Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sequencing data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Thermal adaptation analyzed by comparison of protein sequences from mesophilic and extremely thermophilic Methanococcus species

The genome sequence of the extremely thermophilic archaeon Methanococcus jannaschii provides a wealth of data on proteins from a thermophile. In this paper, sequences of 115 proteins from M. jannaschii are compared with their homologs from mesophilic Methanococcus species. Although the growth temperatures of the mesophiles are about 50 degrees C below that of M. jannaschii, their genomic G+C contents are nearly identical. The properties most correlated with the proteins of the thermophile include higher residue volume, higher residue hydrophobicity, more charged amino acids (especially Glu, Arg, and Lys), and fewer uncharged polar residues (Ser, Thr, Asn, and Gln). These are recurring themes, with all trends applying to 83-92% of the proteins for which complete sequences were available. Nearly all of the amino acid replacements most significantly correlated with the temperature change are the same relatively conservative changes observed in all proteins, but in the case of the mesophile/thermophile comparison there is a directional bias. We identify 26 specific pairs of amino acids with a statistically significant (P < 0.01) preferred direction of replacement.

NASA Discipline Exobiology↗

High-quality Acinetobacter genomes recovered from combat wounds via metagenomic sequencing resemble cultured isolate genomes

The ability to accurately characterize wound pathogens is critical to informing clinical decisions for wound infections with complex treatment requirements. Acinetobacter baumannii is an impactful nosocomial pathogen in combat wounds and civilian hospital-acquired infections. An informed understanding of the phylogenetics and epidemiology of A. baumannii infections in military and civilian environments could guide approaches that improve antibiotic treatment regimens for both military and civilian patients. Whole-genome data for bacterial strains can be difficult to obtain due to challenges in culturing isolates from preserved military specimens. Metagenomic sequencing and assembly create opportunities for genomic analysis of pathogens directly from clinical specimens. The ability to perform comparative analyses between metagenome-derived genomes and culture-derived genomes would support a range of comparative bacterial genomic studies. Wound tissue biopsy and effluent samples from combat injuries were subjected to metagenomic sequencing and assembly. In total, 42 microbial metagenome-assembled genomes (MAGs) were obtained directly from metagenomic sequence data, 36 of which were designated “high” quality. Thirty of these genomes corresponded to Acinetobacter, with 29 mapping specifically to A. baumannii. Other observed genera included Bordetella, Citrobacter, Escherichia, and Pseudomonas. Single-copy and multi-copy orthologs were identified across Acinetobacter MAGs and publicly available isolate genomes derived from military and civilian sources. Both MAG and military isolate genomes were annotated with antimicrobial resistance data, and MAG genomes were statistically comparable to genomes obtained from isolates. Our results highlight the potential of de novo metagenome assembly for enabling high-resolution characterization directly from clinical specimens, thereby improving diagnostic precision, guiding antimicrobial stewardship, and enhancing understanding of pathogen evolution across diverse healthcare and battlefield environments.

Acinetobacter baumannii↗

Tetranucleotide frequencies differentiate genomic boundaries and metabolic strategies across environmental microbiomes

Microbiomes are constrained by physicochemical conditions, nutrient regimes, and community interactions across diverse environments, yet genomic signatures of this adaptation remain unclear. Metagenome sequencing is a powerful technique to analyze genomic content in the context of natural environments, establishing concepts of microbial ecological trends. Here, we developed a data discovery tool-a tetranucleotide-informed metagenome stability diagram-that is publicly available in the integrated microbial genomes and microbiomes (IMG/M) platform for metagenome ecosystem analyses. We analyzed the tetranucleotide frequencies from quality-filtered and unassembled sequence data of over 12,000 metagenomes to assess ecosystem-specific microbial community composition and function. We found that tetranucleotide frequencies can differentiate communities across various natural environments and that specific functional and metabolic trends can be observed in this structuring. Our tool places metagenomes sampled from diverse environments into clusters and along gradients of tetranucleotide frequency similarity, suggesting microbiome community compositions specific to gradient conditions. Within the resulting metagenome clusters, we identify protein-coding gene identifiers that are most differentiated between ecosystem classifications. We plan for annual updates to the metagenome stability diagram in IMG/M with new data, allowing for refinement of the ecosystem classifications delineated here. This framework has the potential to inform future studies on microbiome engineering, bioremediation, and the prediction of microbial community responses to environmental change. IMPORTANCE: Microbes adapt to diverse environments influenced by factors like temperature, acidity, and nutrient availability. We developed a new tool to analyze and visualize the genetic makeup of over 12,000 microbial communities, revealing patterns linked to specific functions and metabolic processes. This tool groups similar microbial communities and identifies characteristic genes within environments. By continually updating this tool, we aim to advance our understanding of microbial ecology, enabling applications like microbial engineering, bioremediation, and predicting responses to environmental change.

Kellom, Matthew↗

Data for "Design of Diverse, Functional Mitochondrial Targeting Sequences Across Eukaryotic Organisms Using Variational Autoencoder"

Mitochondria play a key role in energy production and metabolism, making them a promising target for metabolic engineering and disease treatment. However, despite the known influence of passenger proteins on localization efficiency, only a few protein-localization tags have been characterized for mitochondrial targeting. To address this limitation, we leverage a Variational Autoencoder to design novel mitochondrial targeting sequences. In silico analysis reveals that a high fraction of the generated peptides (90.14%) are functional and possess features important for mitochondrial targeting. We characterize artificial peptides in four eukaryotic organisms and, as a proof-of-concept, demonstrate their utility in increasing 3-hydroxypropionic acid titers through pathway compartmentalization and improving 5-aminolevulinate synthase delivery by 1.62-fold and 4.76-fold, respectively. Moreover, we employ latent space interpolation to shed light on the evolutionary origins of dual-targeting sequences. Overall, our work demonstrates the potential of generative artificial intelligence for both fundamental research and practical applications in mitochondrial biology.

AI/ML↗

High-speed multiplexing of keyboard data inputs

A high speed multiplexing system is described in which keyboard entered data is sequentially and automatically sampled by the multiplexing system for input to a computer. A sequencer is provided which sequentially and automatically controls the multiplexer to sample each keyboard input in accordance with a predetermined sampling sequence. Whenever keyboard entered data appears on input lines to the multiplexer, the system inputs the keyboard data to the computer during a brief time interval in which the multiplexer remains at the particular keyboard address or port. Thus, a high speed sampling circuit is provided whereby the only operator action required is data entry through a keyboard. Priority or interrupt systems are not required.

Anderson, T. O.↗

The engineering design integration (EDIN) system

A digital computer program complex for the evaluation of aerospace vehicle preliminary designs is described. The system consists of a Univac 1100 series computer and peripherals using the Exec 8 operating system, a set of demand access terminals of the alphanumeric and graphics types, and a library of independent computer programs. Modification of the partial run streams, data base maintenance and construction, and control of program sequencing are provided by a data manipulation program called the DLG processor. The executive control of library program execution is performed by the Univac Exec 8 operating system through a user established run stream. A combination of demand and batch operations is employed in the evaluation of preliminary designs. Applications accomplished with the EDIN system are described.

Glatt, C. R.↗

Selecting a general-purpose data compression algorithm

The National Space Science Data Center's Common Data Formate (CDF) is capable of storing many types of data such as scalar data items, vectors, and multidimensional arrays of bytes, integers, or floating point values. However, regardless of the dimensionality and data type, the data break down into a sequence of bytes that can be fed into a data compression function to reduce the amount of data without losing data integrity and thus remaining fully reconstructible. Because of the diversity of data types and high performance speed requirements, a general-purpose, fast, simple data compression algorithm is required to incorporate data compression into CDF. The questions to ask are how to evaluate and compare compression algorithms, and what compression algorithm meets all requirements. The object of this paper is to address these questions and determine the most appropriate compression algorithm to use within the CDF data management package that would be applicable to other software packages with similar data compression needs.

Mathews, Gary Jason↗

Method Development for In-situ Detection of Latent Herpesvirus DNA from Saliva using Nanopore Sequencing

Research toward latent herpesvirus reactivation has been intensively addressed through Space Shuttle and International Space Station (ISS) investigations. This work has provided the understanding that persistent reactivation of herpesviruses from asymptomatic crew can be detected through viral shedding in saliva, urine, and blood. Occasionally, viral reactivation from the latency stage can pose a threat to crew health (clinical manifestation) before, during, and after flight missions. Furthermore, previous work detailing correlations with immunity indicate that monitoring viral reactivation could be implemented to assess potential immune dysfunction. While in-flight monitoring is desirable, there is no well-established procedure or method for real-time evaluations, and research to date has relied on postflight, ground-based analysis. The development of portable molecular technologies like the miniPCR™ (miniPCR Bio) thermal cycler and the MinION™ sequencer (Oxford Nanopore Technologies) have confirmed that real-time monitoring is possible in extreme and low resource environments. These devices, combined with simple sample preparation methods, have been used to demonstrate bacterial identification onboard the ISS, as well as rapid viral detection in remote locations on Earth. The work here builds upon previous molecular advancements onboard the ISS toward the development and validation of a spaceflight-compatible method for viral detection from crew samples. Several herpesviruses can be detected in saliva, which provides a non-invasive means to collect samples for monitoring. While the basis for this method lies in previous spaceflight investigations, key points for method optimization include DNA extraction from saliva, viral primer selection, and bioinformatic processes for data analysis. To increase viral yield, numerous DNA extraction methods have been evaluated and will be discussed in detail. For initial development and testing, varicella-zoster virus (VZV) is being targeted though open reading frame 51 and 63 (ORF51, ORF63), as the replication origin-binding protein is highly expressed during latency. Optimization of the thermal cycling parameters has resulted in the ability to test the entire process. The full method has been tested with both viral VZV DNA standards and saliva spiked with varying concentrations of VZV. Viral sequence data were mapped to the reference sequence using minimap2. Prior to mapping, DNA sequencing reads were filtered for length and quality, barcodes were removed, and alignment identity calculated. Following further assessments, statistics were compared across multiple sequencing experiments and are being used to determine the success of the protocols. Forward work will include the incorporation of herpes simplex virus 1 (HSV-1) and Epstein-Barr virus (EBV) primers as well as the validation of results to the terrestrial qPCR standard assay. Upon full validation of the developed method, saliva will be collected from 20 healthy subjects and spiked with viral DNA. These samples will be split and assayed with the MinION and standard qPCR assay.

Hang N Nguyen↗

A software system for emission spectrometry

A computer system was developed for an emission spectrometry facility consisting of a direct current (DC) argon arc spectrograph optically coupled to an inductively coupled plasma multichannel spectrometer. Custom hardware and software were designed to control analytical functions and perform data acquisition. The software system was designed to make operation of the facility simple for routine operation and flexible for research and development. Special software was written to collect data under controlled conditions to characterize and monitor system response. One sequence collects intensity versus time data on all channels and displays the data graphically. These profiles are useful in studying the effects of operating parameters on measurement precision. Another special sequence performs calibration using a spline curve fit procedure. Routines were also written to measure dark currents and signals from a standard tungsten halogen lamp mounted in place of the DC arc. For quality control purposes, histories of these values are kept and monitored for excess scatter or drift.

Auping, J. V.↗

Random digital encryption secure communication system

The design of a secure communication system is described. A product code, formed from two pseudorandom sequences of digital bits, is used to encipher or scramble data prior to transmission. The two pseudorandom sequences are periodically changed at intervals before they have had time to repeat. One of the two sequences is transmitted continuously with the scrambled data for synchronization. In the receiver portion of the system, the incoming signal is compared with one of two locally generated pseudorandom sequences until correspondence between the sequences is obtained. At this time, the two locally generated sequences are formed into a product code which deciphers the data from the incoming signal. Provision is made to ensure synchronization of the transmitting and receiving portions of the system.

Doland, G. D.↗

Analysis of C II resonance lines in some main sequence early-type stars

IUE data are used to investigate C II resonance lines at 1335 A in eight main-sequence stars of spectral types from A0 to B3, and both LTE and non-LTE line profiles have been computed. In stars with low rotational velocities (such as Vega, Pi Cet, and Tau Her), logarithmic carbon abundances log N(C/H) of -3.55 to -3.45 are obtained for the non-LTE case. The LTE analysis reveals lower carbon abundances by about 0.1 dex. Significant differences among the fast rotating stars are pointed out.

Cugier, H.↗

Biological Information Signal Processor

Biological Information Signal Processor (BISP) is computing system analyzing data on deoxyribonucleic acid (DNA) sequences for molecular genetic analysis. Includes coprocessors, specialized microprocessors complementing present and future computers by performing rapidly most-time-consuming DNA-sequence-analyzing functions, establishing relationships (alignments) between both global sequences and defining patterns in multiple sequences. Also includes state-of-art software and data-base systems on both conventional and parallel computer systems to augment analytical abilities of developmental coprocessors.

Chow, Edward T.↗

Science Autonomy in Robotic Exploration

Historical mission operations have involved: (1) return of scientific data; (2) evaluation of these data by scientists; (3) recommendations for future mission activity by scientists; (4) commands for these transmitted to the craft; and (5) the activity being undertaken. This cycle is repeated throughout the mission with command opportunities once or twice per day. For a rover, this historical cycle is not amenable to rapid long range traverses or rapid response to any novel or unexpected situations. In addition to real-time response issues, imaging and/or spectroscopic devices can produce tremendous data volumes during a traverse. However, such data volumes can rapidly exceed on-board memory capabilities prior to the ability to transmit it to Earth. Additionally, the necessary communication band-widths are restrictive enough so that only a small portion of these data can actually be returned to Earth. Such scenarios suggest enabling some science decisions to be made on-board the robots. These decisions involve automating various aspects of scientific discovery instead of the electromechanical control, health, and navigation issues associated with robotic operations. The robot retains access to the full data fidelity obtained by its scientific sensors, and is in the best position to implement actions based upon these data. Such an approach would eventually enable the robot to alter observations and assure only the highest quality data is obtained for analysis. Additionally, the robot can begin to understand what is scientifically interesting and implement alternative observing sequences, because the observed data deviate from expectations based upon current theories/models of planetary processes. Such interesting data and/or conclusions can then be prioritized and selectively transmitted to Earth; reducing memory and communications demands. Results of Ames' current work in this area will be presented.

Roush, Ted L.↗

Robotic Exploration: The Role of Science Autonomy

Historical mission operations have involved: (1) return of scientific data; (2) evaluation of these data by scientists; (3) recommendations for future mission activity by scientists; (4) commands for these transmitted to the craft; and (5) the activity being, undertaken. This cycle is repeated throughout the mission with command opportunities once or twice per day. For a rover, this historical cycle is not amenable to rapid long range traverses or rapid response to any novel or unexpected situations. In addition to real-time response issues, imaging and/or spectroscopic devices can produce tremendous data volumes during a traverse. However, such data volumes can rapidly exceed on-board memory capabilities prior to the ability to transmit it to Earth. Additionally, the necessary communication band-widths are restrictive enough so that only a small portion of these data can actually be returned to Earth. Such scenarios suggest enabling some science decisions to be made on-board the robots. These decisions involve automating various aspects of scientific discovery instead of the electromechanical control, health, and navigation issues associated with robotic operations. The robot retains access to the full data fidelity obtained by its scientific sensors, and is in the best position to implement actions based upon these data. Such an approach would eventually enable the robot to alter observations and assure only the highest quality data is obtained for analysis. Additionally, the robot can begin to understand what is scientifically interesting and implement alternative observing sequences, because the observed data deviate from expectations based upon current theories/models of planetary processes. Such interesting data and/or conclusions can then be prioritized and selectively transmitted to Earth; reducing memory and communications demands. Results of Ames' current work in this area will be presented.

Roush, Ted L.↗

Post-test data report for the space shuttle full-scale AFRSI sequence of environments test (OS-305-1 to -5) in the NASA/Ames Research Center 11x11-foot wind tunnel

The Advanced Flexible Reusable Surface Insulation (AFRSI) test article was wind tunnel tested. The AFRSI was exposed to a simulated ascent airloads environment and data was obtained which could be used to support the AFRSI certification program. The AFRSI sequence of environments also included radiant heating (1500 degrees Fahrenheit) and wind/rain environments. The test article was wind/rain conditioned before each wind tunnel entry and was thermally conditioned after each wind tunnel entry. The AFRSI failed and the test was aborted before reaching the ascent environment. The AFRSI test article sequentially exposed to 50 wind/rain and 49 simulated entry thermal missions, as well as four wind tunnel entries equivalent to 40 ascent missions.

Marshall, B. A.↗

VirJenDB: a FAIR (meta)data and bioinformatics platform for all viruses

High-throughput sequencing has generated an unprecedented volume of data. However, researcher-submitted data in repositories requires extensive curation and quality control for reuse. These tasks are hindered by the multiplicity of repositories, the sheer volume of the data, and the complexity of virus (meta)data curation. To address these challenges, VirJenDB offers a user-friendly platform to facilitate versioned, community-driven curation, and ontology development. Virus sequences were ingested from 16 sources, including ~200 fields of metadata or standards, covering taxonomy, sample, and host information. Up to 85 metadata fields have undergone at least one round of curation, and are linked to 15.4 million virus sequences, with 88 % from those infecting eukaryotes and the remaining infecting prokaryotes. Subsets were created, including a novel collection of 0.91 million viral operational taxonomic unit (vOTU) sequences across all viruses, while keeping the original sequences from each vOTU to facilitate downstream analyses, e.g. sequence variation. The VirJenDB web portal (https://www.virjendb.org) provides HTTPS and Application Programming Interface (API) access to the sequence datasets and metadata, offering a search engine, filtering, download, visualizations, and documentation. VirJenDB aims to connect the phage and eukaryotic virus research communities by supporting webtool integration, meta-analyses, and metadata schema extensions.

Saghaei, Shahram↗

An investigation of a stoppable helicopter rotor with circulation control

A stoppable helicopter rotor with circulation control was investigated in the Ames 40 by 80 foot wind tunnel. The model was tested as a rotating wing, a fixed wing, and during transition start/stop sequences. The capability of the model's control system to maintain pitch and roll moment balance during the start/stop sequence, the ability of the blades to withstand the start/stop loads, the adequacy of the control system to maintain balance in the helicopter mode, and the control system capabilities in the fixed-wind mode were assessed. Time-history data of several start/stop sequences of the X-wing rotor, and the steady-state data relating to the model as both a rotor and as a fixed-wing aircraft are presented. In addition, stability data are presented which were acquired during open-loop and closed-loop tests of the hub moment feedback control system.

Ballard, J. D.↗