Search NASA⌕ Search

SEARCH · Search NASA

Results for “Step Height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Quantum utility in simulating the real-time dynamics of the Fermi–Hubbard model using superconducting quantum computers

The Fermi–Hubbard model is a fundamental model in condensed matter physics that describes strongly correlated electrons. On the other hand, quantum computers are emerging as powerful tools for exploring the complex dynamics of these quantum many-body systems. In this work, we demonstrate the quantum simulation of the one-dimensional Fermi–Hubbard model using IBM's superconducting quantum computers, employing over 100 qubits. We introduce a first-order Trotterization scheme and extend it to an optimized second-order Trotterization for the time evolution in the Fermi–Hubbard model, specifically tailored for the limited qubit connectivity of quantum architectures, such as IBM's platforms. Notably, both Trotterization approaches are scalable and maintain a constant circuit depth at each Trotter step, regardless of the qubit count, enabling us to precisely investigate the relaxation dynamics in the Fermi–Hubbard model by measuring the expectation value of the Néel observable (staggered magnetization) for time-evolved quantum states. Lastly, our successful measurement of expectation values in such large-scale quantum many-body systems, especially at longer time scales with larger entanglement, highlights the quantum utility of superconducting quantum platforms over conventional classical approximation methods.

97 MATHEMATICS AND COMPUTING↗

Measurement of rabbit eardrum vibration through stroboscopic digital holography

In this work, we present a setup for high-power single shot stroboscopic digital holography and demonstrate it in an application on rabbit eardrum vibration measurement. The setup is able to make full-field time-resolved measurements of vibrating surfaces with a precision in the nanometer range in a broad frequency range. The height displacement of the measured object is visualized over the entire surface as a function of time. Vibration magnitude and phase maps can be extracted from these data, the latter proving to be very useful to reveal phase delays across the surface. Such deviations from modal motion indicate energy losses due to internal damping, in contrast to purely elastic mechanics. This is of great interest in middle ear mechanics and finite element modelling. In our setup, short laser pulses are fired at selected instants within the surface vibration period and are recorded by a CCD camera. The timing of the pulses and the exposure of the camera are synchronized to the vibration phase by a microprocessor. The high-power frequency-doubled Nd:YAG laser produces pulses containing up to 5 mJ of energy, which is amply sufficient to record single-shot holograms. As the laser pulse length is 8 ns and the smallest time step of the trigger electronics is 1 μs, vibration measurements of frequencies up to 250 kHz are achievable through this method, provided that the maximum vibration amplitude exceeds a few nanometers. In our application, middle ear mechanics, measuring frequencies extend from 5 Hz to 20 kHz. The experimental setup will be presented, as well as results of measurements on a stretched circular rubber membrane and a rabbit's eardrum. Two of the challenges when measuring biological tissues, such as the eardrum, are low reflectivity and fast dehydration. To increase reflectivity, a coating is applied and to counteract the undesirable effects of tissue dehydration, the measurement setup and software have been optimized for speed without compromising on the quality. Results of a repeatability test will be presented as well. Since the method measures the membrane motion as a function of time in small time steps, we do not only measure vibration amplitude like in time-average holography, but we can also measure non-linear elastic and transient behaviour. In conclusion, the combination of good spatial, depth and time resolution with the fast data acquisition and very wide frequency range make our technique applicable in a number of fields, including biological tissue vibrations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-service Inspection of Radioactive Waste Tanks at the Savannah River Site – 15410

Liquid radioactive wastes from the Savannah River Site (SRS) separation process are stored in large underground carbon steel tanks. The high level wastes are processed in several of the tanks and then transferred by piping to other site facilities for further processing before they are stabilized in a vitrified or grout waste form. Based on waste removal and processing schedules, many of the tanks will be required to be in service for times exceeding the initial intended life. Until the waste is removed from storage, transferred, and processed, the materials and structures of the tanks must maintain a confinement function by providing a barrier to the environment and by maintaining acceptable structural stability during design basis events, which include loadings from both normal service and abnormal (e.g., earthquake) conditions. A structural integrity program is in place to maintain the structural and leak integrity functions of these waste tanks throughout their intended service life. In-service inspection (ISI) is an essential element of a comprehensive structural integrity program for the waste tanks at the Savannah River Site (SRS). The ISI program was developed to determine the degree of degradation the waste tanks have experienced due to service conditions. As a result of the inspections, an assessment can be made of the effectiveness of corrosion controls for the waste chemistry, which precludes accelerated localized and general corrosion of the waste tanks. Ultrasonic inspections (UT) are performed to detect and quantify the degree of general wall thinning, pitting and cracking as a measure of tank degradation. The results from these inspections through 2013, for the 27 Type III/IIIA tanks, indicate no reportable in-service corrosion degradation in the primary tank (i.e., general, pitting, or cracking). The average wall thickness for all tanks remains above the manufactured nominal thickness minus 0.25 millimeter and the largest pit identified is approximately 1.70 millimeter deep (i.e., less than 10% through-wall). Improvements to the inspection program were recently instituted to provide additional confidence in the degradation rates. Thickness measurements from a single vertical strip along the accessible height of the primary tank have been used as a baseline to compare historical measurements. Changes in wall thickness and pit depths along this vertical strip are utilized to estimate the rate of corrosion degradation. An independent review of the ISI program methodology, results, and path forward was held in August 2009. The review recommended statistical sampling of the tanks to improve the confidence of the single strip inspection program. The statistical sampling plan required that SRS increase the amount of area scanned per tank. Therefore, in addition to the baseline vertical strip that is obtained for historical comparisons, four additional randomly selected vertical strips are inspected. To date, a total of 104 independent vertical strips along the height of the primary tank have been completed. A statistical analysis of the data indicates that at this coverage level there is a 99.5% confidence level that one of the worst 5% of all the vertical strips was inspected. That is, there is a relatively high likelihood that the SRS inspection program has covered one of the most corroded areas of any of the Type III/IIIA waste tanks. These data further support the conclusion that there are no significant indications of wall thinning or pitting. Random sampling will continue to increase the confidence that one of the worst 5% has been inspected. In order to obtain the additional vertical strips, and minimize budget and schedule impacts, data collection speed for the UT system was optimized. Prior to 2009, the system collected data at a rate of 32 square centimeters per minute. The scan rate was increased to 129 - 160 square centimeters per minute by increasing the scanner step and pixel sizes in the data acquisition set-up. Laboratory testing was utilized to optimize the scan index/pixel size such that the requirements for wall thinning and pit detection were still maintained. SRS continues to evaluate improvements to ultrasonic equipment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In-service inspection of radioactive waste tanks at the Savannah River Site - 15410

Liquid radioactive wastes from the Savannah River Site (SRS) separation process are stored in large underground carbon steel tanks. The high level wastes are processed in several of the tanks and then transferred by piping to other site facilities for further processing before they are stabilized in a vitrified or grout waste form. Based on waste removal and processing schedules, many of the tanks, will be required to be in service for times exceeding the initial intended life. Until the waste is removed from storage, transferred, and processed, the materials and structures of the tanks must maintain a confinement function by providing a barrier to the environment and by maintaining acceptable structural stability during design basis events, which include loadings from both normal service and abnormal (e.g., earthquake) conditions. A structural integrity program is in place to maintain the structural and leak integrity functions of these waste tanks throughout their intended service life. In-service inspection (ISI) is an essential element of a comprehensive structural integrity program for the waste tanks at the Savannah River Site (SRS). The ISI program was developed to determine the degree of degradation the waste tanks have experienced due to service conditions. As a result of the inspections, an assessment can be made of the effectiveness of corrosion controls for the waste chemistry, which precludes accelerated localized and general corrosion of the waste tanks. Ultrasonic inspections (UT) are performed to detect and quantify the degree of general wall thinning, pitting and cracking as a measure of tank degradation. The results from these inspections through 2013, for the 27 Type III/IIIA tanks, indicate no reportable in-service corrosion degradation in the primary tank (i.e., general, pitting, or cracking). The average wall thickness for all tanks remains above the manufactured nominal thickness minus 0.25 millimeter and the largest pit identified is approximately 1.70 millimeter deep (i.e., less than 10% through-wall). Improvements to the inspection program were recently instituted to provide additional confidence in the degradation rates. Thickness measurements from a single vertical strip along the accessible height of the primary tank have been used as a baseline to compare historical measurements. Changes in wall thickness and pit depths along this vertical strip are utilized to estimate the rate of corrosion degradation. An independent review of the ISI program methodology, results, and path forward was held in August 2009. The review recommended statistical sampling of the tanks to improve the confidence of the single strip inspection program. The statistical sampling plan required that SRS increase the amount of area scanned per tank. Therefore, in addition to the baseline vertical strip that is obtained for historical comparisons, four additional randomly selected vertical strips are inspected. To date, a total of 104 independent vertical strips along the height of the primary tank have been completed. A statistical analysis of the data indicates that at this coverage level there is a 99.5% confidence level that one of the worst 5% of all the vertical strips was inspected. That is, there is a relatively high likelihood that the SRS inspection program has covered one of the most corroded areas of any of the Type III/IIIA waste tanks. These data further support the conclusion that there are no significant indications of wall thinning or pitting. Random sampling will continue to increase the confidence that one of the worst 5% has been inspected. In order to obtain the additional vertical strips, and minimize budget and schedule impacts, data collection speed for the UT system was optimized. Prior to 2009, the system collected data at a rate of 32 square centimeters per minute. The scan rate was increased to 129 - 160 square centimeters per minute by increasing the scanner step and pixel sizes in the data acquisition set-up. Laboratory testing was utilized to optimize the scan index/pixel size such that the requirements for wall thinning and pit detection were still maintained. SRS continues to evaluate improvements to ultrasonic equipment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

I’ve Looked at Clouds from Both Sides, Now: Viewpoints from Surface and Spaceborne Lidar Systems

Clouds play a critical role in the Earth’s climate system because they are inextricably linked to the hydrological cycle and radiation budget. Information about cloud height, thickness, occurrence, and amount are critical inputs for a host of numerical applications involving climate research. Therefore, it is important to have highly accurate and quantitative data records of cloud properties that span several years and geographic regions. Verification of even the most basic modeling processes demands long term and continuous observations of global cloud occurrence, if there is to be any confidence in their fidelity. For a number of reasons, however, it is impossible to gauge the complexities of clouds from a single source. Fundamentally, an array of remote sensing methods is needed in order to provide a complete picture. Within the Micropulse Lidar Network (MPLNET), we have developed a new algorithm to improve the quality of our cloud products. The largest impact of the changes to the cloud detection algorithm is evident with high clouds (those with cloud base > 5 km). Furthermore, polarized measurements enable us to determine the cloud thermodynamic phase. Naturally, the next step is to investigate how these improvements compare with observations from spaceborne lidars (e.g. CALIOP) which have a better (unobstructed) view of high clouds. Recent advances in remote sensing have revealed that cirrus clouds are the most common cloud genus observed in the atmosphere. Furthermore, cirrus skew highly towards relatively low cloud optical depths, as observed from both surface and spaceborne viewpoints. The radiative impacts of these findings are quite significant, considering the cumulative effect cirrus exhibit when compared to low clouds.

Jasper R Lewis↗

NASA's Meteoroid Environments Office's Response to Three Significant Bolide Events Over North America

Being the only U.S. Government entity charged with monitoring the meteor environment, the Meteoroid Environment Office has deployed a network of all sky and wide field meteor cameras, along with the appropriate software tools to quickly analyze data from these systems. However, the coverage of this network is still quite limited, forcing the incorporation of data from other cameras posted to the internet in analyzing many of the fireballs reported by the public and media. A procedure has been developed that determines the analysis process for a given fireball event based on the types and amount of data available. The differences between these analysis process will be explained and outlined by looking at three bolide events, all of which were large enough to produce meteorites. The first example is an ideal event - a bright meteor that occurred over NASA's All Sky Camera Network on August 2, 2014. With clear video of the event from various angles, a high-accuracy trajectory, beginning and end heights, orbit and approximate brightness/size of the event are able to be found very quickly using custom software. The bolide had the potential to have dropped meteorites, so dark flight analysis and modeling was performed, allowing potential fall locations to be mapped as a function of meteorite mass. The second case study was a bright bolide that occurred November 3, 2014 over West Virginia. This was just north of the NASA southeastern all-sky network, and just south of the Ohio-Pennsylvania network. This case study showcases the MEO's ability to use social media and various internet sources to locate videos of the event from obscure sources (including the Washington Monument) for anything that will permit a determination of a basic trajectory and fireball light curve The third case study will highlight the ability to use doppler weather radar in helping locate meteorites, which enable a definitive classification of the impactor. The input data and analysis steps differ for each case study, but the goals remain the same - a trajectory, orbit, and mass estimate for the bolide within hours of the event, and, for events with a high probability of producing meteorites, a location of the strewn field within a day.

Blaauw, Rhiannon C.↗

Retrieval of Soil Moisture and Roughness from the Polarimetric Radar Response

The main objective of this investigation was the characterization of soil moisture using imaging radars. In order to accomplish this task, a number of intermediate steps had to be undertaken. In this proposal, the theoretical, numerical, and experimental aspects of electromagnetic scattering from natural surfaces was considered with emphasis on remote sensing of soil moisture. In the general case, the microwave backscatter from natural surfaces is mainly influenced by three major factors: (1) the roughness statistics of the soil surface, (2) soil moisture content, and (3) soil surface cover. First the scattering problem from bare-soil surfaces was considered and a hybrid model that relates the radar backscattering coefficient to soil moisture and surface roughness was developed. This model is based on extensive experimental measurements of the radar polarimetric backscatter response of bare soil surfaces at microwave frequencies over a wide range of moisture conditions and roughness scales in conjunction with existing theoretical surface scattering models in limiting cases (small perturbation, physical optics, and geometrical optics models). Also a simple inversion algorithm capable of providing accurate estimates of soil moisture content and surface rms height from single-frequency multi-polarization radar observations was developed. The accuracy of the model and its inversion algorithm is demonstrated using independent data sets. Next the hybrid model for bare-soil surfaces is made fully polarimetric by incorporating the parameters of the co- and cross-polarized phase difference into the model. Experimental data in conjunction with numerical simulations are used to relate the soil moisture content and surface roughness to the phase difference statistics. For this purpose, a novel numerical scattering simulation for inhomogeneous dielectric random surfaces was developed. Finally the scattering problem of short vegetation cover above a rough soil surface was considered. A general scattering model for grass-blades of arbitrary cross section was developed and incorporated in a first order random media model. The vegetation model and the bare-soil model are combined and the accuracy of the combined model is evaluated against experimental observations from a wheat field over the entire growing season. A complete set of ground-truth data and polarimetric backscatter data were collected. Also an inversion algorithm for estimating soil moisture and surface roughness from multi-polarized multi-frequency observations of vegetation-covered ground is developed.

Sarabandi, Kamal↗

Numerical and Experimental Investigations of Polyurethane Foam for Use as Cask Impact Limiter in Accidental Drop Scenarios - 12099

Rigid, closed-cell polyurethane foams are frequently used as cask impact limiters in nuclear materials and hazardous waste transport due to their high energy-absorption potential. When assessing the cask integrity in accidental scenarios based on numerical simulations, a description of the foam damping properties is required for different strain rates and for a wide temperature range with respect to waste heat generation in conjunction with critical operating and environmental conditions. Implementation and adaption of a respective finite element material model strongly relies on an appropriate experimental data base. Even though extensive impact experiments were conducted e.g. in Sandia National Laboratories, Savannah River National Laboratory and by Rolls Royce plc, not all relevant factors were taken into account. Hence, BAM who is in charge of the mechanical evaluation of such packages within the approval procedure in Germany, incorporated systematic test series into a comprehensive research project aimed to develop numerical methods for a couple of damping materials. In a first step, displacement driven compression tests have been performed on confined, cubic specimens at five loading rates ranging from 0.02 mm/s to 3 m/s at temperatures between +90 deg. C and -40 deg. C. Materials include two different polyurethane foam types called FR3718 and FR3730 having densities of 280 kg/m{sup 3} and 488 kg/m{sup 3} from the product line-up of General Plastics Manufacturing Company. Their data was used to adapt an advanced plasticity model allowing for reliably simulating cellular materials under multi-axial compression states. Therefore, an automated parameter identification procedure had been established by combining an artificial neural network with local optimization techniques. Currently, the selected numerical material input values are validated and optimized by means of more complex loading configurations with the prospect of establishing methods applicable to impact limiters under severe accidental conditions. The reference data base is provided by experiments, where weights between 212 kg and 1200 kg have been dropped from heights between 1.25 m and 7 m on confined 10 cm cubic foam specimens. By presenting the deviations between experimental values and the corresponding output of finite element simulations, the potentials and restrictions of the resulting models are highlighted. Systematic compression tests on polyurethane foams had been performed at BAM test site within the framework of a research project on impact limiters for handling casks for radioactive waste. The experimental results had been used to adapt numerical models for simulating the behaviour of different foam types at different temperatures. The loading speed, however, turned out to have a major influence on their flow curves that can not be captured by simple strain-rate dependent multipliers. Especially for guided drop tests that come close to real accidental scenarios there is a significant gap between experimental and numerical results even when applying such advanced material models. Hence, the extensive data base is currently deployed for expanding the standard algorithms to include adequate dynamic hardening factors. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modelling a compressible packed bed flow-through washing and deacetylation reactor for corn stover pretreatment

The deacetylation process is a key step in the lignocellulosic biomass pretreatment process that currently is done in batch reactors. A flow-through diffuser type reactor is a promising approach to make the process more efficient and economically favorable. A washing step before deacetylation can further reduce chemical usage and increase the process efficiency. However, the highly compacted biomass particles can cause significant pressure-drop for fluid flow through the bed, which in the worst case can cause self-enhancing pressure-drop leading to reactor blocking. Detailed understanding of the fundamentals of flow through a compressible packed bed is necessary to scale up the washing and deacetylation process. This work closely examines the classical Kozeny Carman equation and proposes modifications to accurately predict the pressure-drop at different compaction states. Here, a compressible packed bed model is further developed based on the interaction between solid mechanics and fluid dynamics. Experimental measurements of water flow through a packed bed of corn stover show good agreement with the developed model. Corn stover washing process scale up simulations show that smaller reactor diameter, higher friction lining material, lower process throughput, and higher process temperature is favorable in stabilizing the bed from extensive compression when the bed height is fixed.

09 BIOMASS FUELS↗

The Physical Origin and Magnetic Sensitivity of the Scattering Polarization Observed in the O i IR Triplet at 777 nm

The linearly polarized solar limb spectrum caused by the absorption and scattering of anisotropic radiation has a very rich diagnostic potential, given its sensitivity to the thermal, dynamic, and magnetic structure of the solar atmosphere. A crucial first step toward its scientific exploitation is understanding the physical origin of the observed spectral line polarization and its magnetic sensitivity via the Hanle and Zeeman effects. Here, we study the linear polarization signals observed in the IR triplet of O i at 777 nm, describing in detail the multilevel radiative transfer calculations that allowed us to decipher their physical origin. We investigate the sensitivity of the calculated scattering polarization signals to various modeling parameters, finding that the observed fractional linear polarization pattern originates mainly in the solar chromosphere, although the intensity profiles of the O i IR triplet come mainly from the lower photosphere. We find that the three lines are sensitive, via the Hanle effect, to magnetic fields with strengths between 0.01 and 30 G, in a extended region of the solar atmosphere. We show this through calculations of the response function to magnetic field perturbations in a semi-empirical model of the quiet Sun atmosphere. The dominant response of the linear polarization signals occurs at heights ∼1000 km above the visible model’s surface, which demonstrates that the scattering linear polarization signals of the oxygen IR triplet encode information on the magnetism of the solar chromosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$\tau$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$\tau$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The interstellar disk-halo connection in the spiral galaxy NGC 3079

We discuss the morphology and excitation of ionized gas in the nearby Sc galaxy NGC 3079. The almost edge-on orientation is ideal for studying the vertical structure of the gaseous disk, and especially the diffuse ionized medium (DIM) found between the bright H II regions. We used the Hawaii Imaging Fabry-Perot Interferometer (HIFI) to map 150,000 H-alpha + (N II) lambda lambda 6548, 6583 emission-line profiles across the entire disk, with resolution 70 km/s at subarcsecond steps, down to a flux level of approximately 10(exp -17) ergs/s/sq cm (EM approximately equal to 4 cm(exp -6) pc). The DIM contributes approximately 30% of the total disk H-alpha emission within a radius of 10 kpc. The DIM has broader emission lines and larger (N II) H-alpha flux ratios than the adjacent H II regions. Within a radius of 5 kpc, we find that the X-shaped filaments reported in previous studies emerge from the inner (R approximately equal to 1.5 kpc) disk, and rise more than 4 kpc above the disk plane. The morphology, kinematics, and excitation of the filaments suggest that they form a biconic interface between the undisturbed disk gas, and gas entrained in the wide-angle outflow. The DIM beyond 5 kpc radius is more vertically extended than the thick ionized disk detected in our Galaxy and in a few nearby edge-on systems. After correcting for dust, the vertical profile of this DIM has an exponential scale height of about 1.1 kpc, similar to that of the H I disk. The (N II) lambda 6538/H-alpha flux ratio of the DIM increases monotonically with vertical height, reaching unity for absolute value of z greater than or approximately equal to 2.5 kpc. The flux required to keep the DIM ionized at R = 8 kpc is similar to that near the solar circle of our Galaxy. Highly dilute radiation from O stars in the galactic plane probably maintains the DIM. The total mass of the DIM is of order 10(exp 8) - 10(exp 9) solar mass, representing less than 1% of the total dynamical mass of NGC 3079. Mechanical energy from intense star formation in the disk probably lifts the DIM above the disk. The several bubbles and filaments within 1 kpc of the disk plane is direct evidence for gas flow between the disk and halo.

Veilleux, Sylvain↗

A Sundial-Atlas Precursor to the TIMED Mission: A Quick-Response Global Investigation into Coupled Lower Thermospheric, Ionospheric, and Mesospheric Physics

The SUNDIAL-ATLAS effort was a global-scale investigation which responded to the science priorities of the ITM Panel, the Integrated SPD Strategy Implementation Plan as a whole, and the need for potential cost-saving design criteria for the TIMED mission. The investigation focused on coupling processes in the ionospheric-thermospheric system, taking advantage of the timelines of the ATLAS-1 mission (March 1992), and the global-scale ground-based measurement and modeling activities of the SUNDIAL program. The collaborative SUNDIAL-ATLAS activity was the first opportunity for global measurements of the chemistry, kinetics, and electrodynamics which couple the E-, Fl-, and F2-regions into a single interactive system. As such, the program represented an important first step in studying global issues; and accordingly, was an important proof of concept experiment relevant to the strategic mission plans for the ITM community and the upcoming intermediate class satellite program called TIMED. To meet its projected goals, TIMED must perform a number of critical measurements and execute a number of correlations that were to be tried and tested for the first time in the SUNDIAL-ATLAS investigation. This was designed to include global correlations of thermospheric and ionospheric composition during quiet and disturbed conditions and the co-registration of global-scale ground-based measurements with along-track satellite diagnostics. The SUNDIAL component of the current investigation addressed this need by acquiring, reducing, and analyzing a multi-sensor database that complemented and extended that which was generated in the ATLAS mission (Atmospheric Laboratory for Applications and Science). The SUNDIAL data defined the state and condition of the global-scale ionosphere in the altitude range from 100 km to the F2-peak. These data specified the peak heights and densities of the E-, Fl-, and F2-regions, along with the global distributions of intermediate, descending, and sequential layers which play a critical role in the dynamo region of the lower ionospheric-thermospheric domain. The data were collected by the SUNDIAL network of more than 50 ground-based stations utilizing ionosondes, radars, photometers, Fabry-Perot interferometers, and total electron content measurements. The data were acquired during a three-week period centered on the eight-day ATLAS-1 mission, which provided image and photometric sensing of the altitude distributions of the major and minor ions and neutrals in the ITM system. This report focuses on the scientific contributions of the SUNDIAL component of the overall investigation. Specific findings are described in seven papers (attached) published in the Journal of Geophysical Research.

Szuszczewicz, E. P.↗

Understanding Geospace on a Grand Scale: The Global Ionoshphere/Thermosphere Constellation

We present the concept of a constellation of polar orbiting satellites equally spaced in longitude (local time) to systematically sample both the neutral and ionzed gas components of the Earth in circular orbits near 350 km, including their density, temperature, and velocities. The instrumentation would include techniques to measure the height of the ionospheric "F-peak" and its variations along the orbit. The number of satellites (l2? 24? 48?) and their configuration would be determined from modeling analysis and expected geophysical phenomena, including their drivers and characteristic time scales. Together with imaging data from separate satellites, the array of satellites with in situ probes would be expected to provide a new picture of (1) high latitude electrodynamics and atmospheric processes and associated coupling with magnetospheric mass and momentum input, (2) the response of the global ionosphere and thermosphere to magnetic storms, and (3) global neutral wind circulation patterns, neutral density structure, tides, planetary waves, and gravity waves. The comprehensive measurements gathered by the IT-Constellation envisioned here would provide a major leap forward in each of these areas, addressing global physical processes and providing fundamental, new knowledge of Geospace. In particular, by its very nature, the constellation addresses "system science", revealing how the ionosphere-thermosphere connects globally to the magnetosphere above and the troposphere below. We present this concept as the next logical step in observing the "whole" space environment using in situ probes in conjunction with imagers. We invite modelers to not only comment on this concept but also to become actively engaged in helping to define it.

Pfaff, Robert↗

The Surface Water and Ocean Topography Satellite Mission - An Assessment of Swath Altimetry Measurements of River Hydrodynamics

The Surface Water and Ocean Topography (SWOT) satellite mission, scheduled for launch in 2020 with development commencing in 2015, will provide a step-change improvement in the measurement of terrestrial surface water storage and dynamics. In particular, it will provide the first, routine two-dimensional measurements of water surface elevations, which will allow for the estimation of river and floodplain flows via the water surface slope. In this paper, we characterize the measurements which may be obtained from SWOT and illustrate how they may be used to derive estimates of river discharge. In particular, we show (i) the spatia-temporal sampling scheme of SWOT, (ii) the errors which maybe expected in swath altimetry measurements of the terrestrial surface water, and (iii) the impacts such errors may have on estimates of water surface slope and river discharge, We illustrate this through a "virtual mission" study for a approximately 300 km reach of the central Amazon river, using a hydraulic model to provide water surface elevations according to the SWOT spatia-temporal sampling scheme (orbit with 78 degree inclination, 22 day repeat and 140 km swath width) to which errors were added based on a two-dimension height error spectrum derived from the SWOT design requirements. Water surface elevation measurements for the Amazon mainstem as may be observed by SWOT were thereby obtained. Using these measurements, estimates of river slope and discharge were derived and compared to those which may be obtained without error, and those obtained directly from the hydraulic model. It was found that discharge can be reproduced highly accurately from the water height, without knowledge of the detailed channel bathymetry using a modified Manning's equation, if friction, depth, width and slope are known. Increasing reach length was found to be an effective method to reduce systematic height error in SWOT measurements.

Wilson, Matthew D.↗

GADRAS Batch Inject Tool User Guide

Gamma Detector Response and Analysis Software (GADRAS) is used by the radiation detection and emergency response community to perform modeling and spectral analysis for gamma detector systems. Built into GADRAS is the ability to define a detector, geometry, background characteristics and source composition to generate synthetic spectra for drills and exercises (injects). Consequence Management is currently in development of a sample result data simulator tool in which a deposition model is probed for source conditions at moments in time and locations in space. These values are used to generate realistic sample results for use in drills and exercises. In addition to sample results, there is a need to simulate the actual spectra that would be observed in the field by downlooking HPGe instruments given a deposition activity. This way, the FRMAC Gamma Spectroscopist can practice their process of generating quantified results from spectra on realistic data as well. Recognizing the decades of work done in GADRAS to accurately generate synthetic spectra, this team decided to build a link between the new simulator and GADRAS to generate these spectra quickly and easily. The simulator tool will generate a file that specifies the name of the spectra, its location, date/time of measurement, duration of measurement, height off the ground, and the deposition activity and age for every radionuclide in the simulation. Then, a new tool within the Inject Tab of GADRAS was developed to read in this file given a detector selection and generate In-Situ spectra for each row in the file in any file format the user chooses. This way, simulation cell staff can take these files and then upload them to the appropriate data system (RAMS or RadResponder) for use during drills and exercises. An advanced feature of this tool allows for generating any spectra given an appropriate model and mapping of source to model layer in the batch inject tool. This way, spectra from field sample counts, mobile laboratories, or even fixed laboratories can be generated in bulk given an estimate of the radioactivity concentration or total radioactivity in an import file. This expands the capabilities of this tool a great deal and will make it a more useful tool for CM and others to help estimate detector response for nearly any situation. This user guide will explain the steps needed to perform a batch inject file generation.

61 RADIATION PROTECTION AND DOSIMETRY↗

High precision magnetic field measurement and mapping of the LEReC 180 degree bending magnet using very low field NMR with hall combined probe (140 - 350 gauss)

The Relativistic Heavy Ion Collider (RHIC) at BNL are using the Low Energy RHIC Electron Cooling (LEReC) to conduct experiments that search for the quantum chromodynamic (QCD) critical point. The first ever electron cooling based on the RF acceleration of electron beams was experimentally demonstrated on April 5, 2019 at LEReC at BNL. The first critical step in obtaining successful 3D non-magnetized cooling of the Au ion bunches in the RHIC cooling section was matching the electron beam energy with a relative error less than 5*10 -4 to the ion beam energy. Part of the LEReC beamline is a dipole magnet that bends the electron beam 180 degree. One of the most outstanding measurement challenges is that the dipole field is so low (≈200 G). Most of the existing NMR probes can only measure fields >400 G. Lower signal-to-noise ratio at low fields is requires the use of larger sample volumes. Working with CAYLAR, a NMR probe has been redesigned and optimized for these low field measurements with high resolution. We report the methods, challenges, and results for extensive magnetic field mappings of the 180 dipole magnet. A combination of NMR and Hall sensors has been successfully implemented to measure uniform field regimes inside the magnet center area and non-uniform field regimes at the magnet ends. Detailed measurement and mapping have been performed at five radii and five heights along the beam trajectory. Meanwhile a finite element magnetic modeling simulation of the magnet using Opera software has been performed. The calculated and measured data are compared, and the calculated data is good reference for measured data over long length mapping from magnet edge to center. The measured magnetic measurement data is directly useful for beam instrumentation, diagnostics and operation.

Magnetic Field Measurement↗

Long-term effects of thinning and woody control on longleaf pine plantation development, understory abundance, and tree damage from an ice storm

Longleaf pine (Pinus palustris) plantations have been established across the southeastern United States as the first step in restoring the declining savanna ecosystem, yet their long-term stability and development to open canopied woodlands may depend on early density and vegetation management treatments. Commercial thinning (CT) was applied in 2012 (year 18) to a long-term study of longleaf pine community restoration at the Savannah River Site near Aiken, SC to increase abundance of herb species. Although precommercial thinning (PCT) and woody vegetation control increased herb species cover during the first five years of the study, measurements from years 17 to 22 indicated a continuing decline in their cover since year 9 despite application of CT in year 18. Herb species richness, however, increased from 21 to 43 species per 100 m2 area during the last six years of the study, likely a result of disturbances associated with CT and an ice storm in year 20. Application of PCT in 1994, when the plantations were 8–11 years old, reduced their susceptibility to stem bending and breakage from the ice storm, which occurred 20 years later in 2014. Measured 5 months before the storm, pine height: dbh ratio (HD) averaged 78 and 90 for trees growing with and without PCT, respectively, and stem breakage (% of trees) from the ice storm increased linearly (r2 = 0.53) with HD. Pine mortality from the combined effects of glaze ice and wind differed with (28%) versus without (45%) PCT, indicating that long-term stability of longleaf pine plantations depends on early density management.

54 ENVIRONMENTAL SCIENCES↗