Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stack design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Optimization of composite laminates

Design of composite structures can be viewed as a multi-faceted task, one which requires integration of issues related to composite mechanics, structural analysis, optimization, and manufacturing. The major coverage of the paper is on the issue of optimization, with special emphasis on the use of optimization for designing with discrete and integer valued variables required for the stacking-sequence optimization. Different techniques that can be used for stacking sequence optimization are introduced, and different aspects of their application are demonstrated for laminate buckling optimization.

Gurdal, Zafer↗

Results from the Martian Radiation Environment Experiment MARIE

One of the three science instruments aboard the 2001 Mars Odyssey spacecraft is the Martian Radiation Environment Experiment, MARIE. MARIE consists of a stack of silicon detectors, augmented by a Cerenkov detector. MARIE is designed to measure a portion of the particle spectrum of the Galactic Cosmic Rays (GCR), as well as the high fluxes of low-energy protons (energies less than about 100 MeV) that are intermittently produced by active regions on the sun in Solar Particle Events (SPE). MARIE is providing the first detailed information about the radiation environment near Mars.measurements. MARIE has been operating successfully for nearly a year. Solar particle events of considerable interest have been observed, and data have been obtained that will yield GCR spectra from a novel observation point in the solar system.

Zeitlin, C.↗

Portable direct methanol fuel cell systems

This article includes discussion of the specific power and power density requirements for various portable system applications, the status of stack technology, progress in the implementation of balance-of-plant designs, and a summary of the characteristics of various DMFC portable power source demonstrations.

direct methanol fuel cells↗

Monte Carlo Simulation to Estimate Likelihood of Direct Lightning Strikes

A software tool has been designed to quantify the lightning exposure at launch sites of the stack at the pads under different configurations. In order to predict lightning strikes to generic structures, this model uses leaders whose origins (in the x-y plane) are obtained from a 2D random, normal distribution.

Mata, Carlos↗

Auto-Gopher: A Wireline Deep Sampler Driven by Piezoelectric Percussive Actuator and EM Rotary Motor

The ability to penetrate subsurfaces and perform sample acquisition at depth of meters may be critical for future NASA in-situ exploration missions to bodies in the solar system, including Mars and Europa. A corer/sampler was developed with the goal of enabling acquisition of samples from depths of several meters where if used on Mars would be beyond the oxidized and sterilized zone. For this purpose, we developed a rotary-hammering coring drill, called Auto-Gopher, which employs a piezoelectric actuated percussive mechanism for breaking formations and an electric motor that rotates the bit to remove the powdered cuttings. This sampler is a wireline mechanism that can be fed into and retrieved from the drilled hole using a winch and a cable. It includes an inchworm anchoring mechanism allowing the drill advancement and weight on bit control without twisting the reeling and power cables. The penetration rate is being optimized by simultaneously activating the percussive and rotary motions of the Auto-Gopher. The percussive mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that is driven by piezoelectric stack and that was demonstrated to require low axial preload. The design and fabrication of this device were presented in previous publications. This paper presents the results of laboratory and field tests and lessons learned from this development.

piezoactuation↗

Lustre on Red Sky.

The goals of Lustre on Red Sky are: (1) provide home/projects/scratch Lustre file systems; (2) adhere to the Sun HPC stack; (3) implement software RAID on Sun provided JBODs; and (4) design for easy administration. Conclusions are: (1) software RAID includes additional risks and administration vs. hardware RAID solutions; (2) limited testing of hardware in these configurations make it ill-suited for rapid deployment in a production environment; and (3) Lustre has been a shining star on this machine, Red Sky users are pleased with its performance.

99 GENERAL AND MISCELLANEOUS↗

Equivalent circuit analysis of radiative coupling in monolithic tandem solar cells

As solar cell efficiency improves towards the Shockley-Queisser limit, so does the radiative efficiency of the cell. For tandem stacks of cells where energy conversion efficiency now exceeds 46%, radiative coupling between the cells is becoming increasingly important to consider in cell design, measurement, and performance prediction. We show how an equivalent circuit model can capture the complex radiative interactions between cells in such tandem stacks, allowing more insight into the impact on cell performance. The circuit's use is demonstrated by deriving results relevant to the critical step of eliminating coupling effects from measured cell spectral responses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

IOPro: a parallel I/O profiling and visualization framework for high-performance storage systems

Efficient execution of large-scale scientific applications requires high-performance computing systems designed to meet the I/O requirements. To achieve high-performance, such data-intensive parallel applications use a multi-layer layer I/O software stack, which consists of high-level I/O libraries such as PnetCDF and HDF5, the MPI library, and parallel file systems. To design efficient parallel scientific applications, understanding the complicated flow of I/O operations and the involved interactions among the libraries is quintessential. Such comprehension helps identify I/O bottlenecks and thus exploits the potential performance in different layers of the storage hierarchy. To profile the performance of individual components in the I/O stack and to understand complex interactions among them, we have implemented a GUI-based integrated profiling and analysis framework, IOPro. IOPro automatically generates an instrumented I/O stack, runs applications on it, and visualizes detailed statistics based on the user-specified metrics of interest. We present experimental results from two different real-life applications and show how our framework can be used in practice. By generating an end-to-end trace of the whole I/O stack and pinpointing I/O interference, IOPro aids in understanding I/O behavior and improving the I/O performance significantly.

97 MATHEMATICS AND COMPUTING↗

An open source analysis framework for large-scale building energy modeling

Full integration of building energy modelling into the design and retrofit process has long been a goal of building scientists and practitioners. However, significant barriers still exist. Among them are the lack of available: (1) configurable technology stacks for performing both small- and large-scale analyses, (2) different classes of algorithms compatible with common design workflows, and (3) analysis tools for effectively visualizing large-scale simulation results. This article discusses the OpenStudio® Analysis Framework: a scalable analysis framework for building energy modelling that was developed to overcome the three barriers listed above. The framework is open-source and scalable to facilitate wider adoption and has a clearly defined application programming interface upon which other applications can be built. It runs on high-performance computing systems, within cloud infrastructure, and on laptops, and uses a common workflow to enable different classes of algorithms. Lessons learned from previous development efforts are also discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A cryogenic muon tagging system based on kinetic inductance detectors for superconducting quantum processors

Ionizing radiation has emerged as a potential limiting factor for superconducting quantum processors, inducing quasiparticle bursts and correlated errors that challenge fault-tolerant operation. Atmospheric muons are particularly problematic due to their high energy and penetration power, making passive shielding ineffective. Therefore, monitoring the real-time muon flux is crucial to guide the development of alternative error-correction or mitigation strategies. We present the design, simulation, and first operation of a cryogenic muon-tagging system based on kinetic inductance detectors (KIDs), developed as a stand-alone cryogenic particle-tagging module for superconducting quantum processors. The system consists of two KIDs arranged in a vertical stack and operated at ∼20 mK. Monte Carlo simulations based on Geant4 guided the prototype design and provided reference expectations for muon-tagging efficiency and accidental coincidences due to ambient γ-rays. We observed a muon-induced coincidence rate among the top and bottom detectors of (192 ± 9) $\times\,10^{-3}$ events s$^{−1}$, in excellent agreement with the Monte Carlo prediction. The prototype achieves a muon-tagging efficiency of about 90% with negligible dead time. These results demonstrate the feasibility of operating a muon-tagging system at millikelvin temperatures and represent a key step toward the integration of cryogenic veto systems with multi-qubit chips to mitigate muon-induced errors.

Mariani, Ambra [INFN, Rome] (ORCID:000000028184857↗

The shape recovery conditions for Fe–Mn–Si alloys: An interplay between martensitic transformation and plasticity

Highlights: • Fe15Mn5Si9Cr5Ni samples were rolled at 800 °C and annealed at 650 (C1) and 1000 °C (C2). • TEM analysis was performed. • High density of stacking faults and appropriate density of dislocation appears in C1. • Complex dislocation arrays due to plastic deformation are observed in C2. • Shape memory properties depend on the thermomechanical treatment. - Abstract: This work analyses the improvement of the shape memory properties of Fe-Mn-Si based alloys, and expands upon and deepens recently published developments concerning this topic. We prepared TEM specimens from a Fe-15Mn-5Si-9Cr-5Ni sheet rolled at 800 °C and annealed at 650 °C–92% shape recovery – and from another sheet annealed at 1000 °C–45% shape recovery. Here, we analyse the development of microstructure during the γ ↔ ε martensitic transformation and correlate it with the shape memory behaviour. Among the observed microstructural features, the introduction of complex dislocation arrays due to plastic deformation appears to be critical for shape memory development, since they can arrest the backward movement of Shockley partial dislocations over the original path. Tailoring the microstructure in order to introduce a high stacking-fault density accompanied by an appropriate dislocation density remains a key issue in the design of these kinds of functional materials.

36 MATERIALS SCIENCE↗

Study of charge transfer interaction modes in the mixed Donor-Acceptor cocrystals of pyrene derivatives and TCNQ: A combined structural, thermal, spectroscopic, and hirshfeld surfaces analysis

Highlights: • Three pyrene derivatives were synthesized as donors. • Co-crystallization of donor and acceptor resulted in mixed CT cocrystals. • The crystal structures and packing of the CT mixed assemblies are studied. • CT state has been affirmed by spectroscopic measurements. • The three cocrystals exhibited strong absorptions extend to near infrared. - Abstract: The role of charge-transfer (CT) interactions in the synthesis of charge-transfer (CT) complexes is of great significance, which has led to promising materials for a range of applications. Herein, we report the synthesis of three new binary mixed stack CT systems I, II, and III, grown by solvent evaporation technique involving, 1-(naphthalene-2-yl)− 3-(pyrene-1-yl)prop-2-en-1-one (NPPO), 3-(pyrene-1-yl)− 1-(thiophene-2-yl)prop-2-en-1-one (PTPO) and 2-phenyl-3-(pyrene-2-yl)acrylonitrile (PPA) as the donors and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as an acceptor material. X-ray diffraction, thermal behavior, and spectroscopic analysis affirm the formation of CT complex and material purity. Based on the structural analysis the three CT complexes exhibit mixed stack arrangement (DAD-DAD) directed by the CT π–π interactions while the auxiliary hydrogen bonds (C-H-O, and C-H-N) stabilize and contribute to the overall packing of CT complexes. Remarkably, the complexes exhibit strong CT absorptions spreading to near infrared, making the crystals appear black. Not to mention, Hirshfeld surface analysis was employed to study the different intermolecular interactions and crystal packing in these materials. These results indicate that such a cocrystal design helps to explore new D-A systems, particularly with a mixed stack, that might have potential research values for applications in materials science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking optimization of compressor blades of gas turbine engines

A procedure is presented to obtain optimal designs of axial compressor blades with structural design constraints. Coefficients of the polynomials defining the circumferential tilting angles and the axial leaning distances of the airfoil cross sections from the initial design geometry are used as design variables. The compressor blades are modeled by 20-node solid elements. An efficient finite element method is developed for modal analysis and sensitivity analysis with respect to the design variables. Based on this information, a sequential linear programming method is applied to calculate the required change of geometry for the desired structural design constraints.

Cheu, Tsu-Chien↗

FERMI LAT STACKING ANALYSIS OF SWIFT LOCALIZED GRBs

We perform a comprehensive stacking analysis of data collected by the Fermi Large Area Telescope (LAT) of γ -ray bursts (GRBs) localized by the Swift spacecraft, which were not detected by the LAT but which fell within the instrument’s field of view at the time of trigger. We examine a total of 79 GRBs by comparing the observed counts over a range of time intervals to that expected from designated background orbits, as well as by using a joint likelihood technique to model the expected distribution of stacked counts. We find strong evidence for subthreshold emission at MeV to GeV energies using both techniques. This observed excess is detected during intervals that include and exceed the durations typically characterizing the prompt emission observed at keV energies and lasts at least 2700 s after the co-aligned burst trigger. By utilizing a novel cumulative likelihood analysis, we find that although a burst’s prompt γ -ray and afterglow X-ray flux both correlate with the strength of the subthreshold emission, the X-ray afterglow flux measured by Swift ’ s X-ray Telescope at 11 hr post trigger correlates far more significantly. Overall, the extended nature of the subthreshold emission and its connection to the burst’s afterglow brightness lend further support to the external forward shock origin of the late-time emission detected by the LAT. These results suggest that the extended high-energy emission observed by the LAT may be a relatively common feature but remains undetected in a majority of bursts owing to instrumental threshold effects.

79 ASTRONOMY AND ASTROPHYSICS↗

A structural model for composite rotor blades and lifting surfaces

Composite material systems are currently candidates for aerospace structures, primarily for the design flexibiity they offer i.e., it is possible to tailor the material and manufacturing approach to the application. Two notable examples are the wing of the Grumman/USAF/DARPA X-29 and rotor blades under development by the U.S.A. Aerostructures Directorate (AVSCOM), Langley Research Center. A working definition of elastic or structural tailoring is the use of structural concept, fiber orientation, ply stacking sequence, and a blend of materials to achieve specific performance goals. In the design process, choices of materials and dimensions are made which produce specific response characteristics which permit the selected goals to be achieved. Common choices for tailoring goals are preventing instabilities or vibration resonances or enhancing damage tolerance. An essential, enabling factor in the design of tailored composite structures is structural modeling that accurately, but simply, characterizes response. The objective of this paper is to improve the single-cell beam model for composite rotor blades or lifting surfaces and to demonstrate its usefullness in applications.

Rehfield, Lawrence W.↗

Transparent electrodes for high E-field production using a buried indium tin oxide layer

We present a design and characterization of optically transparent electrodes suitable for atomic and molecular physics experiments where high optical access is required. The electrodes can be operated in air at standard atmospheric pressure and do not suffer electrical breakdown even for electric fields far exceeding the dielectric breakdown of air. This is achieved by putting an indium tin oxide coated dielectric substrate inside a stack of dielectric substrates, which prevents ion avalanche resulting from Townsend discharge. With this design, we observe no arcing for fields of up to 120 kV/cm. Using these plates, we directly verify the production of electric fields up to 18 kV/cm inside a quartz vacuum cell by a spectroscopic measurement of the dc Stark shift of the 5{sup 2}S{sub 1/2} → 5{sup 2}P{sub 3/2} transition for a cloud of laser cooled rubidium atoms. We also report on the shielding of the electric field and on the residual electric fields that persist within the vacuum cell once the electrodes are discharged. In addition, we discuss observed atom loss that results from the motion of free charges within the vacuum. The observed asymmetry of these phenomena on the bias of the electrodes suggests that field emission of electrons within the vacuum is primarily responsible for these effects and may indicate a way of mitigating them.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stacking-engineered ferroelectricity in bilayer boron nitride

Stacking a ferroelectric Properties of layered van der Waals structures can depend sensitively on the stacking arrangement of constituent layers. This phenomenon has been exploited to engineer superconducting, correlated insulator, and magnetic states. Two groups now show that ferroelectricity can also be engineered through stacking: Parallel-stacked bilayers of hexagonal boron nitride exhibit ferroelectric switching even though the bulk material is not ferroelectric (see the Perspective by Tsymbal). To explore these phenomena, Yasuda et al. used transport measurements, whereas Vizner Stern et al. focused on atomic force microscopy. Science , abd3230 and abe8177, this issue p. 1458 and p. 1462 ; see also abi7296, p. 1389

Science & Technology - Other Topics↗

2010 JANNAF Abstract Propulsion System Status: Ares First Stage

In November 2005, NASA created the Constellation Program to develop an entirely new fleet of spacecraft to include the Ares I Crew Launch Vehicle and the Ares V Cargo Launch vehicles. The Ares I First Stage Team has made significant progress on the design of a propulsion system capable of lofting that new fleet. To minimize technical risks and development costs, the Solid Rocket Boosters (SRBs) of Shuttle served as a starting point in the design of a new motor that would meet the requirements of those new vehicles. By bringing in a fifth segment, this new propulsive element will provide greater total impulse to loft a safer, more powerful fleet of space flight vehicles. Additional modifications include the use of composite structures, new metallic forward structures, new parachutes, a new propellant grain design, and a new nozzle. Although still ongoing and in process, significant design, development and concept testing has already been conducted. This includes a full-scale motor firing, deceleration subsystem testing, and testing of several complete avionics line replaceable units. The suborbital development flight, Ares I-X, provided the opportunity to gather critical data about the flight dynamics of the integrated launch vehicle stack. The Ares I-X test flight has also informed our Ares First Stage design. It brought a more comprehensive understanding in a number of areas, which are now being analyzed. This paper will provide an overview of the design, development, challenges, and progress on the production of the new Ares First Stage propulsion system. Challenges and mitigation strategies will be addressed. An overview will also be included of testing to date.

Tiller, Bruce K.↗