Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

TH-AB-209-09: Quantitative Imaging of Electrical Conductivity by VHF-Induced Thermoacoustics

Purpose: To demonstrate that very high frequency (VHF) induced thermoacoustics has the potential to provide quantitative images of electrical conductivity in Siemens/meter, much as shear wave elastography provides tissue stiffness in kPa. Quantitatively imaging a large organ requires exciting thermoacoustic pulses throughout the volume and broadband detection of those pulses because tomographic image reconstruction preserves frequency content. Applying the half-wavelength limit to a 200-micron inclusion inside a 7.5 cm diameter organ requires measurement sensitivity to frequencies ranging from 4 MHz down to 10 kHz, respectively. VHF irradiation provides superior depth penetration over near infrared used in photoacoustics. Additionally, VHF signal production is proportional to electrical conductivity, and prostate cancer is known to suppress electrical conductivity of prostatic fluid. Methods: A dual-transducer system utilizing a P4-1 array connected to a Verasonics V1 system augmented by a lower frequency focused single element transducer was developed. Simultaneous acquisition of VHF-induced thermoacoustic pulses by both transducers enabled comparison of transducer performance. Data from the clinical array generated a stack of 96-images with separation of 0.3 mm, whereas the single element transducer imaged only in a single plane. In-plane resolution and quantitative accuracy were measured at isocenter. Results: The array provided volumetric imaging capability with superior resolution whereas the single element transducer provided superior quantitative accuracy. Combining axial images from both transducers preserved resolution of the P4-1 array and improved image contrast. Neither transducer was sensitive to frequencies below 50 kHz, resulting in a DC offset and low-frequency shading over fields of view exceeding 15 mm. Fresh human prostates were imaged ex vivo and volumetric reconstructions reveal structures rarely seen in diagnostic images. Conclusion: Quantitative whole-organ thermoacoustic tomography will be feasible by sparsely interspersing transducer elements sensitive to the low end of the ultrasonic range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Origin of core-to-core x-ray emission spectroscopy sensitivity to structural dynamics

Recently, coherent structural dynamics in the excited state of an iron photosensitizer was observed through oscillations in the intensity of Kα x-ray emission spectroscopy (XES). Understanding the origin of the unexpected sensitivity of core-to-core transitions to structural dynamics is important for further development of femtosecond time-resolved XES methods and, we believe, generally necessary for interpretation of XES signals from highly non-equilibrium structures that are ubiquitous in photophysics and photochemistry. Here, we use multiconfigurational wavefunction calculations combined with atomic theory to analyze the emission process in detail. The sensitivity of core-to-core transitions to structural dynamics is due to a shift of the minimum energy metal–ligand bond distance between 1s and 2p core-hole states. A key effect is the additional contraction of the non-bonding 3s and 3p orbitals in 1s core-hole states, which decreases electron– electron repulsion and increases overlap in the metal–ligand bonds. The effect is believed to be general and especially pronounced for systems with strong bonds. The important role of 3s and 3p orbitals is consistent with the analysis of radial charge and spin densities and can be connected to the negative chemical shift observed for many transition metal complexes. The XES sensitivity to structural dynamics can be optimized by tuning the emission energy spectrometer, with oscillations up to ±4% of the maximum intensity for the current system. The theoretical predictions can be used to design experiments that separate electronic and nuclear degrees of freedom in ultrafast excited state dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitivity analysis of add-on price estimate for select silicon wafering technologies

The cost of producing wafers from silicon ingots is a major component of the add-on price of silicon sheet. Economic analyses of the add-on price estimates and their sensitivity internal-diameter (ID) sawing, multiblade slurry (MBS) sawing and fixed-abrasive slicing technique (FAST) are presented. Interim price estimation guidelines (IPEG) are used for estimating a process add-on price. Sensitivity analysis of price is performed with respect to cost parameters such as equipment, space, direct labor, materials (blade life) and utilities, and the production parameters such as slicing rate, slices per centimeter and process yield, using a computer program specifically developed to do sensitivity analysis with IPEG. The results aid in identifying the important cost parameters and assist in deciding the direction of technology development efforts.

Mokashi, A. R.↗

Enhancing microsegregation during rapid directional solidification through ternary microalloying

The nano-cellular dendritic microstructure formed during rapid directional solidification in powder bed fusion additive manufacturing creates unique properties such as simultaneous improvement in strength and ductility. However, process control of microsegregation features remains challenging due to low sensitivity of critical solidification mechanisms to process parameters. This study leverages microalloying to achieve large changes in dendrite composition, microstructure, and interdendritic zone width during laser powder bed fusion without modifying process parameters. CALPHAD simulations predict that the addition of Zr significantly steepens the solidus line of the dilute Cu-Cr alloy system, leading to enhanced Cr rejection into the melt and greater than 95% reduction in solubility of Cr in the solidified Cu matrix. Experimental validation using time-of-flight secondary ion mass spectrometry and Kelvin probe force microscopy reveals that the ternary alloy containing 0.01 wt% Zr exhibited wider interdendritic regions compared to the binary, a significantly higher number of Cr-rich particles within interdendritic regions, near-complete ejection of oxygen impurities from the matrix, and greater nanoscale work function contrast. These features indicate more aggressive Cr segregation in the presence of Zr and a purer Cu matrix and provide a potentially robust method for engineering the nano-cellular dendritic solidification microstructure.

CALPHAD↗

Highly sensitive and accurate optical thermometer through Er doped tellurite glasses

Highlights: • Upconversion mechanisms of transparent Er{sup 3+} doped tellurite glasses are discussed. • Sensitivity of the thermometer based on the FIR technique increases monotonously with the decreasing doping concentration. • Highly sensitive and accurate optical thermometer is achieved using low doping sample as the probe and high power laser as the pumping source. - Abstract: We investigate the thermal effects of Er{sup 3+} doped tellurite glasses on the upconversion properties. It is found that the sensitivity of the thermometer based on the FIR technique increases monotonously with the decreasing doping concentration. However, low doping leads to weak upconversion intensity and further decrease the sensing accuracy, which makes it difficult to achieve the high sensitivity and accuracy simultaneously. Influences of the irradiating laser power on the sensing behaviors were studied in the purpose of enhancing the signal intensity. It is found that the heating effect of incident laser (up to hundreds of mW) can be neglected, indicating the feasibility of using high laser power and low doping sample to produce both high sensitivity and high accuracy. In addition, this paper respectively discusses the mechanisms of the upconversion processes and the concentration dependent sensitivity.

36 MATERIALS SCIENCE↗

LET Spectrum Measurements In CR-39 PNTD With AFM

Energetic protons, neutrons, and heavy ions undergoing collisions with target nuclei of varying Z can produce residual heavy recoil fragments via intra-nuclear cascade/evaporation reactions. The particles produced in these non-elastic collisions generally have such extremely short range ({approx}<10 {mu}m) that they cannot be directly observed by conventional detection methods including CR-39 plastic nuclear track detector (PNTD) that has been chemically etched for analysis by standard visible light microscopy. However, high-LET recoil fragments having range on the order of several cell diameters can be produced in tissue during radiotherapy using proton and carbon beams. We have developed a method to analyze short-range, high-LET tracks in CR-39 plastic nuclear track detector (PNTD) using short duration chemical etching ({approx}<1 {mu}m) following by automated atomic force microscope (AFM) scanning. The post-scan data processing used in this work was based on semi-automated matrix analysis opposed to traditional grey-scale image analysis. This method takes advantage of the 3-D data obtained via AFM to achieve robust discrimination of nuclear tracks from other features inherently present in the post-etch detector surface. Through automation of AFM scanning, sufficient AFM scan frames were obtained to attain an LET spectrum spanning the LET range from 200-1500 keV/{mu}m. In addition to our experiments, simulations were carried out with the Monte Carlo transport code, FLUKA. To demonstrate this method, CR-39 PNTD was exposed to the proton therapy beam at Loma Linda University Medical Center (LLUMC) at 60 and 230 MeV. Additionally, detectors were exposed to 1 GeV protons at the NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL). For these exposures CR-39 PNTD, Al and Cu target foils were used between detector layers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced piezoresistive sensing of fiber-reinforced composites via embedded nanoparticles

Carbon fiber composites offer outstanding structural performance with high specific strength and are experiencing significant commercial adoption as the fiber price continues to decrease. Composite research efforts now need to focus on creating multifunctional composites, which can offer sensing capabilities in addition to structural attributes. This work focuses on creating multifunctional carbon fiber composites with structural health monitoring capabilities through the integration of piezoresistive nanoparticles on the surface of carbon fiber. Prior research introduced the development of coating silicon carbide nanoparticles on the surface of carbon fiber in a continuous feed-through process to achieve increased SHM sensitivity with enhanced interlaminar strength and tunable mechanical damping properties. One benefit of that coating process is the compatibility with various nanomaterials. This research capitalizes on that benefit by coating different nanoparticles, such as titanium dioxide, on carbon fiber to further enhance the sensing capabilities. A modification to the prior coating process is made in this research to enable significantly higher nanoparticle loading to be achieved. The resulting composites more accurately measure an applied force by responding with a more profound electrical resistance change. This research lays the foundation for efficiently integrating nanoparticles onto fibers leading to homogenously dispersed nanoparticles throughout a fiber reinforced composite for multifunctional performance.

Bowland, Christopher↗

Measurements of B to V(Gamma) Decays

The standard model has been highly successful at describing current experimental data. However, extensions of the standard model predict particles that have masses at energy scales that are above the electroweak scale. The flavor-changing neutral current processes of the B meson are sensitive to the influences of these new physics contributions. These processes proceed through loop diagrams, thus allowing new physics to enter at the same order as the standard model. New physics may contribute to the enhancement or suppression of rate asymmetries or the decay rates of these processes. The transition B {yields} V{gamma} (V = K*(892), {rho}(770), {omega}(782), {phi}(1020)) represents radiative decays of the B meson that proceed through penguin processes. Hadronic uncertainties limit the theoretical accuracy of the prediction of the branching fractions. However, uncertainties, both theoretical and experimental, are much reduced when considering quantities involving ratios of branching fractions, such as CP or isospin asymmetries. The most dominant exclusive radiative b {yields} s transition is B {yields} K*{gamma}. We present the best measurements of the branching fractions, direct CP, and isospin asymmetries of B {yields} K*{gamma}. The analogous b {yields} d transitions are B {yields} {rho}{gamma} and B {yields} {omega}{gamma}, which are suppressed by a factor of |V{sub td}/V{sub ts}|{sup 2} {approx} 0.04 relative to B {yields} K*{gamma}. A measurement of the branching fractions and isospin asymmetry of B{sup +} {yields} {rho}{sup +}{gamma} and B{sup 0} {yields} {rho}{sup 0}{gamma}, as well as a search for B {yields} {omega}{gamma}, are also given. These measurements are combined to calculate the ratio of CKM matrix elements |V{sub td}/V{sub ts}|, which corresponds to the length of one side of the unitary triangle. Finally, we present a search for the penguin annihilation process B {yields}{phi}{gamma}. We use a sample of 383 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy B factory for the analysis of B {yields} K*{gamma}. We measure the branching fractions {Beta}(B{sup 0} {yields} K*{sup 0}{gamma}) = (4.47 {+-} 0.10 {+-} 0.16) x 10{sup -5} and {Beta}(B{sup +} {yields} K*{sup +}{gamma}) = (4.22 {+-} 0.14 {+-} 0.16) x 10{sup -5}. We measure the direct CP asymmetry to be -0.033 < {Alpha}{sub CP} (B {yields} K*{gamma}) < 0.028 and the isospin asymmetry to be 0.017 < {Delta}{sub 0-} < 0.116, where the limits are determined at the 90% C.L. and include both the statistical and systematic uncertainties. Using a sample of 347 million B{bar B} events, we measure the branching fractions {Beta}(B{sup +} {yields} {rho}{sup +}{gamma}) = (1.10{sub -0.33}{sup +0.37} {+-} 0.09) x 10{sup -6} and {Beta}(B{sup 0} {yields} {rho}{sup 0}{gamma}) = (0.79{sub -0.20}{sup +0.22} {+-} 0.06) x 10{sup -6}, the isospin asymmetry {Delta} = -0.35 {+-} 0.27, and set a 90% C.L. upper limit {Beta}(B {yields} {omega}{gamma}) < 0.78 x 10{sup -6}. We also measure the isospin-averaged branching fraction {Beta}(B {yields} ({rho}/{omega}){gamma}) = (1.25{sub -0.24}{sup +0.25} {+-} 0.09) x 10{sup -6}, from which we determine |V{sub td}/V{sub ts}|= 0.200{sub -0.020}{sup +0.021} {+-} 0.015, where the first uncertainty is experimental and the second theoretical. Finally, a sample of 124 million B{bar B} events is used to set an upper limit of {Beta}(B {yields} {phi}{gamma}) < 8.5 x 10{sup -7} at the 90% C.L.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adjoint-enabled multidimensional optimization of satellite electron/proton shields - 25452

The design of satellites usually includes the objective of minimizing mass due to high launch costs, which is complicated by the need to protect sensitive electronics from the space radiation environment. There is growing interest in automated design optimization techniques to help achieve that objective. Traditional optimization approaches that rely exclusively on response functions (e.g. dose calculations) can be quite expensive when applied to transport problems. Previously we showed how adjoint-based transport sensitivities used in conjunction with gradient-based optimization algorithms can be quite effective in designing mass-efficient electron/proton shields in one-dimensional slab geometries. In this paper we extend that work to two-dimensional Cartesian geometries. This consists primarily of deriving the sensitivities to geometric changes, given a particular prescription for parameterizing the shield geometry. We incorporate these sensitivities into our optimization process and demonstrate their effectiveness in such design calculations. (authors)

42 ENGINEERING↗

Optimization of the muon stopping target for the MU2E collaboration [Thesis]

The Mu2e Experiment utilizes state of the art accelerators, superconducting magnets, detectors, electronics, and other equipment to maximize the sensitivity to such a rare process. Many of the components of the Mu2e hardware are critical to the overall physics capability of the experiment. The muon stopping target, where muons are stopped and may interact via this very rare process, is one such component where any improvements beyond the base design can have a significant impact on the experiment. This thesis explores possible modifications to the geometry of the muon stopping target. The goal is to determine if any modifications can improve the sensitivity of observing the muon conversion process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Accelerating Net Terrestrial Carbon Uptake During the Warming Hiatus Due to Reduced Respiration

The recent warming hiatus presents an excellent opportunity to investigate climate sensitivity of carbon cycle processes. Here we combine satellite and atmospheric observations to show that the rate of net biome productivity (NBP) has significantly accelerated from - 0.007 +/- 0.065 PgC yr(exp -2) over the warming period (1982 to 1998) to 0.119 +/- 0.071 PgC yr(exp -2) over the warming hiatus (19982012). This acceleration in NBP is not due to increased primary productivity, but rather reduced respiration that is correlated (r = 0.58; P = 0.0007) and sensitive ( y = 4.05 to 9.40 PgC yr(exp -1) per C) to land temperatures. Global land models do not fully capture this apparent reduced respiration over the warming hiatus; however, an empirical model including soil temperature and moisture observations better captures the reduced respiration.

Ballantyne, Ashley↗

Electrical alternans during rest and exercise as predictors of vulnerability to ventricular arrhythmias

This investigation was performed to evaluate the feasibility of detecting repolarization alternans with the heart rate elevated with a bicycle exercise protocol. Sensitive spectral signal-processing techniques are able to detect beat-to-beat alternation of the amplitude of the T wave, which is not visible on standard electrocardiogram. Previous animal and human investigations using atrial or ventricular pacing have demonstrated that T-wave alternans is a marker of vulnerability to ventricular arrhythmias. Using a spectral analysis technique incorporating noise reduction signal-processing software, we evaluated electrical alternans at rest and with the heart rate elevated during a bicycle exercise protocol. In this study we defined optimal criteria for electrical alternans to separate patients from those without inducible arrhythmias. Alternans and signal-averaged electrocardiographic results were compared with the results of vulnerability to ventricular arrhythmias as defined by induction of sustained ventricular tachycardia or fibrillation at electrophysiologic evaluation. In 27 patients alternans recorded at rest and with exercise had a sensitivity of 89%, specificity of 75%, and overall clinical accuracy of 80% (p <0.003). In this patient population the signal-averaged electrocardiogram was not a significant predictor of arrhythmia vulnerability. This is the first study to report that repolarization alternans can be detected with heart rate elevated with a bicycle exercise protocol. Alternans measured using this technique is an accurate predictor of arrhythmia inducibility.

Clinical Trial↗

Negotiation Model For Cooperative Operations in Upper Class E Airspace

This work proposes a negotiation model, built upon the sequential bargaining model, for strategic planning among high-altitude operations. The definition of cost/utility, the setup of time-dependent required cost, and the detailed negotiation structure and process are developed. The sensitivities of negotiation strategies or preferences, response time, and limited maneuverability are investigated to understand the behavior of the proposed negotiation model. Results show that the proposed model can serve the cooperative operation concept well: first, this model ensures an agreement can be reached within a predefined time window; second, operators can accurately express their priorities without exposing their private business information; third, the model encourages short response times and helps the negotiation process converge; finally, the limited and unbalanced maneuverability was found less of a concern for a fair negotiation due to the long lead time available for strategic planning.

Negotiation Model, Strategic Planning, Air Traffic↗

Negotiation Model For Cooperative Operations in Upper Class E Airspace

This work proposes a negotiation model, built upon the sequential bargaining model, for strategic planning among high-altitude operations. The definition of cost/utility, the setup of time-dependent required cost, and the detailed negotiation structure and process are developed. The sensitivities of negotiation strategies or preferences, response time, and limited maneuverability are investigated to understand the behavior of the proposed negotiation model. Results show that the proposed model can serve the cooperative operation concept well: first, this model ensures an agreement can be reached within a predefined time window; second, operators can accurately express their priorities without exposing their private business information; third, the model encourages short response times and helps the negotiation process converge; finally, the limited and unbalanced maneuverability was found less of a concern for a fair negotiation due to the long lead time available for strategic planning.

Negotiation Model↗

Stable Hydrazone-Linked Covalent Organic Frameworks Containing O,N,O'-Chelating Sites for Fe(III) Detection in Water

Two stable crystalline hydrazone-linked covalent organic frameworks (COFs) (Bth-Dha and Bth-Dma) containing functional O,N,O'-chelating sites have been designed and successfully synthesized by the Schiff-base condensation reactions between benzene-1,3,5-tricarbohydrazide (Bth) and 2,5-dihydroxyterephthalaldehyde (Dha) or 2,5-dimethoxyterephthal-aldehyde (Dma), respectively. Bth-Dma exhibits strong fluorescence in the solid state and in an aqueous dispersion, while no fluorescence can be observed for Bth-Dha. Interestingly, the as-synthesized Bth-Dma can be used as a turn-off fluorescence sensor for the Fe(III) ion in aqueous solution with outstanding selectivity and sensitivity. Here, the recognition process can be attributed to the coordination interaction between Fe(III) ion and the O,N,O'-chelating sites in the pore wall of Bth-Dma COF, as verified by X-ray photoelectron spectroscopy and 1 H NMR spectroscopy. To the best of our knowledge, this is the first report on the rational design of luminescent COF with predesigned O,N,O'-chelating sites as a fluorescence sensor for highly selective and sensitive metal ion detection. This work may pave the way for designing luminescent COF sensors with functional binding sites for detecting specific metal ions.

36 MATERIALS SCIENCE↗

High Sensitivity of Non–Fullerene Organic Solar Cells Morphology and Performance to a Processing Additive

Although solvent additives are used to optimize device performance in many novel non-fullerene acceptor (NFA) organic solar cells (OSCs), the effect of processing additives on OSC structures and functionalities can be difficult to predict. Here, two polymer-NFA OSCs with highly sensitive device performance and morphology to the most prevalent solvent additive chloronaphthalene (CN) are presented. Devices with 1% CN additive are found to nearly double device efficiencies to 10%. However, additive concentrations even slightly above optimum significantly hinder device performance due to formation of undesirable morphologies. A comprehensive analysis of device nanostructure shows that CN is critical to increasing crystallinity and optimizing phase separation up to the optimal concentration for suppressing charge recombination and maximizing performance. Here, domain purity and crystallinity are highly correlated with photocurrent and fill factors. However, this effect is in competition with uncontrolled crystallization of NFAs that occur at CN concentrations slightly above optimal. This study highlights how slight variations of solvent additives can impart detrimental effects to morphology and device performance of NFA OSCs. Furthermore, successful scale-up processing of NFA-based OSCs will require extreme formulation control, a tuned NFA structure that resists runaway crystallization, or alternative methods such as additive-free fabrication.

14 SOLAR ENERGY↗

Structural basis for drug and substrate specificity exhibited by FIV encoding a chimeric FIV/HIV protease

Crystal structures of the 6s-98S FIV protease chimera with darunavir and lopinavir bound have been determined at 1.7 and 1.8 Å resolution, respectively. A chimeric feline immunodeficiency virus (FIV) protease (PR) has been engineered that supports infectivity but confers sensitivity to the human immunodeficiency virus (HIV) PR inhibitors darunavir (DRV) and lopinavir (LPV). The 6s-98S PR has five replacements mimicking homologous residues in HIV PR and a sixth which mutated from Pro to Ser during selection. Crystal structures of the 6s-98S FIV PR chimera with DRV and LPV bound have been determined at 1.7 and 1.8 Å resolution, respectively. The structures reveal the role of a flexible 90s loop and residue 98 in supporting Gag processing and infectivity and the roles of residue 37 in the active site and residues 55, 57 and 59 in the flap in conferring the ability to specifically recognize HIV PR drugs. Specifically, Ile37Val preserves tertiary structure but prevents steric clashes with DRV and LPV. Asn55Met and Val59Ile induce a distinct kink in the flap and a new hydrogen bond to DRV. Ile98Pro→Ser and Pro100Asn increase 90s loop flexibility, Gln99Val contributes hydrophobic contacts to DRV and LPV, and Pro100Asn forms compensatory hydrogen bonds. The chimeric PR exhibits a comparable number of hydrogen bonds, electrostatic interactions and hydrophobic contacts with DRV and LPV as in the corresponding HIV PR complexes, consistent with IC{sub 50} values in the nanomolar range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of a Cyclone Using Multiphase Flow Computational Fluid Dynamics

The U.S. Department of Energy National Energy Technology Laboratory's (NETL) 50 kW th chemical looping reactor (CLR) has an underperforming cyclone, which was designed using empirical correlations. To improve the performance of this cyclone using computational fluid dynamics (CFD)-based modeling simulations, four critical design parameters including the vortex tube radius and length, barrel radius, and the inlet width and height were optimized. Here, NETL's open source multiphase flow with interphase exchange (MFiX) CFD code has been used to model a series of cyclones by systematically varying the geometric design parameters. To perform the optimization process, the surrogate modeling and sensitivity analysis followed by the optimization capability in nodeworks was used. The basic methodology for the process is to employ a statistical design of experiments (DOE) method to generate sampling simulations that fill the design space. Corresponding CFD models are then created, executed, and postprocessed. A response surface is created to characterize the relationship between input parameters and the quantities of interest (QoI). Finally, the CFD-surrogate is used by an optimization method to find the optimal design condition based on the objective and constraints prescribed. The resulting optimal cyclone has a larger diameter and longer vortex tube, a larger diameter barrel, and a taller and narrower solids inlet. The improved design has a predicted pressure drop 11 times lower than the original design while reducing the mass loss by a factor of 2.3.

42 ENGINEERING↗