Search NASA⌕ Search

SEARCH · Search NASA

Results for “SLAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The structure, composition, and performance impact of a YSZ-GDC interdiffusion layer in solid oxide electrolysis cells

This study provides a combined experimental and computational investigation into the structure and impact of the cation interdiffusion layer that appears at the gadolinium doped ceria (GDC)/yttria stabilized zirconia (YSZ) interface in solid oxide electrolysis cells (SOECs). Scanning transmission electron microscopy (STEM) illustrates that a ∼0.4 μm interdiffusion layer (IDL) with an intermixed cation distribution and fine grain size forms upon sintering. STEM identifies that the interdiffusion layer exists in the cubic fluorite structure despite changes in cation composition. The interdiffusion layer microstructure formed during sintering does not change during SOEC testing at either 1.3V or heightened voltage pulse testing. Modeling predicts that ionic conductivity may decrease in the interdiffusion layer due to Coulombic trapping between mobile oxygen vacancies and excess Gd 3+ acceptor dopants. Yet, the density and continuous nature of the layer should benefit cell stability by substantially reducing the formation of SrZrO 3 , which is corroborated by STEM and Synchrotron X-ray diffraction (XRD). We conclude that the interdiffusion layer acts as a beneficial barrier to Sr diffusion, when operating in a regime where electrolyte void formation is not observed.

organic↗
DOE OSTI2026

Robust dynamic operation of high temperature electrolysis solid oxide cells

Here, this study evaluates the durability of Ni/YSZ-supported SOECs under dynamic operating conditions relevant to real-world applications. Systematic tests were conducted to assess cell performance under steam cycling (3 to 75% humidified H 2 ), mode cycling between SOFC and SOEC operation, thermal cycling (150 to 750 °C at OCV, and 600 to 800 °C at 1.3V), and redox cycling (between 50% humidified H 2 and 50% humidified N 2 ). Steam cycling, mode cycling, and thermal cycling at OCV do not significantly accelerate performance degradation. Thermal cycling at 1.3V caused minimal damage within 600 to 800 °C. Full redox cycling (multi-hour oxidation holds) induced cell structural failure, while partial redox cycling (0.5 h holds) was tolerated. Extensive characterization revealed some material evolution, namely Sr and Co secondary phase formation, within the oxygen electrode due to La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ instability, especially for steam cycling and mode cycling. Minimal changes were identified within the Ni-YSZ fuel electrodes. These findings provide critical insights into SOEC reliability under dynamic conditions, supporting their application in dynamic or intermittent energy systems.

08 HYDROGEN↗
DOE OSTI2025

Model-driven prediction for accelerator magnet diagnostics to improve operation reliability

Reliability is one of the most critical metrics for accelerator operation, especially in user facilities. To reduce costly facility downtime and provide an operational environment where system performance can be reliably predicted in support of scientific studies, we are developing a model-driven approach for prediction and anomaly detection. Here, in this study, we present the application of a model-driven method that employs a linear regression model to predict the future temperature, in real time, of accelerator magnets at the NSLS-II light source. This approach enables proactive identification of magnet-heating issues, facilitating magnet flushing prior to the occurrence of permanent damage without interrupting machine operation. The implementation of this method in the NSLS-II control room is described and the analysis of the online results is presented. The results demonstrate the model’s effectiveness in providing early alerts to engineers and improving the reliability of accelerator operations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Zr 3 Mn 3 Sn 4 Ga: A new hetero-kagome bilayer antiferromagnet

Here, we report the magnetic and electrical transport properties of single-crystalline Zr 3 Mn 3 Sn 4 Ga, featuring two distinct kagome lattices: a non-magnetic breathing Zr 3 Sn 4 lattice and a magnetic intact Mn 3 Ga lattice. The material undergoes an antiferromagnetic phase transition at T N = 87 K, with neutron diffraction confirming commensurate ordering characterized by k = (1/3,1/3,0). Transport measurements show metallic behavior, a resistivity anomaly near T N , and 12% magnetoresistance at 2 K under 9 T. Deviations from the conventional second-order power law, along with negative magnetoresistance and nonlinear Hall slope variations near T N , suggest strong magneto-electronic coupling. Resonant photoemission spectroscopy identifies Zr 4d and Mn 3d orbitals as dominant contributors to the valence band, linking the material’s unique electronic properties to its kagome layers. Zr 3 Mn 3 Sn 4 Ga offers a valuable platform to study interactions between magnetism and topological electronic bands in hetero-kagome systems using the co- existence of magnetic and non-magnetic kagome layers and its tunable electronic structure.

Crystal structure↗
DOE OSTI2024

Electrochemically-Formed Disordered Rock Salt ω-Li x V 9 Mo 6 O 40 as a Fast-Charging Li-Ion Electrode Material

Electrochemically-formed disordered rock salt compounds are an emerging class of Li-ion electrode materials for fast-charging energy storage. However, the specific factors that govern the formation process and the resulting charge storage performance are not well understood. Here, we characterize the transformation mechanism and charge storage properties of an electrochemically-formed disordered rock salt from V 9 Mo 6 O 40 (VMO). The crystal structure of VMO has similar motifs to that of α-V 2 O 5 , a well-studied analogue, but VMO has less mechanical flexibility due to additional corner-sharing octahedra in its structure. As a result, VMO undergoes a single-step transformation pathway, which we characterize through operando X-ray diffraction, and forms an unusual highly distorted lamellar microstructure, as we show with high-resolution transmission electron microscopy. The resulting Li x VMO material shows fast charging and other electrochemical characteristics and performance typical of many nanomaterials, even though the material is composed of relatively large particles.

25 ENERGY STORAGE↗
DOE OSTI2026

Ion Transport and Crystal Rotation in Plastic Crystal Electrolytes Under Applied Electric Fields

Organic ionic plastic crystal electrolytes, containing a plastic crystal and lithium salt, offer a potential balance between mechanical and electrochemical properties for solid state lithium-ion battery electrolytes. These electrolytes contain multiple mobile ionic species (three or four), resulting in complex transport mechanisms which have not yet been established. Plastic crystals are defined by long-range positional order and short-range rotational disorder. It is therefore necessary to quantify changes in the local crystal structure of the electrolyte as current flows through it. Herein, we examine the electrochemical properties of pyrrolidinium-based plastic crystal electrolytes containing lithium salt and zwitterion additives, including measurements of current fraction and limiting current. We obtain species-specific insight into electrolyte transport using pulsed-field gradient nuclear magnetic resonance spectroscopy and find that, while the zwitterion additive increases ionic conductivity, it decreases lithium diffusivity with respect to other ionic components. With operando spatiotemporally resolved wide-angle X-ray scattering we observe location-specific crystal rotations due to the passage of ionic current. In conclusion, we posit that reducing energy dissipation due to rotation is essential for using plastic crystal electrolytes in practical applications.

Yap, Kyra M. K. [University of California, Berkele↗
DOE OSTI2025

Chemistry of Materials Underpinning Photoelectrochemical Solar Fuel Production

Since its inception, photoelectrochemistry has sought to power the generation of fuels, particularly hydrogen, using energy from sunlight. Efficient and durable photoelectrodes, however, remain elusive. Here we review the current state of the art, focusing our discussion on advances in photoelectrodes made in the past decade. We open by briefly discussing fundamental photoelectrochemical concepts and implications for photoelectrode function. We next review a broad range of semiconductor photoelectrodes broken down by material class (oxides, nitrides, chalcogenides, and mature photovoltaic semiconductors), identifying intrinsic properties and discussing their influence on performance. We then identify innovative in situ and operando techniques to directly probe the photoelectrode|electrolyte interface, enabling direct assessment of structure–property relationships for catalytic surfaces in active reaction environments. We close by considering more complex photoelectrochemical fuel-forming reactions (carbon dioxide and nitrogen reduction, as well as alternative oxidation reactions), where product selectivity imposes additional criteria on electrochemical driving force and photoelectrode architecture. By contextualizing recent literature within a fundamental framework, we seek to provide direction for continued progress toward achieving efficient and stable fuel-forming photoelectrodes.

08 HYDROGEN↗
DOE OSTI2025

X-ray Spectroscopy Characterization of Electronic Structure and Metal–Metal Bonding in Dicobalt Complexes

Developing multimetallic complexes with tunable metal–metal interactions has long been a target of synthetic inorganic chemistry efforts due to the unique properties that such compounds can exhibit. However, understanding relationships between metal–metal bonding and chemical properties is challenging due to system-dependent factors that influence metal–metal and metal–ligand interactions, including ligand identity, coordination geometry, and metal–metal distance. In this work, we apply X-ray absorption and emission spectroscopy and quantum chemical calculations to describe electronic structure and bonding in a series of dicobalt complexes. The compounds with silane ligands and pseudo-octahedral coordination geometry exhibit Co–Co σ and multicentered bonding character, which we characterize from both the occupied and vacant perspectives via their contributions to the Co X-ray emission and absorption spectra, respectively. In contrast, the dicobalt complexes with a pseudotetrahedral coordination environment do not exhibit Co–Co bonding due to symmetry constraints on orbital overlap. We extend these insights to the theoretical evaluation of related dicobalt complexes to explain how ligand coordination and symmetry dictate the presence or absence of a Co–Co bond. In conclusion, this work highlights how fundamental insights into electronic structure and bonding through X-ray spectroscopy uncover important factors governing metal–metal interactions and guide the rational design of multimetallic complexes with tunable metal–metal bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Spatial Mapping of Valence Excited-State Landscapes Using Time-Resolved Shake-Down Spectroscopy

Time-resolved X-ray photoelectron spectroscopy (XPS) is used to track the photodissociation dynamics of 2-iodothiophene following 262 nm excitation. The transient XPS features include both direct ionization of the initially populated excited states and pronounced satellite peaks arising from shake-down processes. While the direct ionization signals exhibit only minimal energy shifts during C−I bond cleavage, the shake-down transitions undergo a substantial, 5 eV, shift over the reaction coordinate. By correlating these shifts with simulated C−I bond lengths, a direct structural mapping is established that reveals the exceptional sensitivity of shake-down channels to molecular geometry. These results demonstrate that shake-down transitions provide a new and powerful probe of ultrafast structural dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis and Physical Properties of Manganese Chromium Nitride Thin Films Grown via Molecular Beam Epitaxy

Here, we demonstrate the ability to grow epitaxial thin films of manganese–chromium nitride (Mn x Cr 1–x N) across the entire composition range on magnesium oxide (MgO) (1 0 0) surfaces by molecular beam epitaxy. By independently controlling the ratio of the atomic fluxes of manganese and chromium, the compositional dependence of structural and electrical transport properties is determined. Soft X-ray absorption shows that the valence states of Cr( 3+ ) and Mn( 3+ ) remain identical among these MnCrN epitaxial films. The metallic transport behavior of binary manganese nitride (MnN) and chromium nitride (CrN) is suppressed in the ternary alloys. Changes in room temperature electrical resistivity of up to 100 times and 5 orders of magnitude at cryogenic temperatures are observed. This work expands the variety of nitride compounds available for epitaxial integration and could provide additional flexibility for the development of metal–semiconductor–insulator junctions for spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resolution of Selectivity Steps of CO Reduction Reaction on Copper by Quantum Monte Carlo

Electrochemical reduction of carbon monoxide to valuable fuels and chemicals on copper surfaces remains a challenging area in catalysis due to a limited understanding of adsorption mechanisms and reaction pathways. Although density functional theory (DFT)-based studies have investigated these processes, their accuracy varies across different functionals. Here, in this study, we present the application of fixed-node diffusion Monte Carlo (FNDMC) to benchmark the adsorption energies of CO*, H*, and key CO reduction reaction (CORR) intermediates, COH* and CHO* on the Cu(111) surface. Our results for CO* and H* adsorption energies closely align with experimentally measured chemisorption reactions, highlighting the limitations of DFT and providing site-specific energy comparisons that are often not available experimentally. Additionally, we explore the effect of explicit solvation, demonstrating how water stabilizes the COH* over CHO*, thus suggesting a critical role of COH* in CORR. Finally, we release our high-accuracy FNDMC benchmarks for testing and developing new DFT functionals for electrocatalysis. Overall, this study underscores the potential of FNDMC for detailed surface chemistry studies and offers new insights into catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lowering the Scaling of Self-Consistent Field Methods by Combining Tensor Hypercontraction and a Density Difference Ansatz

We present the tensor hypercontraction difference self-consistent field (SCF) method, an approach that reduces the formal computational scaling of traditional naive self-consistent field methods from 𝑂(𝑁 4 ) to 𝑂(𝑁 3 ) with system size 𝑁. The scaling reduction is achieved by developing a new technique for constructing the tensor hypercontraction decomposition based on the fundamental approximation made in density fitting. Combining this scheme with the difference self-consistent field methodology, we achieve a method that enables 𝑂(𝑁 3 ) scaling SCF calculations with only 𝑂(𝑁 2 ) storage requirements. In conclusion, our proof-of-concept numerical tests demonstrate robust performance with errors in total energies below 8 × 10 –4 E h and with sub 1 kcal/mol errors for relative energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Observation of the ππ* to nπ* Transition in 2-Thiouracil via Time-Resolved NEXAFS Spectroscopy

The photophysics of nucleobases has been the subject of both theoretical and experimental studies over the past decades due to the challenges posed by resolving the steps of their radiationless relaxation dynamics, which cannot be described in the framework of the Born–Oppenheimer approximation (BOA). In this context, the ultrafast dynamics of 2-thiouracil has been investigated with a time-resolved NEXAFS study at the Free Electron Laser FLASH. Near Edge X-ray Absorption Fine Structure spectroscopy (NEXAFS) can be used to observe electronic transitions in ultrafast molecular relaxation. We performed time-resolved UV-pump/X-ray probe absorption measurements at the sulfur 2s (L1) and 2p (L2/3) edges. We are able to identify absorption features corresponding to the S2 (ππ*) and S1 (nπ*) electronic states. We observe a delay of 102 ± 11 fs in the population of the nπ* state with respect to the initial optical excitation and interpret the delay as the time scale for the S2 → S1 internal conversion. We furthermore identify oscillations in the absorption signal that match a similar observation in our previous X-ray photoelectron spectroscopy study on the same molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Characterizing Ultrafast Intersystem Crossing Pathways in Molecular Pt Dimers Using Time-Resolved Wide-Angle X-ray Scattering

Vibronic coupling between transition metal charge transfer states is a potential mechanism for enhancing the intersystem crossing (ISC) rate. Vibronic coupling-driven ISC has been observed in Pt­(II) dimer complexes, where the trajectory across excited-state pathways is tuned by atomic displacements via Pt–Pt stretching vibrations. Time-resolved wide-angle X-ray scattering (TR-WAXS) was utilized to quantify the Pt–Pt contraction following metal–metal-to-ligand charge transfer (MMLCT) excitation in Pt dimers with different bridging ligands. Both complexes exhibit Pt–Pt bond formation with a decrease in Pt–Pt distance of ∼ 0.25 Å and coherent vibrational wavepackets (CVWPs) encoded in the Pt–Pt contraction of both dimers. However, the complexes exhibit different time-dependent evolution of their CVWPs. Analysis of interference patterns between different CVWPs is used to track the trajectory across the excited-state surfaces. Furthermore, this work demonstrates that the interference between CVWPs in ultrafast TR-WAXS encodes indirect information regarding electronic excited-states to reveal the Pt dimer bridge-dependent ISC mechanism.

Computational chemistry↗
DOE OSTI2025

Sub-tesla On-Chip Nanomagnetic Metamaterial Platform for Angle-Resolved Photoemission Spectroscopy

Magnetically controlled states in quantum materials are central to their unique electronic and magnetic properties. However, direct momentum-resolved visualization of these states via angle-resolved photoemission spectroscopy (ARPES) has been hindered by the disruptive effect of magnetic fields on photoelectron trajectories. Here, we introduce an in situ method that is, in principle, capable of applying magnetic fields up to 1 T. This method uses substrates composed of nanomagnetic metamaterial arrays with alternating polarity. Such substrates can generate strong, homogeneous, and spatially confined fields applicable to samples with thicknesses up to the micron scale, enabling ARPES measurements under magnetic fields with minimal photoelectron trajectory distortion. Here, we demonstrate this minimal distortion with ARPES data taken on monolayer graphene. Our method paves the way for probing magnetic field-dependent electronic structures and studying field-tunable quantum phases with state-of-the-art energy-momentum resolutions.

Magnetic properties↗
DOE OSTI2025

Dichotomous Temperature Response in the Electronic Structure of Epitaxially Grown Altermagnet MnTe

The altermagnet candidate MnTe has recently gained significant interest due to its unconventional magnetic ordering. One of the key features of altermagnetism is the momentum-dependent spin-split band and its temperaturedependent evolution. Yet a fully momentum-resolved experimental investigation, including out-of-plane direction, is still lacking. Here, we systematically investigate the electronic structure of epitaxially grown MnTe by using angle-resolved photoemission spectroscopy (ARPES). Our photon-energy-dependent ARPES data reveal significant out-of-plane dispersions consistent with previous theoretical calculations. More interestingly, we identify two distinct temperature-dependent electronic band structure evolutions at different out-of-plane momentum positions: momentum-dependent energy shifts at the nodal plane and substantial spectral weight suppression at the off-nodal plane. These findings may suggest the importance of considering both the itinerant and localized nature of the magnetic ordering and momentum-dependent interactions. Our work provides crucial insights into the complex correlation between momentum, temperature, and electronic structure in MnTe, contributing to a deeper understanding of altermagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Magnetically Tunable Polariton Cavities in van der Waals Heterostructures

Nanophotonic cavities are the foundation for a broad spectrum of applications, including quantum sensing, on-chip communication, and cavity quantum electrodynamics. In van der Waals (vdW) materials, these cavities can harness polaritons, which are quasiparticles emerging from photon interactions with excitons, plasmons, or phonons that are confined in microscopic sample flakes. Hybrid phonon–plasmon cavities leverage the long lifetimes of phonons and good tunability of plasmons, but their reconfigurability remains fundamentally limited. Here, in this work, we introduce a magnetic-field-tuning mechanism for polaritonic cavities in a vdW heterostructure. Specifically, we demonstrate that the primary Landau transition in magnetized charge-neutral graphene can be harvested for controlling polaritonic cavity modes in a graphene-based phononic heterostructure. Additionally, we predict a magnetic-field-induced topological transition in the polariton isofrequency contour, causing a nontrivial cavity mode profile redistribution. Our study underscores the versatility of Landau-based nanophotonic cavities, offering new paradigms for the design and manipulation of light–matter interactions at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Trihydrogen Formation on Gold Nanoparticles in Strong Laser Fields

The tri-hydrogen cation (H+ 3 ) plays a central role in proton-transfer chemistry, astrochemical pathways, and hydrogen plasma environments, acting as a key indicator of ultrafast proton rearrangement. Although H+ 3 formation is studied extensively in the gas phase, its surface-mediated generation and its sensitiv- ity to nanoparticle morphology remain largely unexplored. Gold nanoparticles (AuNPs), which can localize surface charge and sustain strong electric fields, offer an ideal platform to probe such nonequilibrium reaction pathways. Us- ing reaction nanoscopy, we spatially map H+ 3 production on AuNPs exposed to intense femtosecond laser fields. By comparing spherical and faceted nanopar- ticles, we demonstrate how morphology modulates charge density and governs reaction efficiency. We find that sharp features on faceted particles concen- trate charge more effectively, promoting molecular fragmentation and enabling proton rearrangement and migration that enhance H+ 3 yields. This work opens new directions for exploiting strong-field interactions at metal interfaces to drive nanoscale reactivity and photocatalysis.

Dagar, Ritika [SLAC National Accelerator Laborator↗