Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random effect model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

β-decay of magic nuclei: Beyond mean-field description

Nuclear β-decay plays an important role not only in nuclear physics but also in astrophysics. The widely used self-consistent Random Phase Approximation (RPA) models tend to overestimate the half-lives of magic nuclei. To overcome this problem, we go beyond the mean-field description and include the effects of particle-vibration coupling (PVC) on top of the RPA model. The β-decay half-lives of {sup 34}Si, {sup 68}Ni, {sup 78}Ni, and {sup 132}Sn are studied within this approach in the case of the Skyrme interaction SkM*. It is found that the low-lying Gamow-Teller (GT) strength is shifted downwards with the inclusion of the PVC effect, and as a consequence, the half-lives are reduced due to the increase of the phase space available for β-decay, which leads to a good agreement between theoretical and experimental lifetimes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scaling Input Distributions for Probabilistic Models - 19472

It is important to address scaling issues when building models to support risk-based decisions for radioactive waste disposal sites. Currently, probabilistic risk assessment and probabilistic performance assessment models are run for multiple realizations where each realization uses one value from each input distribution over the entire modeled time. The input distributions represent the current state of knowledge in the mean of the input variable over the spatial region of interest and over the time period of the model run. This paper focuses on the time factor in input distribution scaling because it presents more serious conceptual and distributional challenges than the spatial factor. One of the challenges in temporal scaling is the effect of non-linearity on propagation of distribution uncertainty through to uncertainty in results. Radioactive waste disposal models tend to have both linear and non-linear components in their models. Dose assessment calculations are typically represented by linear models, while contaminant transport models have linear and non-linear components. In principle, temporal scaling of input parameter distributions for a linear model is straightforward, but scaling of input distributions for non-linear models is not. This paper uses examples to investigate the effects of input distribution temporal scaling on simple linear and non-linear models. Different scaling scenarios were investigated by comparing three analysis tools: analytical mathematical representations, statistical software programming, and GoldSim Monte Carlo simulation software. R statistical software is an open source statistical programming language often used for statistical analyses and graphical representation of data. GoldSim is a robust probabilistic dynamic modeling platform used in performance assessment modeling of radioactive waste sites. A simple linear model, a quadratic model and a multiplicative model were the cases explored for each of these tools. For the three analysis tools considered and with each of the scaling cases, 1,000 realizations were implemented from distributions of the random variables of interest. This is a sufficient number of realizations for simple models to capture the model space. An annual temporal resolution of a 100-year simulation period was chosen for all models and analysis tools. The effects of temporal scaling were demonstrated by investigating two different options for time scaling. Option 1 was set up so that the input distributions represented the expected value on an annual time scale, and a new value from that distribution was chosen every year (at every time step which equaled a year) for 100 years. In Option 2, the input distributions were scaled to represent the expected mean value of the input variable over the 100 years of simulation, and one value from that distribution was chosen for the entire elapsed time. Results show agreement across the three analysis tools. As expected, the linear models have identical results for the two different scaling Options, and the non-linear models diverge in the results for different time scale implementation. The implications of this work point to the need for careful consideration of input distribution temporal scaling. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A topological analysis of large-scale structure, studied using the CMASS sample of SDSS-III

We study the three-dimensional genus topology of large-scale structure using the northern region of the CMASS Data Release 10 (DR10) sample of the SDSS-III Baryon Oscillation Spectroscopic Survey. We select galaxies with redshift 0.452 < z < 0.625 and with a stellar mass M {sub stellar} > 10{sup 11.56} M {sub ☉}. We study the topology at two smoothing lengths: R {sub G} = 21 h {sup –1} Mpc and R {sub G} = 34 h {sup –1} Mpc. The genus topology studied at the R {sub G} = 21 h {sup –1} Mpc scale results in the highest genus amplitude observed to date. The CMASS sample yields a genus curve that is characteristic of one produced by Gaussian random phase initial conditions. The data thus support the standard model of inflation where random quantum fluctuations in the early universe produced Gaussian random phase initial conditions. Modest deviations in the observed genus from random phase are as expected from shot noise effects and the nonlinear evolution of structure. We suggest the use of a fitting formula motivated by perturbation theory to characterize the shift and asymmetries in the observed genus curve with a single parameter. We construct 54 mock SDSS CMASS surveys along the past light cone from the Horizon Run 3 (HR3) N-body simulations, where gravitationally bound dark matter subhalos are identified as the sites of galaxy formation. We study the genus topology of the HR3 mock surveys with the same geometry and sampling density as the observational sample and find the observed genus topology to be consistent with ΛCDM as simulated by the HR3 mock samples. We conclude that the topology of the large-scale structure in the SDSS CMASS sample is consistent with cosmological models having primordial Gaussian density fluctuations growing in accordance with general relativity to form galaxies in massive dark matter halos.

79 ASTRONOMY AND ASTROPHYSICS↗

Explaining persistent incomplete mixing in multicomponent reactive transport with Eulerian stochastic model

We present an Eulerian stochastic advection–diffusion–reaction (SADR) model and use it to explain incomplete mixing typically observed in transport experiments with bimolecular reactions. Unlike traditional advection– dispersion–reaction (ADR) models, the SADR model describes mechanical and diffusive mixing as two separate processes. In the SADR model, mechanical mixing is driven by random advective velocity whose variance is given by the coefficient of mechanical dispersion. The diffusive mixing is modeled as a Fickian diffusion process with the effective diffusion coefficient. We demonstrate that the sum of the two coefficients is equal to the dispersion coefficient, but only the effective diffusion coefficient contributes to the mixing-controlled reactions. We use experimental results of Gramling et al. * * to show that for transport and bimolecular reactions in porous media, the SADR model is significantly more accurate than the ADR model, which overestimates the concentration of the reaction product by as much as 60%. We also show that the SADR model predicts an experimentally observed bell- shaped spatial distribution of the reactive product concentration, while the ADR model results in a concentration distribution with an unphysical kink.

Bimolecular reactions, incomplete mixing, Stochast↗

Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy

The advantages offered by additive manufacturing over traditional processes has driven a great deal of industrial and academic interest in recent years. However, the process is relatively new and requires additional investigation to become sufficiently mature for wide scale industrial adoption. Electron beam melting powder bed fusion is one technology that has shown promise for fabricating high temperature resistant materials such as nickel based superalloys. The resulting microstructures typically exhibit a strong fiber texture in the build direction giving rise to anisotropic time-dependent deformation behavior. In order to accelerate the qualification of these materials for industrial adoption accurate numerical models are needed for simulating their behavior. In this work a crystal plasticity model including non-Schmid effects is presented for capturing creep anisotropy observed in additively manufactured IN738LC. The model is calibrated via a probabilistic framework where model parameters are treated as random variables. An iterative sequential design strategy is utilized to efficiently identify the probability density of the unknown model parameters. As a case study the model is utilized to investigate the behavior of randomly oriented equiaxed grain clusters sometimes observed embedded in the additively manufactured columnar structure. A synthetic realization is simulated and uncertainty is propagated through to the full-field response. Results indicate that these features are the source of significant creep relaxation and strain accumulation which partially explains observed grain boundary decohesion at these locations.

36 MATERIALS SCIENCE↗

Predicting battery capacity from impedance at varying temperature and state of charge using machine learning

Prediction of battery health from electrochemical impedance spectroscopy (EIS) data can enable rapid measurement of battery state in real-world applications without using additional sensors or time-consuming performance measurements. However, deconvoluting the effect of capacity, state of charge, and temperature on EIS response is complicated analytically. Here, various machine-learning models, such as linear, Gaussian process, random forest, and artificial neural network regression, are utilized to predict capacity from EIS using hundreds of capacity, direct current (DC) resistance, and EIS measurements recorded under varying conditions of health, temperature, and state of charge (SOC). Several feature extraction and selection methods from traditional electrochemical analysis and statistical modeling are explored using machine-learning pipelines. EIS data from just two frequencies can accurately predict capacity, and interrogation shows that the optimal set of frequencies is not usually intuitive. Best results are achieved with an ensemble model, which predicts battery capacity with a mean absolute error of 1.9% on data from unobserved cells.

25 ENERGY STORAGE↗

Swiss cheese and a cheesy CMB

It has been argued that the Swiss-Cheese cosmology can mimic Dark Energy, when it comes to the observed luminosity distance-redshift relation. Besides the fact that this effect tends to disappear on average over random directions, we show in this work that based on the Rees-Sciama effect on the cosmic microwave background (CMB), the Swiss-Cheese model can be ruled out if all holes have a radius larger than about 35 Mpc. We also show that for smaller holes, the CMB is not observably affected, and that the small holes can still mimic Dark Energy, albeit in special directions, as opposed to previous conclusions in the literature. However, in this limit, the probability of looking in a special direction where the luminosity of supernovae is sufficiently supressed becomes very small, at least in the case of a lattice of spherical holes considered in this paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of tensor correlations on low-lying collective states in finite nuclei

We present a systematic analysis of the effects induced by tensor correlations on low-lying collective states of magic nuclei, by using the fully self-consistent random phase approximation (RPA) model with Skyrme interactions. The role of the tensor correlations is analyzed in detail in the case of quadrupole (2{sup +}) and octupole (3{sup -}) low-lying collective states in {sup 208}Pb. The example of {sup 40}Ca is also discussed, as well as the case of magnetic dipole states (1{sup +}).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Capacity and cutoff rate calculations for a concatenated coding system

A model is developed for a concatenated coding system, and from it the overall channel cutoff rate and capacity is found using random coding arguments. The effects of interleaving between the inner and outer codes and of the availability of side information to the outer decoder are considered. The performance of several specific concatenated coding systems is calculated and used for comparison with the random coding results. From the analysis, a number of general conclusions regarding the design of concatenated coding systems are presented. All the results are derived assuming a block inner code.

Herro, Mark A.↗

TOPEX orbit determination and gravity recovery using Global Positioning System data from repeat orbits

A covariance analysis is presented for satellite tracking and gravity recovery with a differential Global Positioning System-based technique to be demonstrated on TOPEX in the early 1990s. The technique employs data from an ensemble of repeat ground tracks to recover a unique satellite epoch state for each track and a set of invariant positional parameters common to all tracks. The positional parameters represent the effect of mismodeled gravitational field on the satellite orbit. At an altitude of 1336 km, where gravity modeling is the dominant systematic error, averaging of random error over many arcs and adjustment of the gravity model reduce the final satellite position error. The positional parameters can then be used to produce a refined global gravity model. The analysis indicates that errors ranging from 5 to 8 cm in TOPEX altitude and 0.05 to 0.2 mGal for the gravity field can be achieved, depending on the number of repeat arcs used.

Wu, Jiun-Tsong↗

Broadband Transmission Loss Due to Reverberant Excitation

The noise transmission characteristics of candidate curved aircraft sidewall panel constructions is examined analytically using finite element models of the selected panel geometries. The models are validated by experimental modal analyses and transmission loss testing. The structural and acoustic response of the models are then examined when subjected to random or reverberant excitation, the simulation of which is also discussed. For a candidate curved honeycomb panel, the effect of add-on trim panel treatments is examined. Specifically, two different mounting configurations are discussed and their effect on the transmission loss of the panel is presented. This study finds that the add-on acoustical treatments do improve on the primary structures transmission loss characteristics, however, much more research is necessary to draw any valid conclusions about the optimal configuration for the maximum noise transmission loss. This paper describes several directions for the extension of this work.

Barisciano, Lawrence P. Jr.↗

Preserving correlations between trajectories for efficient path sampling

Importance sampling of trajectories has proved a uniquely successful strategy for exploring rare dynamical behaviors of complex systems in an unbiased way. Carrying out this sampling, however, requires an ability to propose changes to dynamical pathways that are substantial, yet sufficiently modest to obtain reasonable acceptance rates. Satisfying this requirement becomes very challenging in the case of long trajectories, due to the characteristic divergences of chaotic dynamics. Here, we examine schemes for addressing this problem, which engineer correlation between a trial trajectory and its reference path, for instance using artificial forces. Our analysis is facilitated by a modern perspective on Markov chain Monte Carlo sampling, inspired by non-equilibrium statistical mechanics, which clarifies the types of sampling strategies that can scale to long trajectories. Viewed in this light, the most promising such strategy guides a trial trajectory by manipulating the sequence of random numbers that advance its stochastic time evolution, as done in a handful of existing methods. In cases where this “noise guidance” synchronizes trajectories effectively, as the Glauber dynamics of a two-dimensional Ising model, we show that efficient path sampling can be achieved for even very long trajectories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Convolutional Dictionary Regularizers for Tomographic Inversion

There has been a growing interest in the use of data-driven regularizers to solve inverse problems associated with computational imaging systems. The convolutional sparse representation model has recently gained attention, driven by the development of fast algorithms for solving the dictionary learning and sparse coding problems for sufficiently large images and data sets. Nevertheless, this model has seen very limited application to tomographic reconstruction problems. In this paper, we present a model-based tomographic reconstruction algorithm using a learnt convolutional dictionary as a regularizer. The key contribution is the use of a data-dependent weighting scheme for the l 1 regularization to construct an effective denoising method that is integrated into the inversion using the Plug-and-Play reconstruction framework. Using simulated data sets we demonstrate that our approach can improve performance over traditional regularizers based on a Markov random field model and a patch-based sparse representation model for sparse and limited-view tomographic data sets.

Singanallur Vaidyanathan, Venkatakrishnan↗

BEYONDPLANCK IV. On end-to-end simulations in CMB analysis — Bayesian versus frequentist statistics

End-to-end simulations play a key role in the analysis of any high-sensitivity cosmic microwave background (CMB) experiment, providing high-fidelity systematic error propagation capabilities that are unmatched by any other means. In this paper, we address an important issue regarding such simulations, namely, how to define the inputs in terms of sky model and instrument parameters. These may either be taken as a constrained realization derived from the data or as a random realization independent from the data. We refer to these as posterior and prior simulations, respectively. We show that the two options lead to significantly different correlation structures, as prior simulations (contrary to posterior simulations) effectively include cosmic variance, but they exclude realization-specific correlations from non-linear degeneracies. Consequently, they quantify fundamentally different types of uncertainties. We argue that as a result, they also have different and complementary scientific uses, even if this dichotomy is not absolute. In particular, posterior simulations are in general more convenient for parameter estimation studies, while prior simulations are generally more convenient for model testing. Before BEYONDPLANCK, most pipelines used a mix of constrained and random inputs and applied the same hybrid simulations for all applications, even though the statistical justification for this is not always evident. BEYONDPLANCK represents the first end-to-end CMB simulation framework that is able to generate both types of simulations and these new capabilities have brought this topic to the forefront. The BEYONDPLANCK posterior simulations and their uses are described extensively in a suite of companion papers. In this work, we consider one important applications of the corresponding prior simulations, namely, code validation. Specifically, we generated a set of one-year LFI 30 GHz prior simulations with known inputs and we used these to validate the core low-level BEYONDPLANCK algorithms dealing with gain estimation, correlated noise estimation, and mapmaking.

79 ASTRONOMY AND ASTROPHYSICS↗

Theory of a Planckian Metal

We present a lattice model of fermions with N flavors and random interactions that describes a Planckian metal at low temperatures T → 0 in the solvable limit of large N. We begin with quasiparticles around a Fermi surface with effective mass m* and then include random interactions that lead to fermion spectral functions with frequency scaling with k B T/ℏ. Here, the resistivity ρ obeys the Drude formula ρ = m*/(ne 2 τ tr ), where n is the density of fermions, and the transport scattering rate is 1/τ tr = fk B T/ℏ; we find f of order unity and essentially independent of the strength and form of the interactions. The random interactions are a generalization of the Sachdev-Ye-Kitaev models; it is assumed that processes nonresonant in the bare quasiparticle energies only renormalize m*, while resonant processes are shown to produce the Planckian behavior.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Metric Ranking of Invariant Networks with Belief Propagation

The management of large-scale distributed information systems relies on the effective use and modeling of monitoring data collected at various points in the distributed information systems. A promising approach is to discover invariant relationships among the monitoring data and generate invariant networks, where a node is a monitoring data source (metric) and a link indicates an invariant relationship between two monitoring data. Such an invariant network representation can help system experts to localize and diagnose the system faults by examining those broken invariant relationships and their related metrics, because system faults usually propagate among the monitoring data and eventually lead to some broken invariant relationships. However, at one time, there are usually a lot of broken links (invariant relationships) within an invariant network. Without proper guidance, it is difficult for system experts to manually inspect this large number of broken links. Thus, a critical challenge is how to effectively and efficiently rank metrics (nodes) of invariant networks according to the anomaly levels of metrics. The ranked list of metrics will provide system experts with useful guidance for them to localize and diagnose the system faults. To this end, we propose to model the nodes and the broken links as a Markov Random Field (MRF), and develop an iteration algorithm to infer the anomaly of each node based on belief propagation (BP). Finally, we validate the proposed algorithm on both realworld and synthetic data sets to illustrate its effectiveness.

Tao, Changxia↗

Effective and asymptotic criticality of structurally disordered magnets

Changes in magnetic critical behaviour of quenched structurally-disordered magnets are usually exemplified in experiments and in MC simulations by diluted systems consisting of magnetic and non-magnetic components. In our study we aim to show that similar effects can be observed not only for diluted magnets with non-magnetic impurities but may be implemented, e.g., by the presence of two (and more) chemically different magnetic components as well. Therefore we consider a model of the structurally-disordered quenched magnet where all lattice sites are occupied by Ising-like spins of different lengths L. In such a random spin length Ising model, the length L of each spin is a random variable governed by the distribution function p (L). We demonstrate that this model belongs to the universality class of the site-diluted Ising model. This proves that both models are described by the same values of asymptotic critical exponents. However, their effective critical behaviour differs. As a case study, we consider a quenched mixture of two different magnets with values of elementary magnetic moments L 1 = 1 and L 2 = s, and of concentration c and 1 - c, correspondingly. We apply field-theoretical renormalization group approach to analyse the renormalization group flow for different initial conditions, triggered by s and c, and to calculate effective critical exponents further away from the fixed points of the renormalization group transformation. We show how the effective exponents are governed by difference in properties of the magnetic components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The design of a turboshaft speed governor using modern control techniques

The objectives of this program were: to verify the model of off schedule compressor variable geometry in the T700 turboshaft engine nonlinear model; to evaluate the use of the pseudo-random binary noise (PRBN) technique for obtaining engine frequency response data; and to design a high performance power turbine speed governor using modern control methods. Reduction of T700 engine test data generated at NASA-Lewis indicated that the off schedule variable geometry effects were accurate as modeled. Analysis also showed that the PRBN technique combined with the maximum likelihood model identification method produced a Bode frequency response that was as accurate as the response obtained from standard sinewave testing methods. The frequency response verified the accuracy of linear models consisting of engine partial derivatives and used for design. A power turbine governor was designed using the Linear Quadratic Regulator (LQR) method of full state feedback control. A Kalman filter observer was used to estimate helicopter main rotor blade velocity. Compared to the baseline T700 power turbine speed governor, the LQR governor reduced droop up to 25 percent for a 490 shaft horsepower transient in 0.1 sec simulating a wind gust, and up to 85 percent for a 700 shaft horsepower transient in 0.5 sec simulating a large collective pitch angle transient.

Delosreyes, G.↗