Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative Motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

A finite element solver for 3-D compressible viscous flows

Computation of the flow field inside a space shuttle main engine (SSME) requires the application of state of the art computational fluid dynamic (CFD) technology. Several computer codes are under development to solve 3-D flow through the hot gas manifold. Some algorithms were designed to solve the unsteady compressible Navier-Stokes equations, either by implicit or explicit factorization methods, using several hundred or thousands of time steps to reach a steady state solution. A new iterative algorithm is being developed for the solution of the implicit finite element equations without assembling global matrices. It is an efficient iteration scheme based on a modified nonlinear Gauss-Seidel iteration with symmetric sweeps. The algorithm is analyzed for a model equation and is shown to be unconditionally stable. Results from a series of test problems are presented. The finite element code was tested for couette flow, which is flow under a pressure gradient between two parallel plates in relative motion. Another problem that was solved is viscous laminar flow over a flat plate. The general 3-D finite element code was used to compute the flow in an axisymmetric turnaround duct at low Mach numbers.

Reddy, K. C.↗

Active faulting and block rotations in the western Transverse Ranges, California

This paper uses the results of five years of VLBI measurements in conjunction with data on slip vectors of major earthquakes and the dominant westerly trend of faults and blocks to argue that these data are consistent with the concept that rotations about vertical axes in the western Transverse Ranges in California continue at rates of several degrees per million years. It is suggested that rotations about vertical axes may occur in the western Transverse Ranges without these rotations necessarily being manifestations of continuous deformation at depth and that attempts to account for the relative motion of the Pacific and the North America plates by adding rates of slip on major faults are likely to fail.

Jackson, James↗

Minimum-fuel rescue trajectories for the Extravehicular Excursion Unit

The problem of determining minimum-fuel trajectories for rescuing astronauts or equipment which become separated from a Space Station is addressed. Using the Clohessy-Wiltshire equations of relative motion and assuming impulsive Delta-Vs, the minimum-fuel rescue problem is shown to be a parameter optimization problem. Minimum-fuel rescue trajectories are found for seventeen test cases using a recursive quadratic programming algorithm. The results are analyzed and general rules for astronaut rescue and equipment retrieval are developed.

Fowler, W. T.↗

Temporally and spatially resolved flow in a two-stage axial compressor. II - Computational assessment

Fluid dynamics of turbomachines are complicated due to aerodynamic interactions between rotors and stators. It is necessary to understand the aerodynamics associated with these interactions in order to design turbomachines that are both light and compact as well as reliable and efficient. The current study uses an unsteady, thin-layer Navier-Stokes zonal approach to investigate the unsteady aerodyamics of a multistage compressor. Relative motion between rotors and stators is made possible by use of systems of patched and overlaid grids. Results have been computed for a 2 1/2-stage compressor configuration. The numerical data compares well with experimental data for surface pressures and wake data. In addition, the effect of grid refinement on the solution is studied.

Gundy-Burlet, K. L.↗

Positive Stop For Circulation-Control Slot

Rounded shoulder on bushing ensures repeatable stop position. Improved stop mechanism allows airflow slot on circulation-control airfoil to be limited to precise width. Shoulder bushing installed in duct so shoulder rests on inside surface of duct. Bolt slides in bushing in duct wall between more open and less open positions. No relative motion or wear between bolt and slot panel. Prevents bushing from being dislodged by stop forces and provides stiffer stopping surface than sleeve bushing bonded in duct wall.

Hunter, David↗

Users manual for the IMA program

The Impulsive Mission Analysis (IMA) computer program provides a user-friendly means of designing a complete Earth-orbital mission profile using an 80386-based microcomputer. The IMA program produces a trajectory summary, an output file for use by the new Simplex Computation of Optimum Orbital Trajectories (SCOOT) program, and several graphics, including ground tracks on a world map, altitude profiles, relative motion plots, and sunlight/communication timelines. The user can design missions using any combination of three basic types of mission segments: double co-eliptic rendezvous, payload delivery, and payload de-orbit/spacecraft recovery. Each mission segment is divided into one or more transfers, and each transfer is divided into one or more legs, each leg consisting of a coast arc followed by a burn arc.

Williams, D. F.↗

The interstellar gas experiment

The Interstellar Gas Experiment (IGE) exposed thin metallic foils to collect neutral interstellar gas particles. These particles penetrate the solar system due to their motion relative to the sun. Thus, it is possible to entrap them in the collecting foils along with precipitating magnetospheric and perhaps some ambient atmospheric particles. For the entire duration of the Long Duration Exposure Facility (LDEF) mission, seven of these foils collected particles arriving from seven different directions as seen from the spacecraft. In the mass spectroscopic analysis of the noble gas component of these particles, we have detected the isotopes of He-3, He-4, Ne-20, and Ne-22. In the foil analyses carried out so far, we find a distribution of particle arrival directions which shows that a significant part of the trapped particles are indeed interstellar atoms. The analysis needed to subtract the competing fluxes of magnetospheric and atmospheric particles is still in progress.

Lind, D. L.↗

The interstellar gas experiment: Analysis in progress

The interstellar gas experiment (IGE) exposed thin metallic foils in order to collect neutral interstellar particles which penetrate the solar system due to their motion relative to the sun. These atoms were entrapped in the collecting foils along with precipitating magnetospheric ions and with ambient atmospheric atoms. For the entire duration of the LDEF mission, seven of the foils collected particles arriving from seven different directions as seen from the spacecraft. In the mass spectrometric analysis of the trapped noble gas component, we detected the He-3, He-4, Ne-20, and Ne-22 isotopes. In order to infer the isotopic ratios in the interstellar medium from the measured concentrations found in the foil piece, several lines of investigation had to be initiated. The flux of incident noble gas atoms from the ambient atmosphere was estimated by detailed calculations. The contributions proved to be negligible, supporting the experimental evidence. Foil and machine backgrounds for the four isotopes which were measured had to be assessed individually. While this was easy for He-4, spurious foil background of He-3 had to be monitored carefully by analyzing unflown foil pieces. Trapped Ne concentrations are not far above the background. During the flight, a stuck electrical relay precluded the foil-trays from sequencing as designed. Therefore, we could not use the seasonal variation of the direction of the incoming interstellar atoms to make the distinction between interstellar and magnetospheric components of the trapped particles. Instead, we had to try the method of stepwise heating to extract the interstellar component at lower temperatures than we use to extract the magnetospheric component (the interstellars hit the foil with lower energies than most of the magnetospherics). New limiting values for the isotopic composition of the interstellar medium, unavailable yet from any other method of measurement, are emerging from this analysis.

Buehler, F.↗

Space Station long term lubrication analysis. Phase 1 preliminary tribological survey

Increases in the size, complexity, and life requirements of satellites and space vehicles have put increasing demands on the lubrication requirements for trouble-free service. Since the development costs of large systems are high, long lives with minimum maintenance are dictated. The Space Station represents the latest level of size and complexity in satellite development; it will be nearly 100 meters in major dimensions and will have a life requirement of thirty years. It will have numerous mechanisms critical to its success, some of which will be exposed to the space environment. Designing long-life lubrication systems and choosing appropriate lubricants for these systems will be necessary for their meeting the requirements and for avoiding failures with associated dependent mechanisms. The purpose of this program was to identify the various critical mechanisms and review their designs during the overall design and development stage so that problem areas could be avoided or minimized prior to the fabrication of hardware. The specific objectives were fourfold: (1) to perform a tribology survey of the Space Station for the purpose of documenting each wear point as to materials involved, environmental conditions, and operating characteristics; (2) to review each wear point (point of relative motion) as to the lubrication used and substrate materials selected in the context of its operating characteristics and the environmental conditions imposed; (3) to make recommendations for improvement in areas where the lubricant chosen and/or where the substrate (materials of the wear couple) are not considered optimum for the application; and (4) to make or recommend simulated or full scale tests in tribological areas where the state-of-the-art is being advanced, in areas where new designs are obviously being employed and a critical review would indicate that problems are a strong possibility, and/or where excessive wear, a malfunction, or excessive leakage would create fluid systems problems or contamination of exposed optical equipment.

Dufrane, K. F.↗

Dynamics modeling of multibody flexible systems with traveling multi-point joints

This paper presents a general methodology for modeling the dynamics of a flexible structure which moves on the surface of another flexible structure. The relative motion of the two bodies need not follow a straight line, nor need the contact surfaces be planar in their undeformed state. A model reduction approach is also developed, which makes the methodology applicable to large structural systems. The Space Station Freedom Mobile Transporter represents one such system, when attached to the Shuttle Orbiter. Numerical examples are provided.

Messac, Achille↗

Tensile properties of impact ices

A special test apparatus was developed to measure the tensile strength of impact ices perpendicular to the direction of growth. The apparatus consists of a split tube carefully machined to minimize the effect of the joint on impact ice strength. The tube is supported in the wind tunnel by two carefully aligned bearings. During accretion the tube is turned slowly in the icing cloud to form a uniform coating of ice on the split tube specimen. The two halves of the split tube are secured firmly by a longitudinal bolt to prevent relative motion between the two halves during ice accretion and handling. Tensile test strength results for a variety of icing conditions were obtained. Both glaze and rime ice conditions were investigated. In general, the tensile strength of impact ice was significantly less than refrigerator ice. Based on the limited data taken, the median strength of rime ice was less than glaze ice. However, the mean values were similar.

Chu, M. L.↗

Maximum likelihood estimates of polar motion parameters

Two estimators developed by Jeffreys (1940, 1968) are described and used in conjunction with polar-motion data to determine the frequency (Fc) and quality factor (Qc) of the Chandler wobble. Data are taken from a monthly polar-motion series, satellite laser-ranging results, and optical astrometry and intercompared for use via interpolation techniques. Maximum likelihood arguments were employed to develop the estimators, and the assumption that polar motion relates to a Gaussian random process is assessed in terms of the accuracies of the estimators. The present results agree with those from Jeffreys' earlier study but are inconsistent with the later estimator; a Monte Carlo evaluation of the estimators confirms that the 1968 method is more accurate. The later estimator method shows good performance because the Fourier coefficients derived from the data have signal/noise levels that are superior to those for an individual datum. The method is shown to be valuable for general spectral-analysis problems in which isolated peaks must be analyzed from noisy data.

Wilson, Clark R.↗

Linear stability of compressible Taylor-Couette flow

A temporal stability analysis of compressible Taylor-Couette flow is presented. The viscous flow studied in this paper is contained between two concentric cylinders of infinite length, which are rotating with different angular velocities and are kept at different surface temperatures. The effects of differential rotation and temperature difference on the stability of Taylor-Couette flow are contrasted for a range of Mach numbers ranging from incompressible to Mach 3.0. The relative motion of the cylinders dramatically affects the characteristics of the Couette flow at the onset of instability. The flow is stabilized or destabilized depending upon the temperature ratio and speeds of the two cylinders. Independent of Mach number and temperature ratio, increasing Reynolds number generally promotes a destabilizing effect, indicating the inviscid nature of the Taylor-Couette flow.

Kao, Kai-Hsiung↗

Experimental testbed for cooperative robotic manipulators

The robotic testbed facility within Rensselaer's Center for Intelligent Robotic Systems for Space Exploration consists of two PUMA robot manipulators, each mounted on a moving platform. Each platform has a tilt and rotate capability and can move along a two rail linear track. One purpose of this system is to demonstrate the coordination of two arms in relative motion to each other. The system is also useful for investigating the integration problems that occur in an environment that is heavily dependent upon the acquisition, transmission, and processing of data in the form of information, knowledge, and control commands.

Desrochers, A.↗

Robust rendezvous maneuver point conditions

This study develops rendezvous maneuver point conditions that are robust to one dimensional errors in state estimation and burn execution. Allowing small deviations in the time of intercept provides a degree of freedom that can be used to compensate for these errors. The direction of allowable burn deviation is developed for errors in state estimation and burn execution. The maneuver points for which the error is aligned with the insensitive direction provide excellent rendezvous initiation points. The method is applied to sample rendezvous for vehicles in circular and elliptic orbits. Robust maneuver points are selected and the vehicles' relative motion plotted, demonstrating the validity of the maneuver points. Finally, a graphical illustration of the error focusing effect is demonstrated by means of a Monte Carlo simulation.

Fogle, Debra Ann↗

Modeling of coalescence, agglomeration, and phase segregation in microgravity processing of bimetallic composite materials

The overall objective of this research is to develop models to predict drop-size-distribution evolutions due to droplet collisions and coalescence during processing within the miscibility gap of bimetallic liquid-phase-miscibility-gap materials. The individual and collective action of gravitational and nongravitational mechanisms on the relative motion and coalescence of drops are considered.

Davis, Robert H.↗

Results of a zonally truncated three-dimensional model of the Venus middle atmosphere

Although the equatorial rotational speed of the solid surface of Venus is only 4 m s(exp-1), the atmospheric rotational speed reaches a maximum of approximately 100 m s(exp-1) near the equatorial cloud top level (65 to 70 km). This phenomenon, known as superrotation, is the central dynamical problem of the Venus atmosphere. We report here the results of numerical simulations aimed at clarifying the mechanism for maintaining the equatorial cloud top rotation. Maintenance of an equatorial rotational speed maximum above the surface requires waves or eddies that systematically transport angular momentum against its zonal mean gradient. The zonally symmetric Hadley circulation is driven thermally and acts to reduce the rotational speed at the equatorial cloud top level; thus wave or eddy transport must counter this tendency as well as friction. Planetary waves arising from horizontal shear instability of the zonal flow (barotropic instability) could maintain the equatorial rotation by transporting angular momentum horizontally from midlatitudes toward the equator. Alternatively, vertically propagating waves could provide the required momentum source. The relative motion between the rotating atmosphere and the pattern of solar heating, which as a maximum where solar radiation is absorbed near the cloud tops, drives diurnal and semidiurnal thermal tides that propagate vertically away from the cloud top level. The effect of this wave propagation is to transport momentum toward the cloud top level at low latitudes and accelerate the mean zonal flow there. We employ a semispectral primitive equation model with a zonal mean flow and zonal wavenumbers 1 and 2. These waves correspond to the diurnal and semidiurnal tides, but they can also be excited by barotropic or baroclinic instability. Waves of higher wavenumbers and interactions between the waves are neglected. Symmetry about the equator is assumed, so the model applies to one hemisphere and covers the altitude range 30 to 110 km. Horizontal resolution is 1.5 deg latitude, and vertical resolution is 1.5 km. Solar and thermal infrared heating, based on Venus observations and calculations drive the model flow. Dissipation is accomplished mainly by Rayleigh friction, chosen to produce strong dissipation above 85 km in order to absorb upward propagating waves and limit extreme flow velocities there, yet to give very weak Rayleigh friction below 70 km; results in the cloud layer do not appear to be sensitive to the Rayleigh friction. The model also has weak vertical diffusion, and very weak horizontal diffusion, which has a smoothing effect on the flow only at the two grid points nearest the pole.

Newman, M.↗

Development of generalized 3-D braiding machines for composite preforms

The development of prototype braiding machines for the production of generalized braid patterns is described. Mechanical operating principles and control strategies are presented for two prototype machines which have been fabricated and evaluated. Both machines represent advances over current fabrication techniques for composite materials by enabling nearly ideal control of fiber orientations within preform structures. They permit optimum design of parts that might be subjected to complex loads or that have complex forms. Further, they overcome both the lack of general control of produced fiber architectures and the complexity of other weaving processes that have been proposed for the same purpose. One prototype, the Farley braider, consists of an array of turntables that can be made to oscillate in 90 degree steps. Yarn ends are transported about the surface formed by the turntables by motorized tractors which are controlled through an optical link with the turntables and powered through electrical contact with the turntables. The necessary relative motions are produced by a series of linear tractor moves combined with a series of turntable rotations. As the tractors move about, they weave the yarn ends into the desired pattern. The second device, the shuttle plate braider, consists of a braiding surface formed by an array of stationary square sections, each separated from its neighbors by a gap. A plate beneath this surface is caused to reciprocate in two perpendicular directions, first in one direction and then in the other. This movement is made possibly by openings in the plate that clear short columns supporting the surface segments. Yarn ends are moved about the surface and interwoven by shuttles which engage the reciprocating plate as needed to yield the desired movements. Power and control signals are transmitted to the shuttles through electrical contact with the braiding surface. The shuttle plate is a passively driven prime mover that supplies the power to move all shuttles and the shuttles are simple devices that employ only a solenoid to engage the shuttle plate on command. Each shuttle is assigned a unique identity and is controlled independently. When compared to each other, the Farley braider is felt to have the advantage of speed and the shuttle plate braider, the advantage of simplicity.

Huey, Cecil O., Jr.↗