rotary dynamometer that will drive a VT provided gearbox and generator, (2) one or more DC regenerative power supplies that provide input power to and take power from the VT supplied power electronics, and (3) a data acquisition system for measurement. NLR will work with VT to develop a test plan, set up the test platform and integrate the test article, perform the testing, and assist in the data analysis.

16 TIDAL AND WAVE POWER↗

DOE OSTI2021

Assessing the Consistency of Estimated Ground Cover Fractions between the BLM AIM Method and Optical Remote Sensing Method

Since 2012, Argonne National Laboratory (Argonne) has supported the Bureau of Land Management (BLM) in developing remote sensing methodologies for long-term environmental monitoring of Palo Verde Mesa in eastern Riverside County, California, including methods for: detailed mapping of ephemeral streams, estimating fractional cover of desert-land surface components (e.g., trees, shrubs, litters, and bare ground), evaluating erosion risk or land stability, and characterizing vegetation alliances using spatial structure and geostatistical approaches. These studies showed the promise of remote sensing for monitoring changes in desert landscapes by providing information that would be difficult to obtain through field surveys. During this time the BLM has also worked to establish long-term monitoring protocols and compiled field-observation data collected using standardized protocols from the Assessment, Inventory, and Monitoring (AIM) strategy. The AIM data can be compared to data derived from remote sensing methods to evaluate their relative operational utility in monitoring landscape change. If ground cover estimated using remotely sensed imagery is comparable to AIM ground cover estimates, then remote sensing can be used to monitor whether any land cover change in desert landscapes may be related to solar energy development. Therefore, the goal of this study was to determine the consistency in ground cover estimates between AIM data and those derived from publicly- available remotely sensed imagery, such as that available through the U.S. Department of Agriculture, National Agricultural Imagery Program (NAIP), to examine feasibility of a remote sensing method for complementing AIM monitoring. Based on the image analysis in this study, we also provide recommendations for how small unmanned aerial system (sUAS) data may be used to complement BLM’s AIM data and NAIP imagery for future vegetation monitoring. The ground cover types we originally planned to investigate were trees, shrubs, and bare ground. However, the small sample size and a limited range of cover fraction of trees and shrubs in the AIM dataset (e.g., 33 samples with a maximum shrub cover of 18%, 14 samples with a maximum tree cover of 17%) did not allow for performing a meaningful evaluation for the remote sensing approach. Therefore, we conducted the study focusing on bare ground, foliar, and rock cover, all of which are indicators reported in the AIM remote sensing dataset.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Integrated Off-Gas System Tests on the DM1200 Melter with RPP-WTP LAW Sub-Envelope Bl Simulants, VSL-03R3851-1, Rev. 0 (Oct 2003)

The report documents melter and off-gas performance results obtained on the DM1200 melter during processing of LAW Sub-Envelope B1 feed. The principal objectives of the DM1200 melter testing were to demonstrate suitable processing and production rates for LAW B1 feed; characterize the glass product for elemental composition; measure elemental emission rates and decontamination factors (DFs) across the melter and off-gas treatment components; and provide additional data on the performance of the thermal catalytic oxidation and selective catalytic reduction (TCO/SCR) unit efficiency in treating organic emissions. The feed was spiked with organic compounds for part of the testing duration. All data were collected for use in engineering and system design purposes. No sampling and analysis to collect environmental data was performed during these tests.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS2000

Automatic Weather Station (AWS) Lidar

An autonomous, low-power atmospheric lidar instrument is being developed at NASA Goddard Space Flight Center. This compact, portable lidar will operate continuously in a temperature controlled enclosure, charge its own batteries through a combination of a small rugged wind generator and solar panels, and transmit its data from remote locations to ground stations via satellite. A network of these instruments will be established by co-locating them at remote Automatic Weather Station (AWS) sites in Antarctica under the auspices of the National Science Foundation (NSF). The NSF Office of Polar Programs provides support to place the weather stations in remote areas of Antarctica in support of meteorological research and operations. The AWS meteorological data will directly benefit the analysis of the lidar data while a network of ground based atmospheric lidar will provide knowledge regarding the temporal evolution and spatial extent of Type la polar stratospheric clouds (PSC). These clouds play a crucial role in the annual austral springtime destruction of stratospheric ozone over Antarctica, i.e. the ozone hole. In addition, the lidar will monitor and record the general atmospheric conditions (transmission and backscatter) of the overlying atmosphere which will benefit the Geoscience Laser Altimeter System (GLAS). Prototype lidar instruments have been deployed to the Amundsen-Scott South Pole Station (1995-96, 2000) and to an Automated Geophysical Observatory site (AGO 1) in January 1999. We report on data acquired with these instruments, instrument performance, and anticipated performance of the AWS Lidar.

Rall, Jonathan A.R.↗

NASA NTRS2017

The Flight Optimization System Weights Estimation Method

FLOPS has been the primary aircraft synthesis software used by the Aeronautics Systems Analysis Branch at NASA Langley Research Center. It was created for rapid conceptual aircraft design and advanced technology impact assessments. FLOPS is a single computer program that includes weights estimation, aerodynamics estimation, engine cycle analysis, propulsion data scaling and interpolation, detailed mission performance analysis, takeoff and landing performance analysis, noise footprint estimation, and cost analysis. It is well known as a baseline and common denominator for aircraft design studies. FLOPS is capable of calibrating a model to known aircraft data, making it useful for new aircraft and modifications to existing aircraft. The weight estimation method in FLOPS is known to be of high fidelity for conventional tube with wing aircraft and a substantial amount of effort went into its development. This report serves as a comprehensive documentation of the FLOPS weight estimation method. The development process is presented with the weight estimation process.

Wells, Douglas P.↗

NASA NTRS2008

Venus Quadrangle Geological Mapping: Use of Geoscience Data Visualization Systems in Mapping and Training

We are currently investigating new technological developments in computer visualization and analysis in order to assess their importance and utility in planetary geological analysis and mapping [1,2]. Last year we reported on the range of technologies available and on our application of these to various problems in planetary mapping [3]. In this contribution we focus on the application of these techniques and tools to Venus geological mapping at the 1:5M quadrangle scale. In our current Venus mapping projects we have utilized and tested the various platforms to understand their capabilities and assess their usefulness in defining units, establishing stratigraphic relationships, mapping structures, reaching consensus on interpretations and producing map products. We are specifically assessing how computer visualization display qualities (e.g., level of immersion, stereoscopic vs. monoscopic viewing, field of view, large vs. small display size, etc.) influence performance on scientific analysis and geological mapping. We have been exploring four different environments: 1) conventional desktops (DT), 2) semi-immersive Fishtank VR (FT) (i.e., a conventional desktop with head-tracked stereo and 6DOF input), 3) tiled wall displays (TW), and 4) fully immersive virtual reality (IVR) (e.g., "Cave Automatic Virtual Environment," or Cave system). Formal studies demonstrate that fully immersive Cave environments are superior to desktop systems for many tasks [e.g., 4].

Head, James W.↗