SEARCH · Search NASA

Results for “Reversible computation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Experimental and analytical studies of flow through a ventral and axial exhaust nozzle system for STOVL aircraft

Flow through a combined ventral and axial exhaust nozzle system was studied experimentally and analytically. The work is part of an ongoing propulsion technology effort at NASA Lewis Research Center for short takeoff, vertical landing (STOVL) aircraft. The experimental investigation was done on the NASA Lewis Powered Lift Facility. The experiment consisted of performance testing over a range of tailpipe pressure ratios from 1 to 3.2 and flow visualization. The analytical investigation consisted of modeling the same configuration and solving for the flow using the PARC3D computational fluid dynamics program. The comparison of experimental and analytical results was very good. The ventral nozzle performance coefficients obtained from both the experimental and analytical studies agreed within 1.2 percent. The net horizontal thrust of the nozzle system contained a significant reverse thrust component created by the flow overturning in the ventral duct. This component resulted in a low net horizontal thrust coefficient. The experimental and analytical studies showed very good agreement in the internal flow patterns.

Esker, Barbara S.↗

NASA NTRS1991

Experimental and analytical studies of flow through a ventral and axial exhaust nozzle system for STOVL aircraft

Esker, Barbara S.↗

NASA NTRS1993

Development and application of a reverse Monte Carlo radiative transfer code for rocket plume base heating

A reverse Monte Carlo radiative transfer code to predict rocket plume base heating is presented. In this technique rays representing the radiation propagation are traced backwards in time from the receiving surface to the point of emission in the plume. This increases the computational efficiency relative to the forward Monte Carlo technique when calculating the radiation reaching a specific point, as only the rays that strike the receiving point are considered.

Everson, John↗

NASA NTRS2007

Boundary Layer Receptivity to Weak Freestream Turbulence

The experimental configuration is shown. The tunnel is about 8 ft. long by 2 ft. square. In most cases the wind speed is set to 11.6 m/s. Three different plates are used. Each is a quarter-inch thick, extends wall-to-wall, and has a semi-elliptical leading edge. The two extremes in bluntness are shown, being half a 14:1 ellipse and half a 5:1 ellipse. The plate surface pressure is uniform to better than 0.01 q, except near the leading edge, or whenever a condition of lift is intentionally applied to the plate. Turbulence is created in the setting chamber by means of eight 1/16-inch hypodermic tubes stretched normal to the flow and pressurized at any controlled value up to 6 psi. Each has twenty-one 0.006-inch holes spaced at 1-inch intervals along its mid-section of length, and directed upwind. The tubes are spaced vertically at 1.25-inch intervals. The turbulence so created is carried to the test section, where it is found to be spatially uniform over a suitably large cross-sectional area and axial length. Fig. 2 presents spectra of the steam turbulence in the empty tunnel for jet-array pressures of 1 psi to 6 psi. The T-S range extends between 80 and 150 Hz, approximately, for the present conditions. The primary method of fluctuation measurement is by use of microphones installed on the reverse side of the plate. A description of the method and its advantages has been given in AIAA 90-1504. Mean and fluctuating flow measurements are also made by means of various hot-wire probes and rakes carried on a computer-controlled x-y-z traverse mechanism. Fig. 3 shows the layout of a four-foot plate carrying 64 microphoned, the outputs of which are digitized simultaneously. The location of a single driver used for creating controlled T-S packets is also indicated.

Kendall, J. M.↗

DOE OSTI2025

Genomic factors limiting the diversity of Saccharomycotina plant pathogens

The Saccharomycotina fungi have evolved to inhabit a vast diversity of habitats over their 400-million-year evolution. There are, however, only a few known fungal pathogens of plants in this subphylum, primarily belonging to the genera Eremothecium and Geotrichum. We compared the genomes of 12 plant-pathogenic Saccharomycotina strains to 360 plant-associated strains to identify features unique to the phytopathogens. Characterization of the oxylipin synthesis genes, a compound believed to be involved in Eremothecium pathogenicity, did not reveal any differences in gene presence within or between the plant-pathogenic and plant-associated strains. A reverse-ecological approach, however, revealed that plant pathogens lack several metabolic enzymes known to assist other phytopathogens in overcoming plant defenses. This includes L-rhamnose metabolism, formamidase and nitrilase genes. This result suggests that the Saccharomycotina plant pathogens are limited to infecting ripening fruits as they are without the necessary enzymes to degrade common phytohormones and secondary metabolites produced by plants.

Saccharomycotina, fungi, phytopathogen, reverse ec↗

NASA NTRS1985

Computational aspects of unsteady flows

The calculation of unsteady flows and the development of numerical methods for solving unsteady boundary layer equations and their application to the flows around important configurations such as oscillating airfoils are presented. A brief review of recent work is provided with emphasis on the need for numerical methods which can overcome possible problems associated with flow reversal and separation. The zig-zag and characteristic box schemes are described in this context, and when embodied in a method which permits interaction between solutions of inviscid and viscous equations, the characteristic box scheme is shown to avoid the singularity associated with boundary layer equations and prescribed pressure gradient. Calculations were performed for a cylinder started impulsively from rest and oscillating airfoils. The results are presented and discussed. It is conlcuded that turbulence models based on an algebraic specification of eddy viscosity can be adequate, that location of translation is important to the calculation of the location of flow separation and, therefore, to the overall lift of an oscillating airfoil.

Cebeci, T.↗

DOE OSTI2019

A Closer Look at Fe(II) Passivation of Goethite

Our understanding of how Fe(II) reacts with Fe(III) oxides has evolved significantly based on evidence for electron transfer at the oxide-water interface and Fe(II)-catalyzed recrystallization. Recent experiments, as well as computational calculations, further suggest that defects at oxide surfaces can facilitate electron transfer. There is, however, some evidence that these processes cease after continued contact with Fe(II). Here, we explore the sustainability of these processes over longer time frames by measuring whether exposure to Fe(II) inhibits Fe(II)-goethite electron transfer, and whether this inhibition is reversible. To quantify the extent of electron transfer, we used selective isotope labeling with 57Fe Mössbauer spectroscopy. The results revealed that pre-reacting goethite with Fe(II) decreases the extent of electron transfer during subsequent exposures, and that less electron transfer occurs with increasing reaction time. Similarly, X-ray absorption spectroscopy and magnetic circular dichroism suggest that reaction with Fe(II) consumes surface defects and forms a passivation layer, making goethite less susceptible to electron transfer. When Fe(II) is removed by either wet chemical extraction or oxidation, electron transfer is mostly restored, suggesting that inhibition of electron transfer is reversible. Our results show that in environmental systems, which are commonly subjected to transient geochemical fluctuations, electron transfer between Fe(II) and Fe oxides, and processes linked to it, are likely to be relevant beyond just short time scales.

Andrade de Notini, Luiza↗

DOE OSTI2021

Tailoring magnetization reversal of a single-domain bar nanomagnet via its end geometry

Nanoscale single-domain bar magnets are building blocks for a variety of fundamental and applied mesoscopic magnetic systems, such as artificial spin ices, magnetic shape-morphing microbots, and magnetic majority logic gates. The magnetization reversal switching field of the bar nanomagnets is a crucial parameter that determines the physical properties and functionalities of their constituted artificial systems. Previous methods on tuning the magnetization reversal switching field of a bar nanomagnet usually relied on modifying its aspect ratio, such as its length, width, and/or thickness. Here, we show that the switching field of a bar nanomagnet saturates when extending its length beyond a certain value, preventing further tailoring of the magnetization reversal via aspect ratios. We showcase a highly tunable switching field of a bar nanomagnet by tailoring its end geometry without altering its size. This provides an easy method to control the magnetization reversal of a single-domain bar nanomagnet. It would enable new research and/or applications, such as designing artificial spin ices with additional tuning parameters, engineering magnetic microbots with more flexibility, and developing magnetic quantum-dot cellular automata systems for low power computing.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Interdigitated electrode geometry variation and external quantum efficiency of GaN/AlGaN-based metal-semiconductor-metal UV photodetectors

Aluminum gallium-nitride (Al x Ga 1–x N)-based metal–semiconductor–metal (MSM) ultraviolet photodetectors photodetectors (PD’s) have been successfully designed and fabricated using conventional photolithography techniques and tested experimentally to study their spectral sensitivity across different Al content, x, with x varying from 0 to 0.3. (Al)GaN-based UV PD’s have wide and tunable direct band gaps. The ability to easily select the photodetected wavelength by simply varying the aluminum content of GaN thin film (Al x Ga 1–x N) is a significant advantage of these group III–V compounds. Typically, MSM PD’s grown on (Al)GaN thin films result in ultrafast photodetection because of their highly mobile carriers. These devices are limited by the carrier transit time due to the negligible capacitance presented by the interdigitated fingers. Various electrode geometries were fabricated to investigate the influence of metal contact shapes on the devices’ performance indices with emphasis on the response speed and bias-voltage–independent efficiency. Here, coupled with the independently measured Hall mobility and electric field, we computed the carrier transit time of the devices to be as short as 1.31 ps and the bias-voltage–independent external quantum efficiencies were as high as 70% at 60 V for n-doped and intrinsic devices when operated in the reverse bias regime. Here, (Al x )Ga 1–x N photodetectors were designed to explore spectral sensitivity by altering x from 0 to 0.3.

42 ENGINEERING↗

DOE OSTI2021

HIBP Applications to Advance Understanding of Plasma Transport Physics (2011-2017) (and subsequently titled) Development of Beam Measurements to Advance Understanding of Transients and Improve Validation (2017-2020) (Final Technical Report)

This is the Final Technical Report for the DoE Measurement Innovation (previously Diagnostic Development) grant DE-SC0006077 titled HIBP Applications to Advance Understanding of Plasma Transport Physics (2011-2017), and subsequently titled Development of Beam Measurements to Advance Understanding of Transients and Improve Validation (2017-2020). The grant was funded by the Office of Fusion Energy Sciences (FES) for the period 1 May 2011–17 July 2020. Work performed through the grant has resulted in diagnostic innovations and new measurement capabilities that will improve understanding of transport, magnetic equilibrium, and electric fields in magnetically confined plasmas. We have developed novel hardware and advanced techniques to expand beam-based diagnostic capabilities, and extend measurements to new operating regimes. Some have been realized using a Heavy Ion Beam Probe (HIBP) having traditional features, while other applications have joined our innovations with subsets of advantageous HIBP features. This work has established smaller, more economical detection systems and, in doing so, may enable substantial extension of scenarios in which beam-based diagnostics are deployed. Key Measurement Innovations include: Computer Models and Simulations of HIBP Applications-Computer modeling and simulating of HIBP applications is central to predicting interaction of beam particles with plasmas, designing diagnostic systems, and anticipating measurement characteristics. We have extended the capability and improved measurement fidelity of the HIBP diagnostic on the Madison Symmetric Torus (MST) reversed field pinch (RFP); simulated feasibility of HIBP operation in the Helically Symmetric eXperiment (HSX) optimized stellarator; and investigated the plausibility of HIBP measurements in the ASDEX Upgrade tokamak. We have also developed a new technique that uses ion optics to model a finite phase-space beam. It yields more realistic (than traditional method) estimates of sample volume characteristics, which influence measurement resolution and sensitivity. Extension of Diagnostic Capabilities and Measurements on the MST RFP-Capabilities have been extended using the first and only HIBP installation on an RFP. Challenges associated with operation of the diagnostic on MST include the three-dimensional nature of particle trajectories, temporal topology and amplitude changes in the plasma equilibrium, and strong particle and radiative emission from the plasma. We have addressed these challenges through development of detailed and higher precision diagnostic simulations, calibrated subtraction of noise to resolve secondary ion signals, and implementation of hardware that enables higher fidelity measurement of plasma fluctuations. Development of New Hardware and Measurement Techniques - We have advanced beam-based measurement capabilities via development of new detectors and techniques to determine the poloidal magnetic flux ψ in the plasma, and enable placement of detectors close to the plasma and thus allow a smaller and less expensive diagnostic. We have demonstrated measurement of ψ, an ability that was made possible by development of highly effective noise reduction techniques. We also modeled the effect of non-ideal and instrumentation effects by developing a virtual (simulated) diagnostic. Application of beam-based diagnostics on various devices and multiple magnetic configurations (e.g. stellarator, tokamak, and reversed field pinch) enables investigation of critical physics issues and measurements resulting in the broad parameter space data needed to test and validate theory & modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1980

A simple numerical orthogonal coordinate generator for fluid dynamic applications

An application of a simple numerical technique which allows for the rapid construction of orthogonal coordinate systems about two dimensional and axisymmetric bodies is presented. The technique is based on a predictor corrector numerical method. It can be used to generate orthogonal meshes which have unequally spaced points in two directions. These orthogonal meshes in their transformed computational plane are, however, equally spaced so that the differencing for the metric coefficients and the fluid dynamic equation terms can be easily determined using equally spaced central finite differences. Solutions to the Navier-Stokes equations for flow over blunt bodies with reverse curvature are presented. The coupling of the time dependent fluid dynamic equations and the coordinate generator worked well with no undesirable effects noted.

Graves, R. A., Jr.↗

NASA NTRS1995

Bibliography of Doctor Chul Park

This document contains a comprehensive bibliography of the published works, and a short biography, of Dr. Chul Park. The contents of this bibliography were compiled primarily from the NASA RECON data base. The RECON citations have been modified to appear in a uniform format with all other listed citations . These other citations were located by computer searches in the INSPEC, NTIS, COMPENDEX, and Chemical Abstracts data bases, as well as through the cooperation of Dr. Chul Park, and his associates in the Reacting Flow Environments Branch at NASA Ames Research Center. All citations are presented in an approximate reverse chronological order from the present date. This work was created to honor the occasion of Dr. Chul Park's retirement on December 14, 1994, after 27 years of distinguished government service at the NASA Ames Research Center.

Gochberg, Lawrence A.↗

DOE OSTI2021

A highly efficient and durable air electrode for intermediate-temperature reversible solid oxide cells

Solid oxide cells (SOCs) are considered the most efficient system for reversible conversion between chemical and electrical energy, thus having potential to be an attractive technology for a sustainable energy future. To achieve high round-trip efficiency, highly efficient and durable air electrode materials are needed to minimize energy loss associated with oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Here we report a bi-functional air electrode material, PrBa 0.9 Co 1.96 Nb 0.04 O 5+δ , demonstrating outstanding electrochemical performance (e.g., achieving peak power densities of over 1.5 and 1 W cm –2 , respectively, for Gd 0.1 Ce 0.9 O 1.95 and BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ based fuel cells at 600 °C) while maintaining excellent stability (e.g., having a degradation rate of 40 mV per 1,000 h for H 2 O electrolysis cells). Finally, the excellent property of the new electrode is attributed to the improved stability from Nb doping and the enhanced electrocatalytic activity from tuning Ba deficiency, as confirmed by experimental results and computational analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Exploring novel HIV ‐1 reverse transcriptase inhibitors with drug‐resistant mutants: A double mutant surprise

Abstract HIV‐1 reverse transcriptase (RT) remains a key target for HIV drug development. As successful management of the disease requires lifelong treatment, the emergence of resistance mutations is inevitable, making development of new RT inhibitors, which remain effective against resistant variants crucial. To this end, previous computationally guided drug design efforts have resulted in catechol diether compounds, which inhibit wildtype RT with picomolar affinities and appear to be promising preclinical candidates. To confirm that these compounds remain potent against Y181C, a widespread mutation conferring resistance to first generation inhibitors, they were screened against the HIV‐1 N119 clinical isolate, reported as a Y181C single mutant. In comparison to a molecular clone with the same mutation, N119 appears less susceptible to inhibition by our preclinical candidate compounds. A more detailed sequencing effort determined that N119 was misidentified and carries V106A in combination with Y181C. While both indolizine and naphthalene substituted catechol diethers are potent against the classical Y181C single mutant, the addition of V106A confers more resistance against the indolizine derivatives than the naphthalene derivatives. Crystal structures presented in this study highlight key features of the naphthyl group, which allow these compounds to remain potent in the double mutant, including stronger interactions with F227 and less reliance on V106 for stabilization of the ethoxy‐uracil ring, which makes critical hydrogen bonds with other residues in the binding pocket.

Biochemistry & Molecular Biology↗

DOE OSTI2025

Tritium adsorption and absorption on (100) and (001) surfaces of pure and tin defective zirconium

Zirconium alloys such as zircaloy-4 are used as tritium (T) getter materials in tritium-producing burnable absorber rods (TPBARs) due to their ability to capture T, thereby forming metal hydrides. Developing an understanding of T adsorption onto zircaloy prior to diffusion into the subsurface is relevant for rational tritium getter and TPBAR design, to improve material properties for nuclear applications. Herein, density functional theory calculations revealed the preferred binding sites for T adsorption on Zr(001) and Zr(100). The energy barriers of T transfer, along the surface and from the surface to the subsurface were computed. The adsorption properties of Zr(001) were found to be superior to those of Zr(100). Surface tin impurities were found to strongly repel T. The presence of subsurface and surface tin resulted in higher absorption energy barriers for both the forward and reverse processes. Based on the calculated energy barriers, a surface to surface T diffusion coefficient of 9.53 × 10 -10 m 2 s -1 is expected for pristine Zr(001). Finally, a surface to subsurface T diffusion coefficient on the order of 10 -13 m 2 s -1 is predicted in pristine Zr, decreasing to 10 -19 m 2 s -1 for the transfer with a subsurface tin impurity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2003

Mechanisms of Rotating Instability in Axial Compressors Investigated

Rotating instability is a phenomenon that occurs in the tip flow region of axial compressor stages during stable operation. It can be observed in highly staggered rotors with significant tip clearance and is strongest at high-load operating points where the characteristic levels off. In this condition, the single-stage fan under investigation radiates an audible, whistling tone, and wall pressure spectra in the vicinity of the rotor disk exhibit nonrotational components. The graph shows the spectrum of static pressure at a point on the endwall near the leading edge. A hump appears at roughly half of the blade passing frequency (BPF) and is characteristic of rotating instability. A computational model was developed at the NASA Glenn Research Center to investigate the mechanism behind this phenomenon. A three-dimensional steady Navier-Stokes code that has been successfully tested for a wide range of turbomachinery flows was modified to execute a time-accurate simulation of the full annulus of the compressor. At the inlet of the computational domain, the total pressure, total temperature, and two velocity components are specified. Since no unsteady measurements of static pressure or other flow variables were available downstream of the rotor, circumferentially averaged static pressure was specified on the shroud at the outlet of the computational domain. A three-dimensional view of the vortex from the numerical model is shown. Particle traces released near the leading edge tip have rolled up to illustrate the tip clearance vortex. Flow near the trailing edge is pushed forward by the axially reversed flow. It then interacts with the tip clearance flow and the incoming flow and results in the rotating instability vortex, the core of which is illustrated by total pressure shading on planes located successively downstream. The rotating instability vortex is formed periodically midway between the blades and moves toward the pressure side of the passage. The unsteady behavior of this vortex structure is the main mechanism of the rotating instability is shown. The numerical model can be used to detect any possible occurrence of rotating instability when the tip clearance increases during engine service.

Hah, Chunill↗

NASA NTRS2007

NASA Tech Briefs, September 2007

Topics covered include; Rapid Fabrication of Carbide Matrix/Carbon Fiber Composites; Coating Thermoelectric Devices To Suppress Sublimation; Ultrahigh-Temperature Ceramics; Improved C/SiC Ceramic Composites Made Using PIP; Coating Carbon Fibers With Platinum; Two-Band, Low-Loss Microwave Window; MCM Polarimetric Radiometers for Planar Arrays; Aperture-Coupled Thin-Membrane L-Band Antenna; WGM-Based Photonic Local Oscillators and Modulators; Focal-Plane Arrays of Quantum-Dot Infrared Photodetectors; Laser Range and Bearing Finder With No Moving Parts; Microrectenna: A Terahertz Antenna and Rectifier on a Chip; Miniature L-Band Radar Transceiver; Robotic Vision-Based Localization in an Urban Environment; Programs for Testing an SSME-Monitoring System; Cathodoluminescent Source of Intense White Light; Displaying and Analyzing Antenna Radiation Patterns; Payload Operations Support Team Tools; Space-Shuttle Emulator Software; Soft Real-Time PID Control on a VME Computer; Analyzing Radio-Frequency Coverage for the ISS; Nanorod-Based Fast-Response Pressure-Sensitive Paints; Capacitors Would Help Protect Against Hypervelocity Impacts; Diaphragm Pump With Resonant Piezoelectric Drive; Improved Quick-Release Pin Mechanism; Designing Rolling-Element Bearings; Reverse-Tangent Injection in a Centrifugal Compressor; Inertial Measurements for Aero-assisted Navigation (IMAN); Analysis of Complex Valve and Feed Systems; Improved Path Planning Onboard the Mars Exploration Rovers; Robust, Flexible Motion Control for the Mars Explorer Rovers; Solar Sail Spaceflight Simulation; Fluorine-Based DRIE of Fused Silica; Mechanical Alloying for Making Thermoelectric Compounds; Process for High-Rate Fabrication of Alumina Nanotemplates; Electroform/Plasma-Spray Laminates for X-Ray Optics; An Automated Flying-Insect Detection System; Calligraphic Poling of Ferroelectric Material; Blackbody Cavity for Calibrations at 200 to 273 K; KML Super Overlay to WMS Translator; High-Performance Tiled WMS and KML Web Server; Modeling of Radiative Transfer in Protostellar Disks; Composite Pulse Tube; Photometric Calibration of Consumer Video Cameras; Criterion for Identifying Vortices in High- Pressure Flows; Amplified Thermionic Cooling Using Arrays of Nanowires; Delamination-Indicating Thermal Barrier Coatings; Preventing Raman Lasing in High-Q WGM Resonators; Procedures for Tuning a Multiresonator Photonic Filter; Robust Mapping of Incoherent Fiber-Optic Bundles; Extended-Range Ultrarefractive 1D Photonic Crystal Prisms; Rapid Analysis of Mass Distribution of Radiation Shielding; Modeling Magnetic Properties in EZTB; Deep Space Network Antenna Logic Controller; Modeling Carbon and Hydrocarbon Molecular Structures in EZTB; BigView Image Viewing on Tiled Displays; and Imaging Sensor Flight and Test Equipment Software.

Source record↗

DOE OSTI2022

Detecting CAN Masquerade Attacks with Signal Clustering Similarity

Vehicular Controller Area Networks (CANs) are susceptible to cyber attacks of different levels of sophistication. Fabrication attacks are the easiest to administer—an adversary simply sends (extra) frames on a CAN—but also the easiest to detect because they disrupt frame frequency. To overcome time-based detection methods, adversaries must administer masquerade attacks by sending frames in lieu of (and therefore at the expected time of) benign frames but with malicious payloads. Research efforts have proven that CAN attacks, and masquerade attacks in particular, can affect vehicle functionality. Examples include causing unintended acceleration, deactivation of vehicle’s brakes, as well as steering the vehicle. We hypothesize that masquerade attacks modify the nuanced correlations of CAN signal time series and how they cluster together. Therefore, changes in cluster assignments should indicate anomalous behavior. We confirm this hypothesis by leveraging our previously developed capability for reverse engineering CAN signals (i.e., CAN-D [Controller Area Network Decoder]) and focus on advancing the state of the art for detecting masquerade attacks by analyzing time series extracted from raw CAN frames. Specifically, we demonstrate that masquerade attacks can be detected by computing time series clustering similarity using hierarchical clustering on the vehicle’s CAN signals (time series) and comparing the clustering similarity across CAN captures with and without attacks. We test our approach in a previously collected CAN dataset with masquerade attacks (i.e., the ROAD dataset) and develop a forensic tool as a proof of concept to demonstrate the potential of the proposed approach for detecting CAN masquerade attacks.

Moriano Salazar, Pablo↗