Search NASA⌕ Search

SEARCH · Search NASA

Results for “STATISTICAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Unified description of fission in fusion and spallation reactions

We present a statistical-model description of fission, in the framework of compound-nucleus decay, which is found to simultaneously reproduce data from both heavy-ion-induced fusion reactions and proton-induced spallation reactions at around 1 GeV. For the spallation reactions, the initial compound-nucleus population is predicted by the Liege intranuclear cascade model. We are able to reproduce experimental fission probabilities and fission-fragment mass distributions in both reactions types with the same parameter sets. However, no unique parameter set was obtained for the fission probability. The introduction of fission transients can be offset by an increase of the ratio of level-density parameters for the saddle-point and ground-state configurations. Changes to the finite-range fission barriers could be offset by a scaling of the Bohr-Wheeler decay width as predicted by Kramers. The parameter sets presented allow accurate prediction of fission probabilities for excitation energies up to 300 MeV and spins up to 60 ({h_bar}/2{pi}).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Total reaction cross sections from elastic {alpha}-nucleus scattering angular distributions around the Coulomb barrier

The total reaction cross section {sigma}{sub reac} is a valuable measure for the prediction of {alpha}-induced reaction cross sections within the statistical model and for the comparison of scattering of tightly bound projectiles to weakly bound and exotic projectiles. Here we provide the total reaction cross sections {sigma}{sub reac} derived from our previously published angular distributions of elastic {alpha}-nucleus scattering on {sup 89}Y, {sup 92}Mo, {sup 112,124}Sn, and {sup 144}Sm at energies around the Coulomb barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation and Calibration of Nuclear Thermal Hydraulics Multiscale Multiphysics Models - Subcooled Flow Boiling Study

In addition to validation data plan, development of advanced techniques for calibration and validation of complex multiscale, multiphysics nuclear reactor simulation codes are a main objective of the CASL VUQ plan. Advanced modeling of LWR systems normally involves a range of physico-chemical models describing multiple interacting phenomena, such as thermal hydraulics, reactor physics, coolant chemistry, etc., which occur over a wide range of spatial and temporal scales. To a large extent, the accuracy of (and uncertainty in) overall model predictions is determined by the correctness of various sub-models, which are not conservation-laws based, but empirically derived from measurement data. Such sub-models normally require extensive calibration before the models can be applied to analysis of real reactor problems. This work demonstrates a case study of calibration of a common model of subcooled flow boiling, which is an important multiscale, multiphysics phenomenon in LWR thermal hydraulics. The calibration process is based on a new strategy of model-data integration, in which, all sub-models are simultaneously analyzed and calibrated using multiple sets of data of different types. Specifically, both data on large-scale distributions of void fraction and fluid temperature and data on small-scale physics of wall evaporation were simultaneously used in this work’s calibration. In a departure from traditional (or common-sense) practice of tuning/calibrating complex models, a modern calibration technique based on statistical modeling and Bayesian inference was employed, which allowed simultaneous calibration of multiple sub-models (and related parameters) using different datasets. Quality of data (relevancy, scalability, and uncertainty) could be taken into consideration in the calibration process. This work presents a step forward in the development and realization of the “CIPS Validation Data Plan” at the Consortium for Advanced Simulation of LWRs to enable quantitative assessment of the CASL modeling of Crud-Induced Power Shift (CIPS) phenomenon, in particular, and the CASL advanced predictive capabilities, in general. This report is prepared for the Department of Energy’s Consortium for Advanced Simulation of LWRs program’s VUQ Focus Area.

97 MATHEMATICS AND COMPUTING↗

Validation of MCNP Critical Benchmark Models of PU-MET-FAST-016 [Slides]

The validation of PU-MET-FAST-016 contributed to the centralized LANL benchmark repository currently under development. The revisions made the MCNP models statistically, significantly more similar to the benchmark models. The overall impact on the USL is negligible. The revisions to the PU-MET-FAST-016 models provide value to the Los Alamos Benchmark Suite without invalidating past Whisper results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Predictive Indicators of the Performance of Large Language Models

In several mission contexts, it is desirable to estimate the performance of large language models (LLMs) on tasks that we cannot run directly. In light of published “scaling laws” our hypothesis is that some tasks should be consistently more challenging than others based on characteristics of the task. The goal of this project was to begin quantifying how much information about LLM performance can be gained from the features of a model and a task. Two of our statistical models struggled to converge. Pass/fail test results may provide limited information for inference beyond model quality and task difficulty, but we see no evidence at this time for significant feature interaction effect sizes, arguing for simple models. Future work extending the models to capitalize on perplexity of ground truth answers is suggested. This project also introduces “Depth of Knowledge Variant Testing” as a strategy for more finely assessing language models on open domain question and answer tasks. We developed sets of questions that ask a language model to produce similar information while demonstrating increasing depth of knowledge, and also relabeled existing Q&A test questions with their depth of knowledge. Our results suggest further consideration of Bloom’s taxonomy and further refinement of prompts to properly elicit information at varying depths. In the course of this work, we set up a basic infrastructure for standardizing tasks and testing many language models on these tasks. In addition to testing the predictive quality of model features and performance across test suites, with this project we have introduced two new task features to contextualize each test question: the Dewey Classification main category of information covered, and the Bloom’s taxonomy level that corresponds to the depth of knowledge probed by the question. Splits across these and other features produced over five hundred task subtypes with distinct feature vectors, which we tested on half a dozen models.

97 MATHEMATICS AND COMPUTING↗

Bayesian chain graph models to characterize microbe-environment dynamics

Microbiome data require statistical models that can simultaneously decode microbes' reaction to the environment and interactions among microbes. While a multiresponse linear regression model seems like a straight-forward solution, we argue that treating it as a graphical model is problematic given that the regression coefficient matrix does not encode the conditional dependence structure between response and predictor nodes. This observation is especially important in biological settings when we have prior knowledge on the edges from specific experimental interventions that can only be properly encoded under a conditional dependence model. Here, we propose a chain graph model with two sets of nodes (predictors and responses) whose solution yields a graph with edges that indeed represent conditional dependence, thus agreeing with the experimenter's intuition on the average behavior of nodes under treatment. The solution to our model is sparse via the Bayesian linear regression (LASSO). In addition, we propose an adaptive extension so that different shrinkages can be applied to different edges to incorporate edge-specific prior knowledge. Our model is computationally inexpensive through an efficient Gibbs sampling algorithm and can account for binary, counting, and compositional responses via an appropriate hierarchical structure. We test the performance of our model in a variety of simulated datasets, thereby showing superior performance to state-of-the-art approaches. We further apply our model to human gut and soil microbial compositional datasets, and we highlight that CG-LASSO can estimate biologically meaningful network structures in the data.

compositional data↗

Coordination procedure for radio relay and communication satellite services

A global rain rate statistic model is used to link microwave propagation statistics to measurable rain statistics in order to develop international telecommunication site criteria for radio relay and communication satellite services that minimize interference between receivers and transmitters. This rain coordination procedure utilizes a rain storm cell size, a statistical description of the rainfall rate within the cell valid for most of the earth's surface, approximations between Raleigh scatter and constancy of precipitation with altitude, and an analytic relation between radar reflectivity and rain rate.

Eckerman, J.↗

Magnetospheric plasma modeling (0-100 keV)

Spacecraft surface charging, which is primarily a current balance phenomenon, is in general a function of the dominant currents to and from the vehicle's surface. Within the near-earth magnetosphere the dominant currents to the surface are the ambient space plasma fluxes between approximately 0 and 100 keV. A major effort to understand the near-earth environment was initiated when spacecraft charging became a major issue. The present paper has the objective to summarize the basic features of the models which have resulted from this effort. A description is given of four categories of models, based primarily on the degree of empirical and theoretical input. Types of quantitative models are discussed, taking into account definitions, statistical models, analytic models, static models, and time-dependent models. Engineering models are also considered, giving attention to baseline models and 'worst-case' models.

Garrett, H. B.↗

Summertime photochemistry of the troposphere at high northern latitudes

Budgets of O3, NO(x), and NO(y), and acetic acid in the Arctic Boundary Layer Expedition (ABLE 3A) flight region are constructed using photochemical model statistics based on aircraft observations. A Lagrangian model is used to reconstruct the photochemical history of two aged biomass fire plumes sampled by the ABLE 3A aircraft. It is shown that anthropogenic influence on O3 levels in the Arctic may manifest itself not by long-range transport of pollution-derived O3, but rather by a decrease of the regional photochemical sink due to the presence of small amounts of NO(x). The low concentrations of NO(x) measured in ABLE 3A were sufficient to reduce the rate of photochemical loss appreciably relative to a NO(x)-free atmosphere, thus increasing the O3 lifetime. It is shown that decomposition of PAN can account for most of the NO(x) measured below 4-km altitude, but for only 20 percent at 6-km altitude. A lifetime of 29 days is estimated for NO(y) in the ABLE 23A flight region.

Jacob, D. J.↗

Stochastic performance modeling and evaluation of obstacle detectability with imaging range sensors

Statistical modeling and evaluation of the performance of obstacle detection systems for Unmanned Ground Vehicles (UGVs) is essential for the design, evaluation, and comparison of sensor systems. In this report, we address this issue for imaging range sensors by dividing the evaluation problem into two levels: quality of the range data itself and quality of the obstacle detection algorithms applied to the range data. We review existing models of the quality of range data from stereo vision and AM-CW LADAR, then use these to derive a new model for the quality of a simple obstacle detection algorithm. This model predicts the probability of detecting obstacles and the probability of false alarms, as a function of the size and distance of the obstacle, the resolution of the sensor, and the level of noise in the range data. We evaluate these models experimentally using range data from stereo image pairs of a gravel road with known obstacles at several distances. The results show that the approach is a promising tool for predicting and evaluating the performance of obstacle detection with imaging range sensors.

Matthies, Larry↗

Operational Implementation of a 2-Hour Prebreathe Protocol for International Space Station

Procedures, equipment, and analytical techniques were developed to implement the ground tested 2-hour protocol in-flight operations. The methods are: 1) The flight protocol incorporates additional safety margin over the ground tested protocol. This includes up to 20 min of additional time on enriched O2 during suit purge and pressure check, increased duration of extravehicular activity (EVA) preparation exercise during O2 prebreathing (up to 90 min vs; the tested 24 min), and reduced rates of depressurization. The ground test observations were combined with model projections of the conservative measures (using statistical models from Duke University and NASA JSQ to bound the risk of Type I and Type II decompression sickness (DCS). 2) An inflight exercise device using the in-flight ergometer and elastic tubes for upper body exercise was developed to replicate the dual cycle exercise in the ground trials. 3) A new in-flight breathing system was developed and man-tested. 4) A process to monitor inflight experience with the protocol, including the use of an in-suit Doppler bubble monitor when available, was developed. The results are: 1) The model projections of the conservative factors of the operational protocol were shown to reduce the risk of DCS to levels consistent with the observations of no DCS to date in the shuttle program. 2) Cross over trials of the dual cycle ergometer used in ground tests and the in-flight exercise system verified that02consumption and the % division of work between upper and lower body was not significantly different at the p= 0.05 level. 3) The in-flight breathing system was demonstrated to support work rates generating 75% O2(max) in 95 percentile subjects. 4) An in-flight monitoring plan with acceptance criteria was put in place for the 2-hour prebreathe protocol. And the conclusions are: The 2-hour protocol has been approved for flight, and all implementation efforts are in place to allow use of the protocol as early as flight ISS 7A, now scheduled in November of 2000.

Waligora, James M.↗

Lessons from Climate Modeling on the Design and Use of Ensembles for Crop Modeling

Working with ensembles of crop models is a recent but important development in crop modeling which promises to lead to better uncertainty estimates for model projections and predictions, better predictions using the ensemble mean or median, and closer collaboration within the modeling community. There are numerous open questions about the best way to create and analyze such ensembles. Much can be learned from the field of climate modeling, given its much longer experience with ensembles. We draw on that experience to identify questions and make propositions that should help make ensemble modeling with crop models more rigorous and informative. The propositions include defining criteria for acceptance of models in a crop MME, exploring criteria for evaluating the degree of relatedness of models in a MME, studying the effect of number of models in the ensemble, development of a statistical model of model sampling, creation of a repository for MME results, studies of possible differential weighting of models in an ensemble, creation of single model ensembles based on sampling from the uncertainty distribution of parameter values or inputs specifically oriented toward uncertainty estimation, the creation of super ensembles that sample more than one source of uncertainty, the analysis of super ensemble results to obtain information on total uncertainty and the separate contributions of different sources of uncertainty and finally further investigation of the use of the multi-model mean or median as a predictor.

Model ensembles↗

Quantifying Uncertainty in Epidemiological Models

Modern epidemiology has made use of a number of mathematical models, including ordinary differential equation (ODE) based models and agent based models (ABMs) to describe the dynamics of how a disease may spread within a population and enable the rational design of strategies for intervention that effectively contain the spread of the disease. Although such predictions are of fundamental importance in preventing the next global pandemic, there is a significant gap in trusting the outcomes/predictions solely based on such models. Hence, there is a need to develop approaches such that mathematical models can be calibrated against historical data. In addition, there is a need to develop rigorous uncertainty quantification approaches that can provide insights into when a model will fail and characterize the confidence in the (possibly multiple) model outcomes/predictions, when such retrospective analysis cannot be performed. In this paper, we outline an approach to develop uncertainty quantification approaches for epidemiological models using formal methods and model checking. By specifying the outcomes expected from a model in a suitable spatio-temporal logic, we use probabilistic model checking methods to quantify the probability with which the epidemiological model satisfies the specification. We argue that statistical model checking methods can solve the uncertainty quantification problem for complex epidemiological models.

model checking↗

Effects of nuclear orientation on fusion and fission process for reactions using actinide target nuclei

Fission fragment mass distributions in the reaction of {sup 30}Si+{sup 238}U were measured at the energies around the Coulomb barrier. At the above-barrier energies, the mass distribution showed Gaussian shape. At the sub-barrier energies, triple-humped distribution was observed, which consists of symmetric fission and asymmetric fission peaked at A{sub L}/A{sub H}approx =90/178. The asymmetric fission should be attributed to quasifission from the results of the measured evaporation residue (ER) cross-sections produced by {sup 30}Si+{sup 238}U. The cross-section for {sup 263}Sg at the above-barrier energy agree with the statistical model calculation which assumes that the measured fission cross-sections are equal to the fusion cross-sections, whereas the one for {sup 264}Sg measured at the sub-barrier energy is smaller than the calculation, indicating the presence for quasifission. We also report the results on the fragment mass distributions for {sup 36,34}S+{sup 238}U and {sup 40}Ar+{sup 238}U.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lithium-ion battery physics and statistics-based state of health model

A pseudo-2d model using COMSOL Multiphysics® software is developed to simulate performance and performance degradation of Li-ion batteries consisting of layered and olivine cathodes with graphite anode when subjected to peak shaving grid service. Multiple degradation pathways are considered, including solid electrolyte interphase (SEI) formation and breakdown at the anode, cathode dissolution and its synergistic effect on SEI formation at the anode. The model is validated by simulating commercial cylindrical cell performance. A global model is developed to simulate performance across all chemistries, along with individual chemistry models using global model parameters as initial values. There is good agreement between these models for various optimization parameters such as SEI equilibrium potential, cathode dissolution exchange current density, solvent diffusivity in the SEI and SEI ionic conductivity. To circumvent time constraints related to the COMSOL model, a 0d global model is developed which fits data well and provides more clarity on differences in cathode dissolution exchange current density. Again, good agreement for various optimization parameters is obtained among the COMSOL global & individual chemistry models and the 0-d model. The lessons learned from the physics-based model is used to develop a top down statistics-based model using current, voltage and anode volumetric change per mole lithium intercalated, along with their interactions as degradation predictors. This model predicts out of sample degradation for multiple grid services and electric vehicle drive cycle with high accuracy and provides the pathway to develop an efficient battery management system combining machine learning and findings from physics-based computationally intensive algorithms.

Crawford, Aladsair J.↗

Evaporation residue excitation function from complete fusion of {sup 19}F with {sup 184}W

Evaporation residue cross sections for {sup 19}F+{sup 184}W have been measured at beam energies in the range of 90-130 MeV using the Heavy Ion Reaction Analyzer at the Inter University Accelerator Centre. A new approach, based on Monte Carlo calculations, has been adopted for estimating evaporation residue (ER) transmission efficiency. The challenges in the detection of ERs caused by the presence of isomeric states with longer half-lives have been thoroughly discussed. Measured cross sections have been fitted with statistical model calculations treating the fission barrier as an adjustable parameter. Comparison with other neighboring systems with nearly similar entrance-channel mass asymmetry indicates the onset of instability in the compound nucleus {sub 83}{sup 203}Bi{sub 120} after crossing of the Z=82 shell.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isotopic dependence of the cross section for the induced fission of heavy nuclei

The cross sections for the induced fission of {sup 211-223}Ra, {sup 203-211}Rn, and {sup 221-231}Th nuclei undergoing peripheral collisions with {sup 208}Pb nuclei are calculated on the basis of the statistical model. The role of the N = 126 neutron shell is studied. The level density in excited nuclei is determined within the Fermi gas model and a model that takes into account the collective enhancement of the level density. The inclusion of a particle-hole excitation in addition to a collective Coulomb excitation makes it possible to obtain a satisfactory description of experimental cross sections for the fission of radium isotopes. The calculated ratios of the cross sections for the induced fission of {sup 236}U ({sup 237}U) and {sup 238}U ({sup 239}U) nuclei agree with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Studies of nuclei under the extreme conditions of density, temperature, isospin asymmetry and the phase diagram of hadronic matter

The main emphasis of the entire project is on issues having to do with medium energy and ultra-relativistic energy and heavy ion collisions. A major goal of both theory and experiment is to study properties of hot dense nuclear matter under various extreme conditions and to map out the phase diagram in density or chemical potential and temperature. My studies in medium energy nuclear collisions focused on the liquid-gas phase transition and cluster yields from such transitions. Here I developed both the statistical model of nuclear multi-fragmentation and also a mean field theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗